Kestrel Aluminium Systems Limited. Product Manual Section 22 TB Commercial Door. Manual Version

Kestrel Aluminium Systems Limited Product Manual Section 22 TB Commercial Door Manual Version 23.0.1 PAS24: 2012

Section 22.01 Product Specification 22.01.01 sheet 1 Product specification 22.01.01 sheet 2 Product specification Therm software images 22.01.01 sheet 3 Product specification Therm software images 22.01.01 sheet 4 Product specification Therm software images PAS24: 2012 - Section 22 Contents Section 22.02 Section ID 22.02.01 sheet 1 Section ID KAS751 22.02.02 sheet 1 Section ID KAS752, KAS753 22.02.03 sheet 1 Section ID KAS754, KAS755 22.02.04 sheet 1 Section ID KAS762, KAS763 22.02.05 sheet 1 Section ID KAS764 22.02.06 sheet 1 Section ID KAS756, KAS757, KAS589 (Ex KAS767), KAS766 and KAS631 22.02.07 sheet 1 Section ID KAS758, KAS759, KAS760 and KAS761 22.02.08 sheet 1 Section ID KAS765, KAS768 and KAS769 22.02.09 sheet 1 Section ID KAS282, KAS467 and beads KAS631, 632, 633, 634, 635 and KAS636 22.02.10 sheet 1 Section ID KAS772, KAS773 and KAS774 (Upvc profiles) 22.02.11 sheet 1 Section ID Gaskets KAS471, 472, 473, 476, 477, 478 and KAS479 22.02.12 sheet 1 Section ID KAS480, 480A, 481, 481A, 482, 482A, 583, 480.14B, 480.13B, 482.9B Section 22.03 Parts ID 22.03.01 sheet 1 Parts ID KAS591-762 for use with KAS762 and KAS764 22.03.02 sheet 1 Parts ID KAS591-763 for use with KAS763 22.03.03 sheet 1 Parts ID KAS593-A and KAS593-P 22.03.04 sheet 1 Parts ID KAS490.T01, 490.T02, 490.T03, 490.T04, 490.T05 and KAS490.T06 22.03.05 sheet 1 Parts ID COC ID KAS572 22.03.06 sheet 1 Parts ID COC ID KAS561.E End load arm 22.03.07 sheet 1 Parts ID COC bottom pivot set and KAS537-SBKP 22.03.08 sheet 1 Parts ID KAS448-01 and KAS447-B 22.03.09 sheet 1 Parts ID KAS528t-T1, KAS448-08, KAS593-S 22.03.10 sheet 1 Parts ID KAS447-G, KAS447-K 22.03.11 sheet 1 Parts ID KAS448-04, KAS448-05 22.03.12 sheet 1 Parts ID KAS448-02, KAS448-06 and KAS448-07 22.03.13 sheet 1 Parts ID KAS447-E 22.03.14 sheet 1 Parts ID KAS537-SBKP 22.03.15 sheet 1 Parts ID KAS449-3 cylinder variants 22.03.16 sheet 1 Parts ID KAS520 and KAS519 escutcheons 22.03.17 sheet 1 Parts ID KAS582-FG and KAS582-STD end plugs Section 22.04 Parts ID Glazing gaskets 22.04.01 sheet 1 Parts ID Glazing thickness table part 1 22.04.02 sheet 1 Parts ID Glazing thickness table part 2 Section 22.05 Parts ID screws 22.05.01 sheet 1 Parts ID KAS494 screw variants for polyamide material 22.01.00 Sheet 1 01.11.14

PAS24: 2012 - Section 22 Contents Section 22.06 Typical details Vertical sections 22.06.01 sheet 1 Typical door header bar and glazed fanlight at COC 22.06.02 sheet 1 Typical intermediate door rail 22.06.03 sheet 1 Typical door bottom rail and threshold 22.06.04 sheet 1 Typical door header bar and glazed fanlight Section 22.07 Typical details Horizontal sections 22.07.01 sheet 1 Typical door hinge mullion Finger guard 22.07.02 sheet 1 Typical door hinge mullion Finger guard. Elevation at top of door rail KAS762 22.07.03 sheet 1 Typical door hinge mullion Finger guard. Elevation at bottom of door rail KAS763 22.07.04 sheet 1 Typical door locking mullion Single door 22.07.05 sheet 1 Typical door meeting stiles Double door Section 22.08 Typical details Horizontal sections 22.08.01 sheet 1 Threshold and glazing options 22.01.00 Sheet 2 01.11.14

Kestrel Aluminium Systems TB Commercial Pivot Doors - Product Specification - PAS24: 2012 TB COMMERCIAL PIVOT DOORS: TB Commercial Pivot Doors are designed for use as stand alone units or use in conjunction with the Thermal Framing System. Doors are pivoted with a finger guard hinge jamb only, and are suitable for all high traffic areas. The twin brush seal, woolpile weatherstripping together with an co-ordinated suite of profiles, covers the majority of entrance door requirements. Materials: Aluminium profiles are extruded from alloy 6060/6063 T6 complying with the recommendations of BS EN 12020-2: 2008 Finishes: Mill finish Etched and anodised to BS 3987: 1991 (01.06.2007) - Silver AA25 or colours on request. Polyester Powder coat paint to BS EN 12206-1:2004. See separate list for standard colour range available. Construction: Concealed extruded aluminium mechanical corner jointing cleats and midrail brackets are used. Hardware: Door hardware is available to construct pivot doors with finger-guard door jamb stiles only. Double and single door sets have passed the requirements of PAS24: 2012 with specialist lock/lock cylinders Kestrel Aluminium Systems Limited PAS24: 2012 Specification Maximum door leaf size = 1100mm w x 2400mm h Single Door: KAS448 AR Sentinel M - 30mm backset, KAS449 AR 3 Star 90mm profile cylinder KAS572 COC Double Door: KAS448 AR Sentinel M - 30mm backset, KAS449 AR 3 Star 90mm profile cylinder KAS447 AR cylinder operated shootbolt KAS572 COC Installed with bespoke accessories and fixings strictly inaccordance with manual instructions Glass, Glazing and Infil Panels: Doors to be fitted with external KAS769 vertical glazing rebate bead, external horizontal glazing rebate is integral to the door rail. Clip fit glazing beads are fitted internally. The system is designed to accept glazing of 28mm to 46mm thickness (insulating glass units or panels). Glazing to be carried out in strict accordance with BS 6262 and BS 6206 with particular attention being taken to risk areas, which would require safety glass. The system will also accommodate solid panels to customers own specification and supply. 22.01.01 Sheet 1 02.04.14

Typical header bar detail Therm Version 5.2.14 Thermal Performance Therm Software images Typical threshold detail Therm Version 5.2.14 22.01.01 Sheet 2 02.04.14

Thermal Performance Therm Software images Typical FG hinge jamb detail Therm Version 5.2.14 Typical locking jamb detail Therm Version 5.2.14 22.01.01 Sheet 3 02.04.14

Thermal Performance Therm Software images Typical intermediate rail detail Therm Version 5.2.14 Thermal data for frame elements (Uf) is independently validated by UKAS accredited testing facility. Psi (Ψ) and IGU Centre pane U-Value (Ug) data is provided by manufactures of insulated glass units (this data should also be validated in accordance with the relevant BS EN product standards by an accredited body) so overall U-Value to be calculated to the standard models for single and double doors as defined in BS EN 14351:2006. Resulting values can then be used on the relevant product DOP and CE Marking information. NB Psi and Ug performance data will vary according to the IGU inner and outer glass specification, cavity filling with air or gasses and edge spacer chosen, so ensure your calculation data accurately reflects the IGU products being used. Kestrel Aluminium Systems Limited is not responsible for the calculation of Psi and Ug data. 22.01.01 Sheet 4 02.04.14

KAS751 Safety stile frame. 72 32 22.02.01

60 KAS752 Safety stile. 83 70.5 60 KAS753 Flat safety stile. 77.25 70.5 22.02.02

60 KAS754 Lock stile. 71.5 70.5 60 KAS755 Slave stile. 71.5 70.5 22.02.03

KAS762 Top rail. 85 120 70 100 65 KAS763 Bottom rail. 1No KASP994 inverted to give clearance. 22.02.04

70 KAS764 Intermediate rail. 140 100 22.02.05

KAS766 Header rebate bead. 4 23.5 KAS631 56 20 100 20 KAS756 Door header bar. KAS767 Plain header plate sold as a component part KAS589 KAS757 Thermally broken header plate. 97 22.02.06

100 KAS758 Ramp threshold. 15 100 KAS759 Square back threshold. 15 100 KAS760 Square threshold. KAS761 Extended square threshold. 15 15 115 22.02.07

60 KAS765 CVR stile. 71.5 70.5 KAS768 Vertical rebate bead. 20 KAS769 Security vertical rebate bead. 4 4 20 22.02.08

7 7 KAS282 Standard 7mm external gasket KAS467 Standard 7mm internal gasket 23.5 23.5 KAS631 KAS632 17.5 20 KAS633 20 17.5 20 20 13.5 13.5 20 20 KAS634 KAS635 KAS636 22.02.09

Black rigid upvc profiles. KAS772 Brush carrier. KAS773 Lock stile trim. KAS774 Slave stile trim. 22.02.10

NB - Due to extrusion and glass build up tolerances, as well as unit specification not being a standard 28mm thickness, other thicknesses can be accommodated by using alternative beads and the gaskets detailed below. Also, it may be prudent to take alternative gaskets to site to avoid glazing delays for the reasons already stated. KAS471 Alternative 5mm external gasket. KAS476 Alternative 5mm internal gasket. KAS472 Alternative 4mm external gasket. KAS477 Alternative 4mm internal gasket. KAS473 Alternative 3mm external gasket. KAS478 Alternative 3mm internal gasket. KAS479 Alternative 2mm internal gasket. 22.02.11

Standard grey premier density woolpile - No weather fin KAS480 Base - 6.7mm Pile - 9mm KAS480A Base - 6.7mm Pile - 12mm KAS481 Base - 11mm Pile - 9mm KAS481A Base - 11mm Pile - 13mm KAS482 Base - 4.8mm Pile - 6mm KAS482A Base - 4.8mm Pile - 9mm KAS583 13mm Brush Alternative black woolpile with weather fin KAS480.14B - 6.7mm base, 14mm pile BLACK - Woolpile with weather fin KAS480.13B - 6.7mm base, 13mm pile BLACK - Woolpile with weather fin KAS482.9B - 4.8mm base, 9mm pile BLACK - Woolpile with weather fin 22.02.12

Rail cleats fabricated from KAS591-SL. KAS495-D16 KAS495-F16 KAS591-762 Top rail cleat. 4No Required per rail. 2No KAS495-F16 & 1No KAS495-D16 per cleat. 29.5 29.5 Top rail is KAS762. KAS591-762 Intermediate rail cleat. 8No Required per rail. 1No KAS495-F16 & 1No KAS495-D16 per cleat. Intermediate rail is KAS764. 22.03.01

Rail cleats fabricated from KAS591-SL. KAS495-D16 KAS495-F16 KAS591-763 Bottom rail cleat. 4No Required per rail. 2No KAS495-F16 & 2No KAS495-D16 per cleat. 58.5 Bottom rail is KAS763. 22.03.02

Carrier fabricated from KAS593-SL 58 233 126 KAS593-P Pivot plate installed within KAS763 rail using 4No M6x15 Rd Hd A2 St St machine screws. Fabricator supply. KAS593-A COC top arm carrier plate installed within KAS762 rail using 6No M5x12 Rd Hd A2 St St machine screws. Fabricator supply. Scale 1:2 22.03.03

KAS490.T01 Flat safety stile sealing block 10mm thick. KAS490.T03 Safety stile sealing block 10mm thick. KAS490.T05 Small pocket sealing block 14mm thick. KAS490.T06 Large pocket sealing block 14mm thick. KAS490.T02 Radiused pocket sealing block 14mm thick. KAS490.T04 Square pocket sealing block 14mm thick. 22.03.04

90 HO 35 2506 Closer Identification Numbers Date of Manufacture 25 = Size 2 Non-Hold Open 35 = Size 3 Non-Hold Open 45 = Size 4 Non-Hold Open 26 = Size 2 Hold Open 36 = Size 3 Hold Open 46 = Size 4 Hold Open e.g. 2506 = Week 25 Year 2006 KAS No. Size Function Arm KAS572.2HE 2 HO End Load KAS572.2NE 2 NHO End Load KAS572 KAS572.3HE 3 HO End Load Transom Closer KAS572.3NE 3 NHO End Load KAS572.4HE 4 HO End Load KAS572 Dummy Closer KAS572.4NE KAS572.DE 4 NHO End Load - DUMMY End Load Spring strength 2 3 Maximum door width 850mm 950mm Maximum door height 2500mm 2500mm Maximum door weight 40Kg 60Kg Note: If either the width or weight criteria are exceeded then the next size up should be used. Do not exceed any of the maximum limits set! 4 1100mm 2500mm 80Kg Scale NA 22.03.05

KAS No. KAS561.E Description End Load Arm (Finger guard door jamb) End Load Drive Arm NB End load top arm typically supplied as part of KAS573 code. Order KAS561.E as repair or replacement part only. Scale NA 22.03.06

Bottom pivot shoe supplied as part of a concealed overhead closure kit by Kestrel. Bottom pivot post supplied as part of a concealed overhead closure kit by Kestrel. KAS537-SBKP 2mm Satin stainless steel. (detailed elsewhere) 22.03.07

KAS448-01 Multi-point deadlock. KAS447-B Concealed flush bolts. Scale 1:8 22.03.08

KAS528T.T1 Multi-point lock tab, 9No per lock. Stainless steel. KAS448-08 Multi-point lock tab shim, 9No per lock. Aluminium mill finish. KAS593-S Additional pivot support. 1No per pivot. Aluminium mill finish. 22.03.09

PAS24 Shoot bolt guide, KAS447-G, formed in Nylon 66, black. PAS24 Shoot bolt keep, KAS447-K, formed in Nylon 66, white. 22.03.10

PAS24 Shallow pocket lock keep, KAS448-04, formed in 2.5mm 304 St St, satin finish. PAS24 Deep pocket lock keep, KAS448-05, formed in 2.5mm 304 St St, satin finish. 22.03.11

PAS24 Lock stile keep, KAS448-02, formed in 3mm 304 Stainless steel, satin finish. PAS24 Lock stile keep, KAS448-03, formed in 5mm 304 Stainless steel, satin finish. PAS24 Lock stile keep packing shim, KAS448-06, formed in 1mm aluminium, mill finish. PAS24 Lock stile packing shim, KAS448-07, formed in 2mm aluminium, mill finish. 22.03.12

PAS24 Shoot bolt escutcheon, KAS447-E, formed in 1.5mm 304 stainless steel sheet, satin finished. 22.03.13

Shoot bolt keep KAS537-SBKP 2mm Satin stainless steel. Note: This item doubles up as a load spreader washer to the bottom pivot and threshold junction with the same KAS reference. In both locations the washer is retained by 2No M5x15 Csk Hd A2 St St machine screws. 22.03.14

Double key cylinder 90 45 45 KAS449-CP Key differs cylinder (KD) KAS449-CP-AKA All keyed alike cylinders (AKA) KAS449-CP-KA2 2No Keyed alike cylinders (KA2) Single key & thumb turn cylinder 90 45 45 KAS449-CT Key differs cylinder (KD) KAS449-CT-AKA All keyed alike cylinders (AKA) KAS449-CT-KA2 2No Keyed alike cylinders (KA2) Single key cylinder 55 10 45 KAS449-HCP Key differs cylinder (KD) KAS449-HCP-AKA All keyed alike cylinders (AKA) KAS449-HCP-KA2 2No Keyed alike cylinders (KA2) 22.03.15

Screw on escutcheon KAS520.M Mill finish escutcheon KAS520.NA Natural anodised escutcheon KAS520.W PPC white escutcheon KAS520.B PPC black escutcheon Escutcheon fixed with 2No M5x12 Csk Hd machine screws. Fabricator supply. Self adhesive escutcheon KAS519.SA Natural anodised escutcheon 22.03.16

KAS582-FG Safety stile end plugs. (Sold as pairs) KAS582-STD Slave stile end plug. (Sold individually) 22.03.17

NB - Due to extrusion and glass build up tolerances, as well as unit specification not being a standard 28mm thickness, other thicknesses can be accommodated by using alternative beads and the gaskets detailed below. Also, it may be prudent to take alternative gaskets to site to avoid glazing delays for the reasons already stated. 42 KAS631 KAS632 Internal gasket. KAS467 7mm thick KAS476 5mm thick KAS477 4mm thick KAS478 3mm thick KAS479 2mm thick KAS282 7mm thick 28 mm 30 mm 31 mm 32 mm 33 mm External gasket. KAS471 5mm thick 30 mm 32 mm 33 mm 34 mm 35 mm KAS473 3mm thick 32 mm 34 mm 35 mm 36 mm 37 mm 48 KAS633 KAS634 Internal gasket. KAS467 7mm thick KAS476 5mm thick KAS477 4mm thick KAS478 3mm thick KAS479 2mm thick KAS282 7mm thick 34 mm 36 mm 37 mm 38 mm 39 mm External gasket. KAS471 5mm thick 36 mm 38 mm 39 mm 40 mm 41 mm KAS473 3mm thick 38 mm 40 mm 41 mm 42 mm 43 mm Scale NA 22.04.01

NB - Due to extrusion and glass build up tolerances, as well as unit specification not being a standard 28mm thickness, other thicknesses can be accommodated by using alternative beads and the gaskets detailed below. Also, it may be prudent to take alternative gaskets to site to avoid glazing delays for the reasons already stated. 52 KAS635 KAS636 Internal gasket. KAS467 7mm thick KAS476 5mm thick KAS477 4mm thick KAS478 3mm thick KAS479 2mm thick KAS282 7mm thick 38 mm 40 mm 41 mm 42 mm 43 mm External gasket. KAS471 5mm thick 40 mm 42 mm 43 mm 44 mm 45 mm KAS473 3mm thick 42 mm 44 mm 45 mm 46 mm 47 mm Scale NA 22.04.02

KAS494.16 Polyamide screws. KAS494.31 Polyamide screws. KAS494.45 Polyamide screws. 22.05.01

Vertical section through door head and closure rail. Glazed fanlight. KAS471 KAS476 KAS631 14 20 65 20 4 8 KAS766 KAS766 KAS756 KAS494.16 56 Door header bar housing concealed overhead closure, complete with 18mm spindle. KAS219 Weather bar to run full width of header bar and both vertical outer frame bars for maximum protection. KAS219 KAS589 KAS593-A Top pivot arm and bracketry fixed to fixing plate within head cavity of door rail. 85 KAS762 KAS762 KAS282 KAS467 KAS631 Line of vertical frame behind. 4 7 28 7 23.5 Line of vertical frame behind. KAS721 KAS751 70 22.06.01 Sheet 1 02.04.14

Vertical section through intermediate door rail. Line of vertical frame behind. 7 7 4 28 23.5 KAS282 KAS467 KAS631 14 Line of vertical frame behind. 20 14 20 KAS494.16 140 KAS764 100 KAS494.45 KAS631 KAS282 KAS467 KAS631 Bead to the underside of the intermediate rail to be secured with KAS494.45 screws at nominal 150mm centres, set out from the centre of the bead. 22.06.02

Vertical section through door bottom rail and threshold. Line of vertical frame behind. 4 7 28 7 23.5 Line of vertical frame behind. KAS721 KAS751 KAS631 14 20 KAS282 KAS467 KAS494.16 120 KAS763 KAS763 KAS494.16 96 KAS772 KAS593-P KAS593-P fitted into bottom rail and secured using 4No M6x12 round head machine screws. Bottom pivot secured to carrier plate using standard closure fixing kit screws. Pivot being bonded into profiles with epoxy cement once final position has been set. Door stile cut 4mm short of underside of door bottom rail to take PVC end plug to allow woolpile to run full width. Stile end plug 20 4 7 KAS482A KAS537-SBKP 7 Woolpile running full width of door leaf. 15 Drained threshold KAS758 Drainage slot FFL 22.06.03

Vertical section through door head rail. KAS471 KAS476 KAS631 56 14 20 65 4 20 8 KAS766 KAS756 KAS494.16 Head shoot bolt secured into Nylon 66 keep. Keep block secured into aluminium profile with 4No M5x20 Csk Hd machine screws. Snap in cover plate secured to keep block with 2No M5x20 Csk Hd machine screws. Shoot bolt escutcheon secured to cover plate with 2No M5x20 Csk Hd machine screws. KAS219 KAS757 22.5 85 KAS762 KAS631 KAS282 KAS467 Line of vertical frame behind. 4 7 28 7 23.5 Line of vertical frame behind. 22.06.04

Horizontal section through anti-finger trap door stile. Glazed sidescreen. KAS727 Outer vertical frame. Anti-finger trap profile. KAS480A KAS752 Anti-finger trap single action, open out, stile shown (KAS753) with double action stile (KAS752) shown dashed. KAS631 Door leaf. Line of threshold below. KAS476 KAS467 KAS471 KAS753 KAS727 KAS721 KAS751 KAS480A KAS769 KAS282 Line of threshold below. 10 14 55 70 20 20 165 22.07.01

Horizontal section showing layout to the top of the door leaf. Glazed sidescreen. KAS727 Outer vertical frame. Anti-finger trap profile. KAS480A KAS752 Anti-finger trap single action, open out, stile shown (KAS753) with double action stile (KAS752) shown dashed. Door leaf. Line of threshold below. KAS476 KAS471 KAS727 KAS721 KAS751 KAS480A Top pivot arm and bracketry fixed to fixing plate within head cavity of door rail. KAS593-A Drainage hole Line of threshold below. 10 55 70 20 Overall door rail width 22.07.02

Horizontal section showing layout to the underside of the door leaf. Glazed sidescreen. KAS727 Outer vertical frame. Anti-finger trap profile. KAS480A KAS593-P fitted into bottom rail and secured using 4No M6x12 round head machine screws. Bottom pivot secured to carrier plate using standard closure fixing kit screws. Pivot being bonded into profiles with epoxy cement once final position has been set. 11mm Drainage hole drilled through bottom rail holes to ensure continuity of drainage detail. Line of header bar above. KAS471 KAS476 KAS751 KAS480A KAS593-P KAS772 KAS727 KAS721 KAS752 Anti-finger trap single action, open out, stile shown (KAS753) with double action stile (KAS752) shown dashed. Line of header bar above. 10 55 70 20 Overall door rail width 22.07.03

Horizontal section through lock style, single door. Handles omitted for detail clarity. 20 60 Line of threshold below. Pocket keep secured into the frame using 6No M5x12 Rd Hd machine screws. Line of horizontal frame below. Door leaf. KAS631 KAS754 KAS520 KAS480A KAS727 Glazed sidescreen. KAS467 KAS282 90mm Adams Rite 3 star Euro profile cylinder KAS728 KAS476 KAS471 Line of threshold below. KAS769 KAS520 KAS480A KAS727 KAS721 Line of horizontal frame below. 14 28 5 20 60 55 140 22.07.04

Horizontal section through meeting stiles, double door. Line of threshold below. Handles omitted for detail clarity. Important note. Lock keeps to be packed with keep spacers to ensure a constant 4mm clearance between lock faceplate and keeps. 34 Master door leaf. KAS520 KAS480A KAS520 Slave door leaf. KAS631 KAS754 KAS755 KAS631 KAS467 KAS282 90mm Adams Rite 3 star Euro profile cylinder KAS467 KAS282 KAS769 KAS480A KAS769 Line of threshold below. KAS520 Lock tab spacer secured through lock tab into the door stile using KAS494.16 screws. Lock secured to lock tabs with M5x12 Csk Hd machine screws. 14 28 5 14 Lock keep and spacer secured into door stile using M5x12 Csk Hd machine screws. 20 60 60 20 165 KAS60 Applied rebate profile can be fitted to improve weathering on a single action double door set. KAS60 22.07.05 Sheet 1 02.04.14

Threshold and glazing options. KAS494.16 KAS593-P KAS772 Regardless of threshold type they are all drained in the same manner. 30x6 slots draining both inner and outer drainage channel at both ends with only the outer drainage channel drained at all intermediate locations. All intermediate locations should be placed symmetrically about the center of the door and at maximum 600mm Ctrs. KAS282 KAS467 KAS631 Glazing option: 28mm glazing - KAS631 or KAS632 beads together with KAS282 & KAS467 gaskets. Overall size and weight limits must not be exceeded. KAS632 20 KAS537-SBKP KAS759 KAS494.16 KAS494.16 KAS593-P KAS282 KAS467 KAS633 Glazing option: 34mm glazing - KAS633 or KAS634 beads together with KAS282 & KAS467 gaskets. Overall size and weight limits must not be exceeded. KAS634 KAS772 20 KAS537-SBKP KAS760 KAS494.16 KAS494.16 KAS593-P Alternative brush piles. KAS772 KAS282 KAS467 KAS635 Glazing option: 38mm glazing - KAS635 or KAS636 beads together with KAS282 & KAS467 gaskets. Overall size and weight limits must not be exceeded. KAS636 KAS772 20 KAS537-SBKP 13 KAS583 KAS761 KAS19 Square back thresholds can be coupled with other Kestrel thresholds to provide extended threshold details if required. KAS494.16 22.08.01 Sheet 1 02.04.14