Navigator I J40-X15SC OEM Laser System 1064nm, 532nm, 355nm, and 266nm The Navigator I X15SC laser system is an advanced diode pumped solid state laser system. Its Q-switched output characteristics have been optimized for applications requiring high pulse energy, high pulse stability, and near diffraction limited mode profile. The laser head is pumped by a single 40 W ProLite diode module. TM This unique pump source is field replaceable, requiring no optical realignment of the laser head. The laser head is manufactured in a clean room environment and sealed to prevent optical contamination. The standard system includes an electro-mechanical shutter and power monitor. Second (532nm), third (355nm), and fourth (266nm) harmonic modules are available. Applications include, but not limited to, laser marking, scribing trimming, solar cell processing, and stereolithography. Ordering Information J40-X15SC-106Q J40-X15SC-532Q J40-X15SC-355QM J40-X15SC-355QA J40-X15SC-266Q J-series system, 1064nm J-series system, 532nm J-series system, 355nm, manual translation J-series system, 355nm, automatic translation J-series system, 266nm, automatic translation
X15SC-532Q Line Drawing X15SC-355Q Manual Line Drawing
X15SC-355Q and X15SC-266Q Automatic Line Drawing J40 Power Supply Line Drawing
Navigator I J40-X15SC OEM Laser System Specifications Performance Characteristics 1 General Characteristics 1,2 Wavelength 1064 nm 532 nm 355 nm 266 nm Average power 7 W @ 20 khz 4.0 W @ 20 khz 1.5 W @ 20 khz > 0.6 W @ 20 khz Repetition rate range, khz 15-70 Pulsewidth, nominal 20 nsec 15 nsec 15 nsec < 15 nsec @ 20 khz Beam Characteristics 2,3 Mode M 2 < 1.15 < 1.2 < 1.3 < 1.4 Polarization > 100:1, horizontal Beam diameter (waist) 0.625 mm, nominal 0.9 mm, nominal 1 mm, nominal 1 mm, nominal Waist Location 9 cm nominal from output face 65 cm nominal from output face 1.5 m nominal from output face -50 cm nominal from output face Beam divergence, full angle 2.25 mrad, nominal 1.0 mrad, nominal 0.7 mrad, nominal 0.5 mrad, nominal Beam ellipticity 10% 10% 20% 20% Boresight N/A Stability 2,3 Beam pointing Pulse to pulse < 1.5% rms < 3.5% rms < 5.0% rms < 8.0% rms Environmental & Physical Characteristics Operating Conditions Warm-up time Temperature range Altitude Humidity Nonoperating Conditions Temperature range Altitude Humidity Weight (laser head) 4 Weight (532 module) Weight (355 module) Environmental Characteristics 4 Physical Characteristics < 20 minutes for 1064 and 532 nm < 30 minutes for 355 and 266nm 18 C - 35 C 0-3,000 meters 8-90%, non-condensing 0 C - 50 C 0-12,000 meters 8-95%, non-condensing 7.7 kg (16.9 lbs) 1.9 kg (4.0 lbs) 6.0 kg (13 lbs) Notes: 1. Due to our continuous product improvement program, specifications are subject to change without notice. 2. All specifications at 20kHz PRF unless otherwise specified. 3. Stability measurements made over ± 2 C dynamic range within speci fied operating range. 4. This data applies only to the laser head. Refer to power supply data sheets for more information. Warranty Spectra-Physics Navigator I X15SC series laser products are protected by a 12 month warranty. All components and assemblies are unconditionally warranted to be free of defects in workmanship and materials for the warranty period, beginning from the date of shipment. This warranty is in lieu of all other warranties, expressed or implied, and does not cover incidental or consequential loss. This warranty does not apply to devices damaged due to operating conditions outside of the specified parameters. Modified warranties for OEM customers are available. Weight (266 module) 5.8 kg (12.8 lbs)
Notice The Navigator I laser systems comply with Title 21 of the United States Code of Federal Regulations, Chapter 1, Subchapter J, Parts 1040.10 and 1040.11, as applicable. ISO 9001 Certified Corporate Headquarters 1335 Terra Bella Avenue Mountain View, CA 94043 Tel: 1-800-SPL-LASER (775-5273) Tel: (650) 961-2550 Fax: (650) 964-3584 E-mail: sales@splasers.com www.spectra-physics.com 12/02 Part Number M129-0004 Rev C