Stronger - Faster - Smarter. Parapet Cap Window & Door Sill Plate. Engineered Framing System

Similar documents
Featuring TJ Rim Board and TimberStrand LSL

Load Tables, Technical Data and Installation Instructions

TRUS JOIST RIM BOARD. Featuring TJ Rim Board and TimberStrand LSL. Multiple thicknesses, grades, and products to cover all your rim board needs

2.9 WINDOW & DOOR BUCKS

ICC-ES Evaluation Report

Beam & Header Technical Guide. LP SolidStart LVL. 2900F b -2.0E. U.S. Technical Guide U.S. TECHNICAL GUIDE

Lateral Support. Decks over 24 above grade require lateral support* *Exceptions to be discussed later

Joint Evaluation Report

COMPOSITE SIDING INSTALLATION GUIDE

Originally Issued: 06/28/2012 Revised: 06/21/2017 Valid Through: 06/30/ Design

ESR-2648 Reissued May 1, 2012 This report is subject to renewal June 1, 2013.

SDWH TIMBER-HEX Screw

ESR-1254 * DELETED BY CITY OF LOS ANGELES. Reissued April 1, 2006 This report is subject to re-examination in one year.

Attach Trusses and Rafters Faster

LP SolidStart Laminated Strand Lumber and Laminated Veneer Lumber Louisiana-Pacific Corporation Revised May 6, 2018

ICC-ES Evaluation Report

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: LAMINATED VENEER LUMBER SECTION: LAMINATED STRAND LUMBER REPORT HOLDER:

DIVISION 6 WOOD AND PLASTICS

CITY OF LOS ANGELES CALIFORNIA

Multi-Institutional Academic Health Science & Research Center Evansville, IN

Coatings ASTM B117 SST Salt Spray Test Kesternick Phosphate Zinc E-Coat Dip Spin Coatings

ICC-ES Evaluation Report Reissued June 1, 2010 This report is subject to re-examination in one year.

LP SolidStart Laminated Strand Lumber (LSL) and Laminated Veneer Lumber (LVL) Louisiana-Pacific Corporation Revised July 21, 2017

Five Star Panel Installation Instructions

GLOSSARY OF TERMS SECTION 8

Sections & Details. WOOD SILL and FLOOR CONSTRUCTION NOTES

Shapes Siding. Perfection Shingles. Chalk Line

APA Performance Rated Rim Boards

INSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:

STACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS

Product Guide Specification

8/7/ HP SWING DOOR INSTALLATION INSTRUCTIONS

Vinyl Windows and Doors Manufactured by VPI Quality Windows

FT DIX ELEMENTARY SCHOOL PHASE VII, CLASSROOM ADDITION PEMBERTON TOWNSHIP REGAN YOUNG ENGLAND BUTERA, PC PROJECT #5349A

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:

Windows Installed into Walls with Polyiso and Wood Framing. Installation Instructions Standard Method Revised 10/24/2016

Vinyl Windows Manufactured by VPI Quality Windows

ICC-ES Evaluation Report Reissued March 1, 2011 This report is subject to renewal in two years.

POST FRAME CONSTRUCTION MANUAL

HowtoPlans. 24'x8' Walk In Chicken Coop Plan. Designed for up to 50 chickens. .org

B. Related Sections: The following Sections contain requirements that relate to this Section:

THE ENGINEERED WOOD ASSOCIATION

Ash Brook Golf Course Scotch Plains, New Jersey

Sections & Details VOCABULARY


DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC AND COMPOSITE FASTENINGS REPORT HOLDER: EVALUATION SUBJECT:

Product Catalog. Since 1980 The Natural Choice for Preservative-Treated Wood

Collins Engineers Palmetto Islands County Park Boardwalk Repairs 03/28/2014 SECTION ROUGH CARPENTRY

ESR-2403 Reissued October 1, 2009 This report is subject to re-examination in one year.

Endura-Classic Craftsman Information

A. Product Data: For each type of process and factory-fabricated product indicated.

E-Z BUILD STEEL BARN 12' 12' 12' 16' 12' 20'

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER: DEWALT EVALUATION SUBJECT:

Trusted ICC ES PASLODE, Evaluation. report, or as to any. ICC-ES Evaluation

Installation Guidelines for all Quaker products with nail fins New Construction nail fin installation with a Zip sheathing system.

SECTION R507 DECKS DECKING LEDGER BOARD BEAM. FOOTING BEAM SPAN CANTILEVER For SI: 1 inch = 25.4 mm FIGURE R507.2 DECK CONSTRUCTION

ESR-3042* Reissued August 1, 2012 This report is subject to renewal September 1, 2014.

FASTENERS BUILDING DEPARTMENT

Tools required by installer: Materials required by installer:

Installation Guidelines For ALUMINUM M-SERIES 3 PANEL SLIDING DOOR

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:

Mach Wall Installation Instructions

E-Z BUILD SHED GUIDE 12' 12' 12' 16' 12' 20'

Forming and Shoring Product Selector

3.1 General Provisions

Installation Guidelines. Next Dimension. Single Hung / Single Hung Fixed / Double Hung / Sliding Window / Fixed Window

Chevy Chase Club June 30, 2008 Bowie Gridley Architects

GARDEN SHED BRIGHTOLN

TCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II

Attach Trusses and Rafters Faster

REPORT HOLDER: DEWALT 701 EAST JOPPA ROAD TOWSON, MARYLAND EVALUATION SUBJECT:

ICBO Evaluation Service, Inc Workman Mill Road, Whittier, California / 16

Installation Guidelines

DIVISION 6 WOODS AND PLASTICS SECTION ROUGH CARPENTRY

ICC-ES Evaluation Report Reissued March 1, 2011 This report is subject to renewal in two years.

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER: EVALUATION SUBJECT:

Keystone Garage Assembly Manual

Section Downloads. Terminology Outline. Industry Standards/ Publications. American Softwood Lumber Standard ANSI/TPI 1. Section 02: Terminology

DIVISION: CONCRETE SECTION: CONCRETE ANCHORS REPORT HOLDER: HILTI, INC. EVALUATION SUBJECT:

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: NAILS REPORT HOLDER: MiTek USA, INC.

GARDEN SHED - WALESDimensions: 10x10 (1 1/8')"

Installation Guide for Andersen 400 Series Tilt-Wash Transom and 200 Series Narroline Transom Windows

LP SolidStart Laminated Strand Lumber and Laminated Veneer Lumber Louisiana-Pacific Corporation Revised May 6, 2011

Heartland Perma-Column 1841 E 1450 Rd. Lawrence, KS (785)

Windows Installed into Walls with Polyiso and Wood Framing. Installation Instructions Picture Frame Method Revised 10/24/2016

VERSA-LAM BCI INSTALLATION GUIDE LIMIT STATES DESIGN CANADA

SPECIFIC ENGINEERING DESIGN GUIDE

E-Z BUILD SHED BUILDING GUIDE 10' 10' 10' 12' 10' 14' 10' 16' 10' 20'

Section 914. JOINT AND WATERPROOFING MATERIALS

ESR-1799 Reissued April 2014 This report is subject to renewal June 1, 2015.

ESR-2024* Reissued September 1, 2011 This report is subject to renewal September 1, 2013.

RECOMMENDED INSTALLATION PROCEDURE LEVEL 3

Installation Guidelines For Quaker Window Products Aluminum flange fin sub sill & receptor system using a T mulled twin window unit.

Chapter 23. Garage Construction

Shearwall System Installation Guide

Section Downloads. Lumber Design Values. Lumber Standard. Western Lumber Product Use Manual. Section 05: Truss Materials.

PIVOT DOOR 3400P INSTALLATION INSTRUCTIONS

Transcription:

Stronger - Faster - Smarter Parapet Cap Window & Door Sill Plate Engineered Framing System

Introduction PreBuck, an innovative manufacture of One -Piece Parapet Cap, Window, Door, Mechanical opening frame system and Wet-Set Sill Plate. All products are manufactured from engineered (LSL) lumber, treated with Zinc Borate though complete cross section. MDI resin is used as the bonding agent, it is 100% waterproof when cured MDI resin turns to a durable plastic.

Features Designed for direct contact with Concrete Wall surface, attach to any type CMU-Tilt up-steel-icf Non-Corrosive to Metals Insect and Decay Resistive Will Not Cup Twist Warp Engineered Stable, Straight & Flat framing material LEED points- Contributes towards certification GREEN-National approved building certificate ( NAHB) Warranty Limited 25 year (AWPA) Cat. 2(UC2)

Benefits Custom manufactured (ready to install on jobsite) Reduce number of employees needed for installation Reduce installation time Minimize jobsite waste Minimize amount of material needed on jobsite No need for special fasteners ( Non Corrosive to Metals) Consistent Stable, Straight and Flat framing material Easily attach future building components Minimize warranty call backs associated with standard and pressure treated lumber such as Cupping Twisting - Warping

Engineered Framing System Designed for ICF Insulated Concrete Forms Frame Out Windows Doors Louvers Duct Work Mechanical Misc.

Dovetail Concrete Keyways ( 2 )- Continuous Keyways Non obstructive with ICF web Integrates frame directly into ICF wall Eliminates air infiltration

Dovetail Concrete Keyways Non obstructive to ICF web

Corner Assembly Metal over lapped and nailed LSL over lapped and nailed

Metal Flange Self aligns frame unit on wall Supports ICF during concrete pour

Metal Flange

Supports & Plumbs ICF wall

Bracing strong backs align flush with ICF wall

Bending Strength Employee combined weight 410 pounds Window width - 87 - inches

Internal Bracing Minimal bracing required

Widths Custom cut to most any width 5 ½ 1 ½ Thickness

Flush Supports wall & guides ICF during installation

A Doors B Pour Concrete through doorway Plywood sub-floor attach to door sill

Knockdown Style Bundled Shipping palletized

Commercial Steel Door Frames Attach Easily

Gable End Cap Dead wall

Service door Radius Top

Radius Top

Radius Top

Radius Top

Trapezoid

Misc. Configurations

Standard Drywall Screws

Exterior Metal attachment Non Corrosive to Metals!!!!!

PSI PSI Mechanical Properties Comparison Data Sheet Engineered Framing System Manufactured with StrandGuard TimberStrand LSL Bending Tension Shear Compression - Perpendicular to Grain Specific Gravity (1) Char Rate R- Value (2) Treated for Contact with Concrete (3) Rim SPF #2 SYP #2 LSL Fb N/A 875 1050 1900 Ft N/A 450 650 1075 Fv N/A 135 175 150 Fc 660 425 565 670 G 0.38 0.42 0.55 0.50 TimberStrand LSL = equivalent char rate as solid sawn lumber 1.86 R No No Yes Yes (ZB) Design Reference - Data - Notes All design properties for StrandGuard TimberStrand LSL (LSL) and TJ-Rim Board (Rim) were obtained from ICC ESR-1387. All design properties for SPF #2 and SYP #2 were obtained from 2005 NDs for Wood Construction. (1) Specific Gravity of LSL = 0.5 into the face, 0.42 into the edge. Specific Gravity of Rim = 0.38 into face and is not recommended into the edge. (2) ASTM E 518-85, R-Value shown is for thickness of 1.5" LSL material. (3) StrandGuard LSL treating process applies Zinc Borate (ZB), an EPA-registered biocide thoughtout the entire cross section. Zinc Borate (ZB) is non-corrosive to metal fasteners and connectors.in addition no special handling or disposal is required. (4) StrandGuard LSL meets AWPA standards for use Category 2 (UC2). Protected from moisture, but may be subject to sources of moisture (e.g. contact with concrete). PreBuck,LLC ICF Bucking & Parapet Cap Framing System meet AWPA category 2 (UC2). (5) ICC 700-2008 - NAHB Research Center - Green Approved - Residential Construction Insect and Decay Resistant Warranty - Commercial Construction (4) No No Yes No No No Yes Yes Resistant to Bowing -Twisting - Cupping National Green Building Certification (5) Yes No No Yes Certification # 00008 Bending Strength Comparison Mechanical Properties Comparison 3000 2000 2500 2000 1500 1000 SPF #2 875 SYP #2 1050 LSL 1900 Rim SPF #2 SYP #2 1800 1600 1400 1200 1000 800 600 Rim SPF #2 SYP #2 500 0 Rim 0 Fb LSL 400 200 0 Fb Ft Fv Fc LSL Material Mechanical Property

Brett Schlosser E-mail: brett@prebuckproducts.com Cell: 616-309-6256 Web: www.prebuckproducts.com