DATA SHEET: Right Angle DomiLED TM AlInGaP : DSx-xSS DomiLED TM Synonymous with function and performance, the DomiLED TM series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. Features: > High brightness surface mount LED. > Designed for sideway illumination. > viewing angle. > Small package outline. > Qualified according to JEDEC moisture sensitivity Level. > Compatible to IR reflow soldering. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Consumer Appliances: LCD illumination as in PDAs, LCD TV. > Display: full color display video notice board. > Industry: white goods (eg: Oven, microwave, etc.). 005 DomiLED is a trademark of. All rights reserved. Product specifications are subject to change without notice. 1
Optical Characteristics at Tj=5 C Part Ordering Number Color Viewing Angle Luminous Intensity @ IF = 0mA IV (mcd) Min. Typ. Max. DSS-SSS-PQ-1 Super red, 63nm 45.0 DSS-CSS-PQ-1 Super red, 63nm 45.0 DSR-CSS-PQ-1 Red, 65nm 45.0 DSR-CSS-QR-1 Red, 65nm DSR-CSS-RS-1 Red, 65nm DSR-CSS-ST-1 Red, 65nm 450.0 DSR-SSS-QR-1 Red, 65nm DSR-TSS-ST-1 Red, 65nm 450.0 DSA-CSS-QR-1 Amber, 615nm DSA-SSS-RS-1 Amber, 615nm DSA-CSS-RS-1 Amber, 615nm DSO-CSS-QR-1 Orange, 605nm DSO-SSS-RS-1 Orange, 605nm DSO-CSS-RS-1 Orange, 605nm DSY-CSS-QR-1 Yellow, 587nm DSY-CSS-RS-1 Yellow, 587nm DSY-SSS-RS-1 Yellow, 587nm DSG-SSS-PQ-1 Green, 570nm 45.0 DSG-CSS-PQ-1 Green, 570nm 45.0 DSG-CSS-QR-1 Green, 570nm DSP-SSS-LM-1 Pure Green, 560nm 11. 18.0 8.5 Not for new design NOTE 1. All part number above comes in a quantity of 500 units per reel.. Other luminous intensity groups are also available upon request. 3. Luminous intensity is measured with an accuracy of ± 11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 5. An optional Vf binning is also available upon request. Binning scheme is as per following table. Please contact marketing for special part number
Electrical Characteristics at Tj=5 C Part Number Min. (V) Vf @ If = 0mA Typ. (V) Max. (V) Vr @ Ir = 10uA Min. (V) DSR-CSS, DSA-CSS, DSS-CSS, DSG-CSS DSO-CSS, DSY-CSS 1.6 1.9.3 1 DSS-SSS, DSR-SSS, DSA-SSS, DSO-SSS, DSY-SSS, DSG-SSS, DSP-SSS 1.6 1.8.3 1 DSR-TSS 1.6.1.6 1 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings DC forward current Maximum Value 0 Unit ma Peak pulse current; (tp 10µs, Duty cycle = 0.005) 00 ma Reverse voltage 1 V ESD threshold (HBM) kv LED junction temperature 15 C Operating temperature -40 +100 C Storage temperature -40 +100 C Power dissipation (at room temperature) 50 mw Thermal resistance - Junction / ambient, R th JA - Junction / solder point, R th JS (Mounting on FR4 PCB, pad size >= 5 mm per pad) 630 350 K/W K/W 3
Characteristics Symbol Part Number Value Unit Temperature coefficient of dom (typ) I F = 0mA; 0 C <= T <= 100 C TC dom (typ) DSS-CSS DSR-CSS DSA-CSS DSO-CSS DSY-CSS DSG-CSS DSR-TSS DSP-SSS 0.01 0.03 0.05 0.04 0.09 0.10 0.0 0.10 nm / K Temperature coefficient of V F (typ) I F = 0mA; 0 C <= T <= 100 C TC V DSS-CSS DSR-CSS DSA-CSS DSO-CSS DSY-CSS DSG-CSS DSR-TSS DSP-SSS -.3-4.3-3. -1.6-3.3-0. -.0-0. mv / K Temperature coefficient of I V (typ) I F = 0mA; 0 C <= T <= 100 C TC IV DSS-CSS DSR-CSS DSA-CSS DSO-CSS DSY-CSS DSG-CSS DSR-TSS DSP-SSS -0.5-0.59-0.60-0.6-1.05-1.0-0.6-1.17 % / K 4
Wavelength Grouping at Tj=5 C Color Group Wavelength distribution (nm) DSS; Super red 65-640 DSR-CS, -SS; Red (AS) DSR-TS; Red (TS) 60-630 60-635 DSA; Amber W X 610-61 610-615 615-61 DSO; Orange W X Y Z 600-61 600-603 603-606 606-609 609-61 DSY; Yellow W X Y Z 58-594 58-585 585-588 588-591 591-594 DSG; Green W X Y Z 564.5-576.5 564.5-567.5 567.5-570.5 570.5-573.5 573.5-576.5 DSP; Pure Green W X Y Z 55.5-564.5 55.5-555.5 555.5-558.5 558.5-561.5 561.5-564.5 Dominant wavelength is measured with an accuracy of ± 1 nm. 5
Luminous Intensity Group at Tj=5 C Brightness Group L1 L M1 M P1 P Q1 Q R1 R S1 S T1 T Luminous intensity is measured with an accuracy of ± 11%. Luminous Intensity IV (mcd) 11...14.0 14.0...18.0 18.0...4.4...8.5 45.0...56.0 56.0......90.0 90.0......140.0 140.0......4.0 4.0......355.0 355.0...450.0 Vf Binning (Optional) at Tj=5 C Vf Bin @ 0mA V01 Forward Voltage (V) 1.55 1.85 V0 1.85.15 V03.15.45 V04.45.75 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf binning. 6
Relative Luminous Intensity Vs Forward Current Forward Current Vs Forward Voltage Forward Current, ma Relative Intensity; Normalized at 0mA Relative Intensity; Relative Normalized Intensity at 0mA..4 1.8 1.6 1.6 1.4 1. 1. 1 0.8 0.8 0.6 0.4 0.4 0. 0 0 0 0 10 10 0 0 30 3040 4050 50 60 Forward Current, ma Maximum Current Vs Temperature 5 0 15 10 5 0 0 0 40 60 80 100 Ambient Temperature Relative Intensity Forward Current, ma 35 30 5 0 15 10 5 0 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0. 0.1 0 AS AlInGaP 1 1. 1.4 1.6 1.8..4.6 Forward Voltage, V Relative Intensity Vs Wavelength Pure Green Yellow Green 500 550 600 650 700 750 Wavelength; nm TS AlInGaP Amber Orange Red Super Red Allowable Allowable Forward Current Forward Vs Current Duty ratio Vs (Ta=5 Duty Ratio Deg C, tp<10us) Radiation Pattern Allowable Forward Current (ma) 1000 100 10 1 1 10 100 40 50 60 70 80 90 30 0 10 0 1.0 0.8 0.6 0.4 0. 0 Duty Ratio, Duty (%); Ratio, Ta=5% 0 C, tp<10us 7
DomiLED TM Package Outlines Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Epoxy Soldering Leads Sn-Sn Plating 8
Recommended Solder Pad 9
Taping and orientation Reels come in quantity of 500 units. Reel diameter is 180 mm. 10
Packaging Specification 11
Packaging Specification Moisture sensitivity level Barcode label LOT NO : lotno ROHS Compliant PART NO : partno QTY : product quantity per reel GROUP : group S/N : serial no D/C: date code PB Free Moisture absorbent material + Moisture indicator Reel Label The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Right Angle DomiLED 1 completed bag (500pcs) Weight (gram) 0.034 190 ± 10 TM Cardboard Box For Right Angle DomiLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 50 x 50 0.58 15 reels MAX 37,500 MAX Large 416 x 516 x 476 1.74 96 reels MAX 40,000 MAX 1
Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-00C) 300 75 55-60 C 10-30s 50 5 17 C Ramp-up 3 C/sec max. Temperature ( C) 00 175 150 15 100 75 Preheat 60-180s 50 480s max 5 0 50 100 150 00 Time (sec) 60-150s Rampdown 6 C/sec max. 13
Revision History Page 7 3-7 11 4, 6 Subjects Add Allowable Forward Current Vs Duty Ratio Graph Add minimum value for electrical characteristics Not for new design: DSR-CSS-QR-1 Update company name Not for new design: DSY-CSS-QR-1 Update Graph: Relative Luminous Intensity Vs Forward Current Error in carrier tape Not for new design: DSO-CSS-QR-1 Typo error in Luminous Intensity Add Characteristics Add Thermal Resistance Add new partno: DSG-CSS-QR-1 Add new partno: DSR-CSS-ST-1 Update Vf bin naming Date of Modification 17 Apr 009 1 May 009 9 Jan 010 08 Mar 010 9 Sep 010 9 Dec 011 5 Jun 01 13 Mar 013 07 May 013 1 Nov 013 16 Dec 014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, does not assume any liability arising out of the application or use of any product described herein. reserves the right to make changes to any products in order to improve reliability, function or design. products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of. 14
About Us is a dynamic Malaysian Corporation that is among the world s leading SMT LED Manufacturers. An excellence driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certifi ed quality assurance acclaim, s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 83 3566 Fax: +606 83 0566 E-mail: sales@dominant-semi.com TM