Plus Series & Feature 1. Plus Series using top quality material, such as Epistar chip. 2. Seamless, uniform and comfortable lighting up to 20M run length illumination. 3. Advanced silicon extrusion process makes high grade appearance, more flexible bend, strong impact resistant IK07, high weather resistance and small color shift after seal. 4. Dimmable available. 5. Indoor usage in IP40 basically, outdoor usage in IP65 rating with additional gluing process. 6. Supporting on field accurate cutting operation with visual mark from clear window. 7. 50,000h long lifespan, 5 years warranty, UL & TUV-CE approval. Application 1. Decoration for showcase, advertising, displayer board. 2. Lighting for hotel, garden, bridge. 3. Corridor, ceiling, stair, path way. 4. Signage, architecture lighting.
Dimension / Diagram ( ) ( )
General Parameters (LED driving method: constant current with IC) Part No. Dimension Standard Min. Unit LED Material/ LED QTY IP Application Lifespan Warranty Length (La) (L1) Type Color (La) Rate Condition W16*H15mm 5M 10M SMD2835 W10*H20mm 5M 10M SMD3014 silicon extrusion (Operating Ambient) 50,000h IP40 Ta: -20~45 (L70B50@ (Red/Green/Blue/ W16*H15mm 5M/10M 50mm SMD3528 120LED/M / RH: <75% Tc<65, Tc 5 years Yellow/Orange/Pink/ IP65 is the temp. Amber/Purple) (Installation of LED pin) Ambient) (Red/Green/Blue/ W10*H20mm 5M/10M SMD3528 Ta: 0~45 Yellow/Orange/Pink/ Amber/Purple) Photoelectric Parameters (LED driving method: constant current with IC) Power Operating LED IP20 CRI80, 3000K CRI90, 3000K CRI95, 3000K Beam Part No. ±10% (La) Voltage Current LED CCT / Luminous Flux Light Efficiency Luminous Luminous Angle Wavelength ±10% (La) (La) Flux±10% (La) Flux±10% (La) 14W/M 30mA 800lm/M 58lm/W 2700~6500K 540lm/M 60lm/W 14W/M 30mA 600lm/M 43lm/W 2700~6500K 405lm/M 45lm/W 120 /180 120 /240 (Red) 200lm/M \ \ 120 /180 620~630nm (Red) 110lm/M \ \ 120 /240 (Green 500lm/M \ \ 120 /180 520~530nm (Green 250lm/M \ \ 120 /240 (Blue) 120lm/M \ \ 120 /180 24VDC 460~470nm (Blue) 60lm/M \ \ 120 /240 (Yellow) 80lm/M \ \ 120 /180 580~590nm (Yellow) 60lm/M \ \ 120 /240 (Orange) 80lm/M \ \ 120 /180 600~610nm (Orange) 60lm/M \ \ 120 /240 (Pink) 310lm/M \ \ 120 /180 (Pink) 230lm/M \ \ 120 /240 (Amber) 580lm/M \ \ 120 /180 1500~1700K (Amber) 430lm/M \ \ 120 /240 (Purple) 10lm/M \ \ 120 /180 390~410nm (Purple) 7lm/M \ \ 120 /240
Part No. Dimension Standard Length (La) (LED driving method: limited current with resistor) Min. Unit (L1) LED Type Material/ Color LED QTY (La) IP Rate Application Condition Lifespan Warranty (Red/Green/Blue/ Yellow/Orange/Pink/ Amber/Purple) W16*H15mm W10*H20mm W16*H15mm 5M 10M 20M 5M 10M 20M 5M/10M 20M 50mm SMD2835 SMD3014 SMD3528 silicon extrusion 120LED/M IP40 / IP65 (Operating Ambient) Ta: -20~45 RH: <75% (Installation Ambient) Ta: 0~45 50,000h (L70B50@ Tc<65, Tc is the temp. of LED pin) 5 years (Red/Green/Blue/ W10*H20mm 5M/10M SMD3528 Yellow/Orange/Pink/ Amber/Purple) 20M Part No. (Red (Red (Green) (Green) (Blue) (Blue) (Yellow) (Yellow) (Orange) (Orange) (Pink) (Pink) (Amber) (Amber) (Purple) (Purple) Photoelectric Parameters (LED driving method: limited current with resistor) Power ±10% (La) 14W/M Operating Voltage 24VDC LED Current 30mA IP20 CRI80, 3000K CRI90, 3000K CRI95, 3000K Beam LED CCT / Wavelength Luminous Flux ±10% (La) 800lm/M Light Efficiency 2700~6500K 540lm/M 60lm/W (La) 58lm/W 248lm/M 62lm/W 14W/M 30mA 600lm/M 43lm/W 2700~6500K 405lm/M 45lm/W 188lm/M 47lm/W Luminous Flux±10% (La) Luminous Flux±10% (La) 200lm/M \ \ 620~630nm 100lm/M \ \ 110lm/M \ \ 60lm/M \ \ 500lm/M \ \ 520~530nm 232lm/M \ \ 250lm/M \ \ 120lm/M \ \ 120lm/M \ \ 460~470nm 64lm/M \ \ 60lm/M \ \ 4W/M 10MA 36lm/M \ \ 80lm/M \ \ 580~590nm 44lm/M \ \ 60lm/M \ \ 4W/M 10MA 36lm/M \ \ 80lm/M \ \ 600~610nm 44lm/M \ \ 60lm/M \ \ 4W/M 10MA 36lm/M \ \ 310lm/M \ \ 145lm/M \ \ 230lm/M \ \ 4W/M 10MA 108lm/M \ \ 580lm/M \ \ 1500~1700K 264lm/M \ \ 430lm/M \ \ 4W/M 10MA 204lm/M \ \ 10lm/M \ \ 390~410nm 4.8lm/M \ \ 7lm/M \ \ 4W/M 10MA 4lm/M \ \ Angle 120 /180 120 /240 120 /180 120 /240 120 /180 120 /240 120 /180 120 /240 120 /180 120 /240 120 /180 120 /240 120 /180 120 /240 120 /180 120 /240 120 /180 120 /240
Light Distribution Diagram General Characteristics (1) Visible transparent window allows cutting mark identification as normal strip.
(2) Waterproof cable combined with SR plug in one injection mould, front cap with power fed on one side, end cap on another side, to achieve IP40 or IP65 rating. (3) Multiple wiring methods available: tail side, edge side and bottom side.
(4) Board-to-board split joint available. (5) Multiple surface mounting methods available: bracket, clip and aluminum channel.
Connection Non-dimmable Method Dimmable Method
Accessories Part No. Wiring Method Power Feeder Cable To PSU Power Feeder Cable To Neon Front Cap Split Joint End Cap Mounting Method tail side bracket edge side clip bottom side 300mm waterproof cable aluminum channel with male plug tail side bracket edge side clip bottom side aluminum channel
Notice 1. 2. 3. 4. 5. 6. Please apply different IP rate products according to different environment conditions. Adopt suitable power supply to match the LED strips. Power is 20% bigger than max power of LED strips to ensure long time performance of power supply. Do not install it when power is on. Before powering on, make sure the wiring is correct. Avoid privately changing or damagingg the circuit or other component on the strip. Minimal bending radius definition, for is 150mm and for is 50mm, too small bending radius will break the inner LED strip. Avoid scrape, twist and irregular bend during installation, it might be damaged with non repairable status.
7. 8. 9. Strip linked in over long length would lead to problem of overload or uneven brightness. To protect your eyes, do not stare at the light for a long time while it's illuminated. Only professional personnel can install, dismantle and repair.