Report o.: FA590419-03 Table of Contents 1. GEERAL DESCRIPTIO... 1 1.1. EUT General Information...1 1.. Testing Location...1. MAXIMUM PERMISSIBLE EXPOSURE....1. Maximum Permissible Exposure..... MPE Calculation Method....3. Calculated Result and Limit...3 Report Format Version: 01 Page o. : i of ii
Report o.: FA590419-03 History of This Test Report REPORT O. VERSIO DESCRIPTIO ISSUED DATE FA590419-03 Rev. 01 Initial issue of report Mar. 04, 016 Report Format Version: 01 Page o. : ii of ii
Report o.: FA590419-03 1. GEERAL DESCRIPTIO 1.1. EUT General Information RF General Information Evaluation Mode Frequency Range Operating Frequency Modulation Type.4GHz WLA 400-483.5 41-46 80.11b: DSSS (DBPSK, DQPSK, CCK) 80.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) 80.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 56QAM) 5GHz WLA 5150-550 550-5350 5470-575 575-5850 5180-540 560-530 5500-570 5745-585 80.11a/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) 80.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 56QAM) Bluetooth 400-483.5 40-480 LE: DSSS (GFSK) 1.. Testing Location Testing Location HWA YA ADD : o. 5, Hwa Ya 1st Rd., Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. TEL : 886-3-37-3456 FAX : 886-3-37-0973 JHUBEI ADD : o.8, Lane 74, Bo-ai St., Jhubei City, HsinChu County 30, Taiwan, R.O.C. TEL : 886-3-656-9065 FAX : 886-3-656-9085 Report Format Version: 01 Page o. : 1 of 5
Report o.: FA590419-03. MAXIMUM PERMISSIBLE EXPOSURE.1. Maximum Permissible Exposure (A) Limits for Occupational / Controlled Exposure Frequency Range Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) (mw/ cm²) Averaging Time E ², H ² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 184 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) (mw/ cm²) Averaging Time E ², H ² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 84/f.19/f (180/f)* 30 30-300 7.5 0.073 0. 30 300-1500 F/1500 30 1500-100,000 1.0 30 ote: f = frequency in MHz ; *Plane-wave equivalent power density.. MPE Calculation Method The MPE was calculated at 4 cm to show compliance with the power density limit. The following formula was used to calculate the Density: E (V/m) = 30 P G d E = Electric field (V/m) E Density: Pd (W/m²) = 377 P = Peak RF output power (W) G = EUT numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to 30 P G Pd = 377 d Report Format Version: 01 Page o. : of 5
Report o.: FA590419-03.3. Calculated Result and Limit Exposure Environment: General Population / Uncontrolled Exposure For 5GHz Band: For Radio (Band 1+Band4): Type : Metal Conducted for IEEE 80.11ac MCS0/ss1 (VHT40): 4.10dBm ote: Directional (dbi) (numeric) The maximum combined Average Output (dbm) (mw) 4 5795 10.05 10.1158 4.1039 57.695 0.359730 1 Complies Directional 10 log For Radio 3 (Band 1+Band4): Type : Metal k SS AT Conducted for IEEE 80.11ac MCS0/ss1 (VHT0): 1.78dBm (dbi) j 1 1 g AT j, k Average Output (numeric) (dbm) (mw) 4 500 5.7 3.735 1.7800 150.6607 0.077730 1 Complies Report Format Version: 01 Page o. : 3 of 5
Report o.: FA590419-03 For Radio (Band +Band3) : Type : Metal Conducted for IEEE 80.11ac MCS0/ss1 (VHT40) UCII C:.85dBm ote: Directional (dbi) (numeric) The maximum combined Average Output (dbm) (mw) 4 5710 7.11 5.1404.8461 19.5793 0.136835 1 Complies Directional 10 log For Radio 3 (Band +Band3): Type : Metal k SS AT j 1 1 g AT Conducted for IEEE 80.11a: 1.9dBm (dbi) j, k Average Output (numeric) (dbm) (mw) 4 560 5.7 3.735 1.900 155.5966 0.08076 1 Complies For.4GHz Band: For Radio 1: Type : Metal Conducted for IEEE 80.11ac MCS0/ss1 (VHT0): 7.73dBm Directional (dbi) (numeric) The maximum combined Average Output (dbm) (mw) 4 437 7.0 5.0350 7.7336 593.4188 0.41999 1 Complies ote: Directional 10 log k SS AT j 1 1 g AT j, k Report Format Version: 01 Page o. : 4 of 5
Report o.: FA590419-03 For Radio 3: Type : Metal Conducted for IEEE 80.11b: 5.64 dbm (dbi) Average Output (numeric) (dbm) (mw) 4 437 4.3.7040 5.6400 366.4376 0.136958 1 Complies For Bluetooth function: For Radio 4 : Type : FIFA Conducted for Bluetooth 4.0: 1.6 dbm (dbi) Average Output (numeric) (dbm) (mw) 4 40 4.99 3.1550 1.600 1.451 0.000633 1 Complies Conclusion: Both of the Radio 1 (.4GHz WLA function) + Radio (5GHz WLA function) + Radio 3 (.4GHz WLA function) + Bluetooth can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD / LPD + etc. < 1 CPD = Calculation power density LPD = power density Therefore, the worst-case situation is 0.41999 / 1 + 0.359730 / 1 + 0.136958 / 1 + 0.000633 / 1=0.91030, which is less than 1. This confirmed that the device complies. Conclusion: Both of the Radio 1 (.4GHz WLA function) + Radio (5GHz WLA function) + Radio 3 (5GHz WLA function) + Bluetooth can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD / LPD + etc. < 1 CPD = Calculation power density LPD = power density Therefore, the worst-case situation is 0.41999 / 1 + 0.359730 / 1 + 0.08076 / 1 + 0.000633 / 1=0.853638, which is less than 1. This confirmed that the device complies. Report Format Version: 01 Page o. : 5 of 5