4G DOORS FRAMES HARDWARE

4G DOORS FRAMES HARDWARE! 31147 Plymouth Rd. Livonia MI 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com

Index Seamed Edge Doors - 1000 Series 20-Gauge Standard Doors - 1200 Series 18-Gauge Steel Stiffened Doors - 1300 Series 16-Gauge Steel Stiffened Doors - 1400 Series Maximum Duty Doors and Frames - MD1400 Series Retrofit / Replacement Doors - 1500 Series 16-Gauge Standard Doors - 1600 Series 6 Panel Doors - 1700 Series CVR Prepared Doors - 1800 & 1600 Series 18-Gauge Standard Doors - 1800 Series 2-Panel Doors - 1900 Series Single Panel Doors - SP1900 Series Honeycomb Core Doors - 2000 Series Double Egress - Honeycomb Core Doors - 6000 Series Temperature Rise Doors - 9000 Series Metal Louver Utility Doors - LV7000 Series 16-Gauge Double Egress Frames - 3000 Series 16-Gauge Expandable Masonry Frames - EXP4000 Series 16-Gauge Masonry Frames - 4000 / 4500 Series 14-Gauge Masonry Frames - 4100 Series 16-Gauge Expandable Drywall Frames - EXP5000 Series 16-Gauge Dry Wall Frames - 5000 Series Fabrication Components - 7000, 8000, 7500/7800 Series Vision Lite Low Profile - 45-180 Minute Fre Rated - SVL Series Vision Lite Standard Profile - 45/180 Minute Fire Related - VL Series Vision Lite Standard Profile - 45/180 Minute Fire Related - 10VL Series, For 1 Glass Divided Reverse Y Blade Louvers - 90 Minute Fire Rated - YLV Series Inverted Y-Blade Louvers - 90 Minute Fire Rated - VLV Series Adjustable Fusible Link Louvers - 90 Minute Fire Rated - FLLV Series Standard and Low Profile Vision Lite Kits - 45-180 Minute Fire Rated - SVL & VL Series Glass Accessories 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Seamed Edge Doors Seamed Edge 1000 Doors Series 1000 Series 16 and 18 Gauge Doors Cold Rolled or Galvanized Steel Tight Corner Seam Full Body Polystyrene Core or Honeycomb Core Non-Handed Design 12-Gauge Closer Reinforcement 7-Gauge Hinge Reinforcement- Reversible 16-Gauge Flush Top Cap - Galvanized Standard / Heavy Duty 16-Gauge Inverted Bottom Cap - Galvanized Prime Painted Grey Two Part Epoxy Factory Applied, Baked On Standard Lock Preparations Include 161, Fed 86 Edge, Panic Bar Reinforced WHI / ITS up to 3 hour, and S Smoke included Meets or Exceeds Standards for ANSI 250.4 and ANSI 250.8 Typical Hardware Preparations ANSI / SDI A115.1 MB (MORTISE) NON-HANDED HINGE ANSI / SDI A115.2 C (BORED) UNIVERSAL STRIKE A115.1 U Sections LOCK EDGE POLYSTYRENE CORE HINGE EDGE TOP VIEW CLOSER REINFORCEMENT CLOSER REINFORCEMENT CLOSED TOP MINIMUM CORE CLEARANCE 1 FROM TOP, 1/2 AROUND ALL HARDWARE REINF. TYPICAL SECTION F V N N N HG 1700 1900 1900 10 x 10 5 x 20 4 x 25 3 x 33 VLI N5LI N4LI N3LI GLI LI TLI L2 DKS Steel Door & Frame Systems, Inc. 1

20-Gauge Standard Doors 20-Gauge Standard 1200 Doors Series 1200 Series 20-Gauge Cold Rolled or Galvanized Steel Seamless Filled Edges Full Body Polystyrene Core Non- Handed Design 12-Gauge Closer Reinforcement 7-Gauge Hinge Reinforcement- Reversible 16-Gauge Flush Top Cap - Galvanized Standard / Heavy Duty 16-Gauge Inverted Bottom Cap - Galvanized Prime Painted Grey Two Part Epoxy Factory Applied, Baked On Standard Lock Preparations Typical Hardware Preparations ANSI / SDI A115.1 MB (MORTISE) NON-HANDED HINGE ANSI / SDI A115.2 C (BORED) Sections LOCK EDGE POLYSTYRENE CORE CLOSER REINFORCEMENT CLOSED TOP CLOSER REINFORCEMENT MINIMUM CORE CLEARANCE 1 FROM TOP, 1/2 AROUND ALL HARDWARE REINF. Include 161, Fed 86 Edge, Panic Bar Reinforced WHI / ITS up to 3 hour, and S Smoke included UNIVERSAL STRIKE A115.1 U Meets or Exceeds Standards for ANSI 250.4 and ANSI 250.8 HINGE EDGE TOP VIEW TYPICAL SECTION F V N N N HG 1700 1900 1900 10 x 10 5 x 20 4 x 25 3 x 33 VLI N5LI N4LI N3LI GLI LI TLI L2 2 DKS Steel Door & Frame Systems, Inc.

18-Gauge Steel Stiffened Doors 18-Gauge Steel Stiffened 1300 Doors Series 1300 Series 18-Gauge Galvanized Steel Seamless Filled Edges 22 Gauge Vertical Stiffeners on 6-inch Centers Hat Shaped Fiberglass Insulation Filled Cavities 1-5/8 thick 1.5 lb.cu.ft Beveled Strike Edge, Square Hinge Edge 7-Gauge Hinge Reinforcement- Standard / Heavy Duty Design 16-Gauge Top Cap 16-Gauge Inverted Bottom Cap 14-Gauge Lock Reinforcement 12-Gauge Closer Reinforcement Prime Painted Grey Two Part Epoxy Factory Applied, Baked On Standard Lock Preparations Include 161, Fed 86 Edge, Panic Bar Reinforced Approved for Double Egress Use WHI / ITS up to 3 hour, and S Smoke included Meets or Exceeds Standards for Sections Typical Hardware Preparations WELDED SEAMLESS LOCK EDGES BEVELED 1/8 IN 2 DENSE INSULATION BETWEEN STIFFENERS ANSI / SDI A115.1 MB (MORTISE) HINGE ANSI / SDI A115.2 C (BORED) SQUARE HINGE EDGE 22 GA. STIFFENERS 6 APART HORIZONTAL VIEW TOP CAP 16 GA. CHANNEL VERTICAL SECTION ANSI 240.4 and ANSI 250.8 F V N N N G L1 3 x 33 10 x 10 5 x 20 4 x 25 3 x 33 DKS Steel Door & Frame Systems, Inc. 3

16-Gauge Steel Stiffened Doors 16-Gauge Steel Stiffened 1400 Doors Series 1400 Series 16-Gauge Galvanized Steel Seamless Filled Edges 22 Gauge Vertical Stiffeners on 6-inch Centers Hat Shaped Fiberglass Insulation Filled Cavities 1-5/8 thick 1.5 lb.cu.ft Beveled Strike Edge, Square Hinge Edge 7-Gauge Hinge Reinforcement- Standard / Heavy Duty Design 16-Gauge Top Cap 16-Gauge Inverted Bottom Cap 14-Gauge Lock Reinforcement 12-Gauge Closer Reinforcement Prime Painted Grey Two Part Epoxy Factory Applied, Baked On Standard Lock Preparations Include 161, Fed 86 Edge, Panic Bar Reinforced Approved for Double Egress Use WHI / ITS up to 3 hour, and S Smoke included Meets or Exceeds Standards for Sections Typical Hardware Preparations WELDED SEAMLESS LOCK EDGES BEVELED 1/8 IN 2 DENSE INSULATION BETWEEN STIFFENERS ANSI / SDI A115.1 MB (MORTISE) HINGE ANSI / SDI A115.2 C (BORED) SQUARE HINGE EDGE 22 GA. STIFFENERS 6 APART HORIZONTAL VIEW TOP CAP 16 GA. CHANNEL VERTICAL SECTION ANSI 240.4 and ANSI 250.8 F V N N N G L1 3 x 33 10 x 10 5 x 20 4 x 25 3 x 33 4 DKS Steel Door & Frame Systems, Inc.

Maximum Duty Doors and Frames Maximum Duty Doors MD1400 and Frames Series MD1400 Series 14 Gauge Door 12 Gauge Frame 161 Prep and 3 Deadbolt Preps Polystyrene Core 2-3/4 Backset 3/8 Undercut 4-1/2 x 4-1/2 Heavy Duty Hinge Prep DKS Steel Door & Frame Locations +"#../!$%)&'),#0!&%!'+#../!)%!'+#.0 )'(# $%!'+#!"#!"# ("#!"#!"# $%&'(# )'(# )'(#!.2.% *%)'(#...2.% *%)'(#...2.% *%)'*# )*#!$%)&'),# +-%&'(# +"%&'),# )*%)'(# +(# &%!'+# *%!'+# )*# )*%-'),# )'(# -$%)'*#.1.!&%!'+#./!)%!'+#0 )'(#!'(# ()%)&'),#.1.!$%-'(#./!&%)&'),#0 DKS 31147 Steel Plymouth Door & Rd. Frame Livonia, Systems, MI Inc. 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com 5

Retrofit/Replacement Doors Retrofit / Replacement 1500 Series Doors 1500 Series Door Construction Reinforcement Detail 16 and 18 Gauge Doors Cold Rolled or Galvanized Steel Tight Corner Seam CLOSER REINFORCEMENT 35-3/4 1 1-3/16 Full Body Polystyrene Core Non-Handed Design 12-Gauge Closer Reinforcement Continuous 7-Gauge Channel Hinge Reinforcement Set at Heavy Duty A LOCK REINFORCEMENT VARIES A Depth - Full Height HINGE REINFORCEMENT 14-Gauge, 10-inch Lock Face Reinforcements 39-9/16 16-Gauge Flush Top Cap 16-Gauge Inverted Bottom Cap Prime Painted Grey Two Part SECTION A-A Epoxy Factory Applied, Baked On 9/16 5 7/32 Remove Skin at Desired Locations for Hinge Size - Template, Drill and Tap, 1-5/8 1-3/4 Apply Reversible Hinge Shim 25/32 25/32 ILLUSTRATION NOT TO SCALE 6 DKS 31147 Steel Plymouth Door & Frame Rd. Livonia, Systems, MI Inc. 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com

16-Gauge Standard Doors 16-Gauge Standard 1600 Series Doors 1600 Series 16-Gauge Cold Rolled or Galvanized Steel Seamless Filled Edges Full Body Polystyrene Core Non- Handed Design 12-Gauge Closer Reinforcement 7-Gauge Hinge Reinforcement- Reversible 16-Gauge Flush Top Cap - Galvanized Standard / Heavy Duty 16-Gauge Inverted Bottom Cap - Galvanized Prime Painted Grey Two Part Epoxy Factory Applied, Baked On Standard Lock Preparations Typical Hardware Preparations ANSI / SDI A115.1 MB (MORTISE) NON-HANDED HINGE ANSI / SDI A115.2 C (BORED) Sections LOCK EDGE POLYSTYRENE CORE CLOSER REINFORCEMENT CLOSED TOP CLOSER REINFORCEMENT MINIMUM CORE CLEARANCE 1 FROM TOP, 1/2 AROUND ALL HARDWARE REINF. Include 161, Fed 86 Edge, Panic Bar Reinforced WHI / ITS up to 3 hour, and S Smoke included UNIVERSAL STRIKE A115.1 U Meets or Exceeds Standards for ANSI 250.4 and ANSI 250.8 HINGE EDGE TOP VIEW TYPICAL SECTION F V N N N HG 1700 1900 1900 10 x 10 5 x 20 4 x 25 3 x 33 VLI N5LI N4LI N3LI GLI LI TLI L2 DKS Steel Door & Frame Systems, Inc. 7

6-Panel Doors 6-Panel 1700 Doors Series 1700 Series Typical Hardware Preparations 18 and 20 Gauge Cold Rolled Prime Painted Grey Two Part or Galvanized Steel Epoxy Factory Applied, Baked On Seamless Filled Edges Standard Lock Preparations Full Body Polystyrene Core Include 161, Fed 86 Edge, Non-Handed Design 12-Gauge Closer Reinforcement Panic Bar Reinforced WHI / ITS up to 3 hour, ANSI / SDI A115.1 MB (MORTISE) NON-HANDED HINGE 7-Gauge Hinge Reinforcement- and Standard / Heavy Duty S Smoke included 16-Gauge Flush Top Cap - Galvanized STC Rated 28, Model 32-1700 16-Gauge Inverted Bottom Cap - STC Rated 32 Galvanized ADA 10 inch Minimum Bottom Rail Meets or Exceeds Standards for ANSI 250.4 and ANSI 250.8 ANSI / SDI A115.2 C (BORED) UNIVERSAL STRIKE A115.1 U 35.75 23.0 6.125 35.75 23 4 7.125 4.5 35.75 23.0 5.375 7.125 4.5 7.5 6.5 SECTION X-X 0.04 0.14 35.5 25.5 25.5 65.125 X X 79.125 6.5 65.125 X X 83.125 6.5 79.125 X X 95.125 8 2.00 0.14 R12 0.50 21.5 21.5 21.5 0.11 0.11 0.24 9.125 5 9.125 10 9.125 5 9.125 12.625 9.5 4 9.5 10 3068 3070 3080 8 DKS 31147 Steel Plymouth Door & Rd. Frame Livonia, Systems, MI Inc. 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com

CVR Prepared Doors 1800 CVR Prepared & 1600 Series Doors 1800 & 1600 Series Typical Hardware Preparations 18 and 16 Gauge Cold Rolled or Galvanized Steel Seamless Filled Edges Polystyrene Core 7-Gauge Hinge Reinforcement - Reversible 16-Gauge Flush Top Cap - Galvanized 16-Gauge Inverted Bottom Cap - Galvanized Concealed Vertical Rod Top & Bottom Reinforcement Prepared WHI / ITS up to 3 hours, and S-Smoke included Meets or Exceeds Standards for ANSI 250.4 and ANSI 250.8 Prime Painted Grey Two Part Epoxy Factory Applied, Baked On! NON-HANDED HINGE *($%&12)1+4,- 1%&'+$,- 0 / #$# '((%&1)'2+'#,- 1%&'+$,-!3!3 '((%&1)'2+'#,- " 5(%&")1+4,- 42%&')1+4,- "''2%&$1)'+4,- "#$%&'()*+'#,- 2'%&",- 67389:%68.: 5(%&")1+4,- '("#%&4()1+$,- % 5(%&")1+4,- 1'%&';",- 42%&';+14,-!!. "1%&(;$5,- #*%&";5,- 67389:%68.: DKS 31147 Steel Plymouth Door & Rd. Frame Livonia, Systems, MI Inc. 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com 9

18 Gauge Standard Doors 18-Gauge Standard 1800 Doors Series 1800 Series 18-Gauge Cold Rolled or Galvanized Steel Seamless Filled Edges Full Body Polystyrene Core Non- Handed Design 12-Gauge Closer Reinforcement 7-Gauge Hinge Reinforcement- Reversible 16-Gauge Flush Top Cap - Galvanized Standard / Heavy Duty 16-Gauge Inverted Bottom Cap - Galvanized Prime Painted Grey Two Part Epoxy Factory Applied, Baked On Standard Lock Preparations Typical Hardware Preparations ANSI / SDI A115.1 MB (MORTISE) NON-HANDED HINGE ANSI / SDI A115.2 C (BORED) Sections LOCK EDGE POLYSTYRENE CORE CLOSER REINFORCEMENT CLOSED TOP CLOSER REINFORCEMENT MINIMUM CORE CLEARANCE 1 FROM TOP, 1/2 AROUND ALL HARDWARE REINF. Include 161, Fed 86 Edge, Panic Bar Reinforced WHI / ITS up to 3 hour, and S Smoke included UNIVERSAL STRIKE A115.1 U Meets or Exceeds Standards for ANSI 250.4 and ANSI 250.8 HINGE EDGE TOP VIEW TYPICAL SECTION F V N N N HG 1700 1900 1900 10 x 10 5 x 20 4 x 25 3 x 33 VLI N5LI N4LI N3LI GLI LI TLI L2 10 DKS 31147 Steel Plymouth Door & Rd. Frame Livonia, Systems, MI Inc. 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com

2-Panel Doors 2-Panel 1900 Series Doors 1900 Series Typical Hardware Preparations 18 Gauge Cold Rolled or Galvanized Steel Seamless Filled Edges Full Body Polystyrene Core Non-Handed Design ANSI / SDI A115.1 MB (MORTISE) NON-HANDED HINGE ANSI / SDI A115.2 C (BORED) UNIVERSAL STRIKE A115.1 U 12-Gauge Closer Reinforcement 7-Gauge Hinge Reinforcement- 35.75 Standard / Heavy Duty 16-Gauge Flush Top Cap - Galvanized VARIES WITH HEIGHT 23.0 6.375 16-Gauge Inverted Bottom Cap - Galvanized- ADA 10 inch Minimum Bottom Rail Prime Painted Grey Two Part Epoxy Factory Applied, Baked On SECTION Y-Y 0.04 37.0 Standard Lock Preparations Include 161, 161-DL, Fed 86 Edge, Panic Bar Reinforcement WHI / ITS up to 3 hour, and 2.0 0.14 R 0.49 0.14 65.0 6.5 79.125 (or 83.125 ) S Smoke included STC Rated 28, Model 32-1900 STC Rated 32 0.12 0.49 Y 21.5 Meets or Exceeds Standards for ANSI 250.4 and ANSI 250.8 0.12 0.24 6.375 Y 12.75 Warnock Hersey! DKS 31147 Steel Plymouth Door & Rd. Frame Livonia, Systems, MI Inc. 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com 11

Single Panel Doors Single SP1900 Panel Doors Series SP1900 Series 18 Gauge Cold Rolled or Galvanized Steel Seamless Filled Edges Full Body Polystyrene Core Non-Handed Design 12-Gauge Closer Reinforcement 7-Gauge Hinge Reinforcement- Standard / Heavy Duty Typical Hardware Preparations 16-Gauge Flush Top Cap - Galvanized 16-Gauge Inverted Bottom Cap - Galvanized ADA 10 inch Minimum Bottom Rail Prime Painted Grey Two Part Epoxy Factory Applied, Baked On Standard Lock Preparations Include 161, 161-DL, Fed 86 Edge, Panic Bar Reinforcement 2 6, 2 8, 2 10 WHI / ITS up to 3 hour, and S Smoke included STC Rated 28, Model 32-1900 STC Rated 32 Meets or Exceeds Standards for ANSI 250.4 and ANSI 250.8 3.0 22.835 26.75 ANSI / SDI A115.1 MB (MORTISE) SECTION Y-Y 0.4 0.8 0.8 0.31 NON-HANDED HINGE 0.8 1.57 65.75 65.75 ANSI / SDI A115.2 C (BORED) Y Y 0.4 0.8 Y Y UNIVERSAL STRIKE A115.1 U 12 DKS Steel Door & Frame Systems, Inc.

Honeycomb Core Doors Honeycomb 2000 Core Series Doors 2000 Series Sections 18/16 Gauge Cold Rolled HINGE EDGE TOP VIEW STRIKE EDGE or Galvanized Steel Seamless Filled Edges Full Body Honeycomb Core #90 Density Weight Non Handed Design 12 Gauge Closer Reinforcement 7-Gauge Hinge Reinforcement- HONEYCOMB CORE Typical Hardware Preparations CLOSED TOP CLOSER REINFORCEMENT CLOSER REINFORCEMENT Reversible 16-Gauge Top Cap - Galvanized ANSI / SDI A115.1 MB (MORTISE) 16-Gauge Inverted Bottom Cap - Galvanized Hardware Reinforced for 161, Fed 86 Edge, Panic Bar Application Prime Painted Grey Two Part NON-HANDED HINGE Epoxy Factory Applied, Baked On WHI / ITS up to 3 hour, and HONEYCOMB CORE DETAIL S Smoke included Meets or Exceeds Standards for ANSI / SDI A115.2 C (BORED) ANSI 240.4 and ANSI 250.8 VERTICAL SECTION 3 HR. LABEL STYLES 1-1/2 HR. LABEL STYLES 3/4 HR. LABEL STYLES F V N N N G L1 3 x 33 10 x 10 5 x 20 4 x 25 3 x 33 DKS 31147 Steel Plymouth Door & Rd. Frame Livonia, Systems, MI Inc. 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com 13

Double Egress Honeycomb Core Doors 6000 Series Sections 18/16 Gauge Cold Rolled HINGE EDGE TOP VIEW STRIKE EDGE or Galvanized Steel Seamless Filled Edges Full Body Honeycomb Core #90 Density Weight Non Handed Design 12 Gauge Closer Reinforcement 7-Gauge Hinge Reinforcement- HONEYCOMB CORE Typical Hardware Preparations CLOSED TOP CLOSER REINFORCEMENT CLOSER REINFORCEMENT Reversible 16-Gauge Top Cap - Galvanized ANSI / SDI A115.1 MB (MORTISE) 16-Gauge Inverted Bottom Cap - Galvanized Reinforced for Double Egress Surface Vertical Rod Application Prime Painted Grey Two Part NON-HANDED HINGE Epoxy Factory Applied, Baked On WHI / ITS up to 3 hour, and HONEYCOMB CORE DETAIL S Smoke included Meets or Exceeds Standards for ANSI / SDI A115.2 C (BORED) ANSI 240.4 and ANSI 250.8 VERTICAL SECTION 3 HR. LABEL STYLES 1-1/2 HR. LABEL STYLES 3/4 HR. LABEL STYLES F V N N N G L1 3 x 33 10 x 10 5 x 20 4 x 25 3 x 33 14 DKS 31147 Steel Plymouth Door & Frame Rd. Livonia, Systems, MI Inc. 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com

Temperature Rise Doors Temperature 9000 Rise Series Doors 9000 Series 1-3/4 Temperature Rise Doors 250 or 450 18 or 16 Gauge Cold Rolled or Galvanized Steel Seamless Filled Edges Full Body Mineral Core Non- Handed Design 12-Gauge Closer Reinforcement 7-Gauge Hinge Reinforcement- Standard / Heavy Duty Typical Hardware Preparations ANSI / SDI A115.1 MB (MORTISE) NON-HANDED HINGE Sections LOCK EDGE MINERAL BOARD CORE CLOSER REINFORCEMENT CLOSED TOP CLOSER REINFORCEMENT MINIMUM CORE CLEARANCE 1 FROM TOP, 1/2 AROUND ALL HARDWARE REINF. 16-Gauge Flush Top Cap - Galvanized 16-Gauge Inverted Bottom Cap - Galvanized ANSI / SDI A115.2 C (BORED) Prime Painted Grey Two Part Epoxy Factory Applied, Baked On Standard Lock Preparations Include 161, Fed 86 Edge, UNIVERSAL STRIKE A115.1 U HINGE EDGE Panic Bar Reinforced TOP VIEW TYPICAL SECTION WHI / ITS up to 3 hour, and S Smoke included Meets or Exceeds Standards for ANSI 250.4 and ANSI 250.8 3 HOUR LABEL STYLES 1-1/2 HOUR LABEL STYLES F V N N N 10 x 10 5 x 20 4 x 25 3 x 33 DKS 31147 Steel Plymouth Door & Rd. Frame Livonia, Systems, MI Inc. 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com 15

Metal Louver Utility Doors Metal Louver Utility LV7000 Doors Series LV7000 Series 22-Gauge Cold Rolled Steel Honeycomb Core Non-Handed Design!"#$#%&'()#!"#&'*#+,'-)!.'+/#!!!01!2!013!/-4/#!56781 Matches Timely s Residential Frame Hinge and Strike Locations Lock location 60 for 80 doors; 44 for 6 8 doors x 2 3 /8 backset with 1 x 1 1 /4 Square Corner Face Plate Flush Top / Inverted Bottom Prime Paint Finish, Powder Coat Lock preparation (161) Cylindrical or Blank Reinforced (BR) Wood reinforced hinge and lock locations Typical Hardware Preparations 6 8 DOORS A 8 DOORS A B B NON-HANDED HINGE X X C D B B ANSI / SDI A115.2 C (BORED) DOOR SIZE A B C D (X-X) IOG1 :65:9P1 9758P1 ------ EP5:9P1 WOOD HONEYCOMB WOOD GO :65:9P1 9P561 25.5 EP5:9P1 16 DKS Steel Door & Frame Systems, Inc. 9:09!;4(#<-=!>$#+4#3!?@AA#%B#3!?>!76606!!!!!!!;#)C!DE9EF!GGGH88IE!!!!!!!!J-2C!DE9EF!GGGH66IE!!!!!!!!KA-')C!&-)#&L*M&*@@%&5B@A!!!!!!!!N#(&',#C!<<<5*M&*@@%&5B@A

16-Gauge Double Egress Frames 16-Gauge Double Egress 3000 Frames Series 3000 Series 16-Gauge Cold Rolled Steel or A-40 Galvanized option Double Egress Profile WELDED AND GROUND SMOOTH (OPTIONAL) ARCWELDED INSIDE Exact fit mitered corner 7-Gauge Hinge Reinforcement Standard / Heavy Duty Adjustment Floor Anchors in all jamb sides Wall anchors for Masonry, Wood Stud, CORNER DETAIL Metal Stud and Strap Anchors 4-inch to 13-inch jamb depths 20-minute to 3-hour label FRAMES PROVIDED RIGHT HAND EXCEPT AS NOTED FRAME HEIGHT (MEASURED FROM BOTTOM TO DOOR RABBET) FRAME WIDTH (MEASURED BETWEEN DOOR RABBETS) 2 5/8 SPOTWELDED HINGE BACKSET K-D CORNER DETAIL FLOOR ANCHOR DETAIL 1/2 1 3/8 DKS 31147 Steel Plymouth Door & Rd. Frame Livonia, Systems, MI Inc. 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com 17

16-Gauge Expandable Masonry Frames 16-Gauge Expandable Masonry EXP4000 Frames Series EXP4000 Series Typical Hardware Preparations 16-Gauge A-40 Galvanized Steel 3-Piece System Designed to Adjust to Multiple Depth Wall Conditions Slide Rails along the Frame Throat Enables the Frame to Accomodate 4-1/2 x 4-1/2 1-3/4 FRAME HINGE PREP 4-7/8 UNIVERSAL STRIKE 5.625 to 8.75 Thick Walls Sections Three 7-Gauge 4.5 x 4.5 Hinge SIDE JAMBS (HINGE & STRIKE) HEAD JAMB Reinforcements for 6 8 and 7 0 Doors Four 7-Gauge 4.5 x 4.5 Hinge Reinforcements for 8 Doors Hinge Reinforcement Accepts Standard or Heavy Weight Template Hinges 12-Gauge ASA Strike Reinforcement Frame is Prepared for Silencer Operation 90 Minute WHI Mark as Standard!!"! #!$%&' EXTENSION 15 1 / 16# (! # )!*# 18 "!+,-.!/$.0 1,2$3$40!1.022-.0 DKS Steel Door & Frame Systems, Inc. 5675!8-90:;<!=40%-0>!?,@@0.&0>!?=!ABB7B!!!!!!!80CD!E"5"F!)))GHHI"!!!!!!!!/;JD!E"5"F!)))GBBI"!!!!!!!!K@;$CD!2;C02LMN2M,,.2O&,@!!!!!!!!P092$30D!:::OMN2M,,.2O&,@

16-Gauge Masonry Frames 16-Gauge 4000 Masonry / 4500 Frames Series 4000 / 4500 Series Typical Hardware Preparations 16-Gauge Cold Rolled or Galvanized Steel Unequal Rabbet / 2-inch Face 4-inch Face Heads Available 5/8-inch Stop Height Exact Fit Mitered Corners 7-Gauge Hinge Reinforcement with Standard / Heavy Duty Adjustment 4-7/8 Universal Strike Preparation 4-1/2 x 4-1/2 2-3/4 CYLINDRICAL STRIKE 1-3/4 FRAME HINGE PREP 4-7/8 UNIVERSAL STRIKE Features Floor Anchor Included 9/32-inch Silencer Preparation Wall Anchors for, Masonry, Wood Stud and Metal Stud Walls, Loose or Welded In. 4-13 Jamb Depth 20 Minute to Label Accessories WELDED CORNERS Welded corners are tight fitting to provide a smooth seamless apperance FLOOR ANCHOR 18 Gauge floor anchors are standard in all masonry frames STEEL STUD ANCHOR WOOD STUD ANCHOR MASONRY WIRE HINGE REINFORCEMENT 7 Gauge standard / heavy duty hinge reinforcement STRIKE REINFORCEMENT 14 Gauge strike reinforcements and mortar boxes are designed for accurate and universal function DKS 31147 Steel Plymouth Door & Rd. Frame Livonia, Systems, MI Inc. 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com 19

16-Gauge Masonry Frames 14-Gauge Masonry 4100 Frames Series 4100 Series Typical Hardware Preparations 14-Gauge Cold Rolled or Galvanized Steel Unequal Rabbet / 2-inch Face 4-inch Face Heads Available 5/8-inch Stop Height Exact Fit Mitered Corners 7-Gauge Hinge Reinforcement with Standard / Heavy Duty Adjustment 4-7/8 Universal Strike Preparation 4-1/2 x 4-1/2 2-3/4 CYLINDRICAL STRIKE 1-3/4 FRAME HINGE PREP 4-7/8 UNIVERSAL STRIKE Features Floor Anchor Included 9/32-inch Silencer Preparation Wall Anchors for, Masonry, Wood Stud and Metal Stud Walls, Loose or Welded In. 4-13 Jamb Depth 20 Minute to Label Accessories WELDED CORNERS Welded corners are tight fitting to provide a smooth seamless apperance FLOOR ANCHOR 18 Gauge floor anchors are standard in all masonry frames STEEL STUD ANCHOR WOOD STUD ANCHOR MASONRY WIRE HINGE REINFORCEMENT 7 Gauge standard / heavy duty hinge reinforcement STRIKE REINFORCEMENT 14 Gauge strike reinforcements and mortar boxes are designed for accurate and universal function 20 DKS 31147 Steel Plymouth Door & Frame Rd. Livonia, Systems, MI Inc. 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com

16-Gauge Expandable Drywall Frames 16-Gauge Expandable EXP5000 Drywall Frames Series EXP5000 Series Typical Hardware Preparations 16-Gauge A-40 Galvanized Steel 3-Piece System Designed to Adjust to Multiple Depth Wall Conditions Slide Rails along the Frame Throat Enables the Frame to Accomodate 4-1/2 x 4-1/2 1-3/4 FRAME HINGE PREP 4-7/8 UNIVERSAL STRIKE 5.625 to 8.75 Thick Walls Sections Three 7-Gauge 4.5 x 4.5 Hinge SIDE JAMBS (HINGE & STRIKE) HEAD JAMB Reinforcements for 6 8 and 7 0 Doors Four 7-Gauge 4.5 x 4.5 Hinge Reinforcements for 8 Doors Hinge Reinforcement Accepts Standard or Heavy Weight Template Hinges 12-Gauge ASA Strike Reinforcement Frame is Prepared for Silencer Operation!!"! #!$%&' EXTENSION 90 Minute WHI Mark as Standard 15 +!!,!!# 16 (! # )!*# "!-./0!1$02 3.4$5$62!30244/02 DKS 31147 Steel Plymouth Door & Rd. Frame Livonia, Systems, MI Inc. 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com 7+87!9/:2;<=!>62%/2?!@.AA20&2?!@>!BCC8C!!!!!!!92DE!F"7"G!)))HIIJ"!!!!!!!!1<KE!F"7"G!)))HCCJ"!!!!!!!!LA<$DE!4<D24MNO4N..04P&.A!!!!!!!!Q2:4$52E!;;;PNO4N..04P&.A 21

16-Gauge Drywall Frames 16-Gauge Dry Wall 5000 Frames Series 5000 Series Typical Hardware Preparations 16-Gauge Cold Rolled Steel Unequal Rabbet / 2-inch Face 5/8-inch Stop Height Exact Fit Mitered Corners with Screw Reinforcement Between Head and Jamb Sides 7-Gauge Hinge Reinforcement with Standard / Heavy Duty Adjustment 4-7/8 Universal Strike Preparation Screw Adjusting Compression Anchors 4-1/2 x 4-1/2 2-3/4 CYLINDRICAL STRIKE 1-3/4 FRAME HINGE PREP 4-7/8 UNIVERSAL STRIKE Features #18 GA. CORNER REINFORCEMENT on Jamb Side 9/32-inch Silencer Preparation 5-5/8-9-3/4 Jamb Depth 1/2 inch Double Returns 20 to 90 Minute Fire Label Frame Profiles 1/2 1/2 ADJUSTABLE COMPRESSION ANCHOR TYPICAL EACH HINGE AND STRIKE JAMB 2 STANDARD FRAME JAMB DEPTH WELDED SILL STRAPS, STANDARD (BASEHOLES OPTIONAL) 1/2 1/2 2 CASED OPENING FRAME JAMB DEPTH 22 DKS 31147 Steel Plymouth Door & Rd. Frame Livonia, Systems, MI Inc. 48150 734-883-7468 sales@4gdoors.com www.4gdoors.com

Fabrication Components 7000, 8000, Fabrication 7500/7800 Components Series 7000, 8000, 7500/7800 Series 7000 Series $8K4,--1$;*()1=$L;6(M$,6L.'/61'-($ $$$061*.'6; $8@$6(N$8!4567)*$<4!K$56;O6('P*N$ $$$Q4'(/=$,6/* Mullions 1-9/16 1-15/16 5/8 2 Fab Sticks 1-9/16 1-15/16 5/8 2 $R(*S76;$.6LL*1T$/62*N$-U*( $!4'(/=$,6/*$061*.'6; $J'();*$.*17.($062-(.> $#"Q#$1-$8K"3#4'(/=$N*U1=2 DEPTH VARIES 5/8 DEPTH VARIES SEE DEPTH CHART DEPTH CHART DEPTH RETURNS 5.75 7/16 6.75 1/2 7.75 1/2 8.25 1/2 8.75 1/2 8000 Series!"#$%$!"#$&'()*$+*'(,-./*0*(12$$ $$34567)*$+*'(,-./*0*(12$$ $$894567)*$:;--.$<(/=-.$$ $$5.*>$?.'0* $8K4,--1$;*()1=$L;6(M$,6L.'/61'-($ $$$061*.'6; $8@4567)*$/-;N$.-;;*N$Q4'(/=$,6/* $R(*S76;$.6LL*1 $V-7L;*$.*17.($N.>W6;; C L C L $#"@Q#$1-$X"3#4'(/=$N*U1=2 7500 / 7800 Series $8K4,--1$;*()1=$L;6(M$,6L.'/61'-($ $$$061*.'6; $R(*S76;$.6LL*1 $8@4567)*$<4!K$56;O6('P*N$6(N$ $$$$/-;N$.-;;*N$061*.'6; $&'()*$Y7;;'-(T$J1.'M*$Y7;;'-($6(N$ $$$$Z;6(M$Y7;;'-( 120 4-7/8 UNIVERSAL STRIKE C L 40-5/16 120 10-3/8 31-15/16 31-15/16 C L C L 120 10-3/8 29-15/16 29-15/16 C L C L $8K4,--1$='()*$6(N$21.'M*$[60L$'($ $$$$@A9B$6(N$3AKB$;-/61'-(2 FLOOR ANCHOR INCLUDED FLOOR ANCHOR (STICK ONLY) 3AKB$&CD5E$FGH<ICGDJ FLOOR ANCHOR (STICK ONLY) @A9B$&CD5E$FGH<ICGDJ \$&-7.$:'.*?-2'1'O*$?.*227.* S$$J0-M* DKS 31147 Steel Plymouth Door & Rd. Frame Livonia, Systems, MI 48150 Inc. 734-883-7468 sales@4gdoors.com www.4gdoors.com Q8!Q$I7L*W6>$<O*(7*T$H-00*./*T$H<$XKK!K$$$$ $$$I*;]$^\Q\_$999433@\$$$$ $$$$:6%]$^\Q\_$9994KK@\$$$$ $$$$E06';]$26;*2`NM2N--.2"/-0$$$$ $$$$a*l2'1*]$www"nm2n--.2"/-0 23

Vision Lite Low Profile 45-180 Minute Fire Rated SVL Series For use in Fire Rated door applications under positive and neutral pressure. Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), CAN/ULS104 (2010), NFPA (201) and CSI Code 0870 00 SPECIFICATIONS - Low Profile Beveled Vision Lite - 20 Gauge Cold Rolled Steel - Mitered welded corners with counter sunk mounting holes - Single side attaching with matching mounting screws included - For use with 3/16 to 1/4 glass thickness - Designed for use with 1-3/4 doors only - Baked on powder coat finish - Color: Standard Bronze - Fastener: #8 x 7/8 flathead phillips head SMS OPTIONS - Also available as a kit or bundle which comes with the Frame, Glass and Glazing Kit - Available glass types are 1/4 Tempered (TEMP), 1/4 Superlite I-W Wired Glass (WS) and 3/16 Pyran Platinum F Glass (PPF). NOTES - Order size is equal to opening size - Visible vision opening is 2 under order size - Glass size dimension is 1 under complete order size - Follow all door manufacturer s instructions for use and installation of all products. - Refer to Product No. Guide for list of fire rated sizes 24 DKS Steel Door & Frame Systems, Inc.

Vision Lite Standard Profile 45/180 Minute Fire Rated VL Series For use in Fire Rated door applications under positive and neutral pressure. Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), CAN/ULS104 (2010), NFPA (201) and CSI Code 0870 00 SPECIFICATIONS - Standard Profile Beveled Vision Lite - 20 Gauge Cold Rolled Steel - Mitered welded corners with counter sunk mounting holes - Single side attaching with matching mounting screws included - For use with 3/16 to 1/4 glass thickness - Designed for use with 1-3/4 doors only - Baked on powder coat finish - Color: Standard Bronze - Fastener: #8 x 7/8 flathead phillips head SMS OPTIONS - Also available as a kit or bundle which comes with the Frame, Glass and Glazing Kit - Available glass types are 1/4 Tempered (TEMP), 1/4 Superlite I-W Wired Glass (WS) and 3/16 Pyran Platinum F Glass (PPF). NOTES - Order size is equal to opening size - Visible vision opening is 2 under order size - Glass size dimension is 1 under complete order size - Follow all door manufacturer s instructions for use and installation of all products. - Refer to Product No. Guide for list of fire rated sizes DKS Steel Door & Frame Systems, Inc. 25

Vision Lite Standard Profile 45/180 45-180 Minute Fire Rated 10VL Series, For 1 Glass For use in Fire Rated door applications under positive and neutral pressure. Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), CAN/ULS104 (2010), NFPA (201) and CSI Code 0870 00 SPECIFICATIONS - Standard Profile Beveled Vision Lite - 20 Gauge Cold Rolled Steel - Mitered welded corners with counter sunk mounting holes - Single side attaching with matching mounting screws included - For use with 1 glass thickness - Designed for use with 1-3/4 doors only - Baked on powder coat finish - Color: Standard Bronze - Fastener: #8 x 7/8 flathead phillips head SMS NOTES - Order size is equal to opening size - Visible vision opening is 2 under order size - Glass size dimension is 1 under complete order size - Follow all door manufacturer s instructions for use and installation of all products. 26 DKS Steel Door & Frame Systems, Inc.

Divided Divided Reverse Reverse Y Y Blade Blade Louvers 90 90 Minute Fire Fire Rated YLV YLV Series For use in Fire Rated door applications under positive and neutral pressure. Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), NFPA 252(2012) and CSI Code 089000 Louvers & Vents SPECIFICATIONS - 18 Gauge Cold Rolled Steel Frame & Blades - Mitered welded corner frame construction - Divided row Y blades spaced at 1 increments with blocked vision design - Counter sunk mounting holes with screws for each side of the door - Minimum door size thickness: 1-3/8 - Baked on powder coat finish - Color: Standard Bronze - Fastener: Phillips head screws #8 x 3/4 NOTES - Order size is equal to opening size - Follow all door manufacturer s instructions for use and installation of all products. DKS Steel Door & Frame Systems, Inc. 27

Inverted Y-Blade Louvers 90 Minute Fire Rated VLV Series For use in Fire Rated door applications under positive and neutral pressure. Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), NFPA 252(2012) and CSI Code 089000 Louvers & Vents SPECIFICATIONS - 18 Gauge Cold Rolled Steel Frame & Blades - Mitered welded corner frame construction - Reverse Y blades are frame supported at 1 increments, with blocked vision design - Single side mounting for non corridor exposure with fastening screws included - Design for use with 1-3/4 doors only - Baked on powder coat finish - Color: Standard Bronze - Fastener: Phillips head screws #8 x 3/4 NOTES - Order size is equal to opening size - Follow all door manufacturer s instructions for use and installation of all products. 28 DKS Steel Door & Frame Systems, Inc.

Adjustable Adjustable Fusible Fusible Link Link Louvers 90 90 Minute Fire Rated FLLV FLLV Series Adjustable Fusible Link Louvers are recommended for use in rooms where ventilation is needed and at the same time isolating the room whenever fire is present. When louver is exposed to heat at 165 F, the fusible link trips and the spring loaded louver blades shut to form an air tight fire and smoke seal. UL (WHI Listing Mark) is stamped on the frame of the louvers with a 60-90 Minutes Fire Rating. Installation is easy. No need to drill holes for fasteners. All screws are mounted on the room side leaving the corridor side free of fasteners for security purposes. +1!!)'*%(#0 Fuses are replaceable. <#%&<.'!='(!!1',-.'!-.'*%/# DOOR ROOM SIDE 3 9 8 6 : ;!"#$%$&'(%)#$*%!$'+,-.'!-.'*%/#0 +,!11%(!1'*%(#0!1(#1'*%/#'+,-.'!-.'*%/#0'"2-*'343567? >%(.<'!='(!!1',-.'!-.'*%/# CORRIDOR SIDE 348567'(!!1 : Material: 16 Gauge CRS Frame & Louver Blades Door: for 1-3/4 Doors only Fasteners: 3 x 3/4 LG & 1 x 1/2 LG Finish: Standard Bronze Free Flow Area: 45% free Construction: - Welded & mitered corners - Ajdustable blades of 16-gauge CRS - Cadmium plated steel rivets - Cadmium plated steel tension spring - 1-9/16 deep louver assembly 1 Mounting Screws - #8 phillips head (3 x 3/4 LG & 1 x 1/2 LG) 2 Rocker Arm, Closing Bar and housing 3 S Hook -.080 Cadmium plated steel 4 Fusible link - Design temperature 165 F max 5 Heat opening - 1/2 x 1 6 Tension spring - 3 LG x 1/2 dia x.063 thick Cadmium plated steel. 7 Flat Spring Clip DKS Steel Door & Frame Systems, Inc. 29

Standard Standard and and Low Low Profile Vision Lite Kits 45-180 Minute Fire Rated SVL & VL Series GLASS SCREW! LOW PROFILE SVL VISION LITE KITS GLAZING TAPE SCREW FRAME DOOR STANDARD PROFILE VL VISION LITE KITS For use in Fire Rated door applications under positive and neutral pressure. Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), CAN/ULS104 (2010), NFPA (201) and CSI Code 0870 00 FRAME SPECIFICATIONS - Standard and Low Profile Vision Lite Kits - 20 Gauge Cold Rolled Steel - Mitered welded corners with counter sunk mounting holes - Single side attaching with matching mounting screws included - For use with 3/16 to 1/4 glass thickness - Designed for use with 1-3/4 doors only - Baked on powder coat finish - Color: Standard Bronze - Fastener: #8 x 7/8 flathead phillips head SMS NOTES - Order size is equal to opening size - Visible vision opening is 2 under order size - Glass size dimension is 1 under complete order size - Follow all door manufacturer s instructions for use and installation of all products. GLAZING TAPE - Standard 1/16 x 3/8 applied to both sides of glass GLASS OPTIONS TEMP (Tempered Glass): Heat-strengthened glass and cannot be cut after manufacturing. Fire Rating: None. Clear wire free glass recommended for non fire rated applications. Use of glazing compound or glazing tape on both sides of glass is recommended to minimize breakage. Size: Minimum 2" x 2", max sheet size: 88" x 118". WS (Superlite I-I Iired Glass): 20 ga CRS (Cold Rolled Steel) beveled vision lite, 1/4" wired glass with film. Glass is UL labeled standard. Fire Rating: 20 minutes to 90 minutes. Install in fire listed and labeled vision frames. Use of glazing compound or glazing tape on both sides of glass is recommended to minimize breakage. Size: Minimum 4" x 4", max rated size: 36" x 84". PPF ( PYRAN Platinum F Glass): Glass is UL labeled standard. Fire Rating: 20 minute to 3 hours. Install in fire listed and labeled vision frames. Use of glazing compound or glazing tape on both sides of glass is recommended to minimize breakage. Size: Minimum 4" x 6", max sheet size: 43" x 77". 30 DKS Steel Door & Frame Systems, Inc.

Glass Accessories Glass Accessories Tempered Glass Heat-treated clear safety glass that breaks into small particles Light Transmission: 86% approx Thickness: 1/4 (6 mm) Non-Fire Rated SuperLite I-W Wired Glass Embedded 3/4 x 3/4 wire mesh Light Transmission: 86% approx Thickness: 1/4 (6 mm) Annealed single glazing with safety film applied to one side 20-90 Minute Fire Rating! PYRAN Platinum F Glass Glass Ceramic Light Transmission: 80% approx Surface applied Heavy Duty Safety film Thickness: 3/16 (5 mm) 20-180 Minute Fire Rating GLASS OPTIONS SCREW TEMP 9TempereF G7aDD;8 HeaJ=DJrengJheneF g7add anf cannoj be cuj afjer manufacjurcngh @Cre RaJCng8 NoneH C7ear wcre free g7add recommenfef for non fcre rajef app7ccajcondh UDe of g7azcng compounf or g7azcng Jape on bojh DCFeD of g7add CD recommenfef Jo mcncmcze breagageh SCze8 MCnCmum 2" A 2", maa DheeJ DCze8 <<" A 11<"H GLASS WS 9Super7CJe I=I ICreF G7aDD;8 20 ga CRS 9Co7F Ro77eF SJee7; beve7ef vcdcon 7CJe, 1/4" wcref g7add wcjh fc7mh G7aDD CD UL 7abe7eF DJanFarFH @Cre RaJCng8 20 mcnujed Jo 90 mcnujedh InDJa77 Cn fcre 7CDJeF anf 7abe7eF vcdcon framedh UDe of g7azcng compounf or g7azcng Jape on bojh DCFeD of g7add CD recommenfef Jo mcncmcze breagageh SCze8 MCnCmum 4" A 4", maa rajef DCze8 :?" A <4"H FRAME DOOR GLAZING TAPE SCREW PPF 9 PYRAN P7aJCnum @ G7aDD;8 G7aDD CD UL 7abe7eF DJanFarFH @Cre RaJCng8 20 mcnuje Jo : hourdh InDJa77 Cn fcre 7CDJeF anf 7abe7eF vcdcon framedh UDe of g7azcng compounf or g7azcng Jape on bojh DCFeD of g7add CD recommenfef Jo mcncmcze breagageh SCze8 MCnCmum 4" A?", maa DheeJ DCze8 4:" A >>"H DKS Steel Door & Frame Systems, Inc. 31