OLDA door fittings (hardware) 2017 RZ OLDA Innovation AB Åvägen 1B, SE-435 44 Mölnlycke, Sweden tel: +46(0)31-26 68 92 fittings@olda.com web: www.olda.com VAT.No: SE 556592-7224-01 ISO 9001:2008 & ISO 14001:2004 CERTIFIED
2 The company History When OLDA was founded 1985 in Gothenburg, Sweden, the main business was development of special tools and equipment for Volvo Cars, SKF and other large companies. From July 2015, OLDA is a part of the RZ-Gruppen, a collection of companies with different specialities - which complements each other, with different types of machining etc. Market The first series of door-fittings was introduced to the Scandinavian market in 1992. Since then, the product range has constantly been expanded and refined. Focus on export to Europe was initiated in 1997, and today, Olda products can be found in most of the European countries. Business Concept The business concept of OLDA Innovation AB is to develop and manufacture door fittings of high quality, at reasonable prices in the right time. A selection of our products. Our strength is based on flexibility. As a manufacturer we can offer our large quantity customers different solutions concerning our products. An other example is that we can offer several coatings or RAL-colours according to request. Activities All development and most of the manufacturing are performed at our facilities in Gothenburg. In November 2016 the company moved from Vagnmakaregatan to Åvägen in Mölnlycke. For distribution in Europe, we have business-partners in the different countries or markets. Göteborg - Sweden, Vagnmakaregatan 14.
3 Contents page: The company About OLDA Innovation AB 2 Contents (this page) 3 General information Distribution- and product-information 4 Opening limiters Opening limiter 73 DS 5 Door fastener 77 DA 5 Door buffer 94 DS 5 Frame bridge Frame bridge 71 KPF 5 Door coordinators Door coordinator 25 DK 6 Door coordinator 30 DK 6 Bracket 31 DK 6 Door handles Flush ring handle 85 PM 7 Flush lock handle cover 86 PM 7 Guide - flush bolts and different types of doors 8 for steel- and Automatic flush bolt 26 HZ 9 aluminium-doors Automatic flush bolt 27 HZ 9 series 25 mm - Automatic flush bolt 28 HZ 10 for wooden doors Manual flush bolt 30 HZ 10 series 20 mm - Automatic flush bolt discontinued! 31 HZ-A 11 for rebated Automatic flush bolt discontinued! 31 HZ-B 11 wooden doors Automatic flush bolt 31 HZ-C 11 series 18 mm Automatic flush bolt 34 HZ 12 Semi-automatic flush bolt 35 HZ 12 Automatic flush bolt 37 HZ 13 Adjustable lock plate 19 HZ 13 series 16 mm Automatic flush bolt 39 HZ 14 series 33 HZ Automatic flush bolts 33 HZ-10F / 30F 15 series 33 HZ R32 Automatic flush bolt 33 HZA-R32F 16 Manual flush bolt 33 HZM-R32 16 43 HZ & 33 HZM Automatic flush bolt 43 HZ-32T 17 Manual flush bolt 33 HZM-32 17 Automatic flush bolt 43 HZ-20T 18 Guide- and lock-tubes - for flush bolts 18 100 HZA Automatic flush bolt 100 HZA 19 accessories Dust excluding floor sockets 17 / 18 HZ 20 special Laser marking of OLDA original products 21 info How to choose the right type of flush bolt? 22 General conditions Warranty, returns and conditions 23
Market The products are in their various designs intended for locksmiths and installation engineers, manufacturers and assemblers of door-sets. Excellent relations over several years with different European co-operation partners bear witness to the company s technical expertise and high level of service. When developing new products, our starting-point is the individual customer or the needs and demands from the market. Flexibility and experience is essential to satisfy the special requirements of customers. Information Distribution In Sweden, sales is carried out by our nation-wide wholesalers. Export sales follows, for each market, national traditions. Function All products are delivered with those accessories that are needed for a correct installation and function. The purpose of recommended accessories is to secure a correct function with a longer durability. The durability is effected by the use and environment which is different from case to case, recommended interval of service is therefore regulated by these factors. Maintenance and Service Several factors effect the function of the door, the door-set and its fittings requires regular preventive maintenance. In general, at fittings with movable components, maintenance should be carried out at least two times per year. If the door-set is located in an official space with high traffic, a more frequent service is recommended. When testing the function of movable parts, greasing is recommended. Approval Fittings are tested for approval according to different standards and norms, but in the end it is always the customer who approves if the product fulfil the needs and demands in question. Work is being carried out to adapt national standards into European standards. To be able to CE-mark a product, a EU standard also needs to be harmonized, which currently the standard for flush bolts is not. Countries in which you can find products from RZ Olda Innovation AB : Austria Belgium Czech Republic Denmark Estonia Finland France Germany Hungary Iceland Ireland Netherlands Norway Poland Portugal Slovakia Spain Sweden Switzerland United Kingdom Terms and conditions See page 23. Questions Please contact us at RZ Olda Innovation AB for further information: 4 tel: +46-(0)31-26 68 92 e-mail: fittings@olda.com web: www.olda.com
Opening limiters & Frame bridge Opening limiter OLDA 73 DS Fitted on hinge side at the top of the door frame. Fastening function is obtained with accessory 77 DA. Suits both left- and right-hung door-leaves. Colour / Art.No: white : 471014173/WT grey : 471014173/GR frame Length: Door leaf width: 185 mm max 930 mm door leaf Adjustable opening angle: 90-130 opening angle: 90 100 115 A-measurement: +45 +22-10 to the centre of the hinge screws are included Door fastener OLDA 77 DA Accessory for 73 DS, when fastening function is required. Fitted on the door leaf. Colour / Art.No: white : 471014277/WT grey : 471014277/GR Suits both left- and right-hung door-leaves. 77 DA is equipped with a rubber wheel with steel core, which results in an elastic performance with a longer durability. Holding force: approx. 25 Nm screws are included Door buffer OLDA 94 DS Fitted on wall or floor. For inside, side hung or sliding doors. Colour: white : 471014194/WT grey : 471014194/GR screws are included Frame bridge OLDA 71 KPF For concealed drawing of electric cable from frame to door leaf. & zinc Coating: galvanized Art.No: 471014871 Diameter of cable: max Ø 6 mm Including return spring! Not recommended together with high hinges. screws are included 5
Door coordinators and accessories Function of door coordinator devices on double-leaf door-sets: * the active door-leaf is prevented from closing by the lock-head of the coordinator * hence, the passive door-leaf closes first * and the coordinator releases the active door-leaf * and both the door-leaves have been closed in the correct order. active door-leaf: the door-leaf normally used for passage passive door-leaf: the door-leaf normally not used for passage Door coordinator OLDA 25 DK Prevents the door-leaves at double-leaf door-sets from closing in the incorrect order. 25 DK is fitted on the top of the frame and suits both left- and right-hung door-leaves. Colour / Art.No: white : 471014425/WT grey : 471014425/GR Door coordinator OLDA 30 DK-850/1150 Prevents the door-leaves at double-leaf door-sets from closing in the incorrect order. 30 DK suits both left- and right-hung door-leaves and is fitted under the top of the frame or with accessory 31 DK on the rear side of the top of the frame. The coordinator is available in two lengths (see chart). Depth: 40 mm. Height: 20 mm. Improved product! - Now with spring-loaded lock-head. Colour/Coating alt. 1: grey Art.No: 471014430-850/GR 471014430-1150/GR Colour/Coating alt. 2: galvanized Art.No: 471014430-850/GALV 471014430-1150/GALV chart for choice of length of coordinator: for frame-width up to (mm) : 1530 2130 -responds to frame module : 16 M 22 M choose coordinator (with A-measurement ) : 850 1150 approx. total length of product : 950 1250 strike bracket, support bracket and screws are included protection plates for door-leaves and screws are included additional profile Additional profile DK Used to extend the coordinator (up to 1 meter) to the cover the full frame width. Colour/Coating alt. 1: Colour/Coating alt. 2: grey Art.No: 471014439/GR galv. Art.No: 471014439/GALV Bracket OLDA 31 DK Accessory when coordinator 30 DK is fitted on the rear side of the frame. 6 Material / Coating: aluminium / anodized Art.No: 471014431 bracket frame coordinator
Door handles Sliding door fittings We are proud to now also be able to offer fittings for sliding doors. In this series is a ring handle, 85 PM and a cover for lock handles, 86 PM - both for recessed fitting. Flush ring handle OLDA 85 PM 11,5 2 For sliding doors. 85 PM is for recessed fitting. Is delivered with a pre-fitted carrier shaft, 8x8 mm, for connection to a lock. 8x8 Ø15 Ø60 Art.No: 471014785 68,5 56 56 68,5 screws are included Flush lock handle cover OLDA 86 PM 19 2 Ø43 Ø60 For sliding doors. 86 PM is fitted recessed, together with a suitable lock handle. 68,5 56 Art.No: 471014786 56 68,5 screws are included 7
8 Guide - OLDA flush bolts for different types of doors. There are many different type of doors, with regards to function, material and design. Below you can find a chart which gives guidance in the choice of OLDA flush bolt. OLDA flush bolts OLDA 26 HZ OLDA 27 HZ OLDA 28 HZ OLDA 30 HZ OLDA 31 HZ-A OLDA 31 HZ-B OLDA 31 HZ-C OLDA 34 HZ OLDA 35 HZ OLDA 37 HZ OLDA 39 HZ OLDA 33 HZ-10F OLDA 33 HZ-30F OLDA 33 HZA-R32F OLDA 33 HZM-R32 door material OLDA 43 HZ-32T OLDA 33 HZM-32 OLDA 43 HZ-20T OLDA 100 HZA suitable for wooden doors suitable for steel profiles suitable for aluminium profiles manual function semi automatic automatic bolt backset 21-66 40 12 12 10 10 10 11 3-19 3-19 11 10 30 32 32 32 32 20 - bolt Ø 44x10 12 10 10 10 10 12 12 15x17 15x17 10 12 12 12 12 12 12 12 14 bolt bolt not spring loaded (T) bolt spring loaded (F) ( ) bolt adjustable height bolt in stainless steel forend round forend / dimensions forend square forend width 25 25 25 25 20 20 20 18 18 18 16 24 24 22 22 22 22 24 24 forend height 78 98 168 168 160 160 160 190 190 190 188 193 193 200 200 200 200 200 136 forend thickness 2,5 2,5 2 2 2 2 2 3 3 3 3 2 2 2 2 2 3 2 2,5 forend depth 88 40 50 50 50 50 product depth / fits in profile depth 68 50 20 20 20 20 20 23 23 23 23 20 20 42 40 40 40 36 42
Fitted as a locking device on double-leaf door-sets on the passive door-leaf. (The passive door-leaf is the one normally not used for passage.) Manual flush bolt Both release and locking of the passive door-leaf is made manually. All our manual flush bolts is operated by a lever-mechanism. Automatic flush bolt Release of passive door-leaf is done automatically, when the active door-leaf is opened, and the falling latch is released. Locking is obtained automatically when active door-leaf closes, when the falling latch is pushed in and thereby activates the bolt. Automatic flush bolts is often recommended where fire-proof demands exists. Semi-automatic flush bolt Release of passive door-leaf is done manually. Locking is obtained automatically when passive door-leaf closes. The bolt is constantly activated, which means that this flush bolt can only be fitted at the top of the passive door-leaf. Recommended as a complementary product where an automatic flush bolt is installed at the bottom of the passive door-leaf. This installation results in an easy made manual releasing sequence and a secure locking sequence in two steps, which also contributes to a smoother closing of the door-set. Recommended accessory for our flush bolts: Dust-excluding floor socket 17 HZ (see page 20). Automatic flush bolt OLDA 26 HZ Automatic locking sequence of passive door-leaf. Recessed fitting up and/or down in passive doorleaf made of steel- or aluminium-profiles without joint-edge. Falling latch is reversible but is ordered pre-assembled left or right - see page 22. Width of the product is 25 mm. 26 HZ is not equipped with spring-loaded function Art.No: type 1 (L) 471014426-1 type 2 (R) 471014426-2 Also available in acid proof stainless steel! - please contact us! strike-plate, lock-plate and screws are included Automatic flush bolt OLDA 27 HZ Automatic locking sequence of passive door-leaf. Recessed fitting up and/or down in passive door-leaf made of steel- or aluminium-profiles with or without joint-edge. Fits in profile with depth 50 mm. Falling latch is reversible but is ordered preassembled left or right - see page 22. Width of the product is 25 mm. The bolt (Ø=12 mm) is vertically adjustable and is not equipped with spring-loaded function. Art.No: type 1 (L) 471014427-1 type 2 (R) 471014427-2 The flush bolt on the picture are type 1 strike-plate, guide- & lock-tube and screws are included The flush bolt on the picture are type 2 9
Flush bolt Series 25 mm (width of lock-pillar) The flush bolts in this series are mainly designed for wooden double-leaf door-sets. Both flush bolts have the same measurements (25 x 20 x 168 mm), which means that they fit the same cut-out in a door-leaf. This series consists of the automatic flush bolt 28 HZ and the manual 30 HZ. Accessory: Dust-excluding floor socket 17 HZ (see page 20). The falling latch on several of our automatic flush bolts are our patented, low-friction latch which considerably decreases the force needed when the door-set is closing. It is the 28 HZ, series 31 HZ, series 33 HZ, 34, 37 and 39 HZ which are equipped with this latch. Automatic flush bolt OLDA 28 HZ Automatic locking sequence of passive door-leaf. Recessed fitting up and/or down in passive doorleaf made of wood. The bolt (Ø=10 mm) is not equipped with a spring-loaded function and is vertically adjustable. The width of the product is 25 mm. Falling latch is not reversible, see illustration on page 22. Art.No: type 1 (L) 47101428-1 type 2 (R) 47101428-2 The flush bolt on the picture are type 1 strike-plate, lock-plate and screws/nails are included Manual flush bolt OLDA 30 HZ Manual locking sequence of passive door-leaf. Recessed fitting up and/or down in passive doorleaf made of wood. The bolt (Ø=10 mm) is vertically adjustable. The width of the product is 25 mm. Art.No: 47101430 10 lock-plate and screws are included
Series 20 mm (width of lock-pillar) - 31 HZ This series consists of three automatic flush bolts, mainly designed for rebated double-leaf door-sets made of wood. They all have the same measurements (20x20x160 mm.) but are designed for different cut-outs and fitting. Accessory: Dust-excluding floor socket 17 HZ (see page 20). Automatic flush bolt OLDA 31 HZ-A Automatic locking sequence of passive door-leaf. Recessed fitting up and/or down in passive doorleaf (also rebated), made of wood. 31 HZ-A is designed for a cut-out made with an end-cutter. The bolt (Ø=10 mm) is not equipped with a spring-loaded function and is vertically adjustable. The width of the product is 20 mm. Falling latch is not reversible, see illustration on page 22. Art.No: type 1 (L) 47101431-1A type 2 (R) 47101431-2A Automatic flush bolt OLDA 31 HZ-B Automatic locking sequence of passive door-leaf. Recessed fitting up and/or down in passive doorleaf (also rebated), made of wood. 31 HZ-B is designed for a cut-out made with an side-milling cutter. The bolt (Ø=10 mm) is not equipped with a spring-loaded function and is vertically adjustable. The width of the product is 20 mm. Falling latch is not reversible, see illustration on page 22. Art.No: type 1 (L) 47101431-1B type 2 (R) 47101431-2B strike-plate, lock-plate and screws/nails are included The flush bolt on the picture are type 1 discontinued strike-plate, lock-plate and screws/nails are included The flush bolt on the picture are type 1 discontinued Automatic flush bolt OLDA 31 HZ-C Automatic locking sequence of passive door-leaf. Recessed fitting up and/or down in passive doorleaf (also rebated), made of wood or steel- or aluminium-profiles without joint-edge. 31 HZ-C is designed for a cut-out made with an end-cutter. The bolt (Ø=12 mm) is equipped with a springloaded function and is not vertically adjustable. The width of the product is 20 mm. Falling latch is not reversible, see illustration on page 22. Art.No: type 1 (L) 47101431-1C type 2 (R) 47101431-2C strike-plate, lock-plate and screws/nails are included The flush bolt on the picture are type 1 11
12 Series 18 mm (width of lock-pillar) This series consists of three flush bolts, mainly intended for rebated double-leaf door-sets made of wood, steel- or aluminium-profiles without joint-edge. The flush bolts have the same measurements (18x23x190 mm), which means that they all fit the same cut-out in a door-leaf, made with and end-cutter. Accessory for 34 HZ : Dust-excluding floor socket 17 HZ (see page 20). New product in the series: 37 HZ - for improved safety! (See next page.) Automatic flush bolt OLDA 34 HZ Automatic locking sequence of passive door-leaf. Recessed fitting up and/or down in passive doorleaf. The bolt (Ø=12 mm) is equipped with a spring-loaded function. The width of the product is 18 mm. Falling latch is not reversible, see illustration on page 22. Art.No: type 1 (L) 47101434-1 type 2 (R) 47101434-2 strike-plate, lock-plate and screws/nails are included The flush bolt on the picture are type 2 Semi-automatic flush bolt OLDA 35 HZ The reversible bolt (17x15 mm) is always activated, which means that this flush bolt only can be fitted at the top in the passive door-leaf. Recommended as a complementary product, where automatic flush bolt 34 HZ, has been fitted at the bottom in the passive door-leaf. The width of the product is 18 mm. Art.No: type 1 (L) 47101435-1 type 2 (R) 47101435-2 35 HZ is ordered pre-assembled as type 1 or type 2 - see page 22. For more information about the semiautomatic function, please see page 9. Lock-plate and screws are included The flush bolt on the picture are type 1 accessory: protective plate (recommended for wooden doors)
13 Series 18 mm (width of lock-pillar) This series consists of three flush bolts, mainly intended for rebated double-leaf door-sets made of wood, steel- or aluminium-profiles without joint-edge. The flush bolts have the same measurements (18x23x190 mm), which means that they all fit the same cut-out in a door-leaf, made with and end-cutter. New products in the series: 37 HZ - for improved safety! and the recommended accessory: 19 HZ - adjustable lock plate. See previous page for the other products in this series! Automatic flush bolt OLDA 37 HZ Automatic locking sequence of passive door-leaf. Recessed fitting up and/or down in passive doorleaf. The bolt (17x15 mm) is not equipped with a spring-loaded function. The width of the product is 18 mm. Falling latch is not reversible, see illustration on page 22. 25 17 50 This flush bolt facilitates easier opening of double doors at emergency escapes, by reducing the friction between the bolt and frame or lock plate. Additionally it has a hold close function which is desired for fire, smoke and soundproof doors. Art.No: type 1 (L) 47101437-1 type 2 (R) 47101437-2 Adjustable lock plate OLDA 19 HZ Recommended accessory for 37 HZ. Recessed fitting in frame or sill/floor. This lock plate is adjustable after fitting, which is especially useful on large or older doors, but it also contributes to the hold close function of flush bolt 37 HZ. Art.No: 471014419 Customized shape of the receiving hole, for different bolts is possible. 37 HZ 40 60 The flush bolt on the picture are type 2 19 HZ strike plate and screws/nails are included screws are included
14 Flush bolt 39 HZ - 16 mm (width of lock-pillar) Mainly intended for rebated double-leaf door-sets made of wood, steelor aluminium-profiles without joint-edge. Dimensions: (16x23x190 mm). Accessory for 39 HZ : Dust-excluding floor socket 17 HZ (see page 20). New product! To meet the demand, mainly from manufacturers of aluminium-, and PVC-door profiles and also rebated doors, OLDA has developed a new product with only 16 mm forend width. Automatic flush bolt OLDA 39 HZ Automatic locking sequence of passive door-leaf. Recessed fitting up and/or down in passive doorleaf. The bolt (Ø=10 mm) is equipped with a spring-loaded function. The width of the product is 16 mm. Falling latch is not reversible, see illustration on page 22. Art.No: type 1 (L) 47101439-1 type 2 (R) 47101439-2 strike-plate, lock-plate and screws/nails are included The flush bolt on the picture are type 1
15 Series 33 HZ These automatic flush bolts, are mainly designed for double-leaf door-sets made of steel- or aluminium-profiles. In this series are flush bolts with two different depths (back-set) of the bolt, 10 mm and 30 mm. The forend, with dimensions 24 x 193 mm, are in brushed stainless steel. Accessory: Dust-excluding floor socket 17 HZ (see page 20). Automatic flush bolt OLDA 33 HZ-10F Automatic locking sequence of passive door-leaf. Recessed fitting up and/or down in passive door-leaf made of steel or aluminium without joint-edge. The bolt (Ø=12 mm) is placed 10 mm from the back of the forend, is equipped with a spring-loaded function and is vertically adjustable. Falling latch is not reversible, see illustration on page 22. Material: Coating: Art.No: steel / stainless steel (forend) zinc plated type 1 (L) 47101433-1/10F type 2 (R) 47101433-2/10F At reasonable order volumes, these products are available without the spring-loaded function - please contact us for further information! strike plate, lock tube and screws are included The flush bolt on the picture are type 2 20 20 22 15 149 88 10 Ø 22 Ø 12,5 15 Automatic flush bolt OLDA 33 HZ-30F Automatic locking sequence of passive door-leaf. Recessed fitting up and/or down in passive door-leaf made of steel or aluminium with or without joint-edge. The bolt (Ø=12 mm), is placed 30 mm from the back of the forend, is equipped with a spring-loaded function and is vertically adjustable. Falling latch is not reversible, see illustration on page 22. Material: Coating: Art.No: steel / stainless steel (forend) zinc plated type 1 (L) 47101433-1/30F type 2 (R) 47101433-2/30F At reasonable order volumes, these products are available without the spring-loaded function - please contact us for further information! strike plate, guide tube, lock tube and screws are included 20 20 22 15 15 149 88 30 Ø 22 The flush bolt on the picture are type 1
16 Series 33 HZA/M-R32 This series of flush bolts, are mainly designed for double-leaf door-sets made of wood, steel- or aluminium-profiles. Both products can fit in the same cut-out. An extended bolt (Ø12x60) makes these products prepared to work with automatic drop seals. Bolts are also available in, for example, Ø8 and Ø10 mm. The forend, with dimensions 22 x 200 mm, are made of brushed stainless steel and have round corners. Accessory: Dust-excluding floor socket 17 HZ (see page 20). Automatic flush bolt OLDA 33 HZA-R32F Automatic locking sequence of passive door-leaf. Recessed fitting up and/or down in passive door-leaf made of wood, steel- or aluminiumprofiles. The bolt (Ø=12x60 mm) is placed 32 mm from the back of the forend, is equipped with a spring-loaded function and is vertically adjustable. Falling latch is not reversible, see illustration on page 22. Material: Coating: Art.No: steel / stainless steel (forend) zinc plated type 1 (L) 47101433-1/R32F type 2 (R) 47101433-2/R32F At reasonable order volumes, this product is available without the spring-loaded function - please contact us for further information! Manual flush bolt OLDA 33 HZM-R32 This manual flush bolt, operated by a lever, has the same areas of use as 33 HZA-R32F. 33 HZM-R32 can be used as a manual complement to that product. The bolt (Ø=12x60 mm) is placed 32 mm from the back of the forend and is vertically adjustable. Material: Coating: Art.No: steel / stainless steel (forend) zinc plated 47101433/R32M At reasonable order volumes, this product is available with the bolt at a different depth (back-set), (for example 10 or 20 mm instead of 32 mm) - please contact us for further information! guide tube, lock tube and screws are included strike plate, guide tube, lock tube and screws are included The flush bolt on the picture are type 1
17 43 HZ & 33 HZM This series of flush bolts, is mainly intended for double-leaf door-sets made of wood, steel- or aluminium-profiles. The automatic 43 HZ-32T and the manual 33 HZM-32 can fit in the same cut-out. Accessory: Dust-excluding floor socket 17 HZ (see page 20). Automatic flush bolt OLDA 43 HZ-32T For automatic locking sequence of passive doorleaf on double-leaf door-sets made of wood, steel- or aluminium-profiles. Recessed fitting up and/or down in passive door-leaf. The bolt (Ø12 mm) is placed 32 mm from the back of the forend, is not equipped with a springloaded function and is vertically adjustable. 43 HZ has a reversible latch but is ordered preassembled left or right - see page 22. Art.No: type 1 (L) 47101443-1 type 2 (R) 47101443-2 Also available in a version where the forend has round corners and the bolt back-set is 20 mm. - see next page. At reasonable order volumes, this product is available with a spring-loaded function - please contact us for further information! strike plate, guide tube, lock tube and screws are included The flush bolt on the picture are type 2 200 70 22 2 Ø12 40 20 20 20 15 15 160 88 32 Ø 22 Manual flush bolt OLDA 33 HZM-32 This manual flush bolt, operated by a lever, has the same areas of use as 43 HZ. 33 HZM can be used as a manual complement to that product. The bolt (Ø=12 mm) is placed 32 mm from the back of the forend and is vertically adjustable. Art.No: 47101433/32M At reasonable order volumes, this product is available with the bolt at a different depth (back-set), (for example 10 or 20 mm instead of 32 mm) - please contact us for further information! guide tube, lock tube and screws are included 200 70 22 3 Ø12 40 20 20 20 10 10 170 83 32 Ø 22
18 Flush bolt 43 HZ-20T This series of flush bolts, is mainly intended for double-leaf door-sets made of wood, steel- or aluminium-profiles. Accessory: Dust-excluding floor socket 17 HZ (see page 20). Automatic flush bolt OLDA 43 HZ-20T For automatic locking sequence of passive doorleaf on double-leaf door-sets made of wood, steel- or aluminium-profiles. Recessed fitting up and/or down in passive door-leaf. The bolt (Ø12 mm) is placed 20 mm from the back of the forend, is not equipped with a springloaded function and is vertically adjustable. 43 HZ has a reversible latch but is ordered preassembled left or right - see page 22. Material: Coating: Art.No: steel zinc plated type 1 (L) 47101443-1/20T type 2 (R) 47101443-2/20T Also available in a version where the forend has straight corners and the bolt back-set is 32 mm - see previous page. strike plate, guide tube, lock tube and screws are included The flush bolt on the picture are type 1 TFXH 3,5 x 16 (2x) DIN7982 FXS 4,2 x 16 (2x) 200 70 Ø12 40 20 20 20 20 20 15 15 160 88 TFXH 3,5 x 16 (3x) Ø 22 At reasonable order volumes, this product is available with a spring-loaded function - please contact us for further information! 24 55 2 2 Guide tubes and Lock tubes Ø22 18 Accessory for flush bolts intended for doors mainly made of aluminium- or steel-profiles. 22 22 When necessary, the guide tube (circular hole) can be fitted in the door-leaf and the lock tube (oval hole) in the frame/sill. Material: Coating: zinc zinc plated A W x H Art.No: 14436-00 A = Ø 10,5 Art.No: 14435-00 W=13 H=17 Art.No: 14435-90 W=17 H=13 Art.No: 14439-00 A = Ø 12,5 Art.No: 14437-00 W=11 H=15 Art.No: 14437-90 W=15 H=11 Art.No: 14445-00 A = Ø 14,5 Art.No: 14444-00 W=15 H=17 Art.No: 14444-90 W=17 H=15
45 38,5 19 Frame bolt 100 HZA - Next generation OLDA automatic flush bolts In door systems with demanding fire proof requirements, a flush bolt can sometimes weaken the fire resistance to an undesired extent. Beacuse of this, OLDA has developed 100 HZA which is fitted in the door frame above the door leaves. It works like a regular flush bolt, the active door activates a latch which bolts the already closed passive door. Minimal cut-out in the passive door leaf and easy fitting are some of the advantages. The flush bolt on the picture are type 1 Automatic flush bolt OLDA 100 HZA For automatic locking sequence of passive doorleaf on double-leaf door-sets made of steel- or aluminium-profiles. Fitting in the frame above the door-leaves. The bolt (Ø14 mm) is not equipped with a springloaded function and is vertically adjustable. 100 HZA has a reversible latch but is ordered preassembled as type 1 or type 2 - see page 22. New product! Art.No: type 1 (L) 471014100-1 type 2 (R) 471014100-2 strike plate, lock tube and screws are included 20 100 To receive an additional locking point in the bottom of the door leaf, an automatic flush bolt OLDA 27 HZ, 33 HZ, 34 HZ or 43 HZ could be used. 24 136
Dust-excluding floor socket OLDA 17 HZ Recommended accessory for door-sets with high frequency of passage. Where a flush bolt is fitted in the bottom of the door-leaf, 17 HZ prevents dust and grit from blocking a correct locking sequence. This version of the 17 HZ has a spring-loaded opening with diameter 13 mm. Floor sockets Ø18 Ø13 35 360, stainless steel spring Art.No: 471014417 20 screws are included Dust-excluding floor socket OLDA 17 HZ-R Ø45 2,5 Recommended accessory for door-sets with high frequency of passage. Where a flush bolt is fitted in the bottom of the door-leaf, 17 HZ-R prevents dust and grit from blocking a correct locking sequence. These versions of the 17 HZ have a spring-loaded opening with diameter 13 mm or 16 mm and are made of stainless steel. Material: Art.No: stainless steel, stainless steel spring 471014417-13R (Ø13) 471014417-16R (Ø16) screws are included 45 Ø20 alt. Ø16 Ø16 alt. Ø13 Adjustable dust-excluding floor socket OLDA 18 HZ 2 This product is especially suitable for when there could arise a need for adjustment of the position of the hole, after fitting, for example if the shape of the door changes by time. But also to facilitate the fitting in for example fragile or expensive materials where possible incorrect fitting and necessary re-fitting, of a traditional floor socket, would leave visible damage to the floor/sill. Recommended accessory for door-sets with high frequency of passage. Where a flush bolt is fitted in the bottom of the door-leaf, 18 HZ prevents dust and grit from blocking a correct locking sequence. 18 HZ has a spring-loaded opening with diameter 13 mm. Patent applied product! 20 Art.No: 471014418 Ø28 42 Ø13 Ø22 hole Ø13 adjustable within diameter Ø22 fit with appropriate joining compound
Special Laser marking To make it easier to identify an OLDA product, we have decided to begin gradually to mark our products. For this, we have constructed a special equipment for laser marking. Warning for illegal copies of our products! It has emerged copies of inferior quality, both locally and in the rest of Europe. Most original OLDA flush bolts is today marked with our logo, product name (i.e. 28 HZ) and manufacturing year. Please feel free to contact us if you wish to be sure that you are dealing with OLDA original products! Extended bolts When flush bolts are fitted in door sets where different mouldings or sills demand a certain distance between door-leaf and frame, an extended bolt can often be the solution. Please contact us! Customized solutions and prototypes When our larger customers require special solutions for a certain project or door system, we often ask our own CNC experts for their services. They have the latest CAM-technology available to them. This department within Olda Innovation AB have many years experience of developing prototypes and smaller production series for the automotive industry etc. Quality and environment At Olda Innovation, quality and environment issues are always included as a natural component in the production process. We are certified according to ISO 9001:2008 and ISO 14001:2004 The pictures to the left are showing a part of the welding department and the fittings assembly department. 21
22 How to choose the right type of flush bolt? OLDA automatic and semi-automatic flush bolts are ordered and fitted according to the following: left door-leaf is passive: 2 1 Choose flush bolt type2 for top fit and type1 for bottom fit. right door-leaf is passive: 1 2 Choose flush bolt type1 for top fit and type2 for bottom fit. The passive door-leaf is the one normally not used for passage. (The bolt on flush bolts OLDA 26 HZ, 27 HZ, 35 HZ, 43 HZ and 100 HZA are possible to reverse direction of, before fitting. But most customers prefer to receive the desired version at delivery.) (Note: In the past we have called type1 for left and type2 for right.)
23 General conditions Quality Precision-cast steel components, manufacturing according to explicit limit of tolerance, skilled personnel and rigorous testing, ensures that our products meets the demands from customers and authorities considering function, durability and life cycle. Flexibility Our strength is based on flexibility. As a manufacturer we can offer our large quantity customers different solutions concerning the construction of our products. An other example is that we can offer several coatings or RAL-colours according to request. Service RZ OLDA Innovation AB recommends test of function and system 1-2 times per year. In high frequency areas, demanding environments or when specific requirements exists, testing should be carried out more frequently. Test, lubricate and if necessary adjust movable parts. Warranty All mechanical products includes 3 years warranty from the date of issuance of invoice in question. Packing Terms of delivery and payment Prices Where no instruction for packaging has been specified, all products are packaged separately, with mounting instructions and including accessories, in plastic bags or in boxes. All products are delivered with EAN-code. See current price list. RZ OLDA Innovation AB s business concept is to offer high quality fittings with unique functions at reasonable prices. Further information regarding prices are obtained through our current price list. Return of goods Return of goods has to be approved by RZ OLDA Innovation AB. For approval, returned products has to be in intact condition, with all included accessories packaged in the unopened original packing. Amount for approved returned goods are deducted with 25% in credit. Return after due day of invoice is not accepted. Product development We are continuously developing our products to further improve quality, durability and function. Furthermore, new products are introduced on a regular basis to meet the demand of the market. This means we have to reserve ourselves for the possibility that the product range and technical data regarding the products might change.
www.olda.com