Matched Pairs of Emitters and Detectors TCZT82 96 237_ DESCRIPTION The TCZT82 include matched infrared emitters and phototransistors in leaded packages, used to assemble custom-designed transmissive sensors or reflective sensors. The phototransistor package blocks visible light. FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 4.4 x 2 x 3 Typical output current under test: I C =.5 ma Daylight blocking filter Emitter wavelength: 95 nm Angle of half intensity: = ± 25 S42P: single detector component (dark epoxy) V42P: single emitter component (clear epoxy) Lead (Pb)-free soldering released Compliant to RoHS Directive 22/95/EC and in accordance to WEEE 22/96/EC APPLICATIONS Custom-design sensors for various distances Reflective sensors Transmissive sensors PRODUCT SUMMARY PART NUMBER GAP WIDTH (mm) TYPICAL OUTPUT CURRENT UNDER TEST () (ma) DAYLIGHT BLOCKING FILTER INTEGRATED TCZT82 Variable.5 Yes Note () Conditions like in table basic characteristics/coupler ORDERING INFORMATION ORDERING CODE PACKAGING VOLUME () REMARKS TCZT82 Note () MOQ: minimum order quantity Bulk MOQ: 2 pairs, pcs/bulk Detectors and emitters in separate bulk ** Please see document Vishay Material Category Policy : www.vishay.com/doc?9992 Document Number: 83774 For technical questions, contact: sensorstechsupport@vishay.com www.vishay.com Rev..7, 5-Mar- This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TCZT82 Matched Pairs of Emitters and Detectors ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT COUPLER Ambient temperature range T amb - 55 to + 85 C Storage temperature range T stg - 55 to + C Soldering temperature Distance to package 2 mm, t 5 s T sd 26 C INPUT (EMITTER) Reverse voltage V R 6 V Forward current I F 6 ma Forward surge current t μs I FSM A Power dissipation T amb 25 C P V mw Junction temperature T j C OUTPUT (DETECTOR) Collector emitter voltage V CEO 7 V Emitter collector voltage V ECO 7 V OUTPUT (DETECTOR) Collector current I C 5 ma Collector peak current t p /T =.5, t ms I CM ma Power dissipation T amb 25 C P V 5 mw Junction temperature T j C ABSOLUTE MAXIMUM RATINGS P - Total Power Dissipation (mw) 2 8 6 Phototransistor 4 2 8 IR-diode 6 4 2 25 5 75 96 947 T amb - Ambient Temperature ( C) Fig. - Power Dissipation Limit vs. Ambient Temperature www.vishay.com For technical questions, contact: sensorstechsupport@vishay.com Document Number: 83774 2 Rev..7, 5-Mar- This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Matched Pairs of Emitters and Detectors TCZT82 BASIC CHARACTERISTICS (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT COUPLER Collector current V CE = 5 V, I F = 2 ma, d = 4 mm () I C.25.5 ma I C /I F V CE = 5 V, I F = 2 ma, d = 4 mm CTR.25 2.5 % Collector emitter saturation voltage I F = 2 ma, I C = 25 μa V CEsat.4 V Cut-off frequency I F = ma, V CE = 5 V, R L = f C khz INPUT (EMITTER) Forward voltage I F = 5 ma V F.25.6 V Radiant intensity I F = 6 ma, t P = 2 ms I e 7.8 mw/sr Peak wavelength I F = ma P 94 nm Virtual source diameter DIN EN ISO 46/:25 d. mm OUTPUT (DETECTOR) Collector emitter voltage I C = ma V CEO 7 V Emitter collector voltage I E = μa V ECO 7 V Collector dark current V CE = 25 V, I F = A, E = lx I CEO na SWITCHING CHARACTERISTICS Turn-on time V S = 5 V, I C = ma, R L = (see figure ) t on 5 μs Turn-off time V S = 5 V, I C = ma, R L = (see figure ) t off μs Note () Characteristics are measurement with d = 4 mm (.55") distance between emitter and detector, within a common axis of.5 mm (.2") and with parallel alignment within 5 BASIC CHARACTERISTICS (T amb = 25 C, unless otherwise specified) I F - Forward Current (ma) 96 862..4.8.2.6 2. V F - Forward Voltage (V) Fig. 2 - Forward Current vs. Forward Voltage Fig. 3 - Relative Current Transfer Ratio vs. Ambient Temperature CTR rel - Relative Current Transfer Ratio 2..5..5 95 97-25 25 V CE = 5 V I F = 2 ma d = 4 mm 5 T amb - Ambient Temperature ( C) 75 Document Number: 83774 For technical questions, contact: sensorstechsupport@vishay.com www.vishay.com Rev..7, 5-Mar- 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
TCZT82 Matched Pairs of Emitters and Detectors I CEO - Collector Dark Current (na) V CE = 25 V I F = A CTR - Current Transfer Ratio (%) V CE = 5 V d = 4 mm 95 9 25 5 75 T amb - Ambient Temperature ( C) Fig. 4 - Collector Dark Current vs. Ambient Temperature.. 95 4 Fig. 7 - Current Transfer Ratio vs. Forward Current I - Forward Current (ma) F I - Collector Current (ma) C.... 95 V CE = 5 V d = 4 mm I - Forward Current (ma) F t on /t off - Turn on/turn off Time (µs) 2 5 5 95 4 t on t off Non saturated operation V S = 5 V R L = Ω d = 4 mm 2 4 6 8 I C - Collector Current (ma) Fig. 5 - Collector Current vs. Forward Current Fig. 8 - Turn on/off Time vs. Forward Current d = 4 mm I C - Collector Current (ma)... 95 2 I F = 5 ma 2 ma ma 5 ma 2 ma V CE - Collector Emitter Voltage (V) Fig. 6 - Collector Current vs. Collector Emitter Voltage I - Collector Current (ma) C.. 95 5 V CE = 5 V I F = 2 ma T amb = 25 C 2 4 6 8 d - Distance (mm) Fig. 9 - Collector Current vs. Distance d www.vishay.com For technical questions, contact: sensorstechsupport@vishay.com Document Number: 83774 4 Rev..7, 5-Mar- This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Matched Pairs of Emitters and Detectors TCZT82 I F R G = 5 t p T =. t p = 5 µs 95 846 I F I F 5 + 5 V I C = ma; adjusted by IF Channel I Channel II Oscilloscope R L M C L 2 pf Fig. - Pulse Diagram Fig. - Switching Times I C % 9 % % t p t d t r t on (= t d + t r ) t r t p t d t on Pulse duration Delay time Rise time Turn-on time t s t f t off t s t f t off (= t s + t f ) t t Storage time Fall time Turn-off time 96 698 PACKAGE DIMENSIONS in millimeters Detector (black) Dimensions like emitter package Drawing-No.: 6.544-5284.-4 Issue: 2;..98 96 26 Document Number: 83774 For technical questions, contact: sensorstechsupport@vishay.com www.vishay.com Rev..7, 5-Mar- 5 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Packaging and Ordering Information Packaging and Ordering Information PART NUMBER MOQ () PCS PER TUBE Notes () MOQ: minimum order quantity (2) Please refer to datasheets TUBE SPECIFICATION FIGURES TUBE SPEC. (FIGURE) CONSTITUENTS (FORMS) CNY7 4 8 28 TCPT3X 2 Reel (2) 29 TCRT Bulk - 26 TCRT Bulk - 26 TCRT5 45 5 2 27 TCRT5L 24 48 3 27 TCST3 52 65 5 24 TCST3L 26 65 6 24 TCST3 2 85 4 24 TCST22 2 85 4 24 TCST23 48 6 7 24 TCST3 2 85 4 24 TCST23 2 85 4 24 TCST222 2 85 4 24 TCST23 2 85 4 24 TCST525 486 3 8 24 TCUT3X 2 Reel (2) 29 TCZT82-PAER 25 Bulk - 22 598 Fig. Document Number: 82 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com Rev.., 2-Jul-9
Packaging and Ordering Information Packaging and Ordering Information 52 Fig. 2 52 Fig. 3 www.vishay.com For technical questions, contact: optocoupleranswers@vishay.com Document Number: 82 2 Rev.., 2-Jul-9
Packaging and Ordering Information Packaging and Ordering Information 599 Fig. 4 Fig. 5 522 Document Number: 82 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com Rev.., 2-Jul-9 3
Packaging and Ordering Information Packaging and Ordering Information 596 Fig. 6 595 Fig. 7 www.vishay.com For technical questions, contact: optocoupleranswers@vishay.com Document Number: 82 4 Rev.., 2-Jul-9
Packaging and Ordering Information Packaging and Ordering Information 2257 Fig. 8 Document Number: 82 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com Rev.., 2-Jul-9 5
www.vishay.com Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2/65/EU of The European Parliament and of the Council of June 8, 2 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 22/95/EC. We confirm that all the products identified as being compliant to Directive 22/95/EC conform to Directive 2/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS79A standards. Please note that some Vishay documentation may still make reference to the IEC 6249-2-2 definition. We confirm that all the products identified as being compliant to IEC 6249-2-2 conform to JEDEC JS79A standards. Revision: 2-Oct-2 Document Number: 9