M MetPak HM Header Modular/scalable format IEC 61076-4-101 Press-fit or solder tail version 101 mated lines per linear inch Ships with protective cap, which also serves as an insertion tool End-to-end stackable with 8 row M MetPak HM and HSHM products See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.mconnector.com for compliance information Date Modifi ed: November 16, 2010 Sheet 1 of Physical Insulation: Material: High Temperature Thermoplastic (LCP) Flammability: UL 94V-0 Color: Material: Copper Alloy Plating: See Ordering information Marking: M Logo, Part Number, Revision, Date Code Performance Mechanical: Normal Force (Nominal): 0.57 N [58 g] Signal Engagement Force (Nominal): 0.2 N [ g] Signal Separation Force (Nominal): 0.20 N [20 g] Signal Wipe (Nominal, Shortest Contact): 2.67 mm [0.105 in] Signal Mate/Unmate Cycles: 250 Application: This module is not suitable for stand-alone use. (Refer to IEC-61076-4-101) Electrical: Current Rating (Fully Loaded): 1 A @ 70 C Signal Insulation Resistance: 1 x 10 4 MΩ @ 100 V DC Withstanding Voltage: 750 V rms Environmental Temperature Rating: -55 C to 125 C Process Rating: Maximum 260 C (per J-STD-020C) Withstanding Voltage: 1 (per J-STD-020C) UL File No.: E68080 MetPak is a trademark of M Company. http://www.mconnector.com M is a trademark of M Company. 800-225-57
M MetPak HM Header ROW I ROW H ROW G ROW F ROW E ROW D ROW C ROW B 24.92.981 Pin positions 1 2 4 5 6 7 8 9 10 11 18.00.709 mm (Inch) Tolerance Unless Noted 0 0.0 0.00 mm ± ±0. ±0.1 [ ] Dimensions for Reference Only ROW A ROW Z 20.00.787 21.40.84 4.50.177 Signal Contacts 15.00.591 5.00.197 15.15.596 HM-HXXXXX-8XPX-XXXXX REV X XXYY DIM A 1.40.528 DIM B Shown with protective caps* * Caps to be removed after press-fit installation process DIM A = Pin mating length DIM B = Pin tail length Ordering Information HM - H088FR1-8CX1 - XXXXX HM - H110FR2-8BX1 - XXXXX (rows I and Z not loaded) (rows I and Z loaded 8. mm mate length) Tail Style: P = Press-fit tail S = Solder tail Standard configuration DIM A = 5. mm for rows A through H DIM B = 4.4 mm For non-standard configurations contact sales representative http://www.mconnector.com Plating μm [ μ ]: TG0 = 0.76 [0] Min. Au Contact Area Standard Option TG0L = 0.76 [0] Min. Au Contact Area, Lubricated Typically higher make order quantities as compared to TG0. TG50 = 1.27 [50] Min. Au Contact Area, Lubricated Non-Standard Option (Available with longer lead times and higher make order quantities, MOQ) Sheet 2 of M is a trademark of M Company. 800-225-57
M MetPak HM Header Ø Ø DIM D 0.10 M A B Plated thru holes I H G F E D C B A Z 11 10 9 8 7 6 5 4 2 1 20.00 A.00 6.00 Ø +.05 0 Ø 0.10 A B 18.00 B Recommended PCB hole mounting pattern Hole Plating Table Finished Hole Dia. D Cu. Thickness SnPb Thickness Drilled Hole Dia. 0.550-0.650 [.0217 -.0256] 0.025-0.045 [.0010 -.0018] 0.008-0.018 [.000 -.0007] 0.686-0.727 [.0270 -.0286] Sheet of http://www.mconnector.com M is a trademark of M Company. 800-225-57
Important Notice All statements, technical information, and recommendations related to M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at M s option, to replace or repair the M product or refund the purchase price of the M product. Except where prohibited by law, M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this M product, regardless of the legal theory asserted. M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-57 www.mconnector.com Please recycle. Printed in USA. M 2010. All rights reserved. RIA-2217B-E M is a trademark of M Company.
Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: M: HM-H088FR1-8CP1-TG0L HM-H110FR2-8BP1-TG0