PDR Series INSTALLATION INSTRUCTIONS. Large Flat Panel Dual Arm Wall Mount

Similar documents
PNRIW Series INSTALLATION INSTRUCTIONS. Large Flat Panel In-Wall Swing Arm Mount

J-Series INSTALLATION INSTRUCTIONS. Medium Flat Panel Wall Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

PNRIW / PNRIWU INSTALLATION INSTRUCTIONS. Large Flat Panel In-Wall Swing Arm Mount

TA410 INSTALLATION INSTRUCTIONS. Portrait Adapter Bracket. Instrucciones de instalación Installationsanleitung Instruções de Instalação

PAC715 INSTALLATION INSTRUCTIONS. Video Conferencing Shelf. Instrucciones de instalación Installationsanleitung Instruções de Instalação

MPT6000 INSTALLATION INSTRUCTIONS. Hospitality Swing Arm Tilt Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

FSM Series INSTALLATION INSTRUCTIONS. Small Flat Panel Static Wall Mount

PAC716 INSTALLATION INSTRUCTIONS. Video Conferencing Camera Shelf. Instrucciones de instalación Installationsanleitung Instruções de Instalação

PSMH2682 INSTALLATION INSTRUCTIONS. Large Flat Panel Static Wall Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

CMS390/CMS391 INSTALLATION INSTRUCTIONS. 16"/24" Adjustable On-Center Ceiling Plate

ENS INSTALLATION INSTRUCTIONS LATERAL SHIFT EXTRUSION. Instrucciones de instalación Installationsanleitung Instruções de Instalação

FCA611 INSTALLATION INSTRUCTIONS. Small Shelf for Fusion Cart/Stand. Instrucciones de instalación Installationsanleitung Instruções de Instalação

INSTALLATION INSTRUCTIONS. Single Ceiling Mount PCS SERIES

MWH INSTALLATION INSTRUCTIONS. Medium Flat Panel Wall Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

PWR INSTALLATION INSTRUCTIONS. Large Flat Panel Wall Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

TA100/200/250 INSTALLATION INSTRUCTIONS. Video Conferencing and Component Shelves

INSTALLATION INSTRUCTIONS. Large Flat Panel Display Table Stand PTS SERIES

PSMO2086 INSTALLATION INSTRUCTIONS. Outdoor Large Flat Panel Static Wall Mount

INSTALLATION INSTRUCTIONS. Medium Panel Pole Mount JPP SERIES

ESS-42 INSTALLATION INSTRUCTIONS. Elite Speaker Stand. Instrucciones de instalación Installationsanleitung Instruções de Instalação

FTRV / FTR4100 INSTALLATION INSTRUCTIONS. Small Flat Panel Tilt Wall Mount

INSTALLATION INSTRUCTIONS. Mid-Size Table Mount MTSAV, -BV, -CV

FTRV / FTR4100 INSTALLATION INSTRUCTIONS. Small Flat Panel Tilt Wall Mount

KRA400/401 INSTALLATION INSTRUCTIONS. ipad Adapter Plates. Instrucciones de instalación Installationsanleitung Instruções de Instalação

FSRV / FSR4100 INSTALLATION INSTRUCTIONS. Small Flat Panel Static Wall Mount

MSP-TEQ9 INSTALLATION INSTRUCTIONS. Telescoping Leg Interactive Whiteboard Mount with Hanger Bracket

INSTALLATION INSTRUCTIONS

WBAP2 INSTALLATION INSTRUCTIONS. Adjustable Depth Whiteboard Mounting Platform

PCM SERIES INSTALLATION INSTRUCTIONS. Plasma Ceiling Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

FCA115 INSTALLATION INSTRUCTIONS. Extra Fusion Wall Plate. Instrucciones de instalación Installationsanleitung Instruções de Instalação

SB-CM32A12 INSTALLATION INSTRUCTIONS. All-Weather Ceiling Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

INSTALLATION INSTRUCTIONS. Locking Projector Mount MSP-CCS3

FAC501 INSTALLATION INSTRUCTIONS IN-WALL ENCLOSURE. Instrucciones de instalación Installationsanleitung Instruções de Instalação

K1C1I2B INSTALLATION INSTRUCTIONS. K1 Single Column with ipad 2/iPad 3 Mount

OFB215 INSTALLATION INSTRUCTIONS. Office Furniture Bracket. Instrucciones de instalación Installationsanleitung Instruções de Instalação

INSTALLATION INSTRUCTIONS. Mobile Base Music Stand QMP1MB

MSP-DAR1B/DARKWD110B INSTALLATION INSTRUCTIONS. Extreme Pitch Wall Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

PAC516 INSTALLATION INSTRUCTIONS IN-WALL ACCESSORY BOX. Instrucciones de instalación Installationsanleitung Instruções de Instalação

FCA613 INSTALLATION INSTRUCTIONS. Large Shelf for Fusion Cart. Instrucciones de instalación Installationsanleitung Instruções de Instalação

INSTALLATION INSTRUCTIONS. Single and Dual Display Floor Stands. MF1, MF2, PF1, PF2 Series

PACCC1 INSTALLATION INSTRUCTIONS. Center Channel Speaker Mounting Accessory

PAC522 INSTALLATION INSTRUCTIONS IN-WALL ACCESSORY BOX. Instrucciones de instalación Installationsanleitung Instruções de Instalação

KWK-110 INSTALLATION INSTRUCTIONS. Height Adjustable Dual Arm with Keyboard Tray

K1S100/200 INSTALLATION INSTRUCTIONS. Slat Wall Monitor Arms. Instrucciones de instalación Installationsanleitung Instruções de Instalação

INSTALLATION INSTRUCTIONS. LCD Swivel Stand MSS6000

PAC511 INSTALLATION INSTRUCTIONS IN-WALL ACCESSORY BOX. Instrucciones de instalación Installationsanleitung Instruções de Instalação

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS. Single and Dual Display Floor Stands. MF1, MF2, PF1, PF2 Series

K3 Series INSTALLATION INSTRUCTIONS. Kontour Array Arm Series

WBM2 INSTALLATION INSTRUCTIONS. Interactive Whiteboard Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

SMA-602 INSTALLATION INSTRUCTIONS. Pipe Adapter for SL-151 Projector Lift

INSTALLATION INSTRUCTIONS. Display Carts. MFC, PFC Series

AVB SERIES INSTALLATION INSTRUCTIONS. Electrical Box and Security Covers. Instrucciones de instalación Installationsanleitung Instruções de Instalação

PWRSKU INSTALLATION INSTRUCTIONS. Large Flat Panel Steel Stud Wall Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

FHP INSTALLATION INSTRUCTIONS. Ceiling Mount

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS. CPU Enclosure - Pipe Mount Accessory CMA170

OFB210 INSTALLATION INSTRUCTIONS. Office Furniture Bracket. Instrucciones de instalación Installationsanleitung Instruções de Instalação

NW1 Racks INSTALLATION INSTRUCTIONS. Sectional Wall Rack. Instrucciones de instalación Installationsanleitung Instruções de Instalação

FCA613 INSTALLATION INSTRUCTIONS. Large Shelf for Fusion Cart. Instrucciones de instalación Installationsanleitung Instruções de Instalação

INSTALLATION INSTRUCTIONS. Center Table Support Bracket MSPINTC1

INSTALLATION INSTRUCTIONS. Freestanding and Wall Mount Floor Stands MSP-CSC1

K2W Series INSTALLATION INSTRUCTIONS. K2W Wall Mounts. Instrucciones de instalación Installationsanleitung Instruções de Instalação

RMT1 INSTALLATION INSTRUCTIONS. Universal Static Wall Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

BM-3003N INSTALLATION INSTRUCTIONS. Dual Stud Ultra Short Throw Wall Mount

INSTALLATION INSTRUCTIONS. Panamorph Lens Support PAN2

RLF1 INSTALLATION INSTRUCTIONS. Universal Static Wall Mount

NS2F INSTALLATION INSTRUCTIONS. Stackable Racks

PAC521N INSTALLATION INSTRUCTIONS IN WALL ACCESSORY BOX

K3F310 INSTALLATION INSTRUCTIONS. Triple/Dual Array Table Top Stand. Instrucciones de instalación Installationsanleitung Instruções de Instalação

QMP2MM1 INSTALLATION INSTRUCTIONS. Music Stand Height Adjust Single Monitor

SMA661 INSTALLATION INSTRUCTIONS. SL-236 Trim Kit (SP to FD) Instrucciones de instalación Installationsanleitung Instruções de Instalação

KSA1020 INSTALLATION INSTRUCTIONS. Wall and Desk CPU Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

TS110SU/TS118SU INSTALLATION INSTRUCTIONS. Small Thinstall Swing Arm. Instrucciones de instalación Installationsanleitung Instruções de Instalação

INSTALLATION INSTRUCTIONS. Multiple Projector Stacking System - Table Stand LCD2TS

JSB2090 INSTALLATION INSTRUCTIONS. Interface Bracket and Shelf Assembly. Instrucciones de instalación Installationsanleitung Instruções de Instalação

I N S T A L L A T I O N I N S T R U C T I O N S

CSPS/CSPR INSTALLATION INSTRUCTIONS. Component Storage Panel

MTMPU INSTALLATION INSTRUCTIONS FUSION PORTRAIT MEDIUM TILT MOUNT

KSA1013 INSTALLATION INSTRUCTIONS. Laptop Tray Accessory. Instrucciones de instalación Installationsanleitung Instruções de Instalação

PSMH2079 INSTALLATION INSTRUCTIONS. Large Flat Panel Static Wall Mount

K2W Series INSTALLATION INSTRUCTIONS. K2W Wall Mounts. Instrucciones de instalación Installationsanleitung Instruções de Instalação

CPA330 INSTALLATION INSTRUCTIONS. 8" Off-Set Ceiling Plate

WBM2E INSTALLATION INSTRUCTIONS. Extended Interactive Whiteboard Mount

PAC510, 515, 520 INSTALLATION INSTRUCTIONS IN WALL ACCESSORY BOX. Instrucciones de instalación Installationsanleitung Instruções de Instalação

PAC501 INSTALLATION INSTRUCTIONS IN-WALL ENCLOSURE

I N S T A L L A T I O N I N S T R U C T I O N S

ERS-18 INSTALLATION INSTRUCTIONS. Slanted Economy Rack. Instrucciones de instalación Installationsanleitung Instruções de Instalação

FCA540 INSTALLATION INSTRUCTIONS. Outlet Box Accessory. Instrucciones de instalación Installationsanleitung Instruções de Instalação

WMA1S INSTALLATION INSTRUCTIONS. Single Stud Wall Mount Accessory. Instrucciones de instalación Installationsanleitung Instruções de Instalação

FCA113 INSTALLATION INSTRUCTIONS. Fusion CPU Extender Accessory. Instrucciones de instalación Installationsanleitung Instruções de Instalação

MTMP1U INSTALLATION INSTRUCTIONS FUSION PORTRAIT MEDIUM TILT MOUNT

FCA510 / FCA515 INSTALLATION INSTRUCTIONS. Small/Medium Media Player Enclosures

INSTALLATION INSTRUCTIONS. Yamaha Speaker Adapter Accessory PAC-Y3

CMA330 INSTALLATION INSTRUCTIONS. 8" Off-Set Ceiling Plate. Instrucciones de instalación Installationsanleitung Instruções de Instalação

ODMLT INSTALLATION INSTRUCTIONS. Outdoor Universal Tilting Wall Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

USM-EPL INSTALLATION INSTRUCTIONS. Large Static Universal Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

FCA820/821 INSTALLATION INSTRUCTIONS. Fusion Center Accessory Shelf

CPA353 INSTALLATION INSTRUCTIONS. Clamp-Style Column Base

INSTALLATION INSTRUCTIONS LARGE FLAT PANEL MOUNTS MSP-DCCLTA1

Transcription:

INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação Istruzioni di installazione Installatie-instructies Instructions d installation Large Flat Panel Dual Arm Wall Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description PDR Series

PDR Series DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. Chief is a registered trademark of Milestone AV Technologies. All rights reserved. IMPORTANT WARNINGS AND CAUTIONS! WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding instructions. DIMENSIONS Installation Instructions WARNING: Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment, or voiding of factory warranty! It is the installer s responsibility to make sure all components are properly assembled and installed using the instructions provided. WARNING: Failure to provide adequate structural strength for this component can result in serious personal injury or damage to equipment! It is the installer s responsibility to make sure the structure to which this component is attached can support five times the combined weight of all equipment. Reinforce the structure as required before installing the component. The wall to which the mount is being attached may have a maximum drywall thickness of 5/8" (1.6cm). WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer s responsibility to make sure the combined weight of all components attached to the PDR does not exceed 00 lbs (90.7 kg). Use with products heavier than the maximum weight indicated may result in collapse of the mount and its accessories causing possible injury. PDR Series contains the following models: PDR000S / PDR000B PDRUS / PDRUB NOTE: CUSTOM INTERFACE BRACKET NOT SHOWN. THE CUSTOM INTERFACE BRACKET NEEDED FOR YOUR DISPLAY WILL ADD BETWEEN 1/" AND " IN DEPTH AND MAY AFFECT LOCATION OF DISPLAY ON THE MOUNT. SEE PSB-XXXX DRAWING ALSO. 57.5 Mounting Pattern 483 19.00 178 5 7.00 1.00 5 1.00 PRODUCT FEATURES WEIGHT CAPACITY [86] 3.40 DEPTH -17 0 500 19.69 560.04 406 16.00 600 3.6 END CAP TO END CAP

Installation Instructions PDR Series DIMENSIONS -- cont d Unit Depth Tilt Adjustment * Extended Retracted [86] 3.40 940 37.00 1003 39.50 *The range of adjustment will vary with different weight and depth screens Highest Height Setting 71.81 43 1.68 Lowest Height Setting 90 84 85 3.47 79 MAX 84 11.19 689 7.1 3 450 17.71 PDR FULL LEFT 3

PDR Series Installation Instructions LEGEND Tighten Fastener Apretar elemento de fijación Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixations Loosen Fastener Aflojar elemento de fijación Befestigungsteil lösen Desapertar fixador Allentare il fissaggio Bevestiging losdraaien Desserrez les fixations Phillips Screwdriver Destornillador Phillips Kreuzschlitzschraubendreher Chave de fendas Phillips Cacciavite a stella Kruiskopschroevendraaier Tournevis à pointe cruciforme Open-Ended Wrench Llave de boca Gabelschlüssel Chave de bocas Chiave a punte aperte Steeksleutel Clé à fourche Pencil Mark Marcar con lápiz Stiftmarkierung Marcar com lápis Segno a matita Potloodmerkteken Marquage au crayon Drill Hole Perforar Bohrloch Fazer furo Praticare un foro Gat boren Percez un trou Adjust Ajustar Einstellen Ajustar Regolare Afstellen Ajuster Hex-Head Wrench Llave de cabeza hexagonal Sechskantschlüssel Chave de cabeça sextavada Chiave esagonale Zeskantsleutel Clé à tête hexagonale 4

Installation Instructions PDR Series TOOLS REQUIRED FOR INSTALLATION 7/3" (5.5mm) # 9/16" PARTS NOTE: Listed PSBU interface bracket provided with Listed Model PDRUS/B, but not shown. B () [Cover] A (1) [PDR assembly] C () [End cap] D () [End cap] E (1) [Adjustment wrench] J (1) 5-1/" G (4).850x.393x.135 F (1) [Adjustment insert] H (4) 5/16 x 3" 5

PDR Series MOUNT INSTALLATION Installing Mount to Wall WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is the installer s responsibility to make sure the structure to which the mount is being installed is capable of supporting five times the combined weight of the mount and all attachments. 1. Determine mounting location taking into consideration display size and PDR s range of movement.. Using a stud sensor locate two wood studs 16 apart on center. (See Figure 1) Installation Instructions 8. Adjust mount lateral position left until lag bolts are seated in mounting slots in upper wall channel. (See Figure ) 9. Install two 5/16" x 3" lag bolts (H) and two 0.135" thick washers (G), through mounting holes in lower wall channel and into pilot holes. (See Figure ) 10. Tighten all hardware. DO NOT overtighten! 6 (H) x 8 (G) 1 (G) 3 9 (H) x Adjusting PDR Height Figure NOTE: Height adjustment range up to 1.08 inches. 3 1. Check PDR for the desired height. If needed, use the adjustment wrench (E) to adjust the PDR height. (See Figure 3) Turn adjustment nut clockwise to lower the unit height, or Turn adjustment nut counterclockwise to raise the unit height. 4 5 x 4 6 Figure 1 3. Place and level mount against wall, aligning mounting holes in upper and lower wall channels with studs. (See Figure 1) 4. Mark four mounting holes making sure mounting holes are located as close as possible to center of studs. (See Figure 1) 5. Drill four 7/3" pilot holes where the mounting holes were marked. (See Figure 1) 6. Install two 5/16" x 3" lag bolts (H) and two 0.135" thick washers (G), through mounting holes in upper wall channel and into pilot holes. DO NOT tighten at this time. (See Figure ) 7. Place mount against wall aligning mounting holes in upper wall channel with lag bolts, and hang mount on lag bolts making sure washers are located in front of mount.

Installation Instructions PDR Series WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SEVERE PERSONAL INJURY OR DAMAGE TO EQUIPMENT. Make sure mounting buttons on display are properly seated in mounting holes in faceplate. 1. Move mount faceplate to extended position by grasping faceplate and pulling outward away from wall.. While supporting both sides of display, align four mounting buttons on display or interface bracket with four mounting holes in faceplate. (See Figure 5) 3. Lower display into place listening for audible "click" to ensure recessed area of mounting buttons are properly seated in lower area of mounting holes and ClickConnect mechanism has engaged. (See Figure 5) and (See Figure 6) Adjustment nut NOTE: Holes are provided in the faceplate for use with a padlock or similar locking device, if desired. In addition, the pin and nut may be removed from the upper holes and moved to the lower holes for use as a more permanent locking device. (See Figure 6) Figure 3 Installing Covers and End Caps NOTE: The covers and end caps have pressure fitting ends that lock into place with each other. 1. Install cover (B) over the top bracket. (See Figure 4). Install end caps (C and D) into the cover and top bracket. (See Figure 4) 3. Repeat Steps 1 and for the lower mounting bracket. (See Figure 4) 3 (D) Figure 5 (B) 1 (C) To use as a more permanent lock, remove pin and nuts and move to lower holes. 3 Mounting the Display Figure 4 WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SEVERE PERSONAL INJURY OR DAMAGE TO EQUIPMENT. Displays can weigh in excess of 40 lbs (18.1kg). ALWAYS use two people and proper lifting techniques when installing display. A padlock or bolt may be placed through latch holes Figure 6 7

PDR Series Installation Instructions (J) cable clamps 1 x 4 Figure 7 Cable Management WARNING: IMPROPER INSTALLATION CAN LEAD TO SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Make sure cables do not run through pinch points. 1. Loosen front and rear cable clamps on top arm. (See Figure 7). Thread cable ties (J) under cable clamps and secure clamps to top arm. (See Figure 7) 3. Route power/audio/video cables through the cable channel in top arm (See Figure 7), allowing sufficient slack in cables for left/right movement of display and swing arm and also swing arm extension and retraction. 4. Secure cables to top arm using two cable ties (J). 5. Repeat Steps 1 through 4, as necessary, for remaining top arm and lower arms. Centris Select Adjustment Knob Figure 8 WARNING: IMPROPER INSTALLATION CAN LEAD TO SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! DO NOT route cables through holes in faceplate. Tension Adjustments Vertical Tilt Tension Adjustment 1. With display mounted, check for desired vertical tilt tension.. Adjust the Centris Select knob until desired vertical tilt tension is obtained. (See Figure 8) Vertical Tilt Lock Screw 3. To lock the mount at the desired vertical tilt, tighten the vertical tilt lock screw. (See Figure 9) Figure 9 8

Installation Instructions Lateral Tilt Tension Adjustment CAUTION: DO NOT OVERTIGHTEN LATERAL TILT ADJUSTMENT NUT. Overtightening lateral tilt adjustment will cause excessive wear and may distort adjustment components. 1. Using a 9/16 wrench (not provided), slightly tighten or loosen lateral tilt tension adjustment nut. (See Figure 10). Attach the display and check for desired tilt tension. 3. Repeat Steps 1 and until desired tilt tension is obtained. Rotational Tilt Tension Adjustment 1. If necessary, loosen or tighten bottom rotational tilt tension adjustment nut. (See Figure 10). Attach the display and check for desired rotational tilt tension. 3. Repeat Steps 1 and until desired rotational tilt tension is obtained. PDR Series After the top and bottom mounting brackets have been installed between two wood studs 16 on center, the swing arms can be adjusted or moved off center, depending on the location of the mount, the size of the display, and the lateral movement needed to rotate the display. The swing arms can be adjusted, as follows: Adjusting the Swing Arms Off-Center With no disassembly required, you can adjust the swing arms up to 1-inch to the left of center or up to 1-inch to the right of center. Reconfiguring the Swing Arms Left of Center With some disassembly and reassembly required, you can move the swing arms to the left of center by reconfiguring the mount. Use the first and third slotted holes in the top and bottom mounting brackets. Reconfiguring the Swing Arms Right of Center With some disassembly and reassembly, you can move the swing arms to the right of center by reconfiguring the mount. Use the third and fifth slotted holes in the top and bottom mounting brackets. Adjusting the Swing Arms Off Center 1. Remove the display from the mount. Lateral Tilt Adjustment Nut. Loosen four bolts (two on the top and two on the bottom) securing the swing arm assembly to the top and bottom mounting brackets (See Figure 11). 3. Move the swing arm assembly to desired location. 4. Tighten the bolts. 5. Install the display on the mount. Top Bolts Rotational Tilt Adjustment Nut Figure 10 Swing Arm Adjustments The dual swing arms are shipped installed in the center of the top and bottom mounting brackets, which is the standard mounting configuration. The top and bottom mounting brackets have slotted holes, allowing for lateral adjustment of the dual swing arms. Figure 11 Reconfiguring the Swing Arms to the Left or Right of Center 1. Remove the display from the mount.. Remove four bolts (two on the top and two on the bottom) securing the swing arm assembly to the top and bottom mounting brackets (See figure 14). 9

PDR Series Installation Instructions WARNING: The next step will release the arm assembly from the mount. The arms and plate may fall if you are not careful. 3. Move the swing arm assembly to desired location. Left of Center (See Figure 1). Right of Center (See Figure 13). 4. Install retaining pin assemblies (one top and one bottom) and secure using two bolts (one top and one bottom). 5. Install four bolts (two on the top and two on the bottom) to secure the swing arm assembly to the top and bottom mounting brackets. 6. Tighten the bolts. 7. Install the display on the mount. Top Bolts 1. Locate the adjustment insert (F) and wrench (E) provided with the mount.. Place adjustment insert into socket head cap screw located at swing arm pivot point. (See Figure 14) NOTE: The display may need to be repositioned in order to gain access to the tension adjustment screw(s). 3. Using the wrench provided with the mount, turn adjustment insert clockwise to increase swing arm tension or counterclockwise to reduce swing arm tension. (See Figure 15) NOTE: Small adjustments of 1/8 turn or less are typically all that is required to achieve desired tension. 4. Check swing arm tension. If desired tension is present, tension adjustment is complete. If additional tension adjustment is required, repeat steps and 3 until desired tension is achieved. NOTE: If changing from a smaller display to a larger display it may be necessary to increase swing arm tension. (E) (F) Bar Figure 1 Socket Head Capscrew Figure 14 Top Bolts Reduce Increase Figure 13 Swing Arm Tension Adjustment Swing arm tension is pre-set at the factory and is adjusted to accommodate displays with weights near the top of the mounts capacity. If smaller displays are used it may be difficult to reposition the display after mounting. Swing arm tension can be adjusted to compensate for smaller display by: NOTE: The display must be mounted prior to adjusting swing arm tension. Figure 15 10

Installation Instructions PDR Series Removing Display from Mount 1. Remove bolt or padlock from faceplate (if used). NOTE: The pin may have been used as a more permanent locking device. If so, remove nut and pin and move from the lower holes to the upper holes. 1 Remove bolt or padlock if used. Pull back on flag on upper mounting hole and press pin down into "Open" position. (See Figure 16) WARNING: DISPLAY MAY WEIGH IN EXCESS OF 40 LBS! Always use two people and proper lifting techniques when installing or positioning display on mount. 3. Carefully lift display from mount. 4. Lift up on pin and place flag back against faceplate to return it to "Closed" position. Pin in "Closed" position - move to "Open" position to remove display 4 Pin in "Open" position - move to "Closed" position after display is removed. Figure 16 11

PDR Series Installation Instructions Chief Manufacturing, a products division of Milestone AV Technologies 8831-000005 RevM 010 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 08/10 USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378 P 800.58.6480 / 95.894.680 F 877.894.6918 / 95.894.6918 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 66860 F +31 (0)40 668615 Asia Pacific A Office No. 1 on 1/F, Shatin Galleria 18-4 Shan Mei Street Fotan, Shatin, Hong Kong P 85 145 4099 F 85 145 4477