STAINLESS STEEL PRODUCTS AND SERVICES

STAINLESS STEEL PRODUCTS AND SERVICES

STAINLESS STEEL EXPERTS OVER 25 YEARS EXPERIENCE IN THE SECTOR WHERE TECHNOLOGY AND EXPERIENCE MEET 2X12 up to m Flatenning 2X6 up to m Nautic polish 10K Stockist tons Located just a few Km from Barcelona, Grupo Lapuente has more than 25 years of experience in the storage, production and commercialization of stainless steel products for the international market. From Barcelona to the world. We have 4 service centers, a total of 22,000 m 2, where we have a wide and varied stock in finishes, thicknesses and qualities. More than 10,000 tons of stainless steel, mainly in coils, sheets, strips and also stock of angles, round tubes, flat bars and round bars. The custom cut for both strip and sheet is part of our DNA. We are specialists in the manufacturing of round tubes with TIG welding, accessories and Pressfitting. Our service centers allow us to be leaders in superficial finishes on stainless steel sheets and coils, for which we have last generation machinery in polishing, satin, grinding and damask. On top of all this, we have extensive experience in the production of U-Channels, angles and flat bars. In Grupo Lapuente we strive to provide the best service forcing us to give a quick response in delivery times and seeking total satisfaction of our customers through a high quality requirement. To do thit, we invest constantly in modern machinery and highly qualified personnel in our commitment to innovation. The resources allocated in this aspect have been growing year after year, in order to maintain and improve our added value, our philosophy: commitment with our customers. Thanks to this, today we are a reference service center and leaders in the spanish national and international market. From Grupo Lapuente we continue betting on the expansion to the international market in order to forward our products and services to any country in the world with the total confidence of our customers. 2 3

KWOWLEDGE AND EFFORT OUR TEAM CONSTANTLY STRIVES TO ADOPT NEW TECHNOLOGIES AND IMPROVE CUSTOMER SERVICE FROM BARCELONA TO THE WORLD EXPERTS IN STAINLESS STEEL PRODUCTS AND SERVICES Is a Service Center of 8500 m 2, created in 1991 by Pedro Lapuente. It has levelling machines, slitting lines, shears as well as machinery for profiling and beveling and a large stock of stainless steel sheets and coils. Strips Profile It is the Finishing Center of the group specialized in polishing, grinding and satin among other treatments on stainless steel sheets and coils and non-ferrous metals. It was created in 2012 as the second Service Center of the Group, with the aim of increasing the production capacity of Grupo Lapuente. The center has machinery for the cut-to-length and transversal cutting of sheet in stainless steel as well as for longitudinal cutting of coils and strips in stainless steel. Strips It was created in 2013 in Murcia as a distributor of the products and services of Grupo Lapuente in Murcia and its area of influence. Strips Profile Pressfitting Tube Manufacturer of stainless steel round tube and Pressfitting with more than 25 years of experience in the market, joined Grupo Lapuente in 2012. Pressfitting Tube Grupo Lapuente has the technology and advice of Novacel Ibérica, a leader in weather surface protection in industrial sectors including construction, electrical appliances, automotive and electronics. The company s quality management system is endorsed with ISO 9001:2000 certification. Novacel Ibérica s continuous improvement procedures enable the company to provide its customers the opportunity to add value to their products. 4 5

PRODUCTION PROCESSES ADAPTED TO NEW TECHNOLOGIES The coils arrive to Inoxidables Lapuente. 1 2 The coils are unloaded and checked one by one, analyzing the mill test certificate and checking that the material is correct. If necessary, the composition and properties of the material are tested in the laboratory. from to Flow 1 3 4 5 6 7 8 from The coil is placed on the cut to length line. The result are sheets with the same width as the coil and the required length. s are placed on pallets. We transport the sheets with our truck to Good Polish. We make the required surface treatment (grinding, satin, duplo, polish and damask). Once the finishing is done, sheets are coated with PVC so they are protected for the next handling (laser cutting, folding, shaping etc..). to Tube Pressfitting Profile Platen 5 6 7 Flow 2 Strips are sent to ISOTUBI. Isotubi produces round tubes with TIG welding in different diameters and standard or custom lengths. We produce the pressfitting from our round tubes. The Group s production processes and quality system, certified by TÜV in accordance with the ISO 9001:2008 international standard, attest to the quality and reliability of its products. 3 The coil is placed on the slitting line. 4 The result are several strips cut according to the required size with the required weight. 5 Or we produce U-Channels, angles and flat bars. 6 U-channels and angles bars in standard or custom length. Stainless steel bars in standard or custom length. 7 6 7

PRODUCTS AVANTGARDE TECHNOLOGY AND OVER 25 YEARS OF EXPERIENCE AT YOUR SERVICE CUSTOMIZATION CAPACITY COMMITMENT TO SE RVICE AND QUALITY COILS AND SHEETS Width (mm) 1,000, 1,250, 1,500, 2,000 from 0.4 to 10 Type of stainless steel 304/304L, 316/316L, 310S 430, 409/409L, 441, 444, 439, 420 Mill: 2B, 1D, BA Mechanical: Satin and Grinded for coils and Polished, Satin, Grinded, Damask and Duplo for sheets Protection: Without or with special PVC coating, stamping, polyethylene, special laser, fiber laser ENGRAVED COIL AND TEAR PLATES Width (mm) 1,000, 1,250, 1,500 from 3 to 5 Type of stainless steel 304/304L SIZES Standard and customized width and length of sheets and coils according to customer requirements STRIPS Width (mm) from 7 to 1,550 from 0,3 to 6 Mill: 2B, 1D, BA Mechanical: satin and grinded. Protection: without or with special PVC coating, stamping, polyethylene, special laser, fiber laser SIZES Customized width according to customer requirements FLAT BARS Width (mm) from 10 to 100 from 2 to 6 Length (mm) from 1,000 to 12,000 Mill: 2B, 1D Mechanical: Grinded, Satin and Polished U-CHANNELS AND ANGLES U-channel sizes (mm) from 10x10x10 to 30x40x30 Angles sizes (mm) from 10x10 to 50x50 1 and 1.5 Type of stainless stee 304/304L, 316/316L Length (mm) 6,000mm standard or customized according to customer requirements BAP or SATP ROUND TUBES In Austenitic stainless steel Aisi 304/304L, TIG welding according to the European norm EN10217/7 or Alimentary norm DIN 11850 Diameter (mm) from 8 to 114.3 from 0.5 to 3.5 Brushed, Satin*, Mirror polished*, Mechanical polished* and Grinded 180, 240, 320, 400* *finished with tube in individual plastic sleeves SIZES Standard and customized width and length of sheets and coils according to customer requirements ANGLE BARS Available stock of austenitic stainless steel angle bars in Aisi 304L and 316L hot rolled and pickled with6 meter length Sizes (mm) from 20x20x3 to 100x100x10 ROUND BARS Available stock of austenitic stainless steel round bars in Aisi 304L and 316L hot rolled and cold drawn Diameter (mm) from 3 to 100 CIRCLES According to international tolerance and norms Type of stainless steel 304/304L,316/316L and 430 Diameter (mm) de 0.5 hasta 1.5 2B, BA CUS TOM 8 9

MACHINES CUSTOM CUTTING AND FLATTENING CAPACITY 2020 1500 up to 2050 1560 CUT-TO- LENGTH LINE 2050 2020 from 1.5 to 10 from 1 to 6 Width (mm) 2,050 2,020 Length (mm) 12,300 15,000 CUT-TO- LENGTH LINE 1560 1500 from 0.4 to 4 from 0.4 to 1 Width (mm) 1,560 1,500 Length (mm) 12,000 6,000 SLITTING LINE 1500 from 0.4 to 4 Width (mm) from 30 to 1,550 500 670 450 1000 SLITTING LINE 1000 670 from 0.4 to 2 from 1.5 to 6 SLITTING LINE 500 450 from 0.3 to 2 from 0.4 to 3 SHEARS from 0.4 to 10 BEVELLING LINE from 2 to 6 Width (mm) from 20 to 1,000 from 15 to 670 Width (mm) from 10 to 500 from 8 to 450 Width (mm) maximum of 4,000 Width (mm) from 10 to 100 Length (mm) from 1,000 to 12,000 10 11

SERVICES PROFILE FINISHING AND MANUFACTURING CENTRE GRINDING LINE from 0.4 to 6 Width (mm) from 300 to 2,000 Length (mm) from 900 to 6,000 SATIN FINICHING LINE from 0.4 to 5 Width (mm) from 300 to 1,500 Length (mm) from 900 to 6,000 COIL PROCESSING LINE (GRINDED AND SATIN) from 0.4 to 2 Width (mm) from 300 to 1,500 Weight (Kg) from 500 to 15,000 hasta2x6m DAMASK FINISHING LINE from 0.7 to 3 POLISHING MACHINE from 0.4 to 6 PROFILING LINE (U AND L PROFILES) Thickness U (mm) from 1 to 1.5 FILM COATING MACHINE (SHEET AND COIL) Dimensions (mm) from 200x500 to 2,000x8,000 Width (mm) from 100 to 1,500 Length (mm) from 900 to 4,000 Width (mm) from 500 to 2.000 Length (mm) from 500 to 6.000 Dimensions U (mm) Thickness L (mm) from 1 to 1.5 Dimensions L (mm) from 10x10x10 to 30x40x30 from 10x10 to 50x50 12 13

DISTRIBUCIÓN NACIONAL E INTERNACIONAL. APUESTA POR LA EXPORTACIÓN. DISTRIBUTION SPANISH AND INTERNATIONAL DISTRIBUTION. COMMITMENT TO EXPORT FROM BARCELONA TO THE WORLD CMR TRANS PORT BILL OF LADING 9001 14 CER TIFICATE OF ORIGIN The products and services of Grupo Lapuente have extensive approvals and comply with international regulations, tolerance and documentation. Grupo Lapuente is a leading service center in the national and international market thanks to our commitment to internationalization and commitment to our customers wherever they are. 15

C/ Motors, 15-21 Pol. Ind. Comte de Sert 08755 Castellbisbal Barcelona (España) Tel. +0034 93 772 23 34 export@grupolapuente.com