» Modular clamping elements for optical or optical/tactical measurement» For highprecision edge measurements in reflected and transmitted light» Toothed rails as workpiece stops or for fastening clamping modules» For optical/tactile CNC measuring machines, measuring projectors and measuring microscopes Want to combine SCHIENENFIX products with each other? See "Modular design" on page 4.
Product overview Product group Product name Page Base + structural elements Rails, pallets and accessories Base rails 6 Connecting rails 7 Rail connecting pieces 8 Clamping claws 8 Rail fastening joints 9 Tslot blocks 9 Tslot rails 60 Clamp 60 Basic pallets 6 SWA 39 quickaction clamp Base mount 6 Quickaction clamps 6 Quickaction clamp 90 angle element 63 90 angle element 63 Articulated clamping and quickchange mount Articulated clamping arms 64 Satellite mounts 64 Thread adapter 6 Rotary unit 6 Quickchange mount 66 Angular mounts 66 Rotary swivel mount 67 Clamping elements Spring clamp and horizontal clamp Spring clamp for horizontal clamping 68 Spring clamp for vertical clamping 69 Mounts for spring clamps 69 Spring clamps for vertical clamping 70 Spring clamp with mounting 70 Try square with spring clamp 7 Screw frame, small 7 Screw frame with spring clamp 7 Horizontal clamp for toothed rails 7 Product overview. Schienenfix
Product overview Product group Product name Page Vices Precision vice, mm 76 Precision vice, mm 76 Precision vice, 3 mm 77 Precision vice, 0 mm 78 Stop units, Vblocks and tailstocks Stop unit set 79 Acrylic glass Vblock 80 Acrylic glass rail element 80 Vblock with spring clamp 8 Vblock with magnetic insert 8 Vblock bracket 8 Vsupport 83 Tailstock, small 84 Chucks Precision mini chuck 86 Precision threejaw chuck, 0 mm 87 Precision threejaw chuck, 6 mm 88 Nadelfix. 89 Smallparts clamps Smallparts clamp with stepped profile 90 Smallparts clamp, smooth 90 Smallparts clamp with Vblock 9 Smallparts clamp with "screwtightened grip" 9 Stop unit for smallparts clamps 9 Forked clamp 9 Toggle clamps and magnetic retainers Magnetic retainer 93 Toggle clamps 93 Schienenfix. Product overview
Product group Product name Page Other fixturing systems Rotary tables Rotary tables 94 Accessories for rotary tables 9 Tailstock large Tailstock 98 Accessories for tailstock 99 Multispannfix Multispannfix 00 Accessories for Multispannfix 0 Oktofix Oktofix 0 Accessories for Oktofix 03 Sets Sets Schienenfix basic sets 04 Schienenfix expansion sets for turned parts 06 Schienenfix milled and sheet parts expansion sets 07 3point support set 08 Pallets with clamping elements 09 Universal clamping sets 0 Clamping component sets Product overview. Schienenfix 3
Modular design ÄÄ Fixturing devices can be assembled from basic, structural and clamping elements. The modular elements have a standard interface for quick and easy combination. The diagram below shows different combination possibilities, but is only a selection of the available modular elements and possible combinations. from p. 64 from p. 67 Base and structural elements from p. 66 from p. 66 Clamping elements from p. 7 from p. 86 from p. 90 from p. 93 from p. 93 4 Schienenfix. Modular design
SWA 39 TSlot from p. 6 from p. 6 from p. 6 from p. 63 from p. 69 from p. 8 from p. 76 from p. 87 from p. 89 from p. 68 from p. 83 from p. 84 from p. 8 Modular design. Schienenfix
Base and structural elements Base rails Rail with toothing on one side and a Tslot. As a stop unit or for attaching modular structural and clamping elements. With mm or 0 mm tooth spacing. Hardcoated aluminium. TSlot Order number Tooth spacing Length Width Height Fig. 34490 3400 340 3440 3460 344900 34000 3400 34400 34600 0 0 0 0 0 00 0 30 40 00 00 0 30 40 00 8 8 8 8 8 8 8 8 8 8 0 0 0 0 0 0 0 0 0 0 Example application Base rails (page 6) Connecting rails (page 7) Tconnector (page 8) Clamping claws (page 8) Mount for spring clamp (page 69) Spring clamp for horizontal clamping (page 68) 6 Schienenfix. Base and structural elements
Connecting rails Rail with toothing all round and Tslot. 60 and 00 mm toothed rails have teeth on 3 sides. As a stop unit or for attaching modular structural and clamping elements. The toothing on the end face enables the rail to be connected to other toothed rails, e.g. for construction of a frame using two existing base rails. With mm or 0 mm tooth spacing. Rails with different tooth spacing can be combined. Hardcoated aluminium. TSlot Order number Tooth spacing Length Width Height Fig. 34700 3470 34740 34600 3460 34640 34660 347000 34700 347400 346000 34600 346400 346600 0 0 0 0 0 0 0 60 00 0 00 0 30 400 60 00 0 00 0 30 400 8 8 8 8 8 8 8 8 8 8 8 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Example application Base and structural elements. Schienenfix 7
Base and structural elements Rail connecting pieces Connecting piece for toothed rails. Aligned and clamped in Tslot. Hardcoated aluminium/steel. Scope of delivery Includes Tslot blocks and fastening screws. TSlot Order number Shape Length Width Height Fig. 348000 34800 Tconnector Cross connector 8 8 40 73 3. 3. Clamping claws Clamping claw for anchoring toothed rails to the measuring bench. Adjusting screws make it possible to adjust the glass panes to the same height. Different lengths of clamping claw available to compensate for the gap between the measuring range and the mounting holes on the measuring bench. Scope of delivery Includes fastening screws. If fastening with a Tslot, Tslot block must be ordered separately. ÄÄ For Tslot blocks, see page 9. TSlot M... Order number Length Mount (measuring bench) Measuring range gap / hole centre 694 69 696 698 690 694 69 696 698 690 69 3 3 3 3 3 4 4 4 4 4 60 M4 M M6 M8 Tslot M4 M M6 M8 Tslot M... to customer specification, or Tslot 3 3 3 3 3 3 6 3 6 3 6 3 6 3 6 60 80 8 Schienenfix. Base and structural elements
e d A e B d I e l B d I k l B l l Rail fastening joints Freely adjustable double joint for anchoring toothed rails to the measuring bench. Adjustment range 00 mm. Fastening to measuring bench using tapped hole or Tslot. Aluminium / steel. Scope of delivery Double joint as standard with M 6 connection thread. Adapters, Tslot blocks, etc. required for alternative fastenings must be ordered separately. TSlot M... TSlot TSlot Order number 34800 348600 Mount (measuring bench) M6 Customer specification Tslot blocks Tslot blocks for clamping claws, fastening joints and satellite mounts. e B d A k k (I) (II) (III) (IV) e e k Order number d A d I e e B k l l B Model 6300 630 6400 6000 64600 64000 64800 64300 347700 6400 64700 600 64400 M M M M6 M6 M6 M6 M6 M4 M4 M M M 0 0.8 0..8 0 0 7. 0 7.9 7.9. 3.8.8 4.8.8 7 6. 7. 4.8 7 6 4. 0 6 0. 0 30 8 30 30 30 I I I I I I I II IV IV IV III IV Base and structural elements. Schienenfix 9
Base and structural elements Tslot rails Tslot rail with no toothing for freely variable connection of toothed rails. The Tslot rail is connected to the toothed rails by clamps (349800). Example application TSlot Order number Length Width Height 34980 34980 349830 349840 34980 00 0 300 30 400 8 8 8 8 8 0 0 0 0 0 Clamp Anchoring set for Tslot rails mounted on toothed rails. Example application TSlot Order number Scope of delivery 349800 One set of two clamps 60 Schienenfix. Base and structural elements
Basic pallets Pallets with Tslot and M 6 mounting thread for fastening different clamping modules. The pallets can be placed against a square for reproducible positioning and fixed with spring or horizontal clamps. Hardcoated aluminium. ÄÄ Versions with nonstandard dimensions available on request. TSlot M 6 Order number Outside dimensions Inspection glass Version Fig. 3480 348 30 x 00 x 0 9 x 00 x 0 00 x 7 60 x 7 normal short Example application Pallet system: Universal and mobile carrier plate Fixing the test parts outside of the measuring machine Toolfree and quick positioning of the clamping fixture No fixed clamping modules on the measuring bench Base and structural elements. Schienenfix 6
Base and structural elements Base mount SWA 39 quickaction clamp for the direct mounting of fixturing modules on the measuring bench. With elongated hole for screws up to max. M 6. Hardcoated aluminium. SWA 39 M... Order number Length Width Height 6370 0 8 Quickaction clamp SWA 39 quickchange mount for mounting on toothed rails. Hardcoated aluminium/steel. Scope of delivery With Tslot block. SWA 39 TSlot Order number Length Width Height 7330 80 63 6 Schienenfix. Base and structural elements
Quickaction clamp 90 angle element Quickaction clamp angle element for mounting clamping elements. The angle element is fitted to quickaction clamp or alternatively can be fastened with bolts up to a maximum of M 8. Hardcoated aluminium. Example application SWA 39 SWA 39 M... Order number Length Width Height 83300 60 90 48 90 angle element Angle element for mounting quickaction clamp SWA 39. The angle element is fitted directly onto the toothed rail. Hardcoated aluminium. ÄÄ Quickaction clamp, see page 6. Example application TSlot Order number Length Width Height 73330 40 0 Base and structural elements. Schienenfix 63
Base and structural elements Articulated clamping arms Articulated stands with progressive clamping effect featuring a threaded mount in the base and a quickchange mount on the arm. Mechanical articulated clamping arm. Clamping effect provided by central grip. Retention force in case of rightangle mounting 00 N (MU type) or 80 N (SU type). R Example application M... SWA 8 M... Order number Model Connection at bottom Connection at top Operating range (R) 96800 96700 96900 97000 SU SU MU MU M 8 M 8 M 0 M 0 SWA 8 SWA 8 60 60 80 80 Satellite mounts Mount for articulated clamping arms on benches having compatible slots. Stainless steel. Scope of delivery Without Tslot block. Ä Ä For Tslot blocks, see page 9. Order number Slot connection Articulation connection For articulated clamping arms Mount Fig. M... TSlot 9060 9070 69700 M 6 M 6 M 4 M 8 M 8 M 0 M 8 SU MU SU Vertical Vertical Horizontal 64 Schienenfix. Base and structural elements
Thread adapter Reducer for mounting articulated clamping arms. Width across flats 3 mm. Stainless steel. M... Order number Male thread Female thread 64900 600 6900 7000 700 97800 UNC /4 UNC 0 3 M M6 M6 M8 M8 M8 M8 M8 M0 M0 Rotary unit Attachment unit having a defined 90 rotation pattern. The unit enables a smallparts clamp or a magnetic retainer, for example, to be turned to any one of four positions. Stainless steel. Example application Order number Length Connection Connection 69600 30 female male Base and structural elements. Schienenfix 6
Base and structural elements Quickchange mount Quickchange mount. Fitted onto quickaction clamp SWA 39, or with Tslot block for fitting to Tslot. Stainless steel. TSlot SWA 39 Order number Length Width Height Width across flats Mount Fig. 3460 3400 60 60 7 34 3 Tslot SWA 39 Angular mounts Fixed 90 angular mount for modules. Hardcoated aluminium. SWA 39 M... TSlot Order number Anchorage Fig. 3460 3000 By SWA 39 quickchange mount By screws up to M 6 66 Schienenfix. Base and structural elements
Rotary swivel mount Lockable rotary spindle with connection. Angles of rotation are freely adjustable. Alternatively, the mount can be turned through defined increments of 30. For horizontal alignment, the spindle has a swivel range of ±. The mount can be fitted onto the toothed rail or directly onto the measuring bench using M 6 screws. Hardcoated aluminium/steel. Scope of delivery Includes Tslot block and fastening screw for mounting on toothed rail. Control apparatus. TSlot M... Order number Centre height Swivelling Weight 34900 3 ± 0.7 Example application Base and structural elements. Schienenfix 67
Clamping elements Spring clamp for horizontal clamping Spring clamp for clamping workpieces on toothed rails horizontally. Versions with different spring lengths and for right or left direction of clamping. Small parts can be clamped at an angle using the bent spring version. Clamp effect achieved by tilting with spring clamp mount ( mm square). 3 4 Brass/stainless steel. Mount L Example application L T Mount T L Order number Mount Clamping direction T L L Fig. 34900 34900 349300 349400 6900 6800 3490 3490 Left Right Left Right Left (suitable only for angle 68900) Right (suitable only for angle 68900 Left Right 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 60 60 66 66 66 3 3 34 34 0 0 34 0 3 4 68 Schienenfix. Clamping elements
Spring clamp for vertical clamping Spring clamp for the vertical clamping of test parts on rail elements. Clamp effect achieved by tilting with spring clamp mount ( mm square). Hardcoated aluminium/steel. Ø 7 L L T Order number Mount Version T L L 6900 6800 Round Round.. 0 70 34 0 Mounts for spring clamps Clamping column ( mm square) for Tslots, enabling the mounting of spring clamps. Hardcoated aluminium. TSlot Order number Mount Length 6800 68600 68700 0 30 0 Clamping elements. Schienenfix 69
T Clamping elements Spring clamp for vertical clamping Spring clamp with quickchange mount. Using an articulated clamping arm, the spring clamp can be flexibly positioned. Stainless steel. L L Order number Mount Version T L L 69300 68300 Round Round.. 60 7 34 0 Spring clamp with mounting Spring clamp with mounting on toothed rail. Columns with M 4 threads can be mounted vertically or horizontally on the column bracket. Aluminium / stainless steel. Scope of delivery With spring clamp (343700), column (69043) and column bracket (790). Ä Ä For additional spring clamps, see the spannfix section on page 9 or for columns with other lengths, see page 60. TSlot Order number Length Width Height 679 90 4 70 Schienenfix. Clamping elements
Try square with spring clamp Toothed rail angle with Tslot and two spring clamps for clamping small parts. Using the integrated quickchange interface or SWA 8, the angle can be flexibly positioned with an articulated clamping arm on the measuring bench. Hardcoated aluminium/steel. Scope of delivery Includes Tslot blocks (68600) and spring clamps. For 68900: x 6900, x 6900 For 68800: x 34900, x 6900 ÄÄ Articulated clamping arms, see page 64. TSlot SWA 8 TSlot Order number Connection Side length Side height Tooth spacing 68900 68800 SWA 8 0 x 80 00 x 00 8 0 7. 0 Example application Clamping elements. Schienenfix 7
Clamping elements Screw frame, small Adjustable base rail with heightadjustable support. Scope of delivery x base rail (300), x mm extension element (30), x formed support (370). TSlot Order number Adjustment range Length Width Height 300 0 8 3 Small screw frame with spring clamp Adjustable base rail with heightadjustable support. With spring clamp for fixturing the workpiece. Scope of delivery x base rail (300), x mm extension element (30), x formed support (370), x 30 mm retaining plate (3370), x column for spring clamp (69043), x spring clamp (343700). Example application TSlot Order number Adjustment range Length Width Height 3006 0 8 80 7 Schienenfix. Clamping elements
T Accessories Base rail Adjustable base rail with slot and M6 mounting thread. Scope of delivery Incl. fastening screw and Tslot block Order number Adjustment range Total length Width Height 300 30 0 0 8 3 0 0 Retaining plates Mounting plates for spring clamp columns with M4 or M6 thread. For mounting on extension pieces or directly on base rail. Order number Thread for columns Mounting hole Overhang 3370 3380 M4 M6 6 6 30 0 Columns for spring clamps Columns for mounting spring clamps. Order number Column dia. Length Thread 6904 69043 69044 36800 36800 368300 4 4 4 6 6 6 30 0 7 30 0 7 M4 M4 M4 M6 M6 M6 Spring clamp Quick and easy clamping of workpieces. Spring clamp 34370 with narrow spring design. Order number Mount Ø T L Ø Mount 69037 343700 34370 30800 4 4 4 6 0.4 0.8 0.8.0 30 30 30 0 L Clamping elements. Schienenfix 73
Clamping elements Accessories (cont.) Supports Heightadjustable supports for supporting test parts. With M6 thread and an adjustment range of mm. Order number Version Length Fig. 370 3300 33060 33070 Formed support with 3 mm dome radius Selfaligning support, steel, +/ 0 Selfaligning support, plastic, +/ 0 Magnetic support, dia. 6 mm, magnetic force N 40 3 3 4 3 3 Extension elements Extension pieces with M6 male and female thread. Width across flats 7 mm. Order number Male thread Female thread Length 30 330 340 M6 M6 M6 M6 M6 M6 0 74 Schienenfix. Clamping elements
Horizontal clamp for toothed rails Horizontal clamp for mounting on toothed rails. Steel / hardcoated aluminium. Ä Ä Spacers can be used to increase the clamping range, see page 8. TSlot Order number Overhang Clamping range Height 336900 8 3 0 6 3 Example application Clamping elements. Schienenfix 7
Clamping elements mm precision vice Miniature vice with Vblock jaw. Includes SWA 39, or M 4 connection. Version in brass but also available in stainless steel. Hole separation on M 4 connectors is 4 mm. Scope of delivery Includes stainless steel (709) and plastic changeable jaws. ÄÄ For accessories, see the "Spannfix" section on page 69. SWA 39 M... Order number Version Jaw width Span Total height Fig. 7090 709 70900 7090 7090 709 SWA 39 SWA 39 x M4 x M4 4. 4. 4. 4. 4. 4. 6 6 7 7 Brass Stainless steel Brass Stainless steel Brass Stainless steel mm precision vice Miniature vice with Vblock jaw. Includes SWA 39, or M 4 connection. Version in aluminium but also available in stainless steel. Hole separation on M 4 connectors is 6. mm. Scope of delivery Includes stainless steel (7097) and plastic changeable jaws. ÄÄ For accessories, see the "Spannfix" section on page 70. SWA 39 M... Order number Version Jaw width Span Total height Fig. 70960 7096 7090 709 70970 7097 SWA 39 SWA 39 x M4 x M4 4. 4. 4. 4. 4. 4. 3 3 38 38 Aluminium Stainless steel Aluminium Stainless steel Aluminium Stainless steel 76 Schienenfix. Clamping elements
3 mm precision vice Miniature vice with Vblock jaw. Includes SWA 39 or M connection. Version in aluminium but also available in stainless steel. Jaws with holes (Ø mm) for lockpin action. Hole separation on M connectors is 83 mm. Scope of delivery Includes stainless steel (7086) and plastic changeable jaws. ÄÄ For accessories, see the "Spannfix" section on page 7. SWA 39 M... Order number Version Jaw width Span Total height Fig. 7080 708 70860 7086 SWA 39 SWA 39 x M/4 x M4 x M 3 3 3 3 34. 34. 34. 34. 3 3 Aluminium Stainless steel Aluminium Stainless steel Example application Clamping elements. Schienenfix 77
Clamping elements 0 mm precision vice Vice with exchangeable guide columns for extending clamping span. With stepped jaws and holes (Ø 4 mm) for lockpin action. Versions with and without SWA 39 quickchange adapter, as well as with and without accessories. The version without quickchange adapter contains 4 support surfaces, at right angles to one another. Surfacehardened steel. Scope of delivery Versions with accessories incl. adjustable stop (380) and extra column set for extending the clamping span to 7 mm. Plus 4 pins and magnetic knurled knob (80). Ä Ä A quickchange adapter (39700) can be mounted on versions without SWA 39 subsequently, see the "Spannfix" section on page 49. ÄÄ For accessories, see the "Spannfix" section on page 7. SWA 39 M... Order number Jaw width Version Accessories Span Weight Fig. 800 80 80 8 0 0 0 0 SWA 39 SWA 39 4 support surfaces 4 support surfaces incl. without incl. without 7* 3* 7* 3*.0 0.87.0 0.8 ** with extra column set, can be extended up to 0 mm. Example application 78 Schienenfix. Clamping elements
Stop unit set The stop unit teeth are fastened to the toothed rails and can be positioned anywhere along the Tslot. Complex parts can be positioned securely and reproducibly with three points of contact. The stop unit teeth are available in two lengths of aluminium or acrylic. Hardcoated aluminium or acrylic glass / steel Scope of delivery 3 x stop unit teeth and 3 x connector (34800). Order number Tooth length Version Fig. 34700 3470 3470 347 30 mm 30 mm 0 mm 0 mm Aluminium Acrylic Aluminium Acrylic Example application Clamping elements. Schienenfix 79
Clamping elements Acrylic glass Vblock 0 Vblock for fastening to toothed rails. Acrylic glass version. Ä Ä Spring clamps can be used to fix the parts, see pages 68 and 70. Example application TSlot Order number Width Height 67940 30 0 Acrylic glass / aluminium Acrylic glass rail element Rail element with mm or mm tooth spacing. For fastening to toothed rails. Acrylic glass version. Ä Ä Spring clamps can be used to fix the parts, see pages 68 and 70. TSlot Order number Width Height 6790 30 0 Acrylic glass / aluminium 80 Schienenfix. Clamping elements
Vblock with spring clamp Small 0 Vblock for the springclamping of parts. With quickchange mount or mounted on SWA 39. Scope of delivery Complete with bracket (343800) and spring clamp (343700). 3 SWA 39 Order number Clamping range Vblock length Mount Height Fig. 7740 77400 67900 Ø Ø Ø 0 SWA 39 SWA 39 4 4 3 Vblock with magnetic insert Small 0 Vblock for the clamping of parts using magnetism. Includes an quickchange mount. Hardcoated aluminium. Order number Clamping range Vblock length Mount Height 68000 Ø Clamping elements. Schienenfix 8
Clamping elements Vblock bracket 90 support for mounting small Vblocks on Tslot. The Vblocks can be clamped in different positions. Hardcoated aluminium/steel. ÄÄ Vblocks, see page 8. TSlot Order number Length Width Height 6790 0 4 Example application 8 Schienenfix. Clamping elements
Vsupport Vsupport set for horizontal fixturing of shafts. The ends of the test pieces can be seen through the openings in the mount. The Vsupports can be spaced as desired on the rail system. A Vblock is vertically adjustable. Width of support 4 mm. Aluminium / steel. Scope of delivery Two Vsupports with Tslot blocks, columns and spring clamps. TSlot Order number Clamping range Length Width Height 3400 Ø 8 7 0 40 Example application Clamping elements. Schienenfix 83
Clamping elements Tailstock, small Pair of tailstocks for mounting on Tslot with one fixed and one movable mount. The movable mount is springloaded and engageable. The tailstock centres are interchangeable for left/righthanded operation. When fitted on a toothed rail, the centre height of. mm can be increased with spacers or Tslot rails. Hardcoated aluminium/steel. Scope of delivery Includes tailstock centres Ø /60 ( x 34978), Tslot blocks and fastening screws. TSlot Order number Centre height 349600. (mounted on. mm toothed rail) Example application 84 Schienenfix. Clamping elements
Accessories Tailstock centres 60 centre for tailstocks. Steel. Order number Centre Diameter Version Fig. 34978 34976 34979 60 60 60 7 Stepped Hollow centres The length of the test piece can be discovered seen through the slots. Order number Centre Clamping range Gap width Fig. 349700 34970 34970 34970 349730 3497 90 90 90 90 90 90 Ø 0. Ø 0. 0 Ø Ø 4 3 Ø 4 30 Ø 0 0.3 0.4 3 3 Stepped hollow centres The length of the test piece can be discovered seen through the slots. Steel. Order number Centre Clamping range Gap width 3497 90 Ø 4 3 3 Spacers pair spacers to increase tailstock height. Hardcoated aluminium. Order number 349640 34964 Height 30 Tslot Clamping elements. Schienenfix 8
Clamping elements Precision mini chuck Precision mini chuck featuring outwardly stepped clamping jaws. For clamping the inside and outside of rotationally symmetrical parts. Mounted on quick change adapters SWA 39 or. Hardcoated aluminium/steel. SWA 39 Order number Connection Internal clamping Ø External clamping Ø Height Diameter Fig. 83700 83900 8300 83600 83800 SWA 39 SWA 39 SWA 39 0 3 0 0 8 0 3 0 3 9 8 3 3 9 9 79 90 60 80 4 3 Example application 86 Schienenfix. Clamping elements
0 mm precision threejaw chuck Threejaw chuck featuring outwardly stepped clamping jaws. For clamping the inside and outside of rotationally symmetrical parts. With three additional pins (Ø mm) on the top of each jaw for raising the height at which small parts can be clamped. The pins can be removed. With or without an SWA 39 quickchange adapter. Alternatively with MK mount. Hardcoated aluminium/steel. Scope of delivery Extra set of changeable jaws with inwardly stepped jaws. Control apparatus. Ø0 Ø37 Ø,9 Ø9 Ø7,8 Ø37 37, 4 4 8 Ø Ø4 Ø3 H7 Ø M4 (3x) 3 SWA 39 M... MK Order number Size Connection Height Fig. 3970 3970 397 0 0 0 SWA 39 3 x M4 MK * 8 38 46. 3 ** Additional mounts available on request. Clamping elements. Schienenfix 87
Clamping elements 6 mm precision threejaw chuck Threejaw chuck featuring outwardly stepped clamping jaws. For clamping the inside and outside of rotationally symmetrical parts. With three additional pins (Ø mm) on the top of each jaw for raising the height at which small parts can be clamped. The pins can be removed. With or without an SWA 39 quickchange adapter. Alternatively with MK mount. Hardcoated aluminium/steel. Scope of delivery Extra set of changeable jaws with inwardly stepped jaws. Control apparatus. Ø37 Ø,9 Ø64 Ø37 Ø9 Ø7,8 8 37, 4 4 Ø3 Ø4 Ø3 H7 M4 (3x) Ø66 3 SWA 39 M... MK Order number Size Connection Height Fig. 39700 3970 397 6 6 6 SWA 39 3 x M4 MK * 8 38 46. 3 ** Additional mounts available on request. 88 Schienenfix. Clamping elements
Nadelfix. Ideal for clamping formed parts. Includes SWA 39 quickchange mount. Version 39603 with approx. 30% reduced spring tension. Scope of delivery Includes clamping fixture, comprising rail (3960), column (69043) and spring clamp (69038). Fasteners included. Ä Ä Other Nadelfix clamping elements and accessories, see "Spannfix" section from page 9 onwards. 34 0 38 6 SWA 39 Order number Pin Ø Support surface Total height Spring deflection 396030 39603.. 38 x 34 38 x 34 max. 0 max. 0 Example application Clamping elements. Schienenfix 89
Clamping elements Smallparts clamp with stepped profile Smallparts clamp with stepped grip face. For clamping small parts. Springloaded grip. Includes an quickchange mount. T W Steel. Order number Clamping width Span (W) Clamping depth (T) Length 6700 6600 66600 6700. 3 8 0.6 0.6 0.6 0.6.... 80 80 80 80 Smallparts clamp, smooth Smallparts clamp with smooth grip face. For clamping small parts. Springloaded grip. Includes an quickchange mount. W Steel. Order number Clamping width Span (W) Length 6800 66000 6600 67000. 3 8 0.6 0.6 0.6 0.6 80 80 80 80 90 Schienenfix. Clamping elements
Smallparts clamp with Vblock Smallparts clamp with Vblock. For clamping rotationally symmetrical parts. Springloaded grip. Includes an quickchange mount. Steel. Order number Clamping width Clamping diameter Length 6900 6600 66700 6700.. 3. 0.3. 0..0. 3.0 3.0 4.0 80 80 80 80 Smallparts clamp with "screwtightened grip" Smallparts clamp. Fixturing of small parts achieved by screw preload. Includes an quickchange mount. W Steel. W T Order number Grip face Clamping width Span (W) Clamping depth (T) Length 6700 67600 Smooth Stepped 4.8 4.8 0 0.8 80 80 Clamping elements. Schienenfix 9
Clamping elements Stop unit for smallparts clamps Adjustable stop for smallparts clamp. Compatible with all springloaded smallparts clamps. Steel / stainless steel. Example application Order number Length Width Height 66800 7 7 Forked clamp Micro forked clamp for the fixturing of small parts by screw preload. Anchored by an quickchange mount. Stainless steel. Order number Jaw width Span Clamping depth 66900 4 0 9 Schienenfix. Clamping elements
Magnetic retainer Permanent magnet featuring an quickchange mount. Brass, neodymium. Order number Support Ø Magnetic force (N) Length 67800 6 Toggle clamps Toggle clamps with a clamping range of 0 mm. The clamping jaws can be turned. Optional version with guide pin. The clamping surfaces on the jaws are available in different versions. Either flat, or with a Vblock for fixing round workpieces in place, or alternatively with a convex surface for clamping very pressuresensitive workpieces. The clamping hands are mounted on quick change adapter. Stainless steel/steel/aluminium. Order number Clamping surface of lower jaw Clamping surface of upper jaw Version Fig. 78800 78600 78900 7900 3 flat, with longitudinal Vblock flat, with longitudinal Vblock and with convex surface With transverse Vblock With transverse Vblock 3 flat, with longitudinal Vblock flat, with longitudinal Vblock and with convex surface 3 flat, with longitudinal Vblock With flat surface Both jaws can be turned Both jaws can be turned Upper jaw can be turned With guide pin Clamping elements. Schienenfix 93
Other clamping elements Rotary tables Rotary table with spindle ratio reduction :40. Precise indexing thanks to graduated dial and vernier scale. Version with ER 6 collet chuck holder for collet chucks 0 0 mm or with threejaw chucks. Spindle clamped by screw. Aluminium / steel. Scope of delivery Includes control apparatus. Order number Version Spindle concentricity Vernier scale indexing accuracy Centre height 6000 600 with collet chuck holder with threejaw chuck, 6 mm ± 0.0 mm ± 0.04 mm ± 0 min. ± 0 min. 4 4 Example application 94 Schienenfix. Other clamping elements
Accessories Display unit Digital display unit for rotary tables. Display accuracy ± 0 s. Connection 30 V / 0 Hz. Scope of delivery Includes rotary encoders and connectors for standard rotary tables. Order number Length Width Height 600 3 0 8 Threejaw chuck For retrofitting to rotary tables. May require intermediate plates in order to raise the rotary table. Order number External Ø Max. radial runout 6330 63300 0 6 ± 0.04 ± 0.04 Collet chucks Collet chuck ER6 for rotary tables. Order number 63400 6340 6340 63403 63404 6340 63406 63407 63408 63409 Steel Clamping Ø 0 3 3 4 4 6 6 7 7 8 8 9 9 0 Other clamping elements. Schienenfix 9
Other clamping elements Accessories Rotary plate Base plate for rotary tables. With knurled screw which can be rotated through 360. Clamping option. Vernier scale for reading accuracy of 0.. Hardcoated aluminium. Order number Length Width Height 6700 0 0 30 Attachment plates for screwed connection Intermediate plates for rotary tables, for attachment to measuring instruments and for raising centres when used in conjunction with threejaw chucks. Order number Height Anchorage 6700 6300 0 30 Holes Ø 4.; spacing 60 and 80 Holes Ø 4.; spacing 60 and 80 Attachment plates for clamping claws Intermediate plates for rotary tables, for attachment to measuring instruments and for raising centres when used in conjunction with threejaw chucks. Order number Height Anchorage 6600 6800 0 30 with clamping claws with clamping claws 96 Schienenfix. Other clamping elements
Accessories Clamping claws Clamping claw set for the fixturing of attachment plates for rotary tables. With elongated hole for screws up to max. M 8. Scope of delivery Two claws with fastening screws to customer specification. Order number Adjustment range Length 63000 0 60 Mounting plate Base plate with quickchange mount SWA 39 for rotary tables for fitting on quickaction clamps. Hardcoated aluminium. Order number Length Width Height 6300 60 60 0 SWA 39 Intermediate plate 0 mm spacer plate for raising rotary tables. Hardcoated aluminium. Order number Height 6300 0 Other clamping elements. Schienenfix 97
Other clamping elements Tailstock Pair of tailstocks featuring one fixed and one movable mount. The movable mount is springloaded and engageable. Gripped by Tslot (6 mm) on adjustable base plate or Spannfix plates. Hardcoated aluminium/steel. Scope of delivery Includes Tslot blocks and Ø / 60 centres. TSlot 6 Order number Centre height Length Width Height 306000 0 0 30 7 Example application 98 Schienenfix. Other clamping elements
Accessories Adjustable base plate Mounting plates with Tslot (6 mm) for the mounting of tailstocks and/or rotary tables. Suitable for transmitted light measurements on projectors. Continuously variable spindle adjustment with lock clamp. Plate can be fastened with clamping claws. Hardcoated aluminium/steel. Span 0 0 mm. Ä Ä Clamping claws, see page 97. Order number Length Width Height Version 60 370 0 600 370 0 With tailstock (movable mount only) TSlot 6 Live tailstock centre 60 live centre for movable tailstock mount. Stainless steel. Centre hardened. Order number Centre angle Diameter 3060 3060 60 60 0 0 Dead tailstock centres A pair of dead tailstock centres. Hardened steel. Order number Centre angle Diameter 30600 30600 306300 60 90 90 30 30 Other clamping elements. Schienenfix 99
Other clamping elements Multispannfix Universal clamping device for simple, quick fixturing of rotationally symmetrical and cubic parts. Stop frame height mm. Hardcoated aluminium / safety glass / acrylic glass stop frame. Scope of delivery Includes cone point (690). Order number Size Length Width Clamping range Fig. 6900 690 4 0 00 0 40 90 Example application 00 Schienenfix. Other clamping elements
Accessories Springloaded pressure clamp Springloaded pressure clamp with cone point and mount for Tslot. Stainless steel / brass. Order number Length Application 6907 6908 7 for size for size TSlot Cone point Clamping point for springloaded pressure clamp for high, precise transfer of clamping forces. Stainless steel. Order number Version 690 Cone point Movable clamping point Movable clamping point thanks to ball joint arrangement. Secure grip even if springloaded pressure clamps are not in perfect alignment. Stainless steel. Order number Version 6906 Movable clamping point Other clamping elements. Schienenfix 0
Other clamping elements Oktofix Fixturing system for optical measurement tasks involving transmitted light. Test parts can be freely positioned as desired using support pins and then fixtured by spring clamps. The clamping frame features horizontal mounting holes with Ø 4 mm for support pins and springloaded pressure clamps as well as vertical M 4 mounting threads for the mounting of clamping columns with spring clamp. The entire clamping frame can turn through 360. Hardcoated aluminium / stainless steel. Scope of delivery Includes base plate and rotating clamping frame, 3 x 80 mm support pins (6909), x eccentric (6903), x 40 mm spring clamps (69038), x 0 mm columns (69043). Order number Size Height Clamping range Fig. 6900 6900 4 4 7 00 Example application 0 Schienenfix. Other clamping elements
Accessories Spacer rings Order number Size Height 690 6906 Hardcoated aluminium Hardcoated aluminium For increasing the installation height by a further mm. Support pins Order number Length Shaft Ø 6908 6909 69030 69049 60 80 00 0 4 4 4 4 Stainless steel Stainless steel Stainless steel Stainless steel Support pins stepped on one side. Multipurpose support pin Order number max. Ø Vblock Length Shaft Ø 69034 0 90 4 Multipurpose support pin featuring a 0 Vsupport and a 7. mm angular stop. Eccentric supports Order number Disc Ø Length Shaft Ø Version 6903 69040 80 80 4 4 Flat support Vsupport Heightadjustable workpiece support (Ø mm) Support block Order number Length Width Height 69048 0 0 8 Stainless steel Support that acts as a stay and stop unit, ideal for a large surface area. Fixturing by two support pins. Springloaded pressure clamp Order number Length Spring deflection Shaft Ø 6903 69036 8 0 4 4 Stainless steel Stainless steel Test part clamping device. For direct anchoring in the mounting holes of the "Oktofix" system. Ä Ä Spring clamps and columns for spring clamps, see "Spannfix" section on pages 9 60. Other clamping elements. Schienenfix 03
Sets Schienenfix basic sets Clamping set for optical measurement tasks. For constructing a simple frame that can be anchored to the tapped holes in the measuring bench by clamping claws. Includes four spring clamps for quick and easy fixturing of test parts. There are sets with mm or 0 mm tooth spacing, each available in three versions for different measuring bench sizes. Ordering information All sets are supplied with M 4, M, M 6 screws. If the thread on your mount is different, please advise us at the time of order. ÄÄ Toothed rails for other bench sizes available on request. Set versions Order number Designation Tooth spacing Measuring window 699 699 6993 6990 6990 69930 Basic set, type "" Basic set, type "" Basic set, type "3" Basic set type "4" Basic set type "" Basic set type "6" 0 0 0 00 x 00 300 x 00 400 x 00 00 x 00 300 x 00 400 x 00 04 Schienenfix. Sets
Set content toothed rail with fine toothing Order number Designation Set "" Set "" Set "3" 3400 340 3440 3470 34600 348000 694...8 34900 34900 349300 349400 6800 Base rail, 0 mm / T Base rail, 30 mm / T Base rail, 40 mm / T Connecting rail, 00 mm / T Connecting rail, 00 mm / T Rail connecting pieces 4 mm clamping claw M 4 M 8 34 mm spring clamp, left 34 mm spring clamp, right 0 mm spring clamp, left 0 mm spring clamp, right Mount for spring clamp, 0 mm Screws M 4 / M / M 6 (3 of each) 3 4 3 4 3 4 Set content toothed rails with standard toothing Order number Designation Set "4" Set "" Set "6" 34000 3400 34400 34700 346000 348000 694...8 34900 34900 349300 349400 6800 Base rail, 0 mm / T 0 Base rail, 30 mm / T 0 Base rail, 40 mm / T 0 Connecting rail, 00 mm / T 0 Connecting rail, 00 mm / T 0 Rail connecting pieces 4 mm clamping claw M 4 M 8 34 mm spring clamp, left 34 mm spring clamp, right 0 mm spring clamp, left 0 mm spring clamp, right Mount for spring clamp, 0 mm Screws M 4 / M / M 6 (3 of each) 3 4 3 4 3 4 Sets. Schienenfix 0
Sets Schienenfix expansion sets for turned parts Expansion set featuring various support and clamping elements for rotationally symmetrical parts. The modules are designed to be attached to Schienenfix toothed rails. "Standard" set "Small" set Set versions Order number 6990 699 Designation "Standard" Schienenfix turned part expansion set "Small" Schienenfix turned part expansion set Set contents Order number Designation "Standard" set "Small" set 67900 6790 7330 83300 3970 3400 349600 Vblock with spring clamp Vblock bracket Quickaction clamp Quickaction clamp 90 angle element 0 mm precision threejaw chuck Vsupports ( pair) with spring clamp Tailstock 06 Schienenfix. Sets
Schienenfix milled and sheet parts expansion sets Expansion sets with different clamping elements for milled and sheet parts. The modules can be attached to Schienenfix toothed rails. "Standard" set "Small" set Set versions Order number 69960 6996 Designation "Standard" Schienenfix milled and sheet parts expansion set "Small" Schienenfix milled and sheet parts expansion set Set contents Order number Designation "Standard" set "Small" set 6600 6900 7330 83300 800 8300 34900 Smallparts clamp with stepped profile Multispannfix Quickaction clamp Quickaction clamp 90 angle element 0 mm precision vice Cylindrical pins for raised parts clamping Rotary swivel mount Sets. Schienenfix 07
Sets 3point support set 3point support for sheet metal parts, bent components and formed parts. Flexible adjustment of supports in X, Y and Z directions. Quick and easy fixturing of the workpiece using spring clamps. The adjustable base rails can be fixtured flexibly along the Tslot on the toothed rails. The supports are heightadjustable. Further height differences are possible using extension pieces. Set version Order number Designation 6996 3point support set Set contents Order number Designation "Standard" set 3006 330 340 3300 6904 Screw frame with spring clamp mm extension elements 0 mm extension elements Steel selfaligning supports Columns for 30 mm spring clamp 3 3 3 3 Example application 08 Schienenfix. Sets
Pallets with clamping elements Pallets with clamping elements fitted differently. ÄÄ The clamped workpieces are example applications, and not supplied with the order. Set versions Order number Basic pallet Scope of delivery Fig. 3480 Pallet with tailstock 30 x 00 x 0 349600 348 Pallet with tailstock 9 x 00 x 0 349600 34803 Pallet with 6 tailstocks 30 x 00 x 0 without tailstock centres 34804 Pallet with precision vice 30 x 00 x 0 83300, 800 3 3484 Pallet with precision vice 9 x 00 x 0 83300, 800 3480 Pallet with mini chuck and rotary/swivel mount 348 Pallet with mini chuck and rotary/swivel mount 30 x 00 x 0 34900, 83600 4 9 x 00 x 0 34900, 83600 34806 Pallet with small Vblock 30 x 00 x 0 6790, 67900 3486 Pallet with small Vblock 9 x 00 x 0 6790, 67900 34807 Pallet with Vsupport 30 x 00 x 0 3400 6 3487 Pallet with Vsupport 9 x 00 x 0 3400 Sets. Schienenfix 09
Sets Universal clamping sets Clamping set for quick and flexible clamping of round and cubic workpieces, such as plastic, punched and turned parts. The clamping elements can be placed directly onto the measuring bench or, if the quickchange adapter SWA39 is fitted, they can be positioned using the swivel unit. Set versions Order number Designation Fig. 6980 698 "Universal with swivel unit" clamping set incl. case "Universal" clamping set incl. case 0 Schienenfix. Sets
Set contents Order number Designation "Universal with swivel unit" set "Universal" set 7090 70860 8 8300 67900 7060 39700 3400 3970 mm precision vice 3 mm precision vice 0 mm precision vice Cylindrical pins with stepped profile, 4 pcs, for vice Vblock with spring clamp Swivel unit with attachment plate and quickaction clamp Adapter plate SWA39 for 3 mm and 0 mm vices Adapter plate SWA39 for mm vice or Vblock 0 mm precision threejaw chuck with SWA 39 quickchange adapter The clamping elements contained in the set. The clamping elements can be placed directly onto the measuring bench or they can be positioned at any angle using the swivel unit. Sets. Schienenfix
Sets Clamping component sets For optical measuring instruments and microscopes. For clamping plastic, punched or turned parts, for example. The base is a highquality articulated clamping arm, on which clamping elements such as a mini chuck, spring clamp or toggle clamp can be mounted. Ordering information When ordering, please tell us the mounting thread or Tslot size of your measuring bench. Set versions Order number Designation Fig. 6980 698 "Standard model II" clamping component set with storage box "Small model II" clamping component set with storage box Schienenfix. Sets
Set contents Order number Designation "Standard model II" set "Small model II" set 96800 68900 6800 6800 83600 67900 6600 78800 69300 69600 69700 70900 333000 Customer specification Articulated clamping arm, model SU Try square with spring clamp containing: 0 x 80 mm try square columns for spring clamps (68600) Lefthand spring clamp for horizontal clamping (6900) 3 mm spring clamp for vertical clamping (6900) Righthand spring clamp for horizontal clamping 0 mm spring clamp for vertical clamping Precision mini chuck Vblock with spring clamp Smallparts clamp with stepped profile Toggle clamp Spring clamp with SWA Rotary unit Satellite mount, horizontal mm precision vice Fourway hexagon socket spanner Adapter or Tslot block (see ordering information) Example application Sets. Schienenfix 3