Sean Conway Gazebo Style # G-GZ107PST-06 DPCI # 009 05 0454 CONGRATULATIONS You ve purchased a fine item from Target. Our clear, easy to follow, step by step instructions will guide you through the project from start to finish. Feel confident that this will be a fun and rewarding project. The final product will be a quality piece that will go together smoothly and give years of enjoyment. All you will need is a philips screwdriver and a hammer. If you have any questions just call 866-578-6569. Please refer to the style number and DPCI code above when calling..
Item Identification For ease of identification all parts are labeled to correspond to the Step number in which the part is used.
Parts List 2 pieces 1A1 Left long upper frame 2 pieces 1A2 Left long lower frame 2 pieces 1B1 Right long upper frame 2 pieces 1B2 Right long lower frame 2 pieces 1C1 Right short top upper panel 2 pieces 1C2 Right short top lower panel 2 pieces 1D1 Left short top upper panel 2 pieces 1D2 Left short lower upper panel 4 pieces 1E Straight connector 4 pieces IF U shape connector 4 pieces 1G top connector 4 pieces 1H 90 connector slip 2 pieces 1I Connector 1 2 pieces 1J Connector 2 4 pieces 1K 90 beam connector 1 piece 2A Finial 1 piece 2B Center Fitting 4 pieces 2C Beam(2080mm) 2 pieces 2D Beam(1478mm) 2 pieces 2E Beam(1755mm) 1 piece 2F Canopy 4 pieces 4A Column 4 pieces 4B Column roof cover 1 piece 4C Mosquito net
Hardware Identification For ease of identification all hardware is organized into separate Hardware packs. Hardware Pack 1 8 pieces 36 pieces 28 pieces 8 pieces (AA) M6 15mm screw (TBZ00306015HQ) (BB) M6 15mm screw (TBZ00106015HQ) (CC) Big flat washer (TBZ10406HQ) (DD) M6 25mm screw (TBZ00306025HQ) For step 1 40 pieces (TT) Mosquito Net Hook 2 pieces (WW) Wrench Hardware Pack 2 24 pieces 16 pieces (AA) M6 15mm screw (TBZ00306015HQ) (GG) Peg (TBZ10608180HQ) For step 4
STEP #1 Top Main Beam (X8) AA (X36) BB (X28) CC (X8) DD (X40) TT (X2) WW Align upper and lower frames and connect them. Hang the mosquito netting hook to the frames, 5 pieces in each frame. Align pre drilled holes and screw frames and beam connectors together.
SETP #2 Top Beam Insert the beams to the center fitting. Put the big canopy over the assembled top frame. Screw the finial.
SETP #3 Insert the beams to the connectors. Draw the canopy, clasp the small hook to the holes in the frames.
SETP #4 Pegs (X24) AA (X16) GG Arrange the 4 columns, place the top frame to it. Align pre drilled holes and screw frame, column and cover together. Hang the mosquito net and tie it to the four columns. Stake peg in ground.
WARNING 1.When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Please read all instructions before assembly and use. 2.Some parts may contain sharp edges, wear protective gloves if necessary. At least two or more people are recommended for safe assembly. 3. Keep all children and pets away from assembly area. 4. Begin assembly not less than 6 feet from any obstruction such as fence, garage, house, overhanging branches, laundry line or electrical wires. 5.Install on level ground. This gazebo cannot be permanently staked or attached to concrete floor or platform. This gazebo is intended for decorative and sunshade purposes only and is not meant to withstand inclement weather including high winds, rain and snow. Gazebo fabric is water resistant, not water proof and may leak during exposure to precipitation. 6.Check all nuts and bolts for tightness before and during usage. 7.Keep all flame and heat sources away from this gazebo. This gazebo is made with fabric and bamboo that meets cpai-84 specifications for flame resistance. It is not fire proof. The fabric will burn if left in continuous contact with any flame source. The application of any foreign substance to the gazebo fabric may render the flame-resistant properties ineffective. Metal susceptible to rust. Before using clean the wrought iron stand completely with a soft dry towel. If rust develops, clean area by sanding slightly, then wipe thoroughly and apply touch-up paint (included) WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to the tent fabric may render the flame-resistant proper ties ineffective. This unit is heavy. Do not assemble this item alone. Care & Maintenance
Our iron components for garden accessories and furniture are coated with rust inhibiting paint that protects it from rusting. However, due to the nature of iron, surface oxidation (rusting) will occur once these protective coatings are scratched. This is a natural process and is not a defect! To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint. Should any scratching or damage occur, we recommend immediate touch-up with rust inhibiting paint, which is included in the package. Surface rust can also be easily removed with a very light application of common cooking oil. If surface oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping on to deck or patio and cause damaging stains, which may be difficult to remove. This can be prevented if measure is taken to keep the product from oxidizing. Limited Warranty This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or workmanship for a period of 6 month. We don't reimburse for transportation or delivery costs, or compensate the individual or any outside party for assembling or disassembling the product. Exclusions: Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items will be in the original style and color, or a similar style and color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you may also have other rights, which vary from state to state. For technical assistance on assembly or replacement parts Please do not return this product to the store, call Sunjoy Industries at 1(866) 578-6569 from 8:30 AM to 5:30 EST Monday to Friday or fax the replacement part form which put into the package to (740)-283-3549 or Email target06@sunjoygroup.com for assistance.