TOP NIR LED SMT SMT High Performance Infrared TOP NIR LED SMT consists of an InGaAsP LED mounted on the lead frame as TOP LED package It is sealed with epoxy resin. It emits a spectral band of radiation at nm. Outer Dimension (Unit:mm) <Specifications> 1. Product Name: TOP NIR LED. Type Number: SMT. Chip: Chip Material: InGaAsP Peak Wavelength: nm. Package. Lead Frame Die: Silver Plated - Package Resin: PAT - Lens: Epoxy or Solicone Resin Absolute Maximum Ratings[Ta= ] Item Symbol Maximum Rated Value Unit Power Dissipation PD mw Forward Current IF ma Pulse Forward Current* IFP 0 ma Reverse Voltage VR V Thermal Resistance Rthja 0 K/W Junction Temperature Tj Operating Temperature TOPR -0 ~ + Storage Temperature TSTG -0 ~ + Soldering Temperature** TSOL 0 * Duty=1% and Pulse Width=us. **Soldering condition must be completed within second at 0. Electro-Optical Characteristics [Ta= ] Item Symbol Condition Minimum Typical Maximum Unit Forward Voltage Radiated Power* Radiant Intensity** VF IF=0mA 0.9 1. VFP IFP=00mA 1.7 PO IE IF=0mA. IFP=00mA 1 IF=0mA. IFP=00mA 1 * Measured by G70-. ** Measured by Ando Optical Multi Meter AQ & AQ7. V mw mw/sr Peak Wavelength λp IF=0mA 0 nm Half Width λ IF=0mA 1 nm Viewing Half Angle θ1/ IF=0mA ± deg Rise Time tr IF=0mA 0 ns Fall TIme tf IF=0mA 0 ns Marubeni America Corporation 9 Freedom Circle, Suite 0, Santa Clara, CA90
TOP NIR LED SMT Forward Current (ma) Forward Current - Forward Voltage 1 (ta= C, tw=µs, Duty=1%) 1 Relative Radiant Intensity - Forward Current (ta= C, tw=µs, Duty=1%) 0mA Standard 0 0.0 0. 0. 1. 1. Forward Voltage (V).0 0.01 1 0 Forward Current (ma) Forward Current Ifp [ma] 1 Forward Current - Pulse Duration khz 0 1 Duration tw [µs] 1kHz Hz Hz Allowable Forward Current(mA) 1 90 0 70 0 0 0 0 0 Allowable Forward Current - Ambient Temperature Rthja=0K/W 0 0 0 0 0 0 Marubeni America Corporation 9 Freedom Circle, Suite 0, Santa Clara, CA90
TOP NIR LED SMT Forward Voltage (V) 1. 1. 1. 1.1 1.0 0.9 0. 0.7 0. 0. Forward Voltage - Ambient Temperture If=0mA 9 7 1 9 7 Relative Radiant Intensity - Ambient Temperature If=0mA 0. 0 0 0 0 0 0 0 0 0 0 0 190 Peak Wavelength - Ambient Temperature If=0mA Peak Wavelength (nm) 170 1 0 0 0 0 0 Data Sheet SMT0 Marubeni America Corporation 9 Freedom Circle, Suite 0, Santa Clara, CA90
TOP NIR LED SMT Relative Spectral Emission Radiation Characteristics 1.0 0.9 0. 0.7 0. 0. 0. 0. 0. (ta= C) 1.0 0.9 0. 0.7 0. 0. 0. 0. 0. ± 0.0 0 Wavelength (nm) 0 0.0-90 -0-0 0 0 0 90 Angle (deg.) Radiation Characteristics A0 A0 A0 A 0 0 0 0 ± Angle (deg.) A70 A0 A0 0 0 70 A0 0 A90 1 0.9 0. 0.7 0. 0. 0. 0. 0. 0 0. 0. 0. 0. 0. 0.7 0. 0.9 1 90 Marubeni America Corporation 9 Freedom Circle, Suite 0, Santa Clara, CA90
TOP NIR LED SMT Wrapping Moisture barrier bag aluminum laminated film with a desiccant to keep out the moisture absorption during the transportation and storage. SMD LED storage and handling precautions Storage Conditions before Opening a Moisture-Barrier Aluminum Bag Before opening a moistureabarrier aluminum bag, please store it at <0ºC, <0%RH. Please note that the maximum shelf life is 1 months under these conditions. Storage Conditions after Opening a Moisture-Barrier Aluminum Bag After opening a moisture-barrier aluminum bag, store the aluminum bag and silica gel in a desiccator. After opening the bag, please solder the LEDs within 7 hours in a room with - 0ºC, <0%RH. Please put any unused, remaining LEDs and silica gel back in the same aluminum bag and then vacuumaseal the bag. It is recommended to keep the re-sealed bag in a desiccator at <0%RH. The 7-hour- long floor life does not include the time while LEDs are stored in the moistureabarrier aluminum bag. However, we strongly recommend to solder the LEDs as soon as possible after opening the aluminum bag Notes about Re-sealing a Moisture-Barrier Aluminum Bag When vacuumasealing an opened aluminum bag, if you find the moisture-indicator of the silica gel has changed to pink from blue (indicating a relative humidity of 0 % or more), please do not use the unused LEDs, the aluminum bag, or the silica gel. Notes about Opening a Re-sealed Moisture-Barrier Aluminum Bag When opening a vacuumed and re-sealed aluminum bag in order to use the remaining LEDs stored in the bag, if you find that the moistureaindicator of the silica has changed to pink, please do not use the LEDs. Marubeni America Corporation 9 Freedom Circle, Suite 0, Santa Clara, CA90
TOP NIR LED SMT Disclaimer Product specifications and data shown in this product catalog are subject to change without notice for the purposes of improving product performance, reliability, design, or otherwise. Product data and parameters in this catalog are typical values based on reasonably up-to-date measurements. Product data and parameters may vary by user application and over time. Products shown in this catalog are intended to be used for general electronic equipment. Products are not guaranteed for applications where product malfunction or failure may cause personal injury or death, including but not limited to life-supporting / saving devices, medical devices, safety devices, airplanes, aerospace equipment, automobiles, traffic control systems, and nuclear reactor control systems. 017.0 Marubeni America Corporation 9 Freedom Circle, Suite 0, Santa Clara, CA90