OPTI-502 Optical Design and Instrumentation I John E. Greivenkamp Homework Set 5 Fall, 2018

Similar documents
h = v h 2 = height of the object is negative for inverted image and positive for erect image. is always positive. Direction of incident light

Geometric Optics Practice Problems. Ray Tracing - Draw at least two principle rays and show the image created by the lens or mirror.

Assignment X Light. Reflection and refraction of light. (a) Angle of incidence (b) Angle of reflection (c) principle axis

Converging Lenses. Parallel rays are brought to a focus by a converging lens (one that is thicker in the center than it is at the edge).

Optics Practice. Version #: 0. Name: Date: 07/01/2010

IMAGE ILLUMINATION (4F 2 OR 4F 2 +1?)

Final Reg Optics Review SHORT ANSWER. Write the word or phrase that best completes each statement or answers the question.

BHARATIYA VIDYA BHAVAN S V M PUBLIC SCHOOL, VADODARA QUESTION BANK

OPTI-202R Geometrical and Instrumental Optics John E. Greivenkamp Final Exam Page 1/11 Spring 2017

2. The radius of curvature of a spherical mirror is 20 cm. What is its focal length?

Chapter 36. Image Formation

LIGHT REFLECTION AND REFRACTION

Ch 24. Geometric Optics

Geometric Optics. Ray Model. assume light travels in straight line uses rays to understand and predict reflection & refraction

MODERN OPTICS -1. Tutorial Solutions

Directional Derivative, Gradient and Level Set

Class-X Assignment (Chapter-10) Light-Reflection & Refraction

Chapter 2 - Geometric Optics

Physics Worksheet. Topic -Light. Q1 If the radius of curvature of spherical mirror is 20 cm, what is its focal length.

School of Electrical and Computer Engineering, Cornell University. ECE 303: Electromagnetic Fields and Waves. Fall 2007

P202/219 Laboratory IUPUI Physics Department THIN LENSES

Indirect Measurement

LLT Education Services

REFLECTION THROUGH LENS

Algebra Based Physics. Reflection. Slide 1 / 66 Slide 2 / 66. Slide 3 / 66. Slide 4 / 66. Slide 5 / 66. Slide 6 / 66.

Determination of Focal Length of A Converging Lens and Mirror

28 Thin Lenses: Ray Tracing

Condition Mirror Refractive Lens Concave Focal Length Positive Focal Length Negative. Image distance positive

Optics: Lenses & Mirrors

Practice Problems (Geometrical Optics)

Making Images with Lenses and Mirrors

University of Rochester Department of Physics and Astronomy Physics123, Spring Homework 5 - Solutions

Refraction by Spherical Lenses by

Physics 132: Lecture Fundamentals of Physics II

WAVES: REFLECTION QUESTIONS

Algebra Based Physics. Reflection. Slide 1 / 66 Slide 2 / 66. Slide 3 / 66. Slide 4 / 66. Slide 5 / 66. Slide 6 / 66.

Chapter 3 Mirrors. The most common and familiar optical device

Gaussian Ray Tracing Technique

Physics 197 Lab 7: Thin Lenses and Optics

Lecture 19 (Geometric Optics I Plane and Spherical Optics) Physics Spring 2018 Douglas Fields

3. What kind of mirror could you use to make image distance less than object distance?

Physics 228 Lecture 3. Today: Spherical Mirrors Lenses.

Chapter 34 Geometric Optics

Physics 132: Lecture Fundamentals of Physics

Area of the Secondary Mirror Obscuration Ratio = Area of the EP Ignoring the Obscuration

NORTHERN ILLINOIS UNIVERSITY PHYSICS DEPARTMENT. Physics 211 E&M and Quantum Physics Spring Lab #8: Thin Lenses

always positive for virtual image

INDIAN SCHOOL MUSCAT SENIOR SECTION DEPARTMENT OF PHYSICS CLASS X REFLECTION AND REFRACTION OF LIGHT QUESTION BANK

Experiment 3: Reflection

E X P E R I M E N T 12

Option G 2: Lenses. The diagram below shows the image of a square grid as produced by a lens that does not cause spherical aberration.

Image Formation. Light from distant things. Geometrical optics. Pinhole camera. Chapter 36

Physics 132: Lecture Fundamentals of Physics II

Unit 5.B Geometric Optics

PHYSICS 289 Experiment 8 Fall Geometric Optics II Thin Lenses

Gaussian Ray Tracing Technique

Mirrors, Lenses &Imaging Systems

PHYS 160 Astronomy. When analyzing light s behavior in a mirror or lens, it is helpful to use a technique called ray tracing.

5.3 Sum and Difference Identities

mirrors and lenses PHY232 Remco Zegers Room W109 cyclotron building

Waves & Oscillations


Physics II. Chapter 23. Spring 2018

Physics 142 Lenses and Mirrors Page 1. Lenses and Mirrors. Now for the sequence of events, in no particular order. Dan Rather

Calculation of Antenna Pattern Influence on Radiated Emission Measurement Uncertainty

Chapter 23. Mirrors and Lenses

Astronomy 80 B: Light. Lecture 9: curved mirrors, lenses, aberrations 29 April 2003 Jerry Nelson

Light - Reflection and Refraction

ii) When light falls on objects, it reflects the light and when the reflected light reaches our eyes then we see the objects.

LIGHT REFLECTION AND REFRACTION

Notation for Mirrors and Lenses. Chapter 23. Types of Images for Mirrors and Lenses. More About Images

Tutorials in Opto-mechanics The calculation of focal length using the nodal slide

Waves & Oscillations

Reading: Lenses and Mirrors; Applications Key concepts: Focal points and lengths; real images; virtual images; magnification; angular magnification.

Spherical Mirrors. Concave Mirror, Notation. Spherical Aberration. Image Formed by a Concave Mirror. Image Formed by a Concave Mirror 4/11/2014

9. THINK A concave mirror has a positive value of focal length.

LECTURE 17 MIRRORS AND THIN LENS EQUATION

Your Comments. That test was brutal, but this is the last physics course I have to take here WOOOOOO!!!!!

Section 3. Imaging With A Thin Lens

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

Physics 222, October 25

3D Hole Inspection Using Lens with High Field Curvature

Complete the diagram to show what happens to the rays. ... (1) What word can be used to describe this type of lens? ... (1)

LENSES. A lens is any glass, plastic or transparent refractive medium with two opposite faces, and at least one of the faces must be curved.

Lecture 17. Image formation Ray tracing Calculation. Lenses Convex Concave. Mirrors Convex Concave. Optical instruments

Light: Lenses and. Mirrors. Test Date: Name 1ÿ-ÿ. Physics. Light: Lenses and Mirrors

PHYSICS OPTICS. Mr Rishi Gopie

Telescopes and Detectors

The hardest MC questions in optics. A guide for the perplexed

Physics 2310 Lab #5: Thin Lenses and Concave Mirrors Dr. Michael Pierce (Univ. of Wyoming)

2015 EdExcel A Level Physics EdExcel A Level Physics. Lenses

Section 3 Curved Mirrors. Calculate distances and focal lengths using the mirror equation for concave and convex spherical mirrors.

Chapter 24 Geometrical Optics. Copyright 2010 Pearson Education, Inc.

Practice problems for the 3 rd midterm (Fall 2010)


Chapter 23. Mirrors and Lenses

GEOMETRICAL OPTICS Practical 1. Part I. BASIC ELEMENTS AND METHODS FOR CHARACTERIZATION OF OPTICAL SYSTEMS

Laboratory 12: Image Formation by Lenses

UNIT SUMMARY: Electromagnetic Spectrum, Color, & Light Name: Date:

CH. 23 Mirrors and Lenses HW# 6, 7, 9, 11, 13, 21, 25, 31, 33, 35

Transcription:

Homework Set 5 all, 2018 Assigned: 9/26/18 Lecture 11 Due: 10/3/18 Lecture 13 Midterm Exam: Wednesday October 24 (Lecture 19) 5-1) Te following combination of tin lenses in air is in a telepoto configuration: f1 = 75 mm f2 = -60 mm Spacing = 35 mm Use Gaussian reduction to determine te focal lengt of te system, and te locations of te rear principal plane and te rear focal point. 5-2) A tick lens in air as te following specifications: R1 = 127 mm R2 = -77 mm TH = 17 mm n = 1.472 a) Wat is te focal lengt and power of tis lens? Were is te image of an object at infinity located wit respect to te rear vertex of te lens (te back focal distance)? b) Wat are te focal lengt, power and back focal distance if te index of te lens is canged to 1.853? c) Wat are te rear focal lengt, focal lengt, power and back focal distance if te original lens (n = 1.472) is immersed in water (n = 1.333)? Use Gaussian reduction for tis problem. 5-3) Use Gaussian reduction to determine te back focal distance of te following tree surface optical system: n = n 0 = 1.33 n 1 = 1.50 t 1 = 5.0 n 2 = 1.60 t 2 = 5.0 n' = n 3 = 1.33 R 1 = 25.0 R 2 = -40.0 R 3 = -60.0

Homework Set 5 all, 2018 5-4) Determine te Gaussian properties of a tick lens in air wit a first surface of radius R 1, a tickness t, an index n, and a second surface of radius R 2 suc tat: a) it is concentric wit te first surface. b) it as equal but opposite power from te first surface. c) te lens as ero power. or eac of tese tree cases, determine te Gaussian properties of te lens and sketc te locations of te cardinal points (, f, f R, P, P',, ', N, N'). 5-5) Using Gaussian reduction, determine te Gaussian properties of te following eye model. Dimensions are in mm. Te front of te eye is in air. Keep a copy of your answers for future use. n0 n1 n2 n3 t1 t2 r1 r2 r3 r t n 1 7.8 3.6 1.336 2 10.0 3.6 1.413 3-6.0 1.336 5-6) A concave mirror wit a radius of curvature of 100 mm is used to image a real object 200 mm away from its vertex. Were is te image and wat is te magnification? Work tis problem using te sign conventions of class. Note: You must put te above information into te proper sign convention. Don t expect your customer to know about sign conventions.

Homework Set 5 all, 2018 5-7) A mirror of curvature C is immersed in an index n. Wat is its power, and wat are te front and rear focal lengts? Wic depend on n, and wic do not? 5-8) A Gregorian objective is an all reflective system tat uses two concave mirrors: Radius 2 Radius 1 Spacing WD ' Radius 1 = 100 mm Radius 2 = 40 mm Spacing = 75 mm a) Use Gaussian reduction to determine te focal lengt and working distance (WD) for tis system. b) You sould ave found tat tis system as a negative power and focal lengt, yet it forms a real image. Explain tis result. Consider te ray pat for te ray for an object at infinity and te definitions of te cardinal points.

Homework Set 5 all, 2018 5-9) Two tick lenses in air are combined into a single imaging system. Bot lenses are 25 mm tick and bot lenses ave a focal lengt of 100 mm, owever te index of te first lens is 1.6 and te index of te second lens is 1.5. Te vertex-to-vertex spacing of te lenses is 50 mm. Te principal plane locations for te two individual lenses wit respect to surface vertices are sown in te figure. All units are in mm. f 1 = 100 t 1 = 25 n 1 = 1.6 f 2 = 100 t 2 = 25 n 2 = 1.5 R 1 R 1 9.38 P1 P 1-6.90 9.84 P2 P 2-7.58 NOTE: Only Gaussian metods may be used for tis problem. 50 a) Determine te Radii of Curvature of bot surfaces of te first lens (n 1 = 1.6). b) or te system comprised of te two tick lenses, determine: System ocal Lengt Location of te Rear Principal Plane of te system relative to te rear vertex of te second lens Back ocal Distance Location of te ront Principal Plane of te system relative to te front vertex of te first lens ront ocal Distance

Homework Set 5 all, 2018 5-10) A variety of imaging configurations are given, eac sowing an object. Determine te image location and sie by using a ray construction. Make use of te properties of te focal points. Bot real and virtual objects are sown. Indicate if te image is real or virtual. Concave Mirror: f f f

Homework Set 5 all, 2018 Convex Mirror: f f f