DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1113-XL June 013 Part #10
TABLE OF CONTENTS Description Page No. Saw Assembly (Normal Cut).... - Saw Assembly (Up-Cut)...... - Gas Engine Assembly...... Blade Shaft Assembly...... Front Axle Assembly...... Blade Guard Assembly......11 Hose Assembly With Valve.....1 Pointer Assembly........13 Pointer Assembly (Up-Cut)........1 Notes....1 Warranty.. Rear Cover Quick Reference Service Filters/ Belts DP Part No. Description Manufacturer s Part No. 0001 Air Filter for 11HP Honda (Honda #1-ZE3-0) 0310 Fuel Filter for 11HP Honda (Honda #1RZE-W01) 0030 Blade Shaft Belt (3) for 11HP Honda (Gates #3VX300)
11 3 0 1 1 1 0 1 1 1 30 31 1 1 3 1 SAW ASSEMBLY, #01 1 1 1 1 3 3 33 13 3 0 3 3 3 1
SAW ASSEMBLY (REGULAR CUT), #01 ITEM PART NO. QTY DESCRIPTION 1 000 1 Frame Weldment 000 1 Gas Engine Parts 3 00 1 Blade Shaft Assembly 000 1 Front Axle Assembly 0031 1 1" Blade Guard Assembly 0011 1 Hose Assembly with Water Valve 000 1 Pointer Assembly 0013 1 Shaft, Belt Adjustment 0013 1 Blade Guard Spacer 030 1 Tapered Guard Mount 11 000 1 Plate, Belt Guard 1 001 1 Belt Guard Weldment 13 000 1 Sliding Handle Weldment 1 01 1 Bracket, Handlebar Lever 1 01 1 Lever, Handlebar 1 03 Cap, 1-1/" Sq. Tube 1 00001 /" Handle Grip 1 001 1 Rear Axle 1 03 Wheel " X " X 3/" 0 001 Set Collar, 3/" 1 0001 Flat Washer, 3/" SAE 000 Cap Screw, Hex Hd., 3/-1 x -1/" 3 000 Set Screw, Soc. Hd., 1/-0 x 1/" 0031 Cap Screw, Hex Hd., M x 0mm 0 Cap Screw, Flat Hd. Soc., M x 0mm 00331 1 Cap Screw, Hex Hd., M1 x 0mm 0031 Lock Washer, M Split 003 1 Lock Nut, M1 Nylon 0030 Lock Nut, M Nylon 30 0030 Wing Screw, M x 1mm 31 00 Wrench Head 3 000 Flat Washer, 1/" SAE 33 000 Cap Screw, Hex Hd., 1/-13 x 1-1/" 3 000 Lock Washer, 1/" Split 3 01 1 Throttle Control, 1" 3 0030 Cap Screw, Hex Hd., M x 0mm 3 00301 Lock Nut, M Nylon 3 0000 Flat Washer, 1/" SAE 3 0 1 Wire Harness, Stop Switch 0 001 Cap Screw, Hex Hd., 1/-0 x 3/" 1 000 Lock Washer, 1/" Split 0001 Flat Washer, # USS
SAW ASSEMBLY (UP-CUT), #00 1 1 13 1 1 1 3 11 3 33 3 3 1 0 1 3 3 1 1 3 31 30 1 3 0 1 1 0
SAW ASSEMBLY (UP-CUT), #00 ITEM PART NO. QTY DESCRIPTION 1 000 1 Frame Weldment 001 1 Gas Engine Parts 3 00 1 Blade Shaft Assembly 000 1 Front Axle Assembly 0031 1 1" Blade Guard Assembly 0011 1 Hose Assembly with Water Valve 0 1 Pointer Assembly 0013 1 Shaft, Belt Adjustment 0013 1 Blade Guard Spacer 030 1 Tapered Guard Mount 11 000 1 Plate, Belt Guard 1 001 1 Belt Guard Weldment 13 000 1 Sliding Handle Weldment 1 01 1 Bracket, Handlebar Lever 1 01 1 Lever, Handlebar 1 03 Cap, 1-1/" Sq. Tube 1 00001 /" Handle Grip 1 001 1 Rear Axle 1 03 Wheel " X " X 3/" 0 001 Set Collar, 3/" 1 0001 Flat Washer, 3/" SAE 000 Cap Screw, Hex Hd., 3/-1 x -1/" 3 000 Set Screw, Soc. Hd., 1/-0 x 1/" 0031 Cap Screw, Hex Hd., M x 0mm 0 Cap Screw, Flat Hd. Soc., M x 0mm 00331 1 Cap Screw, Hex Hd., M1 x 0mm 0031 Lock Washer, M Split 003 1 Lock Nut, M1 Nylon 0030 Lock Nut, M Nylon 30 0030 Wing Screw, M x 1mm 31 00 Wrench Head 3 000 Flat Washer, 1/" SAE 33 000 Cap Screw, Hex Hd., 1/-13 x 1-1/" 3 000 Lock Washer, 1/" Split 3 00 1 Throttle Control, 3" 3 0030 Cap Screw, Hex Hd., M x 0mm 3 00301 Lock Nut, M Nylon 3 0000 Flat Washer, 1/" SAE 3 001 Cap Screw, Hex Hd., 1/-0 x 3/" 0 0 1 Wire Harness, Stop Switch 1 000 Lock Washer, 1/" Split 0001 Flat Washer, # USS
GAS ENGINE PARTS #000 11 3 11.1 11. 11. 11. 11.3 ITEM PART NO. QTY. DESCRIPTION 1 0011 1 Engine,11 HP Honda GX30 000 Motor Mount Adapter 3 013 1 Key, 1/" Sq. x -1/" 000 1 Taper Bushing, 1" w/ Set Screws 000 1 Sheave, 3.1-3 Groove 0030 3 V-Belt, 3VX300 (Regular Cut) 0003 3 V-Belt, 3VX31 (Up-Cut) 00 1 Muffler Deflector, 11-13 HP Honda 000 3 Screw, Self Tapping, #-3 x 3/" 0001 Flat Washer, 3/" SAE 0031 Cap Screw Hex Hd., M-1. x 3 11 00 1 Oil Drain Assembly 11.1 3003 1 Adapter, M1 x 1. M to /1" Male JIC 11. 3000 1 Fitting, /1" F. JIC to 1/" Pushlock 11.3 30000 1 Cap, 1/" JIC 11. 30000 1 Fitting, 1/" M. JIC to 1/" Push Lock 11. 0 1 1/" x.00" Oil Drain Hose
BLADE SHAFT ASSEMBLY, #00 3 1 ITEM PART NO. QTY. DESCRIPTION 1 000 1 Blade Shaft 000 1 Inner Flange -1/" 3 000 1 Outer Flange, -1/" w/ Pin 001 1 Key, 3/1" Sq. x 3/" 01 1 Key, 1/" Sq. x 1-1/" 000 1 Sheave, 3.3-3 Groove 0033 1 Taper Bushing, 1-1/" w/ Set Screws 001 Pillow Block Bearing 1-1/" 000 1 Flange Nut, /-11 L.H.
FRONT AXLE ASSEMBLY, #000 1 11 3 11 1 1 1 1 1 13 ITEM PART NO. QTY DESCRIPTION 1 0003 1 Front Axle Weldment 00 1 Release Plate 3 00 1 Mounting Plate 03 Wheel " X 1-1/" X 3/" 011 Retaining Ring, External 3/" 003 1 Spring, Gas 00 1 Gas Spring Seal Protector 03 1 Cable Assembly 001 Set Collar, 3/" 000 1 Lock Nut, 1/-0 Nylon 11 0000 Flat Washer, 1/" SAE 1 003 1 Cap Screw, Hex Hd., 1/-0 x 1-3/" 13 00003 Flat Washer, 3/" SAE 1 00 Shoulder Screw, 1/" x 3/" (3/-1) 1 00 1 Clevis, M1 1 003 Shoulder Screw, 3/ x 3/" (/1-1) 1 0003 Lock Nut, /1-1 Nylon
BLADE GUARD ASSEMBLY 1", #0031 1 1 3 1 1 1 1 1 1 0 13 1 11 1 13 ITEM PART NO. QTY. DESCRIPTION 1 0030 1 1" Blade Guard 000 1 Blade Guard Hinge 3 01 Water Tube Clamp 013 1 Water Manifold 00 1 Water Manifold Gasket 003 1 Splash Flap 003 Cap Screw, Hex Hd., M x 0mm 0031 1 Cap Screw, Hex Hd., M x 3mm 0030 1 Lock Nut, M Nylon 00 Cap Screw, Hex Hd., M x mm 11 000 1 Spring, 3/ X.0 X 3" 1 00301 Lock Nut, M Nylon 13 0030 Cap Screw, Hex Hd., M x 0mm 1 03 Water Tube for 1" Guard 1 300001 1 Plug, 1/" NPT 1 30000 1 Fitting, 3/" M. Pipe to 3/" M. Garden 1 0001 Flat Washer, # USS 1 0003 Fender Washer, 1/" x 1-1/" 1 0030 Cap Screw, Flat Hd. Soc., M x 1mm 0 100001 1 Warning Label 11
HOSE ASSEMBLY WITH WATER VALVE #0011 1 3 ITEM PART NO. QTY. DESCRIPTION 1 01 1 Hose Assembly, 30" Long 3000 1 Water Valve 3 3001 1 Fitting, 1/" M. Pipe to 3/" M. Garden 30000 Close Nipple, 1/" NPT 3000 1 Pipe Elbow, 1/" Female 3000 1 Fitting, 1/" F. Pipe to 3/" F. Garden 3000 1 Hose Filter Washer 00 1 Flat Washer, /" SAE 1
3 000 POINTER ASSEMBLY 11 1 ITEM NO. PART NUMBER QTY. DESCRIPTION 1 00 1 Pointer Bar - Straight 000 1 Pointer Bar - Offset 3 00 1 Wheel, 3" 0001 1 Lock Nut, 3/-1 Nylon 0031 1 Lock Washer, M Split 00033 1 Hex Nut, 3/-1 0003 1 Pointer Rod 0030 Lock Nut, M Nylon 00333 Cap Screw, Hex Hd., M x mm 00 1 Rope, 1/ x " 11 3001 3 Pinch Clamp, Two Ear 13
POINTER ASSEMBLY, #0 1 3 ITEM PART NO. QTY. DESCRIPTION 1 00 1 Pointer Assembly 00013 1 Cap Screw, Hex Hd., 3/-1 x 1-1/" 3 0001 1 Flat Washer, 3/" SAE 0001 1 Lock Nut, 3/-1 Nylon 1
NOTES 1
EQUIPMENT AND PARTS WARRANTY Diamond Products warrants all equipment manufactured by it against defects in workmanship or materials for a period of one (1) year from the date of shipment to Customer. The responsibility of Diamond Products under this Warranty is limited to replacement or repair of defective parts at Diamond Products Elyria, Ohio factory, or at a point designated by it, of such parts as shall appear to us upon inspection at such parts, to have been defective in material or workmanship, with expense for transportation and labor borne by Customer. In no event shall Diamond Products be liable for consequential or incidental damages arising out of the failure of any Product to operate properly. Integral units such as engines, electric motors, batteries, transmissions, etc., are excluded from this Warranty and are subject to the prime manufacturer s warranty. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY DISCLAIMED. 333 Prospect Street, Elyria, Ohio 03 (0) 33-1 (00) 31-33 Fax (0) 33- www.diamondproducts.com Printed in U.S.A. Part #10