ISO INTERNATIONAL STANDARD. Cinematography Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film

Similar documents
ISO INTERNATIONAL STANDARD. Optics and photonics Minimum requirements for stereomicroscopes Part 2: High performance microscopes

ISO INTERNATIONAL STANDARD. Photography Electronic scanners for photographic images Dynamic range measurements

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Textile machinery Weaving machine temples Part 2: Full-width temples

ISO INTERNATIONAL STANDARD

ISO 897 INTERNATIONAL STANDARD. Photography Roll films, 126, 110 and 135-size films Identification of the image-bearing side

ISO INTERNATIONAL STANDARD. Hexalobular internal driving feature for bolts and screws. Empreinte à six lobes internes pour vis

ISO 3040 INTERNATIONAL STANDARD. Geometrical product specifications (GPS) Dimensioning and tolerancing Cones

ISO 216 INTERNATIONAL STANDARD. Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Technical drawings General principles of presentation Part 44: Sections on mechanical engineering drawings

ISO INTERNATIONAL STANDARD. Motorcycle tyres and rims (metric series) Part 3: Range of approved rim contours

ISO 518 INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Collets with 8 setting angle for tool shanks Collets, nuts and fitting dimensions

ISO INTERNATIONAL STANDARD. Rolling bearings Sleeve type linear ball bearings Boundary dimensions and tolerances

ISO INTERNATIONAL STANDARD. Countersinks for countersunk head screws with head configuration in accordance with ISO 7721

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Optics and optical instruments Vocabulary for microscopy Part 2: Advanced techniques in light microscopy

ISO INTERNATIONAL STANDARD. Optics and optical instruments Specifications for telescopic sights Part 1: General-purpose instruments

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Timber structures Dowel-type fasteners Part 1: Determination of yield moment

ISO INTERNATIONAL STANDARD. Rubber Tolerances for products Part 2: Geometrical tolerances

ISO INTERNATIONAL STANDARD. Horology Water-resistant watches. Horlogerie Montres étanches. First edition

ISO INTERNATIONAL STANDARD. Tool holders with cylindrical shank Part 1: Cylindrical shank, location bore Technical delivery conditions

ISO INTERNATIONAL STANDARD. Ophthalmic instruments Fundus cameras. Instruments ophtalmiques Appareils photographiques du fond de l'œil

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Technical product documentation Lettering Part 6: Cyrillic alphabet

ISO INTERNATIONAL STANDARD. Optics and photonics Optical coatings Part 3: Environmental durability

ISO INTERNATIONAL STANDARD. Paints and varnishes Drying tests Part 1: Determination of through-dry state and through-dry time

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Technical product documentation Lettering Part 3: Greek alphabet

ISO INTERNATIONAL STANDARD. Metallic materials Knoop hardness test Part 3: Calibration of reference blocks

ISO INTERNATIONAL STANDARD. Photography Electronic scanners for photographic images Dynamic range measurements

ISO 8752 INTERNATIONAL STANDARD. Spring-type straight pins Slotted, heavy duty

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Graphic technology Plates for offset printing Dimensions

ISO INTERNATIONAL STANDARD. Paper and board Determination of bending resistance Part 1: Constant rate of deflection

ISO 216 INTERNATIONAL STANDARD. Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction

ISO 7004 INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Mechanical vibration and shock Coupling forces at the man-machine interface for hand-transmitted vibration

ISO INTERNATIONAL STANDARD. Ceramic tiles Part 16: Determination of small colour differences

ISO 3334 INTERNATIONAL STANDARD. Micrographics ISO resolution test chart No. 2 Description and use

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Natural gas Correlation between water content and water dew point

ISO INTERNATIONAL STANDARD. Horology Water-resistant watches. Horlogerie Montres étanches. First edition

ISO 2836 INTERNATIONAL STANDARD. Graphic technology Prints and printing inks Assessment of resistance to various agents

ISO INTERNATIONAL STANDARD. Textiles Determination of resistance to water penetration Impact penetration test

ISO INTERNATIONAL STANDARD. Paints and varnishes Determination of volatile organic compound (VOC) content Part 1: Difference method

ISO INTERNATIONAL STANDARD. Textile floor coverings Laboratory cleaning procedure using spray extraction

ISO INTERNATIONAL STANDARD. Textiles Determination of spirality after laundering Part 3: Woven and knitted garments

ISO INTERNATIONAL STANDARD. Hexalobular socket pan head screws. Vis à métaux à tête cylindrique bombée large à six lobes internes

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Laminate floor coverings Determination of geometrical characteristics

ISO 2490 INTERNATIONAL STANDARD. Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module Nominal dimensions

ISO 1519 INTERNATIONAL STANDARD. Paints and varnishes Bend test (cylindrical mandrel) Peintures et vernis Essai de pliage sur mandrin cylindrique

ISO INTERNATIONAL STANDARD. Internal combustion engines Piston rings Part 1: Rectangular rings made of cast iron

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Textile machinery and accessories Beams for winding Part 5: Sectional beams for warp knitting machines

ISO/TR TECHNICAL REPORT. Ergonomics Construction and application of tests for speech technology

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Photography Root mean square granularity of photographic films Method of measurement

ISO INTERNATIONAL STANDARD. Hexagon bolts with flange Small series Product grade A

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Ergonomic design for the safety of machinery Part 3: Anthropometric data

ISO 5-4 INTERNATIONAL STANDARD. Photography and graphic technology Density measurements Part 4: Geometric conditions for reflection density

ISO INTERNATIONAL STANDARD. Textiles Water resistance Rain tests: exposure to a horizontal water spray

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Rolling bearings Sleeve type linear ball bearings Boundary dimensions and tolerances

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Earth-moving machinery Lighting, signalling and marking lights, and reflexreflector

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Metallic tube connections for fluid power and general use Part 6: 60 cone connectors with or without O-ring

INTERNATIONAL STANDARD

ISO 9039 INTERNATIONAL STANDARD. Optics and photonics Quality evaluation of optical systems Determination of distortion

ISO INTERNATIONAL STANDARD. Dentistry Powered polymerization activators Part 2: Light-emitting diode (LED) lamps

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD

ISO/TR TECHNICAL REPORT. Textiles Methods of simulating colour change during actual wear by means of laboratory colour-fastness tests

ISO INTERNATIONAL STANDARD. Mechanical vibration and shock Signal processing Part 4: Shock-response spectrum analysis

ISO INTERNATIONAL STANDARD. Graphic technology Colour and transparency of printing ink sets for fourcolour

ISO INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Gel ink ball pens and refills Part 2: Documentary use (DOC)

ISO/TR 2801 Clothing for protection against heat and flame General recommendations for selection, care and use of protective clothing

ISO 841 INTERNATIONAL STANDARD. Industrial automation systems and integration Numerical control of machines Coordinate system and motion nomenclature

ISO INTERNATIONAL STANDARD. Hexagon socket head cap screws with metric fine pitch thread. Vis à tête cylindrique à six pans creux à pas fin

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Steel wire ropes Vocabulary, designation and classification

ISO 860 INTERNATIONAL STANDARD. Terminology work Harmonization of concepts and terms. Travaux terminologiques Harmonisation des concepts et des termes

ISO INTERNATIONAL STANDARD. Glass in building Silvered, flat-glass mirror. Verre dans la construction Miroir argenté en verre plat

ISO/TR TECHNICAL REPORT. Natural gas Hydrocarbon dew point and hydrocarbon content

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Ergonomics Manual handling Part 2: Pushing and pulling

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Natural gas Correlation between water content and water dew point

ISO INTERNATIONAL STANDARD. Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth

Transcription:

INTERNATIONAL STANDARD ISO 20859 First edition 2005-06-15 Cinematography Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film Cinématographie Réponse spectrale de lecteurs audio avec des pistes sonores analogiques de couleurs sur film de tirage 35 mm Reference number ISO 20859:2005(E) ISO 2005

ISO 20859:2005(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2005 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyright@iso.org Web www.iso.org Published in Switzerland ii ISO 2005 All rights reserved

ISO 20859:2005(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 20859 was prepared by Technical Committee ISO/TC 36, Cinematography. ISO 2005 All rights reserved iii

INTERNATIONAL STANDARD ISO 20859:2005(E) Cinematography Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film 1 Scope This International Standard specifies the spectral response of the photographic audio reproducer light source and receptor as a unit, including any optical filtering that can be interposed. The analog sound track formats suitable for reproduction using such a reproducer include the cyan dye-only track (without redevelopment of silver) and both conventional and high magenta soundtracks (with redevelopment of silver). 2 Spectral response 2.1 The peak or maximum response of the combined audio reproducer light source, filter and receptor shall + 20 be 660 nm 30 nm. 2.2 The integrated response of the unit to all wavelengths greater than 800 nm shall be less than 5 % of the total integrated response measured from 400 nm to 800 nm. ISO 2005 All rights reserved 1