Page 1/7 Illustrations Principle diagram Product specification 10 GBit installation cable, duplex installation cable Cat.7A AWG 22 S/FTP with wires shielded in pairs 2x4 pairs (PiMF) pair shield: plastic foil with aluminum coating overall shield: tinned copper braid outer diameter 7.6 / 16.0 mm color of the cable jacket: blue coupling attenuation not less than 85 db applicable standards: EN 50173-1:2011-09; ISO/IEC 11801 Ed.2.2:2011-06; EN 50288-9-1 and IEC 61156-5 cable jacket: LSHF-FR (LSOH-FR) flame-retardant to IEC 60332-1/-2; IEC 60332-3-24; IEC 60754-1/-2 and IEC 64-1/-2 fire behaviour: Class Dca s2 d2 acc. EN 50399 Shipping Units: sold by meter on drum 1640 ft (500 m) on drum *The indication of fire protection classification is currently for your information only and becomes binding only after the assignment of the DoP number.
Page 2/7 General Data Design Installation cables Shielding shielded Transmission technology Copper Cable Type S/FTP Number of twisting elements 2x4 Twisting element Pair Color coding fiber/ wire(s) Color white/orange, orange, white/green, green, white/brown, brown, white/blue, blue blue Cable length (m) 500.00 m Cable length (ft) 1640.42 ft Weight 124.00 kg/km Transmission characteristics Category (ISO) 7A Transmission rate up to 10 GBit IEEE 802.3an Transmission values (nominal) see table Connections/interfaces Termination data, solid wire (min. - max.) Conductor cross section, solid wire AWG 22/1 Conductor diameter, solid wire (bare copper) 0.62 mm Conductor diameter, solid wire (bare copper) 0.024 in. Core diameter (min. - max.) Core diameter (conductor with insulation) Core diameter (conductor with insulation) Cable sheath diameter (min. - max.) Cable sheath diameter Cable sheath diameter Copper index 1.5 mm 0.059 in. 7.8 / 16.4 mm 0.276 in. 61.0 kg/km
Page 3/7 Electrical characteristics Loop resistance max. 116 Ohm/km Transfer impedance 1 MHz max. 5 mohm/m Transfer impedance 10 MHz max. 5 mohm/m Transfer impedance 30 MHz max. 8 mohm/m Characteristic impedance 1- MHz +/-5 Ohm Coupling attenuation min. 85 db Capacitance at 800 Hz Nom 43 nf/km Nominal velocity of propagation ca.76 % Delay skew max. 15 ns/ m Dielectric strength conductor-conductor (primarily) 0 V DC Dielectric strength conductor-conductor (secondary) 0 V DC Dielectric strength conductor-shield 0 V DC Segregation classification D Mechanical characteristics Tensile force 240 N Fire load 0.36 kwh/m Fire load 1300 MJ/km Bending radius without load min. 35 mm Bending radius with load min. 70 mm Materials and material properties Material - Conductor Cu (copper) Material - Conductor Insulation Foam-Skin Polyethylen Material - Cable jacket LSHF-FR (LSOH-FR) Material - Pair shield plastic film Material - Pair shield finish Al (Aluminium) Material - Main shield Cu (copper) braid Material - Main shield finish Sn (tin) Flame retardancy yes
Page 4/7 Environmental conditions Temperature (min. - max.) Temperature - Storage C -20-60 C Temperature - Storage F -4-140 F Temperature - Operating C -20-60 C Temperature - Operating F -4-140 F Temperature - Installation C 0-50 C Temperature - Installation F 32-122 F Approvals RoHS compliant The product meets the following standards Generic cabling systems General requirements ISO/IEC 11801 Ed.2.2: 2011-06 DIN EN 50173-1: 2011-09 Multi-element metallic cables used in analogue and digital communication and control Common test methods for cables under fire conditions Fire behaviour - class DIN EN 50288-9-1 Prüfung der vertikalen Flammenausbreitung an einer Ader, einer isolierten Leitung oder einem Kabel Prüfung der vertikalen Flammenausbreitung an einer kleinen Ader, einer kleinen isolierten Leitung Prüfung der vertikalen Flammenausbreitung von vertikal angeordneten Bündeln von Kabeln & isolierten Leitungen Measurement of smoke density of cables burning IEC 60332-1 Determination of the halogen acid gas content IEC 60754-1 Determination of acidity (by measuring the ph value) and conductivity IEC 60754-2 Klasse Dca s2 d2 nach EN 50399* IEC 60332-2 IEC 60332-3-24 IEC 64
Page 5/7 Classifications ETIM 5.0 EC000830 ETIM 6.0 EC000830 Packing details Type of packaging meter / drum
Page 6/7 Accessories Designation 140302-01-E Jokari dismantle tool
Page 7/7 Transmission values (nominal) Powered by TCPDF (www.tcpdf.org) as per Cat. 7A (at 20 C) FREQ MHz Attenuation (db/m) NEXT db min. PS-NEXT (db) ACR (db/ m) PS-ACR (db/ m) ELFEXT (db/ m) PS-ELFEXT (db/ m) Return loss (db) 1.0 4.0 10.0.0 250.0 500.0 600.0 862.0 0.0 1200.0 1.7 3.4 5.3 16.9 27 40 42 53 56 62 98 96 92 90 85 95 93 89 87 82 101 98 86 76 58 54 39 34 23 98 97 95 83 73 55 51 36 31 20 109 107 105 93 83 70 65 57 54 46 106 104 102 90 80 67 62 54 51 43 26 30 33 33 28 26 25 24 23 21