Specifications Environmental Line Line Green Line Analog ertifications UL Listed, SA Approved, and E Marked for all applicable directives Features S Wide selection for increased application flexibility S Quick-disconnect design reduces down time -- No disruption of alignment or wiring S Three power base styles: -- Terminal base can eliminate need for separate junction box -- m ( ft) cable base for lower profile (red and blue line only) -- Pre-wired mini-style quick-disconnect (green line only) S False turn-on pulse protection S Switch selectable light or dark operating mode S Adjustable sensitivity S hoice of relay or solid--state outputs S Highly visible LED output indicator Operating Environment Operating Temperature [ (F)] NEMA,,, ; IP - + (- + ) for TRIA output - + (- + ) for all others - + (- + ) Vibration Hz, mm amplitude, meets or exceeds IE 97 - - - + (- + ) for EM relay - + (- + ) for solid state Shock g with ms pulse duration, meets or exceeds IE 97 - - Relative Humidity Ambient Light Immunity Optical Sensing Modes 9% max Incandescent light: lux - + (- + ) Retroreflective, diffuse, long range diffuse, fiber optic, background suppression, transmitted beam (see Product Selection table on page -) Sensing Range See Product Selection table on page - Field of View See Product Selection table on page - Light Source Electrical Visible red LED ( nm), infrared LED ( nm) Voltage V D, V A (see Product Selection table on page -) urrent onsumption Depends on power base (see Product Selection table on page -) Sensor Protection s False pulse Response Time ms ms Reverse polarity and false pulse False pulse Determined by plug-in module False pulse, short circuit ms Type PNP and NPN, FET,SPDT relay,tria, analog output (see Product Selection table on page -) Mode Light or dark operate selectable, selectable positive or negative slope for analog models (see Product Selection table on page -) urrent ma A max ma Leakage urrent Mechanical Housing Material Lens Material Determined by plug-in module ma max μa μa Valoxr Acrylic (glass on polarized models) onnection Types See Product Selection table on page - Supplied Accessories None Optional Accessories See mounting brackets, reflectors, and cordsets on page - See Product Selection table User Interface Panel Label olor State Status OFF ON Sensor output de-activated Sensor output activated -
Plug-In Module (required for green line only) Type apacity Max Leakage urrent Response Time at. No. SPDT EM-Relay A, V A/ A, V A SP -N.O. FET SS Relay ma ont./ V A/D SP -N.O. A Power TRIA SS Relay.7 A ont. A Inrush/ V A NPN and PNP ma V D ms On ms Off -9-9 ma ms -9 ma ms -9 μa ms -9 Plug-In ontrol Function Module (optional for green line only) Function On and/or Off Delay Adjustable Time Delay (s) On.. Off.. One-Shot Motion Detector Adjustable Dwell (s) at. No. -79.. -79.. -79.. -79. -79.. -79. -797 Add sensor and output response time for total response time. Use with MTB-- base ONLY. Other output modules will not function with base. Line Wiring Diagrams With LR -, LR -,,, EM Relay N L L Solid State Relay L L With able Style LR -, LB LTB - V A /Hz LTB - V A /Hz LR -,,, LB LTB - V A /Hz LTB - V A /Hz Note: V A /HZ White L L N Yellow EM Relay V A /HZ White L L No onnection Yellow Isolated Solid State Details of connection of Allen-Bradley photoelectric sensors to Allen-Bradley Programmable ontrollers can be found in publication -.. Refer to www.ab.com/literature for more information. -
Line Wiring Diagrams. DTB - able Style, DB - ( ) (+) V D (+) V D ( ) Shield Grey NPN onnection (Sinking) (+) able Style Load (+) V D PNP onnection (Sourcing) (+) able Style (+) V D Grey Load Green Line Wiring Diagrams With MRL Photohead With EM Relay Module Photohead MRR MRU MRP MRA With Solid State Module MRR Photohead MRU MRP MRA With NPN and PNP Module MRR Photohead MRU MRP MRA +L - L N +L - L MTB - MTB - MTB - MTB - MTB - V A VA V A/D V A V D MTB - MTB - MTB - MTB - MTB - V A V A V A/D V A V D MTB - MTB - MTB - MTB - Only V A V A V A/D V A MTB - Only V D With Mini Quick-Disconnector Style MTB- QD- MTB- QD- With EM Relay Module (PNP) White (NPN) Brown ( + ) (N) L White () Brown ( + ) L (ommon) Note: Details of connection of Allen-Bradley photoelectric sensors to Allen-Bradley Programmable ontrollers can be found in publication -.. Wire colors shown refer to Allen-Bradley quick-disconnect cables. -
Analog Wiring Diagrams urrent onnections + -- able Style (+) V D urrent Sensor (+) V D Max Grey RMAX = Supply Voltage - V ma Voltage onnections + -- able Style (+) V D Grey Analog Voltage Sensor R = k Ohm Minimum NPN Set Point onnections Load = ma max + -- able Style (+) V D Load (+) V D Load (+) V D Note: Details of connection of Allen-Bradley Photoelectric sensors to Allen-Bradley Programmable ontrollers can be found in publication -.. Approximate Dimensions (Applies to all versions) [mm (in.)] To Remove Photohead. (.).7 Min. (.).7. (.) 7. (.). (.9). (.9).9 (.7). (.). (.) 9. (.) Quick- Disconnect Screw LED Indicator / - NPSM 7.7 (.9) Top View 9. (.77) Bottom View. (.). (.). (.). (.9).. (.9) (.) - UNF. Holes (.) Note: Hardware included with sensor: two () nickel plated -- mounting screws. able Style. (.9).9 (.7). (.).7 (.) Bottom View 7. (.7). (.9) - UN Holes / - NPSM 7. (.). (.) 9. (.7). (.). (.9) / - NPSM m(ft) able -
Approximate Dimensions (Applies to all versions) [mm (in.)] (continued) Quick-Disconnect Style To Remove Photohead. (.).7 Min. (.).7 (.) 7. (.) PHOTOSWITH R Photoelectric Sensors. (.9) (.9) 7/ x UN Keyway. (.9) Line Typical Response urve Retroreflective Standard Diffuse 7 mm ( in.) White Paper Polarized Retroreflective 7 mm (.in) 7 mm ( in.).mm (.in). () (.). () ().mm (.in). () (.). () ().mm7.mm (.in) (.in).. () (). () () () Line Typical Response urve Retroreflective Polarized Retroreflective. (.). (.) (.) (.). m.m m m m ( ft) ( ft) ( ft) ( ft) ( ft) 7 (). (.) (.) 7 ().. m m (.) (.) ( ft) ( ft).m.m (ft) ( ft) Standard Diffuse Short Range Long Range.... m m m (.) (.) (.) ( ft) ( ft) ( ft) Background Suppression X X X X.... (.) (.) (.). (.) (.) -7
Green Line Typical Response urve Retroreflective. (.). (.) (.) (.) 9. () m ( ft) 7 () m ( ft) Polarized Retroreflective. (.) (.) 7 ().. m m (.) (.) ( ft) ( ft).m.m (ft) ( ft) Standard Diffuse MRP- P MRP-... 9 m. m (.) (.) (.) () ( ft) ( ft) Transmitted Beam 7 (). () (). () 7 () Fixed Focus Lens Wide Angle Lens Background Suppression X X X.7 (.). (.) 7 (.).7 (.). (.) (.) (.) X. (.)... (.) (.). (.) (.) Example: Operating distance set at. mm ( in.). -
Analog Typical Response urve PHOTOSWITH R Photoelectric Sensors Retroreflective Standard Diffuse Voltage urrent Voltage urrent D Voltage 9 7..9 () (). () in. x in. m 79..7 (7) (9). ().9 (). () D urrent (ma. ().9 (). () in. x in. m 79 Infrared Glass FO/Fixed Focus/Wide Angle Diffuse Voltage urrent D Voltage 9 7 (.9) (7.7) (.) (.7) Operating Distance [mm (in.)] D urrent (ma. (7) (.9) (7.7).7 (9). ().9 () (.) (.7) Operating Distance [mm (in.)]. () D Voltage 9 7...9.. () () () () () D urrent (ma) mm (in). ().9 (). (). () Product Selection Guidelines. Select photohead (see pages -- to --).. Select power base (see page --).. Select output module for green line models only (see page --).. Select plug-in control function optional module on page -- (green models only). -9
Green Line Green Line Product Selection [mm (in.)] (continued). Select Photohead (continued). Sensing Mode Sensing Distance [mm (in.)] Energized Sensor Response Time at. No. Object to Be Sensed Green Line Transmitted Beam Receiver Field of View: _ Emitter LED: Infrared nm. mm 7 m ( in ft) Light/Dark Selectable ms MRR- Order one receiver and one light source Object to Be Sensed Green Line Transmitted Beam Light Source Field of View: _ Emitter LED: Infrared nm. mm 7 m ( in ft) N/A MRL- Order one receiver and one light source Object to Be Sensed Green Line Large Aperture Fiber Optic Field of View: Determined by fiber optics or lens type Emitter LED: Infrared nm Depends on Fiber Optic selected. Light/Dark Selectable. ms MRA -FO Green Line Fixed Focus Emitter LED: Infrared nm Object to be Sensed. mm 7 m (. in ft ) Light/Dark Selectable. ms MRA -FF Object to be Sensed. (.) () Light/Dark Selectable. ms MRA -WA Green Line Wide Angle Diffuse Emitter LED: Infrared nm Prewired for use with output --9 only. Refer to page - for cordsets and accessories. -
Product Selection [mm (in.)]. Select. Line Line Style Operating Voltage Supply urrent at. No. Terminal V A, / Hz V A LTB - V A, / Hz V A LTB - able V A, / Hz V A LB - Terminal DTB - able V D ma DB - at. No. Operating Voltage Supply urrent Mini QD Style Green Line V A, / Hz V A MTB - MTB-QD- V A, / Hz V A MTB - V A/D, / Hz MTB - V A, / Hz V A MTB - V D MTB - MTB-QD- Analog Line All sensing modes Operating Voltage Supply urrent onnection Type at. No. 7 ma maximum Screw Terminal DTB - V D 7 ma maximum m V able DB -. Select module (green line models only) (required).. Select plug-in control function optional module (green line models only). ordsets and Accessories Description at./page No. Description at. No. Description at. No. Terminal hambers - Right Angle Bracket -7 7 mm ( in.) Diameter 9-9 Screw Terminal MTB - onduit Adaptor / inch NPT - mm (. in.) Diameter -pin D Mini QD MTB - -QD - Armored able Adaptor -77 Heavy Duty Protective Guard - Flexi-mount Mounting Assembly - Limit Switch Type Mounting Assembly 9-7 - Heavy Duty Mounting Assembly -7 Prewired for use with output --9 only. -