MXDMulti_0-02-2-02-EH-0218 Medical utomation Datacom IPC Industry Measurement Telecom utomobile Boat Charger PV Railway PRT NUMBER STRUCTURE MD U Name Power (W) Input (VC) Quantity 1 () Vo1 D:Dual 3: 5V T:Triple : 7.5V 5: 9V : 12V 7: 15V 8: 18V 9: 2V 0: 28V MD: MUD: MED: MDD: Open type U chassis type Enclosed type Din rail type U:Universal 85 ~ 2VC B Protection 2 3 3 Type () polarity () Vo2 Vo3 (Triple only) 1: 2.5V M: Minus 1: 2.5V B: CLSS II 2: 3.3V : Positive 2: 3.3V No: CLSS I 3: 5V 3: 5V x: refer to : 7.5V Suffix xx 5: 9V : 12V 7: 15V 8: 18V 9: 2V y: refer to Suffix yy - xx yy Vo2 Code Vo3 Code Connector Option Blank: JST M: Molex T: Terminal Block Page 1
MXDMulti_0-02-2-02-EH-0218 MD Multi TECHNICL SPECIFICTION ll specifications are typical at 230VC input, full load and 25 unless otherwise noted 1 Model Number MDUD32B MUDUD32B MEDUD32B MDDUD32B MDUD3B MUDUD3B MEDUD3B MDDUD3B MDUD2B MUDUD2B MEDUD2B MDDUD2B MDUD73B MUDUD73B MEDUD73B MDDUD73B MDUD93B MUDUD93B MEDUD93B MDDUD93B MDUD03B MUDUD03B MEDUD03B MDDUD03B MDUT32M3B MUDUT32M3B MEDUT32M3B MDDUT32M3B MDUT32B MUDUT32B MEDUT32B MDDUT32B MDUT32MB MUDUT32MB MEDUT32MB MDDUT32MB MDUT3M3B MUDUT3M3B MEDUT3M3B MDDUT3M3B MDUT3MB MUDUT3MB MEDUT3MB MDDUT3MB MDUT23B MUDUT23B MEDUT23B MDDUT23B 2 3 Power Efficiency W 89.5 89 90 2.7 88.5 1.05 1.7 8 +28 0.72 1.3 85.5 5 8-5 89 5 8 89 5 8-12 89 3.3-5 88.5 3.3-12 88 3.3 88.5 (Normal) (MX) (Normal) (MX) 5 8 3.3 3.3 +15 1.7 +2 (MX) Page 2
MXDMulti_0-02-2-02-EH-0218 MD Multi 1 Model Number MDUT2MB MUDUT2MB MEDUT2MB MDDUT2MB MDUT73M7B MUDUT73M7B MEDUT73M7B MDDUT73M7B MDUT93B MUDUT93B MEDUT93B MDDUT93B MDUT93MB MUDUT93MB MEDUT93MB MDDUT93MB 2 (Normal) (MX) +15 3 (Normal) (MX) 3.3 1.7 2.7 +2 1.05 1.7 +2 1.05 1.7 INPUT SPECIFICTIONS Operating input voltage range Input frequency Input current No load input power Leakage current Start up time Rise time Hold up time Input inrush current Input protection Power Efficiency W (MX) -12 88-15 88 8-12 8 C input DC input C input 100VC 2VC 230VC 2VC 115VC and Full Load 230VC Internal fuse in line and neutral Min. Typ. 85 120 7 Unit 2 370 3 1.05 5 0.15 75 1000 VC Hz 20 25 0 T3.15/250VC Watts μ ms ms ms Page 3
MXDMulti_0-02-2-02-EH-0218 MD Multi OUTPUT SPECIFICTIONS power Initial set voltage accuracy Pout1+Pout2+Pout3 230VC and Full Load Line regulation Load regulation Low Line to High Line at Full Load No Load to Full Load Cross regulation adjustability Minimum load Ripple and noise Temperature coefficient Transient response Over voltage protection Over power protection Short circuit protection Min. Vout 2 Vout 3 No Load to Full Load 0.1W Load to Full Load symmetrical load 25/100 FL Vout 3 Vout 2 Vout 2 M DUD M DUT ; Vout 3 is full load Measured by 20MHz bandwidth + Vout 2 With a 10μF/25V 120 X7R MLCC With a 1μF/50V 120 X7R MLCC -1.0-2.0-0.2 - -0.7-1.5-0.7-1.5-10 Vout 2 Vout 3 Load step from 50 ~ 75 change at 2.5/μs of Vout(nom); Latch mode of nominal output power; Hiccup mode Pout 1 + Pout 2 GENERL SPECIFICTIONS Isolation voltage 1 minute (2MOPP insulation) Isolation resistance Switching frequency 500 230VC Operating ambient temperature Storage temperature range Operating altitude Shock Vibration Relative humidity 5V Others Typ. Non-condensing mvp-p Unit GΩ 70 115 750 510 khz UL:E30199 CB:UL(Demko) 150 (5.29oz) 198 (.98oz) 21 (7.2oz) 238 (8.oz) 1.71 x 10 hrs MIL-HDBK-217F, Full load Min. With derating VC MD MUD MED MDD +0.02 3 IEC/ EN/ NSI/MI ES 001-1 ENVIRONMENTL SPECIFICTIONS W 0.1 Weight MTBF Watts 00 2500 Vout 2 Vout 3 Safety approvals +1.0 +2.0 +0.2 + +0.7 +1.5 +0.7 +1.5 +10 / Vout 00 μs 125 1 15 Continuous, automatics recovery Min. Input to Input () to F.G. Unit 100 120 150 2 280 100 100 120 150-0.02 Peak deviation Recovery time Max. 0 5V 12V 15V 2V 28V ll 5V 12V 15V With a 10μF/25V 120 X7R MLCC With a 10μF/25V 120 X7R MLCC Typ. - - Typ. Unit +85 +85 5000 m IEC008-2-27 IEC008-2- 5 to 95 RH Page
MXDMulti_0-02-2-02-EH-0218 MD Multi EMC SPECIFICTIONS Level EMI EN55011, EN55032 and FCC Part 18 Conducted Radiated Harmonic currents flicker ESD Radiated immunity Fast transient Surge Conducted immunity Power frequency magnetic field Dip and interruptions External components may be required for class I application. EN1000-3-2 Full Load EN1000-3-3 EN1000--2 ir ± 15kV and Contact ± 8kV EN1000--3 20 V/m EN1000-- ± 2kV EN1000--5 DM ± 1kV EN1000-- 20 Vr.m.s EN1000--8 30 /m EN1000--11 Class B Class B Class Perf. Criteria Perf. Criteria Perf. Criteria Perf. Criteria Perf. Criteria Perf. Criteria CHRCTERISTIC CURVE M DUDxxB xx=03/93 M DUTxxxB xxx=32m3/32/32m/93/93m M DUDxxB xx=3/73 M DUTxxxB xxx=3m3/3m/73m7 Efficiency VS Load M DUT3MB M DUDxxB xx=32/2 M DUTxxxB xxx=23/2m Derating Curve vs. Input M D5 Efficiency VS Input M DUT3MB Page 5
MXDMulti_0-02-2-02-EH-0218 MD Multi MECHNICL DRWING MD Open type MDD Din rail type 1. ll dimensions in inch [mm] 2. Tolerance : x.xx±0.02 [x.x±] x.xxx±0.01 [x.xx±0.25] 3. M3 screw locked torque MX 5Kgf.cm/0.9N.m CONNECTORS CONNECTIONS CON1 Input Connector Pin 1 Pin 3 CON2 Connector Line Neutral Pin 1 Pin 2,3 Pin,5 Pin Vout3 Com Vout2 Vout1 *Either one of four screws holes of Open / Chassis type can be considered as PE connection for CLSS I application. Page
MXDMulti_0-02-2-02-EH-0218 MD Multi MECHNICL DRWING(CONTINUED) MED Enclosed type MUD U chassis type 1. ll dimensions in inch [mm] 2. Tolerance : x.xx±0.02 [x.x±] x.xxx±0.01 [x.xx±0.25] 3. M3 screw locked torque MX 5Kgf.cm/0.9N.m CONNECTORS CONNECTIONS CON1 Input Connector Pin 1 Pin 3 CON2 Connector Pin 1 Pin 2,3 Pin,5 Pin Line Neutral Vout3 Com Vout2 Vout1 *Either one of four screws holes of Open / Chassis type can be considered as PE connection for CLSS I application. CONNECTOR OPTIONS Blank: JST Type Mates with housing CON1: VHR-3N CON2: VHR-N Crimp terminals CON1: SVH-21T-P1.1 CON2: SVH-21T-P1.1 -M Molex Type Mates with housing CON1: 09-50-8031 CON2: 09-50-801 -T Terminal Block Screw locked torque MX 2Kgf.cm/0.2N.m Crimp terminals CON1: SD-278 CON2: SD-278 Wire dimension range 2 ~ 1WG Tel Fax Email Web dd +88--2359-08 +88--2359-1337 sale@pduke.com No. 3, 22nd Rd., Taichung Industrial Park, Taichung, Taiwan, R.O.C. Page 7
Headquarter Switzerland: Pewatron G Thurgauerstrasse CH-8050 Zurich Phone +1 877 35 00 info@pewatron.com Office Germany: Pewatron Deutschland GmbH Edisonstraße 1 D-8571 Unterschleißheim Phone +9 89 37 288 87-0 info.de@pewatron.com We are here for you. ddresses and Contacts. Sales Germany & ustria Postcode 00000 31999 Postcode 38000 39999 Postcode 80000 99999 ustria Postcode 32000 37999 Postcode 000 79999 Geometrical sensors Sensor elements Kurt Stritzelberger Gerhard Vetter Thorsten Ravagni Phone + 9 89 20 52 80 Mobile + 9 171 803 1 35 Phone + 9 7 39 75 75 Mobile + 9 13 72 7 30 Phone +9 0 79 53 27 kurt.stritzelberger@pewatron.com gerhard.vetter@pewatron.com thorsten.ravagni@pewatron.com Sales Switzerland & Liechtenstein Sales International Key ccounts Postcode 3000 9999 Postcode 1000 2999 Basil Frei Christian Mohrenstecher Peter Felder Phone + 1 877 35 18 Mobile + 1 7 279 37 2 Mobile +1 7 57 93 Phone + 1 877 35 05 Mobile + 1 79 9 83 basil.frei@pewatron.com christian.mohrenstecher@pewatron.com peter.felder@pewatron.com Pressure Sensors Gas sensors / Gas sensor modules Load cells Flow / Level / Medical products Philipp Kistler Phone + 1 877 35 03 philipp.kistler@pewatron.com Dr. Thomas Clausen Phone + 1 877 35 13 thomas.clausen@pewatron.com Dr. driano Pittarelli Phone +9 825 77 95 adriano.pittarelli@pewatron.com ccelerometers / Level Flow sensor elements Power supplies Linear position sensors ngle sensors Thorsten Ravagni Phone +9 0 79 53 27 thorsten.ravagni@pewatron.com Sebastiano Leggio Phone + 1 877 35 0 sebastiano.leggio@pewatron.com Eric Letsch Phone + 1 877 35 1 eric.letsch@pewatron.com Drive technology CH Postcode 5000 9999 / DE Drive technology CH Postcode 1000 999 / T / IT / FR sensors Power solutions Roman Homa Mobile + 1 7 00 8 roman.homa@pewatron.com Christian Mohrenstecher Mobile +1 7 57 93 christian.mohrenstecher@pewatron.com Osman Coban Phone +9 71 35 33 898 osman.coban@pewatron.com Sales Other Countries / Product Management Competitive sensor & power supply solutions worldwide