System : Asia Module : Microreactors Version :.0 Date : 7 th February 0 Created/ Revised by : Maxime Drobot Asia Microreactors Datasheet This document provides specifications and information for Syrris Asia Microreactors.. Description The Microreactor Chips are glass microfluidic devices designed for mixing and reaction of two or three liquid reagent streams. The main application is solution phase chemistry experiments including compound synthesis and reaction kinetics studies. The s are supplied in a holder. A header is also available (part number 0047) allowing quick connection to /6 fluid pipes. Left: 50 μl and 6.5 μl Microreactor Chips without holder Bottom right: Microreactor Chip in holder and Chip Header Benefits Rapid mixing across a range of flow rates High visibility (excellent access for optics) or 3 inputs Quick connect/disconnect Wide temperature and pressure range Excellent chemical compatibility. Technical information for Asia Glass and Quartz Microreactors a. General specification Specification Value Number of inputs - 3 Number of outputs 3 Reaction volume 6.5 μl, 50 μl, 000 μl 4 Outside diameter of connection tubing.6 mm (/6 inch) 5 Inside diameter of connection tubing 0.5 mm 6 Connection tubing material PTFE, FEP Page of 5
7 Surface roughness of channels (R a) 5 nm 8 Chip size 90 mm x 8 mm 9 Chip thickness 4.5 mm 0 Max operating temperature 50 C Material Glass Fabrication process HF etching and thermal bonding b. Performance and geometry information Specification Value Chip type 6.5 μl Reaction 50 μl Reaction 000 μl Reaction Operating pressure 30 Bar 30 Bar 0 Bar 3 Back pressure with 00 l/min flow 4 Bar 0.5 Bar 0.03 Bar (water) 4 Preheating of reagents prior to No No No mixing 5 Channel Crosssection N/A 6 depth 7 width 8 length 9 depth 0 width length 85 μm 50 μm N/A 0 μm 300 μm N/A 53 mm 53 mm 536 mm 85 μm 50 μm N/A 370 μm 400 μm N/A 9 mm 509 mm 844 mm c. Custom options The microreactor s may be customised in the following ways: The s can be made in quartz to improve UV light transmission Hydrophobic surface coatings can be applied to the inside surface of the channels Metals layers may be deposited on the inside surface of the channels, examples include platinum and gold layers Page of 5
Microreactor Chip with platinum layer on channel surface Custom design can be provided to fulfill specific customer need (different channel diameter, different fluidic path, etc ). Email info@syrris.com to discuss. 3. Layout details a. Channel layout for 6.5 μl and 50 μl -Input Reaction s Double T mixing junction Double T mixing junction Page 3 of 5
b. Channel layout for 6.5 μl and 50 μl 3-Input Reaction s Double T mixing junction Fluid input 3 Double-T mixing junction 3 c. Channel layout for 000 μl -Input Reaction s T mixing junction Page 4 of 5
d. Channel layout for 000 μl 3-Input Reaction s T mixing junction Fluid input 3 4. List of part numbers Part description Syrris part number Asia 6.5 μl Glass Microreactor Chip Input 004 Asia 6.5 μl Glass Microreactor Chip 3 Input 004 Asia 50 μl Glass Microreactor Chip Input 0043 Asia 50 μl Glass Microreactor Chip 3 Input 0044 Asia 000 μl Glass Microreactor Chip Input 0045 Asia 000 μl Glass Microreactor Chip 3 Input 0046 Asia 6.5 μl Quartz Microreactor Chip Input RD00457 Asia 6.5 μl Quartz Microreactor Chip 3 Input RD00458 Asia 50 μl Quartz Microreactor Chip Input RD00459 Asia 50 μl Quartz Microreactor Chip 3 Input RD00460 Chip Header 0047 Chip Header FFKM Seals (Pack of 0) 07 Chip Header Blanking Plug 000 If you require assistance or further explanation, please contact support@syrris.com. Page 5 of 5