INNOVATIVE TIMBER FINISHES

INNOVATIVE TIMBER FINISHES 1

2 SIMPLY WOODCARE

Simply Woodcare by Haymes is a comprehensive range of innovative timber finishes combining the very latest technology and formulations to not only protect but also enhance the natural beauty of a wide range of timber. CONTENTS Preparation...4 Exterior Timber Finishes...5-10 Exterior Product guide...6 Simple Steps to a perfect Exterior Finish...7 Interior Timber Finishes...11-16 Interior Product guide...12 Simple Steps to a perfect Interior Finish...13 Interior colour range and stain guide...17 Exterior colour range and stain guide...19 3

PREPARATION Preparation is one of the most important jobs undertaken when preserving or enhancing timber. A poorly prepared or unclean surface will compromise the performance of any top coat you may apply, so it s important to follow all the relevant product preparation and application guidelines to get the best outcome for your timber project. Rapid Prep For new, unweathered exterior timber Simply Woodcare Rapid Prep is a dual-function, purpose-built application for new, unweathered exterior timber. Rapid Prep efficiently cleans, removes surface tannins, dirt, extractives, and possible mill glaze allowing for the application of finishing coats within 24 hours once dry. Decking and exterior timber surfaces. 300gm & 900gm Allows immediate coating onto new timber Simple one step preparation Wood Cleaner For weathered timbers Simply Woodcare Wood Cleaner cleans, revives, and restores grey and weathered* timber, removing tannin and water stains prior to coating. When cleaning weathered grey timber, let the surface soak for at least 30 mins by wetting with water prior to cleaning. For severely weathered grey timber a repeat application may be necessary. Decking, outdoor furniture, weatherboards, cladding, fences, and external timbers. 1 & 4 Litres (* Please note; Weathered timber requires a minimum of 6 weeks weathering) Wood Putty Interior + Exterior Our water-based interior/exterior timber filler dries hard within two hours and does not shrink or crack. Simply Woodcare Wood Putty comes in six colours to match your timber type and, once dry, can be coated with either water or solvent based finishes. Interior and exterior timber including flooring, decking, panelling, weatherboard, furniture, and trim. Can be used as a grain filler. 150gm & 500gm Colour range Pine Hardwood Walnut Jarrah Merbau Cedar 4 PREPARATION

EXTERIOR TIMBER FINISHES SIMPLY WOODCARE 5

EXTERIOR PRODUCT GUIDE Select the right product for your project Finding the right product for your project is vital. Whether you re looking for durability, quick dry or easy clean-up there is a Simply Woodcare product for you. If you re still unsure of the best product for you, speak with your woodcare expert at your local Haymes stockist. Visit haymespaint.com.au to find a stockist near you. UVEX Dexpress Decking Oil Use on Decking, cladding & weatherboards, outdoor furniture, doors & window frames, stairs & walkways, pergolas & screens Finish Satin Low Lustre Matt Number of Coats 3 2 2-3 Recoat (at 25 º C and 50% humidity) 2 Hours 2 Hours 6 Hours Clean up Water Water Mineral Turps Preparation Products Wood Cleaner / Rapid Prep, Uvex Primer Wood Cleaner / Rapid Prep Wood Cleaner / Rapid Prep Durability scale 6 EXTERIOR TIMBER FINISHES

Simple Steps to the Perfect Exterior Finish Timber preparation is vital for the performance of exterior timber coatings. For best results we recommend the removal of all unidentified previous coatings. 1 Clean OR Weather and Clean Clean new, bare, unweathered timber with Simply Woodcare Rapid Prep to remove surface tannins, dirt and extractives. Weather Weather timber for a minimum of 6 weeks to allow for natural leaching of tannins and extractives. Regularly hose the timber during this period to assist the leaching. Clean Clean with Simply Woodcare Wood Cleaner. This will also rejuvenate grey weathered timber. 2 Water Penetration Test 1. After cleaning sprinkle water onto the surface to identify if your timber is ready for coating. 2. Ensure the water penetrates the timber. 3. If the water doesn t penetrate and beads on the surface a repeat application of the cleaner is required. 3 Calculate Calculate the square metre area that you are coating to ensure that you have the correct amount of product for your project. This will help you achieve the expected lifespan from your timber finish. The example below is based on a deck 6m x 5m: 1. Calculate your decking area, 6m x 5m = 30m² 2. Divide 30m² by coverage rate^, (10m²/L) = 3L 3. You need 2 coats, 2 x 3 = 6L 4. 6L is required to achieve optimum coverage ^ Coverage rate can vary between products and can be found on the can or product data sheet. 4 Apply Ensure all surfaces are clean, bare, dry, and free of any contaminates prior to application. Apply your selected coating when the weather conditions are favourable. Ensure rain is not forecast for 24 hours. Use good quality brushes and application tools. When applying to decking or weatherboards work 2-3 boards along the length at a time. Ensure that all exposed edges and end grain are coated. EXTERIOR TIMBER FINISHES 7

WATER BASED EXTERIOR TIMBER FINISHES UVEX dual layer technology, our ultimate exterior timber finish dual layer system The Simply Woodcare UVEX Dual Layering system combines the UVEX Timber Primer for brilliant adhesion and surface preparation, with the unmatched protective qualities of UVEX Timber Finish. The system provides superior longevity and enhances the natural beauty of exterior timber with a transparent, satin finish. STEP 1 UVEX Timber Primer UVEX Timber Primer plays a vital role in the UVEX dual layer system. It provides adhesion, water repellence, mould and fungal protection while stabilising the timber surface to provide a sound foundation for the UVEX top coat, significantly improving durability. UVEX Timber Primer can also be used as a pre-treatment for joinery to temporarily protect timber against cracking, warping and deterioration, prior to the application of UVEX finish or any other Haymes water-based coating. Features Superior penetration & adhesion Timber stabiliser Water repellent Anti-fungal protection Quick drying Water-based Bare exterior timber Brush, decking brush, lambswool applicator. Up to 10m²/L 1, 4 & 10 Litres STEP 2 UVEX Timber Finish This premium finish protects exterior timber with industry leading technology. The UVEX Finish incorporates HALS Synergistic UV Protection delivering exceptional performance and protection for your timber. The end result will provide you with a long-lasting, low maintenance solution. Features Triple barrier UV protection Long-lasting timber protection Abrasion-resistant Mould-resistant Water-based Available in a range of natural timber tones All exterior timber including; decking, doors, windows, outdoor furniture, weatherboards, cladding, garage doors, walkways, fences and screens. Brush, decking brush, lambswool applicator Up to 12m²/L 1, 4 & 10 Litres 8 EXTERIOR TIMBER FINISHES

Dexpress Deck and Timber Stain superior decking finish The Hybrid Polymer technology in Simply Woodcare Dexpress delivers exceptional durability and UV resistance along with resistance to peeling, cracking and moisture absorption. This makes Dexpress perfect for enhancing the look and longevity of Australia s favourite hardwood and softwood decking timbers including Merbau, Spotted Gum and Treated Pine. This two-coat low lustre finish is easy to apply, fast-drying and washes up quickly in water. Proven to withstand the harsh Australian climate Abrasion-resistant Water-repellent UV & mould resistant Quick-drying Water-based TIP: You can increase performance by using a colour that matches the type of timber. For example, using Dexpress Merbau on Merbau timber. Decking, weatherboards, outdoor furniture, cladding, doors, window frames, walkways, fences, screens, pergolas and external timber. Brush, decking brush, lambswool applicator Up to 12m²/L 1, 2, 4 & 10 Litres Slip Resist Non-slip technology Simply Woodcare Slip Resist is a slip resistant additive which creates a non-slip surface. Ideal for use on interior and exterior timber where a slip resistant finish is required. Slip Resist is suitable for use on decking, ramps, walkways, stairs, and landings. COMPLIES WITH AS 4586: 2013 Slip resistance classification of new pedestrian surface materials. SUITABLE FOR USE WITH: UVEX Timber Finish, Dexpress, Aqualac Floor Satin and Easy Floor Satin only. 150gm EXTERIOR TIMBER FINISHES 9

OIL BASED EXTERIOR TIMBER FINISHES Decking Oil Featuring an advanced formulation to repel water, mould, algae and UV rays, this oil-enriched finish penetrates to nourish the timber. Decking Oil preserves and protects the timber from the destructive effects of weathering. Decking Oil is also tintable to a wide range of colours, making it ideal for use as a decking and exterior stain. Water-repellent Mould & fungus resistant Will not crack or peel TIP: Decking requires higher maintenance than other areas due to its UV exposure and frequent high traffic. Regular applications will protect your deck against UV damage, keeping it looking new for longer. Decking, outdoor furniture, walkways, steps, fences, gates, screens, doors, window frames and external timber. Brush, lambswool applicator Up to 10m²/L 1, 4 & 10 Litres General Purpose Clear Our Exterior General Purpose high-gloss clear finish incorporates advanced UV protection for enhanced, long-lasting performance. It dries to a tough, hard-wearing finish and offers excellent protection against the elements. You can apply it directly, or it can also act as an additional protective barrier after staining with Simply Woodcare Exterior Decking Oil and Stain Tint. Tough hard wearing finish UV protection Salt-resistant Oil-enriched High gloss finish Oil-based All exterior timber; windows, doors, panelling, furniture, trim and selected marine applications. Brush, roller or spray Up to 12m²/L 500ml, 1, 4 Litres 10 EXTERIOR TIMBER FINISHES

INTERIOR TIMBER FINISHES SIMPLY WOODCARE 11

INTERIOR PRODUCT GUIDE Select the right product for your project When choosing the right product for your interior project, whether it be flooring, or furniture, wood panelling or benchtops, many things should be taken into consideration, particularly finish and durability. FLOORING Easy Floor Aqualac Floor Tung Oil Finish Use on Flooring, stairs, furniture, doors & window frames, wall panelling, trim & benchtops Finish Satin or High Gloss Satin or Gloss Satin Lustre Number of Coats 3 3 3 Recoat (at 25 º C and 50% humidity) 16 hours 3 Hours 16 hours Clean up Mineral Turps Water Mineral Turps Odour Medium Minimal Medium Durability scale CLEARS Interior General Purpose Clear Aqualac General Purpose Clear Danish Oil Use on Furniture, doors & window frames, wall panelling & trim Finish Satin or High Gloss Satin or Gloss Natural Matt Number of Coats 2 2 2 Recoat (at 25 º C and 50% humidity) 16 hours 3 Hours 16 hours Clean up Mineral Turps Water Mineral Turps Odour Medium Minimal Medium Durability scale 12 INTERIOR TIMBER FINISHES

Simple Steps to a Stunning Interior Finish It is important to apply your chosen finish with quality tools including the correct brushes, rollers or applicators to suit the project and product, to ensure you acheive the best possible result. 1 Sand Sanding is key to achieving a professional finish! Always sand in the direction of the grain, using the right grade of sandpaper until smooth to touch. Remove dust with a tack cloth, damp cloth, or vacuum. Ensure that timber is clean and free of wax grease and contaminants before proceeding to the next step. TIP: For uneven flooring we recommend sanding in a diagonal direction with 80 grit first and then finish with a fine sandpaper (240 grit), sanding in the direction of the grain. 2 Fill If necessary, we recommend filling nail holes, cracks, and knot holes in the timber with Simply Woodcare Wood Putty matched to the timber colour after the first coat has been applied. 1. Apply putty with a recommended filling applicator, wiping off the excess with a soft damp cloth. 2. Allow to dry and sand smooth. 3 Apply Stir the product with a broad flat stirrer prior to application, including the bottom of the can. DO NOT SHAKE. Ensure you follow specifications for coverage and application procedures. Apply in the direction of the timber grain along the length of the board, coating 3-4 boards at a time. Ensure there is good ventilation/airflow after the coating has tacked off. Allow to dry then sand smooth. Ensure the surface is vacuumed thoroughly in between coats. Repeat the process for any subsequent coats. INTERIOR TIMBER FINISHES 13

WATER BASED INTERIOR FLOOR FINISHES Aqualac Floor This tough, non-yellowing, interior water-based urethane dries quickly with minimal odour to a completely clear finish. Excellent scratch and scuff resistance makes it ideal for cork, parquetry or timber floors and bench tops. Being a water-based formulation, it dries extremely fast and offers the convenience of water wash-up. Low odour Quick-drying Scuff resistant Non-yellowing Easy to use Water-based Interior timber, MDF, cork and parquetry flooring and stairs where a hard-wearing, nonyellowing finish is required. It is also suitable for furniture, bench tops, doors & skirting boards. Brush, mohair roller or lambswool applicator Up to 14m²/L 1, 4, 10 Litres Available in Satin and Gloss Aqualac Floor Non-Slip Aqualac Floor Non-Slip Finish is a premixed slip resistant product ideal for use on stairs, walkways, landings, and interior timber where a slip resistant finish is required. Apply only as a final coat in conjunction with Aqualac Floor Satin. Please refer to product data sheet for further information. COMPLIES WITH AS 4586: 2013 Slip resistance classification of new pedestrian surface materials. Apply as final coat to achieve P4 rating. 1 & 4 Litres only Available in Satin only 14 INTERIOR TIMBER FINISHES

OIL BASED INTERIOR FLOOR FINISHES Easy Floor Simply Woodcare Easy Floor features a modified urethane formulation that delivers excellent elasticity and a tough, durable finish that s suitable for high traffic areas. The chip-resistant finish provides superb resistance to abrasion, scuffing and wear-and-tear, while also resisting alcohol spills. Unlike many traditional oil-based finishes, Easy Floor doesn t become brittle over time. Anti-abrasion formula Alcohol resistant Single pack Easy to clean Simple to use Solvent-based Interior timber, cork and parquetry floors where a hardwearing finish is required. It is also suitable for furniture, bench tops, doors, skirting boards and stairs. Brush, mohair roller or lambswool applicator Up to 15m²/L 1, 4, 10 Litres Available in Satin and Gloss Easy Floor Non-Slip Easy Floor Non-Slip Finish is a premixed slip resistant product ideal for use on stairs, walkways, landings, and interior timber where a slip resistant finish is required. Apply only as a final coat in conjunction with Easy Floor Satin. Please refer to product data sheet for further information. COMPLIES WITH AS 4586: 2013 Slip resistance classification of new pedestrian surface materials. Apply as final coat to achieve P4 rating. 1 & 4 Litre Available in Satin only Tung Oil Finish Simply Woodcare Tung Oil Finish is a high-quality tung oil blend, natural look finish designed to enhance the natural beauty of timber. It will not crack, chip or bond timber edges together and offers easy maintenance with simple re-application. Simply Woodcare Tung Oil Finish can be polished with a floor polish if desired. Will not crack or chip Enhances and protects Easy to maintain Satin lustre finish Solvent-based TIP: A gloss finish will give a shiny appearance and provide depth and clarity, highlighting the timber s natural features. A satin finish will give low lustre sheen, perfect for hiding marks and dust. Interior timber, cork and parquetry floors. It is also suitable for stairways, furniture, bench tops, doors, skirting boards and panelling. Brush, mohair roller or lambswool applicator Up to 15m²/L 1, 4, 10 Litres INTERIOR TIMBER FINISHES 15

INTERIOR CLEAR FINISHES Aqualac GP Clear This general purpose 100% acrylic lacquer is easy to apply, hard-wearing and has minimal odour. So it s great for just about anything indoors. There s no yellowing, just a crystal clear finish that s touch dry in 20 minutes. It s ideally suited for lighter coloured timbers and offers the added convenience of water wash-up. Low-odour Quick drying Hard-wearing Non-yellowing Easy to use Water-based Interior wood panelling, MDF, furniture, feature walls, doors, windows, skirting boards, architraves, cupboards and trims. Brush, mohair roller or airless spray Up to 15m²/L 500ml, 1, 4 Litres Available in Satin and Gloss General Purpose Clear Suitable for use on natural or stained interior surfaces, this high quality General Purpose Clear Finish is resistant to heat, steam and general household spillages. It is single pack, mineral turpentine-based and made to exacting specifications that will highlight the natural beauty of your timber. Tough, durable finish Resistant to heat & steam Enhances timber appearance Protects timber grain Easy to clean Solvent-based All interior timber, ply, veneer including; panelling, furniture, feature walls, doors, windows, skirting boards, architraves, cupboards and trims. Brush, mohair roller or spray Up to 15m²/L 250ml, 500ml, 1, 4 Litres Available in Satin and Gloss Danish Oil Simply Woodcare Interior Danish Oil is a premium quality, natural looking clear oil that uses modified urethanes in its formulation. It s easy to apply and offers great wood penetration to produce a lowlustre finish. Abrasion-resistant Natural oil finish Penetrates into timber Low-lustre finish Easy to maintain Solvent-based All interior timber, ply, veneer including; panelling, furniture, feature walls, cupboards, architraves and trims. Brush, mohair roller, or applicator pad Up to 10m²/L 500ml, 1, 4 Litres 16 INTERIOR TIMBER FINISHES

INTERIOR STAINS Wood Stain This high quality, ready-for-use, oil-based stain adds colour to transform your timber, enhancing the natural grain. It s especially suitable for pine, ash and other light coloured furniture timbers and is available in a range of modern and traditional colours. Simple and easy to apply, our wood stain should be over-coated with a Simply Woodcare water-based or oil-based clear to protect the surface and increase the durability and longevity of the stain. Enhances timber grain Ready for use Simple to apply Solvent-based TIP: When staining, ensure you test your colour on an off-cut or inconspicuous area before applying to the project. All interior timber, ply, veneer including; panelling, furniture, feature walls, doors, windows, skirting boards, architraves, cupboards, bench tops and trims. Brush, cloth or foam applicator Up to 12m²/L 250ml, 500ml, 1 Litre INTERIOR STAINS RADIATA PINE Ebony Walnut Mahogany Jarrah Blackwood * Colours, stains and visual images shown are as close to actual colour that printing processes allow. All samples are representations only. Teak Cedar Maple Baltic Pine Liming White INTERIOR FINISHES HARDWOOD Water-based Solvent-based Water-based products are non-yellowing, making them perfect for light-coloured timber. Solvent-based products are great for enhancing coloured timber as they darken slightly with age. 17

EXTERIOR COLOUR RANGE CHARCOAL BROWNS GREYS Silver Ash Wenge Chocolate Rose Walnut Iron Grey Mint Grey Charcoal Ebony Dark English Tea Deep Walnut Wedgewood Weathered Grey Licorice Just Black English Tea Deep Earth Silver Grey Grey Leaf RUSTIC TRADITIONALS Silver Leaf Grey Wash Cedar Light Oak Barren Plains Sand Dark Oak Eucalypt Soft Stone Admiralty Grey Jarrah Moccha Beige Stone Caramel Merbau 19

EXTERIOR DECKING & STAINS DECKING OIL & STAIN EXTERIOR GP CLEAR UVEX TIMBER FINISH UVEX TIMBER PRIMER DEXPRESS DECK & TIMBER STAIN INTERIOR FLOORING FINISHES AQUALAC FLOOR NON-SLIP TUNG OIL FINISH AQUALAC FLOOR EASY FLOOR NON-SLIP EASY FLOOR INTERIOR FINISHES INTERIOR GP CLEAR WOOD STAIN AQUALAC GP CLEAR DANISH OIL PREPARATION WOOD CLEANER SLIP RESIST RAPID PREP WOOD PUTTY STOCKIST: Colours, stains and visual images shown in this brochure are as close to actual colour that printing processes allow. All samples are representations only. Final appearance of semi-transparent or transparent stains are affected by wood type, application methods and prevalent conditions. We recommend a test area is applied to any given wood type prior to final colour choice. Credits: Urban Angles photography, styling by Natalie James. Printed on pulp sourced from responsibly managed forests, acid free, elemental chlorine free ISO14001 EMS stock and FSC certified and colour accredited printer. ABN 14 004 201 638. For further information visit simplywoodcare.com.au or Freecall Service Express on 1800 033 431.