No. 049 Mirror Stock number: 80312412 Thank you for purchasing this No 049 Mirror. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product Necessary Tools Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact John Lewis Customer Services or your local branch. This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury or damage to the product. This product takes approximately 45 MINUTES to assemble with 2 PEOPLE The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN. Read this leaflet in full before commencing assembly. 1
Fittings and parts checklist A Mirror I B 2 x Side Panels J C Lower Shelf K D Upper Shelf L E Hanging Hook M F Metal Hanging Rail N G 10x Wood Washer O 10x Cam Nut 2x Cam Bolt 2x Cam Head 6x Wood Screw 1 x Hex Key 10x Wooden Cam cover 2x Wall Strap H 10 x Bolt 2
Step by step assembly instructions Step One On a soft, clean and level surface insert 2x cam bolts into the reverse of the mirror. Step Two Attach the Upper Shelf Panel (D) to the Mirror (A) as shown below using 2x Cam heads (K). 3
Step Three With the aid of an assistant carefully lift the mirror onto its side. Attach 1x Side Panel (B) using the hex key (M) provided. Thread bolt (H) through side panel (B), washer (G) and secure into cam nut (I) in order to attach the side panel (B) into place. Step Four Attach the 1 x Lower Shelf (C) to Side Panel (B). Thread bolt (H) through side panel (B), washer (G) and secure into cam nut (I). 4
Step Five With the aid of an assistant carefully turn the mirror over in order to fit the remaining Side Panel (B). Step Six With the aid of an assistant carefully stand the mirror up on to the base. Fit Wooden Cam Covers (N). 5
Step Seven Using a screwdriver, install the Hanging Hook (E) using 4x wood screws (K), then insert the Hanging Rail (F) Step Eight Your Mirror is supplied with wall fixing straps which John Lewis would recommend is used to secure the product to the wall. Attach one end of the wall fixing strap to the top of the unit with the screw provided and the other end should be attached to the wall by a competent person using a fixing suitable for your wall. If preferred the mirror can be attached to the skirting board using the fabric straps provided. Warning! Its very important to be mindful about the environment in which your furniture is being placed. It isn't only small children that could be tempted to climb furniture, pets could also use furniture as a ladder to retrieve objects out of their reach. Furniture tip over can cause serious and even a fatal injury to occur. Elderly people may also use furniture to pull themselves up from low seating or as a brace from a fall, the risks are different depending on your individual home environment. The Assembly of your new Mirror is now complete, Please ensure that all fittings and fixings are routinely inspected. Ensure to periodically tighten all fixings. 6
Care and Maintenance The John Lewis No 049 bedroom collection is crafted from solid Oak and Oak veneers and then finished with a light lime wash and lacquer. The woods and veneers used in this furniture have been specially selected for their natural beauty and characteristic appearance. Wood is a unique material and as such no two sections are identical. The depth and shade of colours and grain pattern will vary from item to item. All timber surfaces when subjected to direct or indirect sunlight will mellow and change colour over a period of time. New furniture may vary in shade from items previously purchased. This piece of furniture will endure most temperatures in the modern home. However, it should be positioned as far away from radiators, or other direct heat sources as possible. Wipe with a damp cloth to clean. We do not recommend the use of furniture polish, waxes or creams as these could leave a residue on the surface of the wood and may permanently change its appearance. Safety Instructions Warning! Never drag furniture when moving it, always lift it. Periodically check all fixings to ensure none have come loose and re-tighten where necessary. Please take care when handling or moving the furniture as careless handling may cause damage or injury. Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture. It is recommended that before moving heavy objects to a new location they are completely disassembled to avoid personal injury or damage to the furniture. Please be careful to retain all fittings when doing this. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE John Lewis Partnership 171 Victoria Street London SW1E 5NN www.johnlewis.com 7