Thank you for shopping with GLT, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone s favourite way to spend their time, so we ve tried to make assembling this item as quick and painless as possible. Desk ureau L4158 opefully our efforts will have been worthwhile and you ll sail through the whole process. ut if it all feels a bit too much like hard work, then we do have an assembly company we can recommend: the latpack onstruction ompany offers a nationwide service and can be contacted on 0843 289 4951 or www.flatpackconstruction.co.uk. few important pointers before you start: Please read the instructions right through before you start, and check that all the components have been included in the pack; we find separating all the hardware into piles makes it easier to be sure that everything is present and correct. Make sure you have the right tools. llen keys are provided if required, but screw drivers and other tools are not. You ll find details of the tools you need at the beginning of the instructions. It s a good idea to build the unit in the room where you are going to be using it, to avoid the need to move it after it s been assembled. Do not throw away any packing materials until assembly is complete, just in case you accidentally discard smaller parts or hardware. ssembly Difficulty easy - medium - hard one-person job V1 31/10/2016 1
Safety Warnings: dult assembly required. Unassembled product contains small parts which may present a choking hazard. hildren should be kept away from the product during assembly to avoid any possible risk of injury. DO NOT use power tools in the assembly of this product as there is a risk of over-tightening and consequently splitting of the wood. Max weight load 5kg. Do not overload. Not suitable to support televisions or computer display screens. pply the protective pads to the underside of the bureau side panels in contact with the desk/table surface. heck all fixtures and fittings regularly and tighten as necessary. Please retain these instructions for future reference. ustomer Service: If you find that any components are missing or damaged, please do not begin assembly and do not use the item. Please contact GLT ustomer Services on 0344 848 6000 immediately. We do stock spare hardware packs at our warehouse, so we should be able to send you a replacement pack immediately if required. Product are: Wipe clean using a soft damp cloth followed by a dry cloth. Do NOT use cleaning products which contain ammonia, solvents or abrasive material. Do NOT expose the item to extremes of heat and humidity. ould we do better? If there is anything you think could be improved in these instructions or in the assembly of this product we d be grateful if you could let us know; we ll pass any helpful hints and tips on to other customers via our website and update the instructions. ll you need to do is drop us a line at instructions@gltc.co.uk Thank you 2
omponent heck List omponent heck List 1x L Side Panel 1x R Side Panel D 10x am Dowels 35mmL 10x am Locks 14mm Diameter 1x ase Panel 1x Divider Panel #4 E 1x ack Panel 1x Top Panel 6x Screws 40mmL 2x Drawer Stops G #5 2x ookend Panels 2x Drawer L Side Panels I 2x Screws 12mmL 16x Screws 20mmL 2x Drawer ack Panels 2x Drawer R Side Panels You will need (not supplied) K L 2x Drawer ase Panels 2x Drawer ront Panels Phillips ead Screwdriver 3
STEP 1: Insert 2x cam dowels () into the side panels. STEP 3: Secure the divider panel D to the base panel. ardware for Step 1: ardware for Step 3: D 4x am Dowels 2x Screws 40mmL STEP 2: Keeping the grooves aligned, locate the side panels & onto the base panel and secure in place using the cam lock hardware (). STEP 4: Slide back panel E into the grooves of the panels as shown. E ardware for Step 2: 4x am Locks 4
STEP 5: STEP 7: G Place the top panel onto the rest of the unit and fix in place with 6x cam locks () and turn clockwise to lock. G ardware for Step 5: 4x Screws 40mmL D #4 #5 #4 #5 ardware for Step 6: 6x am Dowels 2x #4 Screws 2x #5 Drawer Stops STEP 6: Turn the top panel over and insert 6x cam dowels. Secure 2x drawers stops with 2x short screws (#5) ensuring the curved up end faces the groove in the top panel. ardware for Step 7: 6x am Locks 5
STEP 8: reate the drawers ttach the drawer sides panels & to the drawer back I. Repeat for the second drawer. STEP 10: it the drawer front panel L to the drawer. Repeat for the second drawer. I L ardware for Step 8: ardware for Step 10: 8x Screws 20mmL 8x Screws 20mmL STEP 9: Slide in the drawer base panel. STEP 11: Insert both drawers into the desk bureau ensuring the drawer stops engage properly. Ensure the protective pads are attached to the underside of the side panels before use. K I 6 opyright 2017 G.L.T.. Ltd. ll rights reserved. Great Little Trading ompany and GLT are registered trade marks of G.L.T.. Limited.