IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: August 2016 J-M MANUFACTURING CO., INC. 5200 W Century Blvd Los Angeles, CA 90045 Identification: Pipe: Manufacturer's name or trademark, nominal pipe size, PVC cell classification, "Type PSM SDR 35 PVC Sewer Pipe", ASTM D3034 and UPC certification mark. Fittings: Manufacturer's name or trademark, nominal size, "PVC", "PSM", "ASTM D3034", model number and UPC certification mark. Characteristics: Pipe: A white or green polyvinyl chloride (PVC) gravity sewer pipe with a belled end and an elastomeric gasket. To be used with IAPMO listed compatible PVC fittings with elastomeric gaskets. Fittings: or green polyvinyl chloride (PVC) sewer fittings with belled ends and elastomeric gaskets. All fitting assemblies to be solvent cemented in the factory or by IAPMO registered fabricators. To be used with IAPMO listed compatible pipe. These products are listed as sewer piping only, and are not intended for use as drainage, waste and vent or industrial waste and sewer piping. This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
Page 2 J-M MANUFACTURING CO., INC. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC 17025. Products are in compliance with the following code(s): Uniform Plumbing Code (UPC ) Products are in compliance with the following standard(s): ASTM D3034-2015e1
Page 3 MODELS: PIPE: 4", 6", 8", 10", 12" & 15" (Elastomeric Gasket) PIPE: 4" (Solvent Cement Belled End) PIPE: 6" (Solvent Cement Belled End) FITTINGS: 4", 6", 8", 10", 12" & 15" WYES (G x G x G) () () 0980623 0729962 4" x 4" 0949529 0730127 6" x 4" 0980631 0730143 6" x 6" 0949503 0730671 8" x 4" 0949495 0730697 8" x 6" 0104356 0730713 8" x 8" 0954024 10" x 6" 0954016 10" x 10" 0954008 12" x 4" 0953992 12" x 6" 0953984 12" x 12" 0138065 15" x 4" 0138073 15" x 6" 0138016 15" x 15" STREET WYES (G x SPG x G) 0902056 0730135 6" x 4" 0902064 0730150 6" x 6" 0902072 0730689 8" x 4" 0902080 0730705 8" x 6" DOUBLE WYES (G x G x G x G) 0104893 0730168 6" x 4" 0118224 0730176 6" x 6" 45 ELBOWS
Page 4 0949669 0730002 4" 0949651 0730242 6" 0005660 0730762 8" 0954321 10" 0954313 12" 0138024 15" STREET 45 ELBOWS (G x SPG) 0104182 0730010 4" 0005546 0730259 6" 0949644 0730770 8" 22-1/2 ELBOWS 0949784 0729988 4" 0954339 0730226 6" 0902114 0730754 8" 22-1/2 ELBOWS (G x SPG) 0005553 0729996 4" 0005561 0730234 6" 0730861 8" PLUGS SPG 0949693 0730457 4" 0949685 0730465 6" 0949677 0730804 8" 0954354 10" 0954347 12" 0138131 15"
Page 5 PLUGS (Spigot) 0078998 4" 0079012 6" CAPS (G) 0954370 0729939 4" 0954362 0730093 6" 090122 0730622 8" REPAIR COUPLINGS (NO STOP) 0005496 0729913 4" 0005512 0730077 6" 0949701 0730614 8" 0954248 10" 0954230 12" 0109041 15" COUPLINGS (WITH STOP) 0118612 0729921 4" 0005488 0730085 6" DUPLEX ADAPTERS WITH PVC RING (SPG x G) 0107979 0730051 4" PVC to A/C ADAPTERS WITH PVC RING
Page 6 0954420 0730069 4" 0954412 0730291 6" 0954404 8" 0954396 10" 0954388 12" INCREASERS WITH PVC RING (SPG x G) 0005595 0729947 4" x 6" 0118232 0730101 6" x 8" FITTINGS CLEANOUT ADAPTER WITH MPT PLUG (Solvent Weld Hub x FPT) 0902155/0902171 0730473/0730499 4" 0902163/0902189 0730481/0730507 6"