CHAPTER MMA welding WELDING POWER Inverter technology COLT 90 / 0 / 0 page PUMA S 00 / S 00 / S 700 G page PUMA SX 000 / SX 700 SG / SX 00 GC page Transformer technology ARKO 0S / 0S / 8S page ARKO CU / TCU page PRATIKA 80 TS / 0 TS / 0 T / 0 T page 7 PRATIKA ACDC / ACDC page 8 Thyristor technology YARD SV / SV / SV 0 / SV page 9 YARD STC 00 page 0 Options and complements MMA kits accessories... page COATED ELECTRODES Rutile coating EASYARC - RAPIDARC- SPEEDARC - UNIVARC - TUBARC Basic coating TENSARC - RESISTARC MMA coated electrodes for stainless steel welding INOX 08 L - INOX L MMA coated electrodes for repair INOX R MMA coated electrodes for hardfacing MANGANARC 00 MMA coated electrodes for welding cast-iron CASTARC
COLT 90 / 0 / 0 The range of COLT power sources, known all around the world for its exceptional ratio weight / power, shows a new handle more ergonomic. Input voltage: 0 V single-phase with A plug. Light weight: less than kg. Simple: only regulation potentiometer. Versatile: able to weld all types of coated electrodes (steel / stainless steel / special etc ). Comfortable: over-intensity when starting / anti-stick device. Complete: delivered complete for an immediate use. Power source for MMA welding with coated electrodes. Inverter technology. Single-phase input voltage. ULTRA-MOBILE COLT 90 Cat. nr : W 000 0 9 COLT 0 Cat. nr : W 000 0 98 COLT 0 Cat. nr : W 000 0 97 EN 097- EN 097-0 Single-phase input voltage COLT 90 COLT 0 COLT 0 0 V Primary consumption* - A A A Power*. kva.8 kva.8 kva Effective consumption 7 A 0 A A No-load voltage 8 V 8 V 8 V Welding current - 80 A - A - 0 A Duty cycle at 0 % 80 A A ( %) 0 A ( %) at 0 % 0 A 80 A 8 A at 00 % 0 A 0 A 70 A Protection class IP Dimensions 0 x 0 x 0 mm Weight.9 kg.8 kg kg see page primary cable, welding cable with electrode holder, welding cable equipped with earth clamp, hammer / brush / helmet, pack of rutile electrodes, and maintenance manual, PVC case for transportation.
Power source for MMA welding with coated electrodes and TIG DC scratching. Inverter technology. Single-phase input voltage. PUMA S 00 / 00 / 700 G The PUMA are power sources for MMA coated electrodes welding for an industrial and daily use. A special version compatible with generators is available (700 G). The PUMA have been designed for on site utilisation. PUMA S 00 Cat. nr : W 000 7 Input voltage: 0 V single-phase. PUMA S 00 Light weight: less than 7 kg. Cat. nr : W 000 Simple: only regulation potentiometer. Versatile: able to weld all type of coated electrodes (steel / stainless steel etc ). Comfortable: over-intensity when starting / anti-stick device. Powerful: duty cycle at 0 C. Complete: delivered with welding cables. Transportable: with its shoulder strap. MOBILE EN 097- EN 097-0 PUMA S 700 G Power potentiometer. Switch on/off. Tension indicator. Power borders. Cat. nr : W 000 0 COMPATIBLE WITH GENERATOR PUMA S 00 PUMA S 00 PUMA S 700 G Single-phase input voltage 0 V (0-0 Hz) Primary consumption* - A A A Power*.8 kva. kva. kva Effective consumption A A 9 A No-load voltage 8 V Welding current - 0 A - 0 A - 0 A Duty cycle at 0 % 0 A 0 A 0 A at 0 % 00 A 0 A 0 A at 00 % 80 A 00 A 00 A Protection class IP Dimensions x 0 x mm Weight 7 kg see page
PUMA SX 000 PUMA SX 700 GC / SX 00 GC The PUMA SX family is specially remarkable showing greater duty cycles and new functions such as digital display, TIG LIFT mode and Arc dynamism. Moreover the PUMA G are compatible with generators. Digital display: better adjustment and reading of the parameters (Amp/ % / sec) on PUMA SX 00 G. Versatile: able to weld all types of coated electrodes (rutile, basic, etc ) including cellulosics (for GC versions). Light and compact: for quick interventions. Safety: IP protection class for outdoor interventions. Comfortable: over-intensity when starting and anti-stick device (pre-programmed on versions 700/ 000, and adjustable on 00). Power source for MMA welding with coated electrodes and TIG DC (TIG lift). Inverter technology. Single-phase or three-phase input voltage. EN 097. EN 097.0 Switch on/off. Power potentiometer. Thermics safety indicator. Selection MMA / TIG DC. PUMA SX 000 Cat. nr : W 000 8 PUMA SX 700 GC Cat. nr : W 000 PUMA SX 00 GC Cat. nr : W 000 88 TIG DC mode selection. Digital display Amp/Sec/ %. Remote control button. Welding intensity adjustment. COMPATIBLE WITH GENERATOR PUMA SX 700 GC PUMA SX 000 PUMA SX 00 GC Input voltage 0/0 Hz 0 V single-phase 00 V three-phase Primary consumption* - A A A Power*. kva kva 7. kva Effective consumption 9 A 9 A 9 A No-load voltage 08 V 8 V 0 V Welding current - 0 A - 80 A - 0 A Duty cycle at 0 % 0 A 80 A 0 A (0%) at 0 % 0 A 0 A 90 A at 00 % 00 A 0 A 0 A Protection class IP Dimensions 70 x 0 x 00 mm 0 x 70 x 0 mm Weight 8 kg kg 8 kg see page
Traditional power source for MMA welding with coated electrodes. Transformer technology. Single-phase input voltage. ARKO 0S / 0S / 8S The ARKO family includes transformer power sources regulated by shunt and delivering AC current. They are compact, robust and easy to use. Input voltage: 0 V single-phase or 0 V 00 V single-phase (8S). Simple: adjustment by shunt with visualisation of the current. Successful: ideal for craft applications. Quick: delivered ready-to-use. Safety: with the integrated thermics security. Switch on/off. Adjustment wheel. Electrode holder cable. ARKO 0S Clamp cable. Welding intensity display. Primary alimentation cable. Cat. nr : W 000 8 MOBILE ECONOMIC ARKO 0S Cat. nr : W 000 7 ARKO 8S Cat. nr : W 000 9 EN 097. EN 097.0 ARKO 0S ARKO 0S ARKO 8S Single-phase input voltage 0 V - (0 Hz) 0-00 V - (0 Hz) Primary consumption* - Power* 8 A / kva A /. kva - A /. kva Effective consumption A A - A No-load voltage V 8 V 8 V Welding current 0-0 A 0-0 A - 0 A Electrodes/ hour 0 in diam.. mm 0 in diam.. mm 0 in diam.. mm Suitable electrodes diameter.0 to. mm.0 to. mm.0 to.0 mm Protection class IP Dimensions 0 x 0 x 80 mm Weight, kg, kg kg see page welding cables equipped with earth clamp and electrode holder,
Traditional power source for MMA welding with coated electrodes. Transformer technology. Single-phase input voltage. ARKO CU / TCU The ARKO family includes transformer power sources regulated by shunt and delivering AC current. They are compact, robust and easy to use. Input voltage: 0 V 00 V single-phase. Simple: adjustment by shunt with visualisation of the current. Successful: ideal for craft applications. Quick: delivered ready-to-use. Professional: ventilated copper transformer (T). Safety: with the integrated thermics security. Switch on/off and primary tension selection. Adjustment wheel. Plug for electrode holder cable. Plug for clamp cable. Welding intensity display. Primary alimentation cable. MOBILE ECONOMIC ARKO CU EN 097. EN 097.0 Cat. nr : W 000 70 ARKO TCU Cat. nr : W 000 7 Single-phase input voltage Primary consumption* - Power* ARKO CU 0-00 V - (0 Hz) ARKO TCU 7 - A /. kva - 9 A / kva Effective consumption 0. A (00 V) 8. A (00 V) No-load voltage 8 V 8 V Welding current - A - 8 A Electrodes/ hour in diam.. mm in diam..0 mm Suitable electrodes diameter.0 to.0 mm.0 to.0 mm Protection class IP Dimensions 0 x 00 x 0 mm Weight kg kg see page
Traditional power source for MMA welding with coated electrodes. Transformer technology. Single-phase input voltage. PRATIKA 80 TS / 0 TS PRATIKA 0 T / 0 T The PRATIKA ACDC are transformer technology power sources air cooled. The welding intensity can be adjusted by shunt. They provide an AC current (T and TS ranges) for easy welding with rutile electrodes. PRATIKA is your daily welding tool. Input voltage: 0 V single-phase or 0 V 00 V single-phase 0/0 Hz. Simple : adjustment by shunt with visualisation of the current. Ready-to-use: delivered with welding accessories. Professional: robust transformer air cooled. Safety: with the integrated thermics security. PRATIKA 80 TS Cat. nr : W 000 088 TRANSFORMER EN 097. EN 097.0 PRATIKA 0 TS Cat. nr : W 000 09 PRATIKA 0 T Cat. nr : W 000 09 PRATIKA 0 T Welding intensity display. Switch on/off. Adjustment wheel. Primary cable. Cat. nr : W 000 7 PRATIKA 80 TS 0 TS 0 T 0 T Single-phase input voltage 0/0 Hz 0 V 0 V - 00 V Primary consumption* - A A A - 0 A 9 A - A Power*. kva. kva. kva. kva Effective consumption A A A (0 V) 9 A - A No-load voltage 8 V 8 V 8 V 8 V Welding current 0-0 A - 0 A - 0 A 0-9 A Electrodes diameter. to. mm. to.0 mm. to.0 mm. to.0 mm Protection class IP Dimensions (mm) 0 x 00 x 0 0 x 0 x 0 0 x 0 x 0 x 0 x Weight. kg 7 kg. kg 0 kg see page welding cables equipped with earth clamp and electrode holder (TS models), 7
Traditional power source for MMA welding with coated electrodes. Transformer technology. Single-phase input voltage. PRATIKA ACDC/ ACDC The PRATIKA ACDC are transformer technology power sources air cooled. The welding intensity can be adjusted by shunt. They provide an AC or DC current allowing welding with all types of coated electrodes. PRATIKA is your power source for all applications. Input voltage: 0 V 00 V single-phase. Simple : adjustment by shunt with visualisation of the current. Versatility: AC/DC for all types of coated electrodes. Powerful: welding current up to A. Professional: robust transformer air cooled. Safety: with the integrated thermics security. Welding intensity display. Thermics safety light. Switch on/off. Welding cables plug. Adjustment wheel. Primary cable TRANSFORMER FOR ALL TYPES OF ELECTRODES PRATIKA ACDC Cat. nr : W 000 7 PRATIKA ACDC Cat. nr : W 000 09 EN 097. EN 097.0 PRATIKA ACDC ACDC Single-phase input voltage 0/0 Hz 0 V - 00 V Primary consumption* - A - A 9 A - A Power*. kva 7 kva Effective consumption A - 7. A 0 A - A No-load voltage 9 V 9 V Welding current AC 0 A - 0 A 0 A - A DC 0 A - A A - 0 A Electrodes diameter. to mm to mm Duty cycle at 0 C at 0 % 0 A (à 8%) 0 A at 0 % 0 A 80 A Protection class IP Dimensions (mm) 0 x 00 x 0 0 X 00 x 0 Weight 7 kg. kg see page handle and wheels, 8
Power source for MMA welding with coated electrodes. Thyristor technology. Three-phase input voltage. YARD SV / SV SV 0 / SV The YARD power sources are rectifiers for MMA coated electrodes welding. They are perfectly adapted to workshop and outdoor working conditions. Easy use with adjustment by shunt, they are aimed to professional and intensive applications. Input voltage: bi-tension 0 V 00 V three-phase. Simple : power adjustment by shunt. Successful: parameterized for intensive applications. YARD SV Technology: 00% ventilated Cat. nr : W 000 9 copper transformer. YARD SV Practice: due to its large diameter wheels and its handle. Cat. nr : W 000 9 Versatile: able to weld all types of electrodes (including cellulosics). POWERFUL ROBUST YARD SV 0 Cat. nr : W 000 9 Switch on/off and primary tension selection. Power adjustment. Welding intensity indicator. Power borders. YARD SV Cat. nr : W 000 9 EN 097. EN 097.0 Input voltage YARD SV YARD SV YARD SV 0 YARD SV 0 V - 00 V three-phase (0 Hz) Primary consumption* - A - A A - A 7 A - A 78 A - A Power* 7. kva 0. kva kva 7.7 kva Effective consumption A - A A - A A - 9, A A - 0 A No-load voltage V / V V / V V / 70 V 7 V / 79 V Welding current - 0 A - 0 A 0 - A 0-00 A Duty cycleat % 0 A 0 A A 00 A at 0 % 70 A 00 A 0 A A at 00 % 0 A A 90 A A Protection class IP Dimensions (mm) 0 x 0 x 890 0 x 70 x 080 Weight 7 kg 8 kg 07 kg kg see page 9
Power source for MMA welding with coated electrodes. Thyristor technology. Three-phase input voltage. YARD STC 00 The YARD STC 00 power source is built with thyristor technology, known as robust, successful and reliable all over the world. The YARD STC 00 had already been approved in all types of environment as transport equipments manufacturing, shipyards, repair, etc The YARD STC 00 is the solution for intensive welding with coated electrodes (including cellulosic) and for gouging. Input voltage: bi-tension 0 V 00 V three-phase. Intensity adjustment: electronic. Display: digital A / V. Versatility: coated electrodes / TIG DC / gouging. Flexible: possibility to adjust Hot Start and arc dynamism. Professional: steel structure equipped with wheels, retractable crutch and slinging eyes. Remote control: remote adjustment flexibility. EXTENSIVE VERSATILE (coated electrode / gouging / TIG DC) YARD STC 00 Cat. nr : W 000 7 EN 097- Switch on/off and primary tension selection. Regulation potentiometer. Digital display A/V. Selection coated electrode / TIG. Hot Start / XXXX adjustment. Remote control connection. YARD STC 00 Three-phase input voltage 0-00 V (0-0 Hz) Primary consumption* - Power* 0 - A / kva No-load voltage 80 V Welding current 0-00 A Duty cycle at % 00 A at 0 % 00 A at 00 % 0 A Electrodes diameter. to. mm Protection class IP Dimensions 970 x 70 x 70 mm Weight 0 kg see page Remote control box Cat. nr : W 000 9 7 0
Options and commplements for MMA power sources. MMA OPTIONS MMA KIT ACCESSORIES: COMPLETE ACCESSORIES KIT FOR CHANGE OR FIRST ASSEMBLY C C+ 0C0 0C0+ COLT W 000 0 80 - - - PUMA 0/0 - W 000 0 8 - - PUMA 90/0 - W 000 0 8 - - ARKO W 000 0 80 - - - PRATIKA - W 000 0 8 - - YARD SV - - W 000 0 8 - YARD STC - - - W 000 0 8 MMA OPTIONS: COLT PUMA PUMA SX YARD STC Remote control - - W 000 09 W 000 7 TIG torch with valve W 000 9 W 000 9 W 000 9 - COATED ELECTRODES (SELECTION) : Complete range on pages to OPTIONS AND COMPLEMENTS FOR. Rutile Basic Stainless steel Cast iron RAPIDARC TENSARC INOXARC CASTARC Diameter.0 mm W 000 9 W 000 80 W 000 70 W 000 77 Diameter. mm W 000 97 W 000 8 W 000 7 W 000 78 Diameter. mm W 000 98 W 000 8 W 000 7 W 000 79 Diameter.0 mm W 000 99 W 000 8 - -