Rf Safe Netting CONTENTS SUMMARY OF FEATURES... 2 TECHNICAL INFORMATION... 2 Prduct Descriptin... 2 Applicatins... 2 Prduct Infrmatin... 2 Handling & Strage... 3 Technical Data... 4 Size Range Available... 4 Fixing Instructins... 5 Building prducts yu can cunt n FREEPHONE 0800 330 320 Page 1 f 5 www.paulindustries.c.nz inf@paulindustries.c.nz 31/10/14
Rf Safe Netting SUMMARY OF FEATURES Cnsists f wven flat hexagnal netting made frm galvanised mild steel wire, with reinfrcing wires at 113mm centres. Acts as a supprt fr rfing underlays and insulatin, and prvides a permanent safety net against falls. Suitable fr use n bth cmmercial and residential sites. Pliable and easier t wrk with than traditinal safety mesh cnturs easily arund hips and valleys. Can be used ver the trusses r as a safety net ver the tp plate. Suitable fr fixing ver steel and timber purlins. Unique shape and small mesh size helps t prevent tls falling thrugh. EXACT-CUT service prvides precise lengths fr each jb. Tested and cmpliant with Appendix B f AS/NZS 4389: 1996 Safety Mesh Standard. Galvanising cmplies with AS/NZS 4534: 2006 Class W02. Wire tensile strength is between 380 and 550 MPa. Reduced jin verlap prvides the highest effective cverage f any rf safe prduct n the market. Kiwi made. TECHNICAL INFORMATION Prduct Descriptin Baynet Rf Safe Netting cnsists f a wven flat hexagnal, galvanised mild steel wire netting with reinfrcing wires spaced at 113mm centres. It is fr use as a supprt fr building papers, rf underlays, aluminium fil and glasswl insulatin which prvides a permanent safe wrking envirnment. Applicatins Baynet Rf Safe Netting is fr use n timber and steel framing as a supprt fr rfing underlay and building paper under rf claddings, t prvide a permanent safe wrking envirnment thrughut initial rf installatin and fr any maintenance wrk in the future. Prduct Infrmatin When used fr rfing, Baynet Rf Safe Netting becmes a permanent fixture fr the life f the building and prvides the required safe wrking envirnment thrughut initial rf installatin and fr any maintenance wrk in the future. Baynet Rf Safe Netting can be used t supprt building paper, rf underlay, aluminium fil r glasswl insulatin in rf spaces but is dependent n the site cnditins. In all cases Baynet Rf Safe Netting is nt t be expsed t the elements fr mre than 7 days. 113mm Rf Safe Netting shall be used when all f the fllwing cnditins apply; Wire netting will be expsed t the elements fr less than 3 days. Building prducts yu can cunt n FREEPHONE 0800 330 320 Page 2 f 5 www.paulindustries.c.nz inf@paulindustries.c.nz 31/10/14
Rf Safe Netting The NZS 3604 wind zne is High r less, r fr specific design cases the Design Wind Speed as determined frm NZS 4203: 1992, must nt exceed 44mls. Maximum rainfall is 1400mm/year. A wind barrier (rigid r nn-rigid equivalent) may be cnstructed by using Baynet Rf Safe Netting backing supprt fr tw layers f building paper r rf underlay. Where this methd is used, the laps f each layer must be staggered, such that the lap centres f the first layer are n clser than 450mm frm the lap centres f the secnd layer. The need fr a wind barrier depends n the cladding type and the Wind Zne. The requirements are given in Clause 11.4.1 and Clause 11.5.2.6 f NZS 3604 and NZBC Acceptable Slutin E2/AS1, Paragraphs 2.5.1 t 2.5.4. Fr all applicatins including rfs t specific design, the rf cladding materials must cmply with Table 11.2 f NZS 3604. When used as a supprt fr building paper r rf underlay in rf spaces in accrdance with the manufacturer s instructins cntained within this brchure, Baynet Rf Safe Netting, 113mm mesh size, will meet the perfrmance requirements f NZBC B2.3.1(a), 50 years r B2.3.1(b) 15 years as apprpriate and will have a serviceable life in excess f 50 years. A 50 year durability is required where used t supprt a building paper r rf underlay under cncrete r clay rf tiles. This durability pinin is cntingent upn the prducts being: Enclsed within the rf space r wall cavity; Subject t a dry interir envirnment where the building paper r rfing underlay are subjected t ccasinal wetting nly and the rf and wall cladding are well maintained; Nt expsed t a crrsive envirnment; Nt expsed t relative humidities greater than 90%; Nt expsed t the atmsphere fr mre than ne week befre cladding is installed; Installed where air extractin r dehumidifying devices are nt vented int the rf space r wall cavity. Baynet Rf Safe Netting, if used, installed and maintained in accrdance with the instructins and cnditins in this brchure, will meet the fllwing prvisins f the NZBC: Clause B1 Structure: Perfrmance B1.3.1, B1.3.2 and B1.3.4 fr the relevant physical cnditins f B1.3.3. Clause B2 Durability: Perfrmance B2.3.1(a), fr supprt f building paper r rfing underlay behind masnry r cncrete walls r under clay r cncrete rf tiles, nt less than 50 years. Perfrmance B.2.3.1(b) fr supprt f building paper and rfing underlays in rf and wall spaces which are easy t access r replace, nt less than 15 years. Clause F2 Hazardus Building Materials: Perfrmance F2.3.1. Handling & Strage Baynet Rf Safe Netting must be handled with care t prevent damage t the netting. The rlls must be stred n end, under cver and prtected frm misture. They must nt be duble stacked r used t supprt ther materials. Baynet Rf Safe Netting rlls must nt Building prducts yu can cunt n FREEPHONE 0800 330 320 Page 3 f 5 www.paulindustries.c.nz inf@paulindustries.c.nz 31/10/14
Rf Safe Netting be stred n cncrete flrs fr lng perids, particularly where misture is present, as this can result in an accelerated crrsin f the galvanised materials. Technical Data Baynet Rf Safe Netting cnsists f a hexagnal, 113mm flat mesh, manufactured frm, 1.0mm diameter galvanised mild steel wire with 2 reinfrcing wires f 1.2mm diameter. The 113mm rf safe netting is supplied in rlls 1800mm wide in lengths f 50m r manufactured t suit the length f yur rf run. The wire used t manufacture Baynet Rf Safe Netting cnfrms t Class W02 f AS/NZS 4534: 2006. Bth wire diameters used t manufacture this prduct have a tensile strength f between 380 and 550 MPa. The minimum mass f galvanised cating is; 25g/m2 fr the 1.0mm diameter wire, and 30g/m2 fr bth the 1.2mm diameter reinfrcing wires. Size Range Available Prduct Cde Width Mesh Wire Diameter Length (m) Ttal (m 2 ) Weight (kg) Barcde SN180050 1800 113 Hex wire 1.0mm Reinfrcing wires 2 x 1.2mm wires twisted tgether 50m Special length rlls available 90 29.67 9421026722799 Cntinued verleaf. Building prducts yu can cunt n FREEPHONE 0800 330 320 Page 4 f 5 www.paulindustries.c.nz inf@paulindustries.c.nz 31/10/14
Rf Safe Netting Fixing Instructins Building prducts yu can cunt n FREEPHONE 0800 330 320 Page 5 f 5 www.paulindustries.c.nz inf@paulindustries.c.nz 31/10/14