CUTTING TOOLS Cutting Tools SECTION PAGE NO. DRILLS -1-1 TO 1 TAPS & DIES -2-1 TO 10 SAW BLADES & CUTTERS -3-1 TO 10 FILES -4-1 TO 4 MISC CUTTING TOOLS -5-1 TO 8 TABLE OF CONTENTS 1 DRILLS DRILL DECIMAL EQUIVALENTS CHART.................-1-1 DISPENSERS.................................-1-2 GAUGES & DRILL STAND.......................-1-2 DRILLS AIRCRAFT EXTENSION.........................-1-8 AUTOBODY..................................-1-13 CARBIDE....................................-1-3 COBALT DRILL BITS / FRACTIONAL & NUMBER....-1-3 COMBINED DRILLS & COUNTERSINKS...........-1-10 COMBINED DRILLS & TAPS.....................-1-9 CORE DRILLS................................-1-9 DRILL & TAP INDEXES.........................-1-2 DRILL SET 115PC.............................-1-2 EXTRA LENGTH...............................-1-7 GENERAL PURPOSE FRACTIONAL...............-1-7 GENERAL PURPOSE METRIC...................-1-12 GENERAL PURPOSE NUMBER..................-1-11 GLASS & TILE................................-1-15 HEAVY-DUTY FRACTIONAL.....................-1- HEX SHANK..................................-1-15 LEFT HAND..................................-1-8 LETTER......................................-1-11 MASONRY...................................-1-1 MECHANICS LENGTH.........................-1-7 PREMIUM FRACTIONAL........................-1-4 PREMIUM QUALITY METRIC....................-1-12 PREMIUM QUALITY NUMBER...................-1-10 SILVER & DEMING.............................-1-8 SPOT WELD..................................-1-14 STEP DRILL BITS..............................-1-14 STRAIGHTSHANK MASONRY SETS..............-1-15 STUB LENGTH................................-1-13 WOOD.......................................-1-9 2 TAPS & DIES DIES HEX.........................................-2-7 ROUND ADJUSTABLE..........................-2-8 TAPS CARBON STEEL...............................-2- HIGH SPEED STEEL...........................-2-5 METRIC CARBON STEEL.......................-2- METRIC HIGH SPEED STEEL....................-2-5 PIPE TAPS & DIES.............................-2-7 PREMIUM QUALITY............................-2-3 SHOP PRO PREMIUM QUALITY..................-2-4 SUPER HIGH PERFORMANCE...................-2-2 TAP & DIE SETS...............................-2-1 TAP & DRILL SETS............................-2-2 3 SAW BLADES & CUTTERS CUTTING BLAIRCUTTERS...............................-3-9 ROTABROCH................................-3-10 SPOTWELD CUTTERS.........................-3-9 SAWS AIR HACK SAW BLADES........................-3-4 BAND SAW BLADES...........................-3-1 CARBIDE TIP HOLE SAWS CT7..................-3-10 CIRCULAR SAW BLADES.......................-3-8 FOLDING JAB/UTILITY.........................-3-1 HACK SAW BLADES...........................-3-4 HACK SAW FRAME............................-3-5 HOLE SAW ARBORS...........................-3-7 HOLE SAW KITS..............................-3- JIG SAW BLADES.............................-3-1 PORTABLE BAND SAW BLADES.................-3-1 RECIPROCATING BLADES......................-3-2 4 FILES TOOLS BLACK MAXI-SHARP FILES.....................-4-1 FILE ACCESSORIES...........................-4-3 FILES.......................................-4-1 FILES IMPORT................................-4-3 FILES SPECIALTY.............................-4-3 5 MISC CUTTING TOOLS BURS ALUMINUM CUTTING CARBIDE 1/4 SHANK........-5-7 CARBIDE 1/4 SHANKBURR SETS & STANDS......-5- MINIATURE CARBIDE 1/8 SHANK................-5-7 CUTTING ANNULAR CUTTER PILOTS.....................-5-4 CARBIDE TOOL BITS...........................-5-5 COUNTERSINKS..............................-5-1 HIGH SPEED STEEL ANNULAR..................-5-4 END MILLS DOUBLE-END, 2-FLUTE, CENTER CUT END MILLS..-5-2 ROUGHING END MILLS.........................-5-2 SINGLE-END, 2-FLUTE, CENTER CUT END MILLS...-5-3 SINGLE-END, 4-FLUTE END MILLS...............-5-3 SINGLE-END, 4-FLUTE, CENTER CUT END MILLS...-5-3 SOLID CARBIDE, DOUBLE-END, 4-FLUTE END MILLS.-5-4 SOLID CARBIDE, SINGLE END, 2-FLUTE END MILLS -5-3 REAMERS BRIDGE REAMERS............................-5-2 CHUCKING..................................-5-1 HEX SHANK SPIRAL FLUTE.....................-5-1 SPIRAL FLUTE................................-5-1 SCREW EXTRACTORS POWER TYPE................................-5-8 SPIRAL......................................-5-8 SQUARE.....................................-5-7 Page 1
Service That Works We stock a complete line of Cutting Tool products Saw Blades & s Quality line of band saw and portable band saw blades Tri-fold saws, jigsaw, and reciprocating blades Hole saws, hole saw arbors and kits Hacksaw blades, frames and blair cutters Taps & Dies Tap & Die sets and accessories Tap and drill sets Hex dies High speed and carbon steel traps Pipe taps and dies Drills Durable Drill gauges and stands Tap & drill Dispensers and indexes Carbide drill bits Fractional and number drill bits Left handed, extra length, silver/deming drill bits and wood drills Extensive selection of drill bits: brad point, letter,stub length, body, spot weld, step type, hex shank, masonry, glass and tile drill bits Page 2 Miscellaneous Cutting Tools Chucking and spiral flute reamers Endmills and counterbores Carbide tool bits and shank burs Spiral screw extractors Files Black maxi sharp Specialty files Flie accessories
Drills 1 DRILL DECIMAL EQUIVALENTS CHART METRIC WIRE# FRACTIONAL LETTER SIZES Drill Drill Drill Drill Drill Drill Decimal Decimal Decimal Decimal Decimal Decimal 0.10 mm.0039 1.05 mm.0413 3 Wire.105 5.10 mm.2008 8.00 mm.3150 17/32.5312 97 Wire.0059 58 Wire.0420 7/4.1094 7 Wire.2010 O.310 13.50 mm.5315 9 Wire.003 57 Wire.0430 35 Wire.1100 13/4.2031 8.10 mm.3189 35/4.549 95 Wire.007 1.10 mm.0433 2.80 mm.1102 Wire.2040 8.20 mm.3228 14.00 mm.5512 94 Wire.0071 1.15 mm.0453 34 Wire.1110 5.20 mm.2047 P.3230 9/1.525 93 Wire.0075 5 Wire.045 33 Wire.1130 5 Wire.2055 8.30 mm.328 14.50 mm.5709 92 Wire.0079 3/4.049 2.90 mm.1142 5.30 mm.2087 21/4.3281 37/4.5781 0.20 mm.0079 1.20 mm.0472 32 Wire.110 4 Wire.2090 8.40 mm.3307 15.00 mm.590 91 Wire.0083 1.25 mm.0492 3.00 mm.1181 5.40 mm.212 Q.3320 19/32.5938 90 Wire.0087 1.30 mm.0512 31 Wire.1200 3 Wire.2130 8.50 mm.334 39/4.094 89 Wire.0091 55 Wire.0520 3.10 mm.1220 5.50 mm.215 8.0 mm.338 15.50 mm.102 88 Wire.0095 1.35 mm.0531 1/8.1250 7/32.2188 R.3390 5/8.250 87 Wire.0100 54 Wire.0550 3.20 mm.120 5.0 mm.2205 8.70 mm.3425 1.00 mm.299 8 Wire.0105 1.40 mm.0551 30 Wire.1285 2 Wire.2210 11/32.3438 41/4.40 85 Wire.0110 1.45 mm.0571 3.30 mm.1299 5.70 mm.2244 8.80 mm.345 1.50 mm.49 84 Wire.0115 1.50 mm.0591 3.40 mm.1339 1 Wire.2280 S.3480 21/32.52 0.30 mm.0118 53 Wire.0595 29 Wire.130 5.80 mm.2283 8.90 mm.3504 17.00 mm.93 83 Wire.0120 1.55 mm.010 3.50 mm.1378 5.90 mm.2323 9.00 mm.3543 43/4.719 82 Wire.0125 1/1.025 28 Wire.1405 A.2340 T.3580 11/1.875 81 Wire.0130 1.0 mm.030 9/4.140 15/4.2344 9.10 mm.3583 17.50 mm.890 80 Wire.0135 52 Wire.035 3.0 mm.1417.00 mm.232 23/4.3594 45/4.7031 0.35 mm.0138 1.5 mm.050 27 Wire.1440 B.2380 9.20 mm.322 18.00 mm.7087 79 Wire.0145 1.70 mm.09 3.70 mm.1457.10 mm.2402 9.30 mm.31 23/32.7188 1/4.015 51 Wire.070 2 Wire.1470 C.2420 U.380 18.50 mm.7283 0.04 mm.0157 1.75 mm.089 25 Wire.1495.20 mm.2441 9.40 mm.3701 47/4.7344 78 Wire.010 50 Wire.0700 3.80 mm.149 D.240 9.50 mm.3740 19.00 mm.7480 0.45 mm.0177 1.80 mm.0709 24 Wire.1520.30 mm.2480 3/8.3750 3/4.7500 77 Wire. 0180 1.85 mm.0728 3.90 mm.1535 1/4.2500 V.3770 49/4.75 0.50 mm.0197 49 Wire.0730 23 Wire.1540 E.2500 9.0 mm.3780 19.50 mm.777 7 Wire.0200 1.90 mm.0748 5/32.152.40 mm.2520 9.70 mm.3819 25/32.7812 75 Wire.0210 48 Wire.070 22 Wire.1570.50 mm.2559 9.80 mm.3858 20.00 mm.7874 0.55 mm.0217 1.95 mm.078 4.00 mm.1575 F.2570 W.380 51/4.799 74 Wire.0225 5/4.0781 21 Wire.1590.0 mm.2598 9.90 mm.3898 20.50 mm.8071 0.0 mm.023 47 Wire.0785 20 Wire.110 G.210 25/4.390 13/1.8125 73 Wire.0240 2.00 mm.0787 4.10 mm.114.70 mm.238 10.00 mm.3937 21.00 mm.828 72 Wire.0250 2.05 mm.0807 4.20 mm.154 17/4.25 X.3970 53/4.8281 0.5 mm.025 4 Wire.0810 19 Wire.10 H.20 10.20 mm.401 27/32.8438 71 Wire.020 45 Wire.820 4.30 mm.193.80 mm.277 Y.4040 21.50 mm.845 0.70 mm.027 2.10 mm.0827 18 Wire.195.90 mm.2717 10.30 mm.4055 55/4.8594 70 Wire.0280 2.15 mm.084 11/4.1719 I.2720 13/32.402 22.00 mm.81 9 Wire.0292 44 Wire.080 17 Wire.1730 7.00 mm.275 Z.4130 7/8.8750 0.75 mm.0295 2.20 mm.08 4.40 mm.1732 J.2770 10.50 mm.4134 22.50 mm.8858 8 Wire.0310 2.25 mm.088 1 Wire.1770 7.10 mm.2795 27/4.4219 57/4.890 1/32.0312 43 Wire.0890 4.50 mm.1772 K.2810 10.80 mm.4252 23.00 mm.9055 0.80 mm.0315 2.30 mm.090 15 Wire.1800 9/32.2812 11.00 mm.4331 29/32.902 7 Wire.0320 2.35 mm.0925 4.0 mm.1811 7.20 mm.2835 7/1.4375 59/4.9219 Wire.0330 42 Wire.0935 14 Wire.1820 7.30 mm.2874 11.20 mm.4409 23.50 mm.9252 0.85 mm.0335 3/32.0938 13 Wire.1850 L.2900 11.50 mm.4528 15/1.9375 5 Wire.0350 2.40 mm.0945 4.70 mm.1850 7.40 mm.2913 29/4.4531 24.00 mm.9449 0.90 mm.030 41 Wire.090 3/1.1875 M.2950 11.80 mm.44 1/4.9531 4 Wire.030 2.45 mm.095 12 Wire.1890 7.50 mm.2953 15/32.488 24.50 mm.94 3 Wire.0370 40 Wire.0980 4.80 mm.1890 19/4.299 12.00 mm.4724 31/32.988 0.95 mm.0374 2.50 mm.0984 11 Wire.1910 7.0 mm.2992 12.20 mm.4803 25.00 mm.9843 2 Wire.0380 39 Wire.0995 4.90 mm.1929 N.3020 31/4.4844 3/4.9844 1 Wire.0390 38 Wire.1015 10 Wire.1935 7.70 mm.3031 12.50 mm.4921 1 1.0000 1.00 mm.0394 2.0 mm.1024 9 Wire.190 7.80 mm.3071 1/2.5000 0 Wire.0400 37 Wire.1040 5.00 mm.199 7.90 mm.3110 13.00 mm.5118 59 Wire.0410 2.70 mm.103 8 Wire.1990 5/1.3125 33/4.515 TAP DRILL SIZES Thread Drill Thread Drill Thread Drill Thread Drill Thread Thread Drill 0-80 3/4 4-40 43 10-24 25 M8.0-1 7.0M 9/1-12 31/4 M20-1.5 18.5M M1.-.35 1.25M 4-48 42 10-32 21 3/8-1 5/1 M14-1.5 12.5M 7/8-9 49/4 1-4 54 M3.0-.5 2.50M M5.0-.8 4.20M 3/8-24 Q 9/1-18 33/4 M22-2.5 19.5M M1.8-.35 1.45M 5-40 38 12-24 1 M10-1.5 8.5M M1-2 14.0M M22-1.5 20.5M 1-72 53 5-44 37 12-28 14 M10-1.25 11/32 5/8-11 17/32 7/8-14 13/1 M2.0-.4 1.0M -32 3 M.0-1 5.0M 7/1-14 U M1/1.5 14.5M M24-3 21.0M 2-5 51-40 33 1/4-20 7 7/1-20 25/4 5/8-18 37/4 M24-2 22.0M M2.2-.45 1.75M M3.5-. 2.90M 1/4-28 3 M12-1.75 Y M18-2.5 15.5M 1-8 7/8 2-4 50 M4.0-.7 3.30M M7.0-1.0M 1/2-13 27/4 M18-1.5 1.5M 1-12 59/4 3-48 47 8-32 29 5/1-18 F M12-1.25 10.8M 3/4-10 21/32 1-14 15/1 M2.5-.45 2.05M 8-3 29 M8.0-1.25 H 1/2-20 29/4 3/4-1 11/1 3-5 45 M4.5-.75 2 5/1-24 I M14-2 12.0M M20-2.5 17.5M -1-1
1 Drills DRILL GAUGE 1.04.002 3 x Steel Gauge For measuring 1/1 thru 1/2 by 4ths DRILL GAUGES & DRILL STAND DRILL GAUGE 1.03.002 3 x 5-1/2 Steel Gauge For measuring No.1 thru No. 0 wire gauge drill bits SILVER & DEMING DRILL STAND 1.30.001 Holds Silver & Deming Drills from 1/2 to 1 by 4ths Steel Construction, Baked Enamel Finish, 13 x 5 x 2-3/4 Color: Gray DRILL DISPENSER 1.04.001 Holds 12 each of fractional drills 1/1 thru 1/2 by 4ths Steel Construction, Baked Epoxy Finish 7-3/8 x 7-3/4 x 14-5/8 Color: gray DRILL DISPENSER 1.0.29 2 Compartments for Letters A thru Z Steel Construction, Baked Epoxy Finish, 7-3/8 x 7-3/4 x 14-5/8 Color: gray DRILL DISPENSER 1.40.001 Holds 12 each of Metric Drills: 1mm - 13mm x 0.5 Steel construction, baked epoxy finish Dimensions: 7-3/8 D x 7-3/4 H x 14-5/8 W Color: gray MASTER DRILL CABINET 1.04.003 1/8 to 1 x 4ths Cabinet Dimensions 2 W x 12-1/2 D x 4-1/2 H Vinyl drawer dividers seperate and protect drills Lockable, comes with 2 sets of keys Stackable with other dispensers Ball bearing drawer slides MASTER TAP CABINET 1.14.003 1/8 to 1 x 4ths Holds NC/NF sizes from 1/4 to 1-1/2 Holds metrics from 2.5mm to 30mm Holds machine screw size 2-5 through 12-28, taper, plug, bottom and sprial Lockable, comes with 2 sets ok keys Stackable with other dispensers Ball bearing drawer slides DRILL DISPENSERS DRILL DISPENSER 1.03.001 Holds 12 each of Number Drills No.1 thru No. 0 Steel Construction, Baked Epoxy Finish, 7-3/8 x 7-3/4 x 14-5/8 Color: gray DRILL AND TAP DISPENSER 1.14.001 Tap - 32 Drill #3 8-32 #29 10-24 #25 10-32 #21 1/4-20 #7 1/4-28 #3 5/1-18 F 5/1-24 I 3/8-1 5/1 3/8-24 Q 7/1-14 U 7/1-20 25/4 1/2-13 27/4 1/2-20 29/4 Stores and organizes correct Tap Drill with corresponding size tap Holds one dozen (minimum) of each size Dimensions: 14-5/8 W x 7-3/8 D x 7-3/8 H Weight: 10-1/2 Lbs. Color: gray METRIC TAPS, DRILLS / DIE DISPENSER 1.14.002 The dispenser for metric taps, drills & dies. From M2.5x.45 tap to M12.0x1.75 tap Steel construction, Baked Epoxy Finish, 7-3/8 x 7-3/4 x 14-5/8 Color: Gray DRILLS DRILL & TAP INDEXES 18 PC. UNC TAP & DRILL INDEX 1.14.18 For: Taps -32, 8-32, 10-24, 10-32, 1/4-20, 5/1-18, 3/8-1, 7/1-14 & 1/2-13 Drills #3, #29, #25, #21, #7, F, 5/1, U & 27/4 DrillCo 10 PC. TAP INDEX 1.14.09 For: Taps 1/4-20, 1/4-28, 5/1-18, 5/1-24, 3/8-1, 3/8-24, 7/1-14, 7/1-20, 1/2-13 & 1/2-20 DRILLS DRILL SET 115PC 115PC 3-IN-1 JOBBERS DRILL SET 1.08.0115 Manufactured from a special high molybdenum tool steel Gold surface treated for maximum lubricity 135 split point Set Contains:1/1 through 1/2 by 4ths A through Z 1 through 0 1.08.0114 - Replacement Index -1-2
Drills 1 DRILLS CARBIDE SOLID CARBIDE JOBBER LENGTH DRILLS 1/1 1-1/2 1.37.11 5/4 1-3/4 1.37.54 3/32 2 1.37.332 7/4 2-1/4 1.37.74 1/8 2-1/4 1.37.18 9/4 2-1/2 1.37.94 5/32 2-1/2 1.37.532 11/4 2-3/4 1.37.114 3/1 2-1/4 1.37.31 13/4 3 1.37.134 7/32 3 1.37.732 15/4 3-1/4 1.37.154 1/4 3-1/4 1.37.14 17/4 3-1/2 1.37.174 19/4 3-3/4 1.37.194 5/1 3-3/4 1.37.51 21/4 4 1.37.214 11/32 4 1.37.1132 23/4 4 1.37.234 3/8 4-1/4 1.37.38 25/4 4-1/2 1.37.254 13/32 4-1/2 1.37.1332 27/4 4-1/2 1.37.274 7/1 4-1/2 1.37.71 29/4 4-1/2 1.37.294 15/32 4-3/4 1.37.1532 31/4 4-3/4 1.37.314 1/2 4-3/4 1.37.12 9/32 3-1/2 1.37.932 1.37.29-29 PC Solid Carbide Set (1/1-1/2 ) 1.37.00 - Starter set includes sizes 1/1, 1/8, 3/1, 1/4, 5/1, 3/8 1.41.98 - Replacement Index Heavy duty drills feature a regular helix and polished flutes for rapid chip removal Recommended for use under high drilling temperatures and where the drill body must withstand continous abrasion Ideal for drilling steel, cast iron and other non-ferrous materials where greater tortional stresses are encountered HARD STEEL DRILLS Drill Shank 1/8 1/8 2-3/4 1.1.18 5/32 5/32 3 1.1.532 11/4 11/4 3 1.1.114 3/1 3/1 3 1.1.31 7/32 7/32 4 1.1.732 1/4 1/4 4 1.1.14 5/8 1/2 1.1.58 Ideal for drilling broken studs, bolts, springs, die sections, broken easy outs, brake drums and extra tough or exotic metals Made for drilling hardened steel in the range of 48 to 5 Rockwell C Carbide tipped, straight flute 1 3-7/8 1.09.001 31 2-3/4 1.09.031 2 3-7/8 1.09.002 32 2-3/4 1.09.032 3 3-3/4 1.09.003 33 2-5/8 1.09.033 4 3-3/4 1.09.004 34 2-5/8 1.09.034 5 3-3/4 1.09.005 35 2-5/8 1.09.035 3-3/4 1.09.00 3 2-1/2 1.09.03 7 3-5/8 1.09.007 37 2-1/2 1.09.037 8 3-5/8 1.09.008 38 2-1/2 1.09.038 9 3-5/8 1.09.009 39 2-3/8 1.09.039 10 3-5/8 1.09.010 40 2-3/8 1.09.040 11 3-1/2 1.09.011 41 2-3/8 1.09.041 12 3-1/2 1.09.012 42 2-1/4 1.09.042 13 3-1/2 1.09.013 43 2-1/4 1.09.043 14 3-3/8 1.09.014 44 2-1/8 1.09.044 15 3-3/8 1.09.015 45 2-1/8 1.09.045 1 3-3/8 1.09.01 4 2-1/8 1.09.04 17 3-3/8 1.09.017 47 2 1.09.047 18 3-1/4 1.09.018 48 2 1.09.048 19 3-1/4 1.09.019 49 2 1.09.049 20 3-1/4 1.09.020 50 2 1.09.050 21 3-1/4 1.09.021 51 2 1.09.051 22 3-1/8 1.09.022 52 1-7/8 1.09.052 23 3-1/8 1.09.023 53 1-7/8 1.09.053 24 3-1/8 1.09.024 54 1-7/8 1.09.054 25 3 1.09.025 55 1-7/8 1.09.055 2 3 1.09.02 5 1-3/4 1.09.05 27 3 1.09.027 57 1-3/4 1.09.057 28 2-7/8 1.09.028 58 1-5/8 1.09.058 29 2-7/8 1.09.029 59 1-5/8 1.09.059 30 2-3/4 1.09.030 0 1-5/8 1.09.00 NUMBER 1.09.0-0-Piece Number Set with Index 1.03.0000 - Replacement Index Heavy-duty 135o split point Permits 30% higher speed Require rigidly held drilling equipment Drill Shank 5/1 1/4 4 1.1.51 3/8 1/4 4 1.1.38 7/1 3/8 1.1.71 1/2 1/2 1.1.12 9/1 1/2 1.1.91 DRILLS COBALT DRILL BITS / FRACTIONAL & NUMBER COBALT NAS 907-J JOBBERS LENGTH DRILLS FRACTIONAL 3/4 1-3/4 1.09.34 1/1 1-7/8 1.09.11 5/4 2 1.09.54 3/32 2-1/4 1.09.332 7/4 2-5/8 1.09.74 1/8 2-3/4 1.09.18 9/4 2-7/8 1.09.94 5/32 3-1/8 1.09.532 11/4 3-1/4 1.09.114 3/1 3-1/2 1.09.31 13/4 3-5/8 1.09.134 7/32 3-3/4 1.09.732 15/4 3-7/8 1.09.154 1/4 4 1.09.14 17/4 4-1/8 1.09.174 1.09.29 1.04.00290 9/32 4-1/4 1.09.932 19/4 4-3/8 1.09.194 5/1 4-1/2 1.09.51 21/4 4-5/8 1.09.214 11/32 4-3/4 1.09.1132 23/4 4-7/8 1.09.234 3/8 5 1.09.38 25/4 5-1/8 1.09.254 13/32 5-1/4 1.09.1332 27/4 5-3/8 1.09.274 7/1 5-1/2 1.09.71 29/4 5-5/8 1.09.294 15/32 5-3/4 1.09.1532 31/4 5-7/8 1.09.314 1/2 1.09.12-29-Piece Fractional Set with Index - Replacement Index -1-3
1 Drills DRILLS PREMIUM FRACTIONAL 1/1 1-7/8 1.84.11 5/4 2 1.84.54 3/32 2-1/4 1.84.332 7/4 2-5/8 1.84.74 1/8 2-3/4 1.84.18 9/4 2-7/8 1.84.94 5/32 3-1/8 1.84.532 11/4 3-1/4 1.84.114 3/1 3-1/2 1.84.31 13/4 3-5/8 1.84.134 7/32 3-3/4 1.84.732 15/4 3-7/8 1.84.154 1/4 4 1.84.14 17/4 4-1/8 1.84.174 9/32 4-1/4 1.84.932 PREMIUM CUTTING TOOLS 19/4 4-3/8 1.84.194 5/1 4-1/2 1.84.51 21/4 4-5/8 1.84.214 11/32 4-3/4 1.84.1132 23/4 4-7/8 1.84.234 3/8 5 1.84.38 25/4 5-1/8 1.84.254 13/32 5-1/4 1.84.1332 27/4 5-3/8 1.84.274 7/1 5-1/2 1.84.71 29/4 5-5/8 1.84.294 15/32 5-3/4 1.84.1532 31/4 5-7/8 1.84.314 1/2 1.84.12 Manufactured from a premium grade molybdenum high speed steel 140 split point for longer life. Drill more holes per dollar Jobber length 3 flats on shank on 3/1 dia. drills & larger Black and Bronze surface, treated for maximum lubricity 1.84.29 1.84.290 1.84.0029 1.84.291 1.84.292-29-Piece Set with Metal Index (1/1-1/2) - 29-Piece Set with Plastic Index - Replacement Metal Index - Replacement Plastic Index - 55 -Piece set with Drill Dispenser (1/1-1/2) PREMIUM CUTTING TOOLS 1/1 1-7/8 1.85.11 5-4 2 1.85.54 3/32 2-1/4 1.85.332 7-4 2-5/8 1.85.74 1/8 2-3/4 1.85.18 9/4 2-7/8 1.85.94 5/32 3-1/8 1.85.532 11/4 3-1/4 1.85.114 3/1 3-1/2 1.85.31 13/4 3-5/8 1.85.134 7/32 3-3/4 1.85.732 15/4 3-7/8 1.85.154 1/4 4 1.85.14 17/4 4-1/8 1.85.174 9/32 4-1/4 1.85.932 5/1 4-1/2 1.85.51 21/4 4-5/8 1.85.214 11/32 4-3/4 1.85.1132 23/4 4-7/8 1.85.234 3/8 5 1.85.38 25/4 5-1/8 1.85.254 13/32 5-1/4 1.85.1332 27/4 5-3/8 1.85.274 7/1 5-1/2 1.85.71 29/4 5-5/8 1.85.294 15/32 5-3/4 1.85.1532 31/4 5-7/8 1.85.314 1/2 1.85.12 1.85.29-29 Piece Set With Plastic Round Index (1/1-1/2) 19/4 4-3/8 1.85.194 Designed for drilling steel, stainless steel, titanium, nickel, and aluminum Jobber length drill bit has a midrange drilling depth High-speed steel (HSS) provides hardness for wear resistance TiN-coated tip offers increase hardness for better wear resistant and has a longer tool life than an uncoated drill bit Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging Description 13pc Starter Set w/black Index 13pc Starter Set w/black Index MECHANICS LENGTH DRILLS Set Contents 1/1, 3/32, 1/8, 5/32, 3/1, 7/32, 1/4, 9/32, 5/1, 11/32, 3/8, 7/1, 1/2 Replacement Index/Stand 1.04.1329 1.04.00290 1/1, 5/4, 3/32, 7/4, 1/8, 9/4, 5/32, 11/4, 3/1, 13/4, 1.04.2913 1.04.00290 7/32, 15/4, 1/4 13pc Set w/black Index 1/1-1/4 x 4ths 1.04.0013 1.04.0014 15pc Set w/black Index 1/1-1/2 x 32nds 1.04.0015 1.04.001 21pc Set w/black Index 1/1-14 x 1/1ths 9/32-12 x 1/32nds 1.04.0021 1.04.0022 29pc Set w/stand 1/1-1/2 by 4ths 1.04.00291 1.04.00292 29pc w/black Index 1/1-1/2 by 4ths 1.04.0029 1.04.00290 29pc Set w/plastic Index 1/1-1/2 by 4ths 1.04.290 1.04.291 8pc Set w/drill Dispenser 1/1-1/2 by 4ths 971.104 1.04.001 9pc Set w/drill Dispenser 1/1-1/2 by 4ths 971.1049 1.04.001 Manufactured from a special high molybdenum tool steel Nitro-Carburized surface treatment for extra wear resistance Self-centering 135 split point Gold surface treated 3 flats on shanks on 3/1 dia. drills & larger (see diagram A) virtually eliminates chuck slippage gram A -1-4
Drills 1 DRILLS PREMIUM FRACTIONAL (continued) MECHANICS LENGTH DRILLS 1/1 1-7/8 1.04.11* 19/4 3-7/8 1.04.194 5/4 2 1.04.54* 5/1 4 1.04.51 3/32 2-1/4 1.04.332* 21/4 4-1/1 1.04.214 7/4 2-3/8 1.04.74* 11/32 4-1/8 1.04.1132 1/8 2-1/2 1.04.18* 23/4 4-3/1 1.04.234 9/4 2-5/8 1.04.94* 3/8 4-1/4 1.04.38 5/32 2-3/4 1.04.532* 25/4 4-5/1 1.04.254 11/4 2-7/8 1.04.114* 13/32 4-3/8 3/1 3 1.04.31 1.04.1332 13/4 3-1/8 1.04.134 27/4 4-7/1 1.04.274 7/32 3-1/4 1.04.732 7/1 4-1/2 1.04.71 15/4 3-3/8 1.04.154 29/4 4-5/8 1.04.294 1/4 3-1/2 1.04.14 15/32 4-3/4 1.04.1532 17/4 3-5/8 1.04.174 31/4 4-7/8 1.04.314 9/32 3-3/4 1.04.932 1/2 5 1.04.12 *Note: 11/4 and smaller do not have Flats on the shank. 3/8 REDUCED SHANK MECHANICS LENGTH DRILLS 13/32 4-3/8 1.05.1332 27/4 4-7/1 1.05.274 7/1 4-1/2 1.05.71 29/4 4-5/8 1.05.294 15/32 4-3/4 1.05.1532 31/4 4-7/8 1.05.314 1/2 5 1.05.12 1.05.0029 1.04.00290-29-Piece Set with Index - Replacement Index gram B Same as the fractional drills, with the exception of a 3/8 reduced shank with three flats. See diagram B. MECHANICS LENGTH HEX SHANK DRILLS - 1/4 QUICK RELEASE 1/1 2-5/8 1.12.11 3/32 3-1/4 1.12.332 1/8 3-1/2 1.12.18 9/32 3-13/1 1.12.932 5/32 3-1/2 1.12.532 3/1 3-3/4 1.12.31 7/32 4 1.12.732 1/4 4-1/4 1.12.14 1.12.15322 5/1 4 1.12.51 11/32 4-7/32 1.12.1132 3/8 4-1/4 1.12.38 13/32 4-1/2 1.12.1332 1.12.15321 7/1 4-1/2 1.12.71 15/32 4-7/8 1.12.1532 1/2 5 1.12.121 *1/4 and smaller are 2 piece 1.12.15321-12 - Piece Hard Case Set with Quick Release Adaptor (1/1-1/2) pressed and epoxy fitted 1.12.15322-7-Piece Soft Pouch Set (1/1-1/4) Drill is a mechanic length with a quick release shank Manufactured from special Hi-Molybdenum tool steel 135o split point for fast penetration and accurate starting without center punch Gold surface treated Specially designed for hand held drills Quick release eases changing of cutting tools JOBBERS LENGTH DRILLS 1/1 1-7/8 1.08.11 19/4 4-3/8 1.08.194 5/4 2 1.08.54 5/1 4-1/2 1.08.51 3/32 2-1/4 1.08.332 21/4 4-5/8 1.08.214 7/4 2-5/8 1.08.74 11/32 4-3/4 1.08.1132 1/8 2-3/4 1.08.18 23/4 4-7/8 1.08.234 9/4 2-7/8 1.08.94 3/8 5 1.08.38 5/32 3-1/8 1.08.532 25/4 5-1/8 1.08.254 11/4 3-1/4 1.08.114 13/32 5-1/4 1.08.1332 3/1 3-1/2 1.08.31 27/4 5-3/8 1.08.274 13/4 3-5/8 1.08.134 7/1 5-1/2 1.08.71 7/32 3-3/4 1.08.732 29/4 5-5/8 1.08.294 15/4 3-7/8 1.08.154 15/32 5-3/4 1.08.1532 1/4 4 1.08.14 31/4 5-7/8 1.08.314 17/4 4-1/8 1.08.174 1/2 1.08.12 9/32 4-1/4 1.08.932 33/4-5/8 1.08.334 1.08.21-21-Piece Set with Metal Index (1/1-3/8) 1.08.29-29-Piece Set with Metal Index (1/1-1/2) 1.08.290-29-Piece Set with Plastic Index 1.04.00290 - Replacement Metal Index (1/1-1/2 x 4th) 1.008.291 - Replacement Plastic Index Round 971.108-8-Piece Set with Drill Dispenser (1/1-1/2) 971.1089-9-Piece Set with Drill Dispenser (1/1-1/2) - 115-Piece ShopPro Jobber Master Drill Cabinet (1/8-1 ) 971.108115 Manufactured from a special high molybdenum tool steel 135 split point Gold surface treated Nitro-Carburized surface treatment for extra wear resistance 17/32-5/8 1.08.1732 35/4-5/8 1.08.354 9/1-5/8 1.08.91 37/4-5/8 1.08.374 19/32 7-1/8 1.08.1932 39/4 7-1/8 1.08.394 5/8 7-1/8 1.08.58 41/4 7-1/8 1.08.414 21/32 7-1/8 1.08.2132 11/1 7-3/8 1.08.111 45/4 7-3/8 1.08.454 23/32 7-3/8 1.08.2332 47/4 7-3/8 1.08.474 3/4 7-3/8 1.08.34-1-5
1 Drills DRILLS PREMIUM FRACTIONAL (continued) QUAD POINT JOBBER LENGTH DRILLS 1/4 3/4 1.08.14 1/32 1-3/8 1.08.132 3/4 1-3/4 1.08.34 1/1 1-7/8 1.007.11 5/4 2 1.007.54 3/32 2-1/4 1.007.332 7/4 2-5/8 1.007.74 1/8 2-3/4 1.007.18 9/4 2-7/8 1.007.94 5/32 3-1/8 1.007.532 11/4 3-1/4 1.007.114 3/1 3-1/2 1.007.31 13/4 3-5/8 1.007.134 7/32 3-3/4 1.007.732 15/4 3-7/8 1.007.154 1/4 4 1.007.14 17/4 4-1/8 1.007.174 9/32 4-1/4 1.007.932 19/4 4-3/8 1.007.194 5/1 4-1/2 1.007.51 21/4 4-5/8 1.007.214 11/32 4-3/4 1.007.1132 23/4 4-7/8 1.007.234 3/8 5 1.007.38 25/4 5-1/8 1.007.254 13/32 5-1/4 1.007.1332 27/4 5-3/8 1.007.274 7/1 5-1/2 1.007.71 29/4 5-5/8 1.007.294 15/32 5-3/4 1.007.1532 31/4 5-7/8 1.007.314 1/2 1.007.12 1.115-29 Quad Pt Set with Metal index Heavy-duty construction for drilling in tougher materials Manufactured from Premium high-speed steel 135 split point is self-centering for reduced thrust and easier penetration TIN COATED JOBBERS LENGTH DRILLS 1/1 1-7/8 1.081.11 19/4 4-3/8 1.081.194 5/4 2 1.081.54 5/1 4-1/2 1.081.51 3/32 2-1/4 1.081.332 21/4 4-5/8 1.081.214 7/4 2-5/8 1.081.74 11/32 4-3/4 1.081.1132 1/8 2-3/4 1.081.18 23/4 4-7/8 1.081.234 9/4 2-7/8 1.081.94 3/8 5 1.081.38 5/32 3-1/8 1.081.532 25/4 5-1/8 1.081.254 11/4 3-1/4 1.081.114 13/32 5-1/4 1.081.1332 3/1 3-1/2 1.081.31 27/4 5-3/8 1.081.274 13/4 3-5/8 1.081.134 7/1 5-1/2 1.081.71 7/32 3-3/4 1.081.732 29/4 5-5/8 1.081.294 15/4 3-7/8 1.081.154 15/32 5-3/4 1.081.1532 1/4 4 1.081.14 31/4 5-7/8 1.081.314 17/4 4-1/8 1.081.174 1/2 1.081.12 9/32 4-1/4 1.081.932 1.081.0029-29-Piece Set with Metal Index (1/1-1/2) 1.04.00290 - Replacement Metal Index 118 point Titanium Nitride (TIN) coating provides a super hard surface with high lubricity Ideal for use in high wear or very abrasive drilling applications Heavy-duty construction designed for drilling hard metals, work-hardened stainless and other difficult to drill materials DRILLS HEAVY-DUTY FRACTIONAL DRILL BITS FRACTIONAL 1/1 1-7/8 1.008.11 5/4 2 1.008.54 3/32 2-1/4 1.008.332 7/4 2-5/8 1.008.74 1/8 2-3/4 1.008.18 9/4 2-7/8 1.008.94 5/32 3-1/8 1.008.532 11/4 3-1/4 1.008.114 3/1 3-1/2 1.008.31 13/4 3-5/8 1.008.134 7/32 3-3/4 1.008.732 15/4 3-7/8 1.008.154 1/4 4 1.008.14 17/4 4-1/8 1.008.174 9/32 4-1/4 1.008.932 19/4 4-3/8 1.008.194 5/1 4-1/2 1.008.51 21/4 4-5/8 1.008.214 11/32 4-3/4 1.008.1132 23/4 4-7/8 1.008.234 3/8 5 1.008.38 25/4 5-1/8 1.008.254 13/32 5-1/4 1.008.1332 27/4 5-3/8 1.008.274 7/1 5-1/2 1.008.71 29/4 5-5/8 1.008.294 15/32 5-3/4 1.008.1532 31/4 5-7/8 1.008.314 1/2 1.008.12 1.008.29 1.008.290-29-Piece Set with Metal Index - 29-Piece Set withplastic Index (Winzer Logo) 1.008.291 - Replacement Plastic Index (Winzer Logo) Heavy-duty requires less thrust than general purpose drill 135o split point Black surface treated Recommended for medium hardness metal drilling applications -1-
Drills 1 DRILLS MECHANICS LENGTH HIGH QUALITY MECHANICS LENGTH DRILLS Flute 1/1 1.88.88 1.07.11 5/4 2.00 1.00 1.07.54 3/32 2.25 1.25 1.07.332 7/4 2.30 1.25 1.07.74 1/8 2.43 1.25 1.07.18 9/4 2.5 1.30 1.07.94 5/32 2.70 1.40 1.07.532 11/4 2.82 1.47 1.07.114 3/1 2.9 1.52 1.07.31 13/4 3.08 1.0 1.07.134 7/32 3.22 1.75 1.07.732 15/4 3.35 1.80 1.07.154 1/4 3.48 1.85 1.07.14 17/4 3.1 1.90 1.07.174 9/32 3.74 1.95 1.07.932 Flute 19/4 3.87 2.00 1.07.194 5/1 4.00 2.05 1.07.51 21/4 4.0 2.10 1.07.214 11/32 4.13 2.15 1.07.1132 23/4 4.20 2.18 1.07.234 3/8 4.27 2.20 1.07.38 25/4 4.34 2.24 1.07.254 13/32 4.40 2.30 1.07.1332 27/4 4.47 2.32 1.07.274 7/1 4.54 2.3 1.07.71 29/4 4.7 2.40 1.07.294 15/32 4.80 2.50 1.07.1532 31/4 4.93 2.55 1.07.314 1/2 5.0 2.0 1.07.12 1.07.29-29-Piece Set with Index 1.04.00290 - Replacement Index Made in U.S.A. 135 Split point Black Surface Treatment DRILLS GENERAL PURPOSE FRACTIONAL GENERAL PURPOSE JOBBERS LENGTH DRILLS 1/1 1-7/8 1.28.11 5/4 2 1.28.54 3/32 2-1/4 1.28.332 7/4 2-5/8 1.28.74 1/8 2-3/4 1.28.18 9/4 2-7/8 1.28.94 5/32 3-1/8 1.28.532 11/4 3-1/4 1.28.114 3/1 3-1/2 1.28.31 13/4 3-5/8 1.28.134 7/32 3-3/4 1.28.732 15/4 3-7/8 1.28.154 1/4 4 1.28.14 17/4 4-1/8 1.28.174 9/32 4-1/4 1.28.932 19/4 4-3/8 1.28.194 5/1 4-1/2 1.28.51 21/4 4-5/8 1.28.214 11/32 4-3/4 1.28.1132 23/4 4-7/8 1.28.234 3/8 5 1.28.38 25/4 5-1/8 1.28.254 13/32 5-1/4 1.28.1332 27/4 5-3/8 1.28.274 7/1 5-1/2 1.28.71 29/4 5-5/8 1.28.294 15/32 5-3/4 1.28.1532 31/4 5-7/8 1.28.314 1/2 1.28.12 1.28.29-29-Piece Set Black surface treated HSS 118O Point For portable and machine drilling Designed to perform in low and medium carbon steels, cast iron, and wood GENERAL PURPOSE JOBBERS LENGTH DRILLS 1/1 1-7/8 1.080.11 19/4 4-3/8 1.080.194 5/4 2 1.080.54 5/1 4-3/8 1.080.51 3/32 2-1/4 1.080.332 21/4 4-5/8 1.080.214 7/4 2-5/8 1.080.74 11/32 4-3/4 1.080.1132 1/8 2-3/4 1.080.18 23/4 4-7/8 1.080.234 9/4 2-7/8 1.080.94 3/8 5 5/32 3-1/8 1.080.532 1.080.38 11/4 3-1/4 1.080.114 25/4 5-1/8 1.080.254 3/1 3-1/2 1.080.31 13/32 5-1/4 1.080.1332 13/4 3-5/8 1.080.134 27/4 5-3/8 1.080.274 7/32 3-3/4 1.080.732 7/1 5-1/2 1.080.71 15/4 3-7/8 1.080.154 29/4 5-5/8 1.080.294 1/4 4 1.080.14 15/32 5-3/4 1.080.1532 17/4 4-1/8 1.080.174 31/4 5-7/8 1.080.314 9/32 4-1/4 1.080.932 1/2 1.080.12 1.080.0029-29-Piece Set Bright finish HSS 118O Point For portable and machine drilling Recommended for non-ferrous metals, wood, and plastic DRILLS EXTRA LENGTH EXTRA LENGTH DRILLS Over-All Flute 1/8 9 1.29.18 1/8 12 9 1.29.1812 3/1 12 9 1.29.3112 1/4 12 9 1.29.1412 5/1 12 9 1.29.5112 3/8 12 9 1.29.3812 7/1 12 9 1.29.7112 1/2 12 9 1.29.1212 9/1 12 9 1.29.9112 Over-All Flute 3/4 12 9 1.29.3412 1/4 18 13 1.29.1418 5/1 18 13 1.29.5118 3/8 18 13 1.29.3818 7/1 18 13 1.29.7118 1/2 18 13 1.29.1218 5/8 18 13 1.29.5818 High-Speed Steel Designed for use in low and medium carbon steel, cast iron and wood -1-7
1 Drills 1/1 1.41.11 5/4 1.41.54 3/32 1.41.332 7/4 1.41.74 1/8 1.41.18 9/4 1.41.94 5/32 1.41.532 11/4 1.41.114 3/1 1.41.31 13/4 1.41.134 7/32 1.41.732 15/4 1.41.154 1/4 1.41.14 17/4 1.41.174 LEFT HANDED DRILL BITS 9/32 1.41.932 19/4 1.41.194 5/1 1.41.51 21/4 1.41.214 11/32 1.41.1132 23/4 1.41.234 3/8 1.41.38 25/4 1.41.254 13/32 1.41.1332 27/4 1.41.274 7/1 1.41.71 29/4 1.41.294 15/32 1.41.1532 31/4 1.41.314 1/2 1.41.12 1.41.99-8 pc set in metal index (1/1, 1/8, 3/1, 1/4, 5/1, 3/8, 7/1, 1/2 ) 1.41.98 - Replacement index box Special Hi-Molybdenum tool steel 135 split point for fast penetration & accurate starting without a center punch Gold surface treated Ideal for drilling broken studs Many times the left hand spiral drill will loosen and remove the stud while drilling a hole for a screw extractor DRILLS LEFT HAND 1.41.99 1.41.98 DRILLS AIRCRAFT EXTENSION GENERAL PURPOSE LEFT HAND DRILL BITS 1/1 1-7/8 1.004.11 3/32 2-3/4 1.004.332 1/8 2-3/4 1.004.18 5/32 3-1/8 1.004.532 3/1 3-1/2 1.004.31 1/4 4 1.004.14 5/1 4-1/2 1.004.51 3/8 5 1.004.38 1/2 1.004.12 High Speed Steel 118 Point Bright Finish SCREW EXTRACTOR SETS 1.43.99 Extractors & Left Handed Drill Set in Metal Index (8 pc.) 1.42.99 Extractors & Left Handed Drill Set in Metal Index (10 pc.) *For individual extractor sizes see page -5-7 AIRCRAFT EXTENSION BITS Flute 7/4" " 1-1/2" 1.029.74 9/4" " 1-3/4" 1.029.94 1/4" " 2-3/4" 1.029.14 5/1" " 3-5/1" 1.029.51 1/8" " 1-5/8" 1.029.18 3/1" " 2-5/1" 1.029.31 Flute 3/8" " 3-5/8" 1.029.38 7/32" 12" 2-1/2" 1.029.732 3/1" 12" 2-5/1" 1.029.31 1/8" 12" 1-5/8" 1.029.18 1/4" 12" 2-3/4" 1.029.14 #1 12" 2-5/8" 1.029.1 High-Speed Steel 135 split point Heavy duty construction for drilling holes in hard to reach places DRILLS SILVER & DEMING DRILL BITS SILVER & DEMING 33/4 1.30.334 3/4 1.30.34 3/4 1.30.34 17/32 1.30.1732 35/4 1.30.354 9/1 1.30.91 37/4 1.30.374 19/32 1.30.1932 39/4 1.30.394 5/8 1.30.58 41/4 1.30.414 21/32 1.30.2132 43/4 1.30.434 11/1 1.30.111 45/4 1.30.454 49/4 1.30.494 25/32 1.30.2532 51/4 1.30.514 13/1 1.30.131 53/4 1.30.534 27/32 1.30.2732 55/4 1.30.554 7/8 1.30.78 57/4 1.30.574 29/32 1.30.2932 59/4 1.30.594 15/1 1.30.151 1 1.31.1 1-1/32 1.31.1132 1-1/1 1.31.111 1-3/32 1.31.1332 1-1/8 1.31.118 1-5/32 1.31.1532 1-3/1 1.31.131 1-7/32 1.31.1732 1-1/4 1.31.114 1-5/1 1.31.151 1-3/8 1.31.138 1/2 shanks 3 Flats on the shanks - to virtually eliminate chuck slippage Hi-Molybdenum Tool Steel for the tough drilling jobs like stainless steel Nitro-carburized surface treatment helps keep these drills sharp under high heat conditions Genuine ShopPro Quality 118 Split Point 23/32 1.30.2332 47/4 1.30.474 1/4 1.30.14 31/32 1.30.3132 1-7/1 1.31.171 1-1/2 1.31.112 1.30.8-8-Piece Set Includes 9/1, thru 1 by 1th 1.30.81-8-Piece Set Replacement index -1-8
Drills 1 DRILLS SILVER & DEMING (continued) GENERAL PURPOSE SILVER & DEMING DRILL BITS WITH FLATS 33/4 1.48.334 13/1 1.48.131 17/32 1.48.1732 53/4 1.48.534 35/4 1.48.354 27/32 1.48.2732 9/1 1.48.91 55/4 1.48.554 37/4 1.48.374 7/8 1.48.78 19/32 1.48.1932 57/4 1.48.574 39/4 1.48.394 29/32 1.48.2932 5/8 1.48.58 59/4 1.48.594 41/4 1.48.414 15/1 1.48.151 21/32 1.48.2132 1/4 1.48.14 43/4 1.48.434 31/32 1.48.3132 11/1 1.48.111 3/4 1.48.34 45/4 1.48.454 23/32 1 1.48.2332 1.48.1 47/4 1.48.474 1-1/1 1.48.1111 3/4 1.48.34 1-1/8 1.48.118 49/4 1.48.494 1-5/32 1.48.1532 25/32 1.48.2532 1-3/1 1.48.1131 51/4 1.48.514 1-1/4 1.48.114 1.48.5-8-Piece Set Includes 9/1 thru 1 by 1th 1/2 Shanks Three flats on shank 118 Point Std Spiral For use in portable air or electric drilling in ferrous or non-ferrous metal. HSS DRILLS WOOD WOOD BORING POWER BITS Included In Set 3 1/4 1.3.14 3 5/1 1.3.51 1, 2, 3 3/8 1.3.38 3 7/1 1.3.71 1, 2, 3 1/2 1.3.12 3 9/1 1.3.91 1, 2, 3 5/8 1.3.58 1, 2, 3 3/4 1.3.34 3 13/1 1.3.131 2, 3 7/8 1.3.78 3 15/1 1.3.151 2, 3 1 1.3.1 1-1/8 1.3.118 1-1/4 1.3.114 1-3/8 1.3.138 1-1/2 1.3.112 Cuts clean accurate holes in all soft and hard woods,foam core, plastic, many metallic building sidings and foam insulation SETS Set # Qty. 1 4 pc 1.3.4 2 pc 1.3. 3 13 pc 1.3.13 DRILLS COMBINED DRILLS & TAPS COMBO TAP/DRILL Tap Tap Dimensions Thread per Inch Thread Drill Dimensions Drill Decimal Flute 32 11/1.1095 5/1 2 1.002.32 8 32 3/4.130 3/8 2-1/8 1.002.832 10 24 7/8.1520 13/32 2-3/8 1.002.1024 10 32 7/8.110 13/32 2-3/8 1.002.1032 1/4 20 15/1.2010 17/32 2-1/2 1.002.1420 5/1 18 1-1/8.2570 11/1 3 1.002.5118 3/8 1 1-1/4.3125 13/1 3-1/2 1.002.381 1/2 13 1-21/32.4250 1-1/8 4-1/4 1.002.1213 5mm 0.8 5/8.1700 13/32 2-3/8 1.002.5 mm 1.0 25/32.2030 17/32 2-1/2 1.002. 8mm 1.25 15/1.2730 11/1 2-27/32 1.002.8 10mm 1.50.9.3440 13/1 3.38 1.002.10 High-Speed Steel 118 Point Performing two operations with a single tool reduces cost -1-9
1 Drills DRILLS COMBINED DRILLS & TAPS (continued) HEX SHANK COMBO TAP/DRILL Tap Drill Thread Hex Drill. -32 1/4 0.11 0.31 0.43 1.002.032 8-32 1/4 0.14 0.37 0.50 1.002.0832 10-24 1/4 0.15 0.41 0.3 1.002.01024 10-32 1/4 0.1 0.41 0.93 1.002.01032 12-24 1/4 0.18 0.47 0. 1.002.01224 1/4-20 1/4 0.21 0.53 0.78 1.002.01420 5/1-18 1/4 0.27 0.9 0.94 1.002.05118 3/8-1 11/32 0.32 0.81 1.0 1.002.0381 7/1-14 11/32 0.38 1.00 1.25 1.002.07114 1/2-13 11/32 0.44 1.13 1.38 1.002.01213 M4X.7 1/4 3.42mm 8.00mm 13.00mm 1.002.04 M5X.8 1/4 4.34mm 10.00mm 15.00mm 1.002.005 MX1.0 1/4 5.17mm 12.00mm 17.00mm 1.002.0 M8X1.25 1/4.9mm 1.00mm 22.00mm 1.002.08 M10X1.5 11/32 8.75mm 20.00mm 24.00mm 1.002.010 1.002.05-5 Piece Machine Screw Set with Plastic Mold Case (Includes: -32, 8-32, 10-24, 10-32, 12-24) High Speed Steel with 135 Split Point Gold surface treated 1/4 and 11/32 Hex Shank can be used in Quick Change Driver More Holes Per Drill than Ordinary Twist Drills, Engineered Specifically for Cordless Power Tools Applications Include: Construction, Electrical, Maintenance, Industrial, Automotive 1.002.051-5 Piece NC Fractional Set with Plastic Mold Case (Includes: 1/4-20, 5/1-18, 3/8-1, 7/1-14, 1/2-13) 1.002.01 - Piece Metric Set with Plastic Mold Case (Includes: M4X.7, M5X.8, MX1.0, M8X1.25, M10X1.5, M12X1.75) DRILLS COMBINED DRILLS & COUNTERSINKS COMBINED DRILLS AND COUNTERSINKS Drill. Body. Inches 00.025 1/8 1-7/32 1.44.00 0 1/32 1/8 1-7/32 1.44.0 1 3/4 1/8 1-1/4 1.44.1 2 5/4 3/1 1-7/8 1.44.2 3 7/4 1/4 2 1.44.3 4 1/8 5/1 2-1/8 1.44.4 5 3/1 7/1 2-3/4 1.44.5 7/32 1/2 3 1.44. 7 1/4 5/8 3-1/4 1.44.7.0 8 5/1 3/4 3-1/2 1.44.8 High Speed Steel 118 Point Drills Ends are of Equal The Included Angle is 0 COMBINED DRILLS AND COUNTERSINKS - LONG Drill. Body. Inches 1 3/4 1/8 4 1.45.1 2 5/4 3/1 5 1.45.2 4 1/8 5/1 1.45.4 5 3/1 7/1 1.45.5 7/32 1/2 1.45. High Speed Steel 118 Point Drills Ends are of Equal The Included Angle is 0 DRILLS PREMIUM QUALITY NUMBER NUMBER DRILLS 1 3-7/8 1.03.1 2 3-7/8 1.03.2 3 3-7/8 1.03.3 4 3-3/4 1.03.4 5 3-3/4 1.03.5 3-3/4 1.03. 7 3-5/8 1.03.7.0 8 3-5/8 1.03.8 9 3-5/8 1.03.9 10 3-5/8 1.03.10 11 3-1/2 1.03.11 12 3-1/2 1.03.12 13 3-1/2 1.03.13 14 3-3/8 1.03.14 15 3-3/8 1.03.15 1 3-3/8 1.03.1 17 3-3/8 1.03.17 18 3-1/4 1.03.18 19 3-1/4 1.03.19 20 3-1/4 1.03.20 21 3-1/4 1.03.21 22 3-1/8 1.03.22 23 3-1/8 1.03.23 24 3-1/8 1.03.24 25 3 1.03.25 2 3 1.03.2 27 3 1.03.27 28 2-7/8 1.03.28 29 2-7/8 1.03.29 30 2-3/4 1.03.30 31 2-3/4 1.03.31 32 2-3/4 1.03.32 33 2-5/8 1.03.33 34 2-5/8 1.03.34 35 2-5/8 1.03.35 3 2-1/2 1.03.3 37 2-1/2 1.03.37 38 2-1/2 1.03.38 39 2-3/8 1.03.39 40 2-3/8 1.03.40 41 2-3/8 1.03.41 42 2-1/4 1.03.42 43 2-1/4 1.03.43 44 2-1/8 1.03.44 45 2-1/8 1.03.45 4 2-1/8 1.03.4 47 2 1.03.47 48 2 1.03.48 49 2 1.03.49 50 2 1.03.50 51 2 1.03.51 52 1-7/8 1.03.52 53 1-7/8 1.03.53 54 1-7/8 1.03.54 55 1-7/8 1.03.55 5 1-3/4 1.03.5 57 1-3/4 1.03.57 58 1-5/8 1.03.58 59 1-5/8 1.03.59 0 1-5/8 1.03.0 1.03.000-0-Piece Set with Index 1.03.0000 - Replacement Index 971.103-249 - Piece Shop Number Drill Asst Nitro-Carburized, Hi-Molybdenum tool steel 135 Split Point Gold surface treated -1-10
Drills 1 DRILLS GENERAL PURPOSE NUMBER GENERAL PURPOSE NUMBER DRILLS 1 3-7/8 59.1 2 3-7/8 59.2 3 3-3/4 59.3 4 3-3/4 59.4 5 3-3/4 59.5 3-3/4 59. 7 3-5/8 59.7.0 8 3-5/8 59.8 9 3-5/8 59.9 10 3-5/8 59.10 11 3-1/2 59.11 12 3-1/2 59.12 13 3-1/2 59.13 14 3-3/8 59.14 15 3-3/8 59.15 1 3-3/8 59.1 17 3-3/8 59.17 18 3-1/4 59.18 19 3-1/4 59.19 20 3-1/4 59.20 21 3-1/4 59.21 22 3-1/8 59.22 23 3-1/8 59.23 24 3-1/8 59.24 25 3 59.25 2 3 59.2 27 3 59.27 28 2-7/8 59.28 29 2-7/8 59.29 30 2-3/4 59.30 31 2-3/4 59.31 32 2-3/4 59.32 33 2-5/8 59.33 34 2-5/8 59.34 35 2-5/8 59.35 3 2-1/2 59.3 37 2-1/2 59.37 38 2-1/2 59.38 39 2-3/8 59.39 40 2-3/8 59.40 41 2-3/8 59.41 42 2-1/4 59.42 43 2-1/4 59.43 44 2-1/8 59.44 45 2-1/8 59.45 4 2-1/8 59.4 47 2 59.47 48 2 59.48 49 2 59.49 50 2 59.50 51 2 59.51 52 1-7/8 59.52 53 1-7/8 59.53 54 1-7/8 59.54 55 1-7/8 59.55 5 1-3/4 59.5 57 1-3/4 59.57 58 1-5/8 59.58 59 1-5/8 59.59 0 1-5/8 59.0 59.000-0-Piece Set with Index 1.03.0000 - Replacement Index HSS, 118 Point For portable and machine drilling Designed to perform in low and medium carbon steels, cast iron, and wood Bright finish DRILLS LETTER LETTER DRILLS a 3-7/8 1.0.1 j 4-1/8 1.0.10 s 4-7/8 1.0.19 b 4 1.0.2 k 4-1/4 1.0.11 t 4-7/8 1.0.20 c 4 1.0.3 l 4-1/4 1.0.12 u 5 1.0.21 d 4 1.0.4 m 4-3/8 1.0.13 v 5 1.0.22 e 4 1.0.5 f 4-1/8 1.0. g 4-1/8 1.0.7.0 n 4-3/8 1.0.14 o 4-1/2 1.0.15 p 4-5/8 1.0.1 w 5-1/8 1.0.23 x 5-1/8 1.0.24 y 5-1/4 1.0.25 1.0.27-2-Piece Set with Index 1.0.28 - Replacement Index 971.10-72 - Piece Assortment with Dispenser h 4-1/8 1.0.8 i 4-1/8 1.0.9 q 4-3/4 1.0.17 r 4-3/4 1.0.18 z 5-1/4 1.0.2 Premium quality Nitro-Carburized, Hi-Molybdenum tool steel 135 Split Point Gold surface treated -1-11
1 Drills DRILLS LETTER (continued) GENERAL PURPOSE LETTER DRILLS a 3-7/8 1.38.1 b 4 1.38.2 c 4 1.38.3 d 4 1.38.4 e 4 1.38.5 f 4-1/8 1.38. g 4-1/8 1.38.7.0 h 4-1/8 1.38.8 i 4-1/8 1.38.9 j 4-1/8 1.38.10 k 4-1/4 1.38.11 l 4-1/4 1.38.12 m 4-3/8 1.38.13 n 4-3/8 1.38.14 o 4-1/2 1.38.15 p 4-5/8 1.38.1 q 4-3/4 1.38.17 r 4-3/4 1.38.18 s 4-7/8 1.38.19 t 4-7/8 1.38.20 u 5 1.38.21 v 5 1.38.22 w 5-1/8 1.38.23 x 5-1/8 1.38.24 y 5-1/4 1.38.25 z 5-1/4 1.38.2 HSS 135 point Designed to perform in low and medium carbon steel, cast iron and wood DRILLS PREMIUM QUALITY METRIC METRIC JOBBER LENGTH DRILLS M1 41mm 1.40.1 M1.5 48mm 1.40.1.5 M2 51mm 1.40.2 M2.05 54mm 1.40.2.05 M2.5 0mm 1.40.2.5 M2.9 70mm 1.40.2.9 M3 70mm 1.40.3 M3.3 73mm 1.40.3.3 M3.5 73mm 1.40.3.5 M4 83mm 1.40.4 M4.2 83mm 1.40.4.2 M4.5 8mm 1.40.4.5 M5 92mm 1.40.5 M5.5 95mm 1.40.5.5 M 102mm 1.40. M.5 105mm 1.40..5 M.7 105mm 1.40..7 M7 105mm 1.40.7.0 M7.5 111mm 1.40.7.5 M8 114mm 1.40.8 M8.5 121mm 1.40.8.5 M9 124mm 1.40.9 M9.5 127mm 1.40.9.5 M10 130mm 1.40.10 M10.2 133mm 1.40.10.2 M10.5 133mm 1.40.10.5 M11 140mm 1.40.11 M11.5 143mm 1.40.11.5 M12 149mm 1.40.12 M12.5 152mm 1.40.12.5 M13 152mm 1.40.13 DRILLS GENERAL PURPOSE METRIC 1.40.01-25-Piece Set with Index 1.40.02 - Replacement Index s: 1mm to 13mm in.5mm increments Nitro-Carburized, Hi-Molybdenum tool steel 135 Split Point Gold surface treated GENERAL PURPOSE METRIC DRILLS mm mm 1.00 41 57.1 1.10 44 57.1.1 1.20 48 57.12 1.30 48 57.13 1.40 48 57.14 1.50 48 57.15 1.0 48 57.1 1.70 51 57.17 1.80 51 57.18 1.90 51 57.19 2.00 54 57.2 2.10 54 57.21 2.20 57 57.22 2.30 57 57.23 2.40 0 57.24 2.50 0 57.25 2.0 4 57.2 2.70 4 57.27 2.80 7 57.28 2.90 70 57.29 3.00 70 57.3 3.10 70 57.31 3.20 70 57.32 3.30 73 57.33 3.40 73 57.34 3.50 73 57.35 3.0 7 57.3 3.70 7 57.37 3.80 79 57.38 3.90 79 57.39 4.00 83 57.4 4.10 83 57.41 4.20 83 57.42 4.30 83 57.43 mm mm 4.40 8 57.44 4.50 8 57.45 4.0 8 57.4 4.70 89 57.47 4.80 89 57.48 4.90 92 57.49 5.00 92 57.5 5.10 92 57.51 5.20 95 57.52 5.30 95 57.53 5.40 95 57.54 5.50 98 57.55 5.0 98 57.5 5.70 98 57.57 5.80 98 57.58 5.90 98 57.59.00 98 57..10 102 57.1.20 102 57.2.30 102 57.3.40 105 57.4.50 105 57.5.0 105 57..70 105 57.7.80 105 57.8.90 105 57.9 7.00 105 57.7.0 7.10 108 57.71 7.20 108 57.72 7.30 108 57.73 7.40 111 57.74 7.50 111 57.75 7.0 111 57.7 7.70 114 57.77 mm mm 7.80 114 57.78 7.90 114 57.79 8.00 114 57.8 8.10 117 57.81 8.20 117 57.82 8.30 117 57.83 8.40 121 57.84 8.50 121 57.85 8.0 121 57.8 8.70 121 57.87 8.80 124 57.88 8.90 124 57.89 9.00 124 57.9 9.10 124 57.91 9.20 127 57.92 9.30 127 57.93 9.40 127 57.94 9.50 127 57.95 9.0 130 57.9 9.70 130 57.97 9.80 130 57.98 9.90 130 57.99 10.00 130 57.10 10.50 133 57.105 11.00 140 57.11 11.50 143 57.115 12.00 150 57.120 12.50 152 57.125 13.00 152 57.130 HSS, Black Oxide, 135 Point for portable and machine drilling The heavy construction affords efficient portable drilling in medium strength alloy material -1-12
Drills 1 DRILLS STUB LENGTH STUB LENGTH DRILLS FRACTIONAL SIZES 1/1 1-5/8 1.020.11 5/4 1-11/1 1.020.54 3/32 1-3/4 1.020.332 7/4 1-13/1 1.020.74 1/8 1-7/8 1.020.18 9/4 1-15/1 1.020.94 5/32 2-1/1 1.020.532 11/4 2-1/8 1.020.114 3/1 2-3/1 1.020.31 13/4 2-1/4 1.020.134 NUMBER SIZES 1 2-7/1 1.020.001 2 2-7/1 1.020.002 3 2-3/8 1.020.003 4 2-3/8 1.020.004 2-3/8 1.020.00 7 2-1/4 1.020.007 8 2-1/4 1.020.008 9 2-1/4 1.020.009 10 2-1/4 1.020.010 11 2-1/4 1.020.011 12 2-1/4 1.020.012 13 2-3/1 1.020.013 14 2-3/1 1.020.014 15 2-3/1 1.020.015 1 2-3/1 1.020.01 17 2-3/1 1.020.017 18 2-1/8 1.020.018 19 2-1/8 1.020.019 7/32 2-3/8 1.020.732 15/4 2-7/1 1.020.154 1/4 2-1/2 1.020.14 17/4 2-5/8 1.020.174 9/32 2-11/1 1.020.932 19/4 2-3/4 1.020.194 5/1 2-13/1 1.020.51 21/4 2-15/1 1.020.214 11/32 3 1.020.1132 23/4 3-1/1 1.020.234 3/8 3-1/8 1.020.38 25/4 3-1/4 1.020.254 13/32 3-5/1 1.020.1332 27/4 3-3/8 1.020.274 7/1 3-7/1 1.020.71 29/4 3-9/1 1.020.294 15/32 3-5/8 1.020.1532 31/4 3-11/1 1.020.314 1/2 3-3/4 1.020.12 20 2-1/8 1.020.020 21 2-1/8 1.020.021 22 2-1/8 1.020.022 24 2-1/1 1.020.024 25 2-1/1 1.020.025 2 2-1/1 1.020.02 27 2-1/1 1.020.027 28 1-15/1 1.020.028 29 1-15/1 1.020.029 30 1-15/1 1.020.030 31 1-7/8 1.020.031 32 1-7/8 1.020.032 33 1-7/8 1.020.033 34 1-7/8 1.020.034 35 1-7/8 1.020.035 3 1-13/1 1.020.03 37 1-13/1 1.020.037 38 1-13/1 1.020.038 1.020.29-29-Piece Fractional Set Special Hi-Molybdenum tool steel 135 split point Gold surface treated Made In USA 39 1-13/1 1.020.039 40 1-13/1 1.020.040 42 1-3/4 1.020.042 43 1-3/4 1.020.043 44 1-3/4 1.020.044 45 1-3/4 1.020.045 4 1-3/4 1.020.04 47 1-3/4 1.020.047 48 1-11/1 1.020.048 51 1-11/1 1.020.051 54 1-5/8 1.020.054 55 1-5/8 1.020.055 59 1-3/8 1.020.059 0 1-3/8 1.020.00 LETTER SIZES A 2-7/1 1.020.0001 B 2-1/2 1.020.0002 C 2-1/2 1.020.0003 D 2-1/2 1.020.0004 E 2-1/2 1.020.0005 F 2-5/8 1.020.000 G 2-5/8 1.020.0007 H 2-11/1 1.020.0008 I 2-11/1 1.020.0009 J 2-11/1 1.020.0010 K 2-11/1 1.020.0011 L 2-3/4 1.020.0012 M 2-3/4 1.020.0013 N 2-15/1 1.020.0014 O 2-15/1 1.020.0015 P 2-15/1 1.020.001 Q 3 1.020.0017 R 3 1.020.0018 S 3-1/1 1.020.0019 T 3-1/1 1.020.0020 DRILLS AUTOBODY U 3-1/8 1.020.0021 V 3-1/4 1.020.0022 W 3-1/4 1.020.0023 X 3-5/1 1.020.0024 Z 3-3/8 1.020.002 FRACTIONAL 7/4 1-7/8 1.02.74 1/8 2 1.02.18 9/4 2 1.02.94 5/32 2-1/1 1.02.532 3/1 2-3/1 1.02.31 7/32 2-3/8 1.02.732 1/4 2-1/2 1.02.14 WIRE 30 2 1.02.30 Stuby, double ended drills For drilling truck and auto bodies or any thin sheet metal 135 Self-Centered split point aids in penetration Also popular for drilling out pull rivets Black finish M2 HSS BODY DRILLS 1/8 1-15/1 1.021.18 3/1 2-5/1 1.021.31 1/4 2-5/8 1.021.14 Double ended, stub length Special Hi-Molybdenum tool steel for superior performance Gold surface treated 135 split point for fast, accurate starting -1-13
fi CUTTING TOOLS 1 Drills SPOT WELD DRILL BITS DRILLS SPOT WELD Special Spot Weld Tips Bulk Pack (20 Drills) M.5 90 mm 1.1.5 1.1.5.1 M8 90 mm 1.17.8 1.17.8.1 3 Flats on the shanks - virtually eliminates chuck slippage Gold surface treated M7 High Speed Tool Steel to handle hard welds Made in the U.S.A. with ShopPro Quality COBALT SPOT WELD DRILL BITS Inches Flat Inches Type M.5 1.5.44 Single End 97.10080 M8 1.9.75 Single End 97.10083 M8 1.75 None Single End 97.10085 M8 2.25 None Single End 97.10081 M8 3.2 None Double End 97.10095 M10 1.75 None Single End 97.10084 M10 2.25 None Single End 97.10082 Special Spot Weld Tip Cobalt Steel Allows 30% greater drill speed than high speed steel For use in pneumatic drill Heavy-Duty Spur Point COBALT HIGH SPEED STEEL SPOT WELD DRILL BIT Flat Type Inches M8 80mm None Single End 97.10100 M8 80mm none Single End titanium coated 97.10101 Specialized head for efficient cutting of spot welds Specialized head to maximum usage life of bit High speed steel and cobalt composition 8.0 mm or 5/1th is most popular spot weld bit size 80 mm length for use in any drill TIN COATED COBALT SPOTWELD DRILL BIT M8 2.25 97.1009 M10 2.25 97.10097 Titanium Coated M-42 cobalt steel spotweld drill Designed for use in high strength high alloy steel commonly used in the automobile industry. TIN coating doubles the tool life by giving additional lubricity. TIN coated drills require a slower speed (490 RPM) than standard drills (1800 RPM) when drilling difficult materials. Heavy-Duty Spur Point For use in electric drills WINZER MARKSMAN SPOT WELD DRILL BITS Flute Type Material M.5 5mm 35mm Single End HSS 1.17.5 M8 70mm 40mm Single End HSS 1.17.9 M10 80mm 50mm Single End HSS 1.17.10 M8 70mm 40mm Single End Cobalt** 97.10079 HSS Improved centering tip is suitable for high strength car body sheets Optimised geometry of the tip allows for a longer service life than conventional spot weld drills Suitable for use in any standard drill Designed to drill out spot weld without drilling into the 2nd panel **Denotes Cobalt Black oxide and lubricity treated BORON SPOTWELD CUTTER M8 2.00" 0.075** M8 1.75" 0.070 Made from Solid Carbide Double coated for extra durability Self centering point Use in spotweld guns only Removes spotwelds in boron and other ultra high strength steels Recommended 900-1000 RPM ** Round Shank LENOX VARI-BITS Photo A B C Hole s Inches (mm) 1/8, 5/32, 3/1, 7/32, 1/4, 9/32, 5/1,11/32, 3/8, 13/32, 7/1, 15/32, 1/2, (3, 4, 4.5, 5.5,, 7, 8, 8.5, 9.5, 10, 11, 12, 12.5) 9/1, 5/8, 11/1, 3/4, 13/1, 7/8, 15/1, 1 (14, 1, 17.5, 19, 20.5, 22, 23.5, 25) 1/4, 5/1, 3/8, 7/1, 1/2, 9/1, 5/8, 11/1, 3/4 (, 8, 9.5, 11, 12.5, 14, 1, 17.5, 19) DRILLS STEP DRILL BITS Electric Drill Inches (mm) Lenox Part No. 1/4 () & larger VB1* 1.11.1 3/8 (9.5) & larger VB2* 1.11.2 3/8 (9.5) & larger VB3* 1.11.3 D 3/1, 1/4, 5/1, 3/8, 7/1, 1/2 (4.5,, 8, 9.5, 11, 12.5) 3/8 (9.5) & larger VB4 1.11.4 E 7/8 (for 1/2 conduit) (22) (12.5) 3/8 (9.5) & larger VB7 1.11.7.0 F 3/1, 1/4, 5/1, 3/8, 7/1, 1/2 9/1, 5/8, 11/1, 3/4, 13/1, 7/8 4.5,, 8, 9.5, 11, 12.5, 14, 1, 17.5, 19, 20.5, 22 3/8 (9.5) & larger VB8 1.11.8 G 7/8, 1-1/8 (22, 28.5) for 1/2 & 3/4 conduit 3/8 (9.5) & larger VB11 1.11.11 H 7/8, 1-1/8, 1-7/32, 1-1/4, 1-3/8(22, 28.5, 31, 32, 35) 3/8 (9.5) & larger VB12 1.11.12 Double fluted for faster cutting 3 Pc. Set Three flats on the shanks 1.11.093 Cuts up to 1/8 (3mm) thick materials Works in stainless steel, mild steels, cast iron, plastic and wood Can be used to ream and debur holes * Included in 3pc set #1.11.093 A B C D E F G H -1-14
Drills 1 DRILLS STEP DRILL BITS (continued) STEP DRILLS Hole s 1/8, 5/32, 3/1, 7/32, 1/4, 9/32, 5/1, 11/32, 3/8, 13/32, 7/1, 15/32, 1/2 Shank 1/4 1.110.700 3/1,1/4, 5/1, 3/8, 7/1, 1/2 1/4 1.110.701 3/1,1/4, 5/1, 3/8, 7/1, 1/2, 9/1, 5/8, 11/1, 3/4, 13/1, 7/8 3/8 1.110.702 1/4, 5/1, 3/8, 7/1, 1/2, 9/1, 5/8, 11/1, 3/4 3/8 1.110.703 9/1, 5/8, 11/1, 3/4, 13/1, 7/8, 15/1, 1 3/8 1.110.704 13/1,27/32, 7/8, 29/32, 15/1, 31/32, 1, 1-1/32, 1-1/1, 1-1/18 3/8 1.110.710 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/18, 1-1/4, 1-3/8 3/8 1.110.711 1.110.700 1.110.703 Special moly alloy steel Gold surface treated Dual flute construction drills clean accurate holes in thin material 3 flats on shank Use for all thin metals, rigid plastics such as plexiglass, and wood or material ECONOMY STEP DRILLS Hole s Inches (mm) 1/8, 5/32, 3/1, 7/32, 1/4, 9/32, 5/1,11/32, 3/8, 13/32, 7/1, 15/32, 1/2, (3, 4, 4.5, 5.5,, 7, 8, 8.5, 9.5, 10, 11, 12, 12.5) Electric Drill Inches (mm) 1/4 () & larger 1.11.01 DRILLS HEX SHANK HEX SHANK DRILL BITS 3/32 1.13.332 1/4 hex hanks For cordless screwdrivers and drill motors Black Finish DRILLS GLASS & TILE GLASS AND TILE DRILLS 1/8 1.5.18 3/1 1.5.31 1/4 1.5.14 5/1 1.5.51 3/8 1.5.38 1/2 1.5.12 Carbide tipped Used for drilling glass, tiles, ceramics, and other hard fragile materials without chipping or cracking Using liquid coolant such as CleanTap (#891.73280 or #891.73282) is recommended for best results GROO-V TIP BIT Part# 5-PIECE KIT 1.5.5 1/8 x 3" 1.5.183 Includes: 3/1 x 4" 1.5.314 Part# 1/4 x4" 1.5.144 3/1x Non-Stock 1/4 x " 1.5.14 1/4x 1.5.14 5/1 x " 1.5.51 5/1x 1.5.51 3/8 x " 1.5.38 3/8x 1.5.38 1/2 x " 1.5.12 1/2x 1.5.12 Applications: Tile*, Marble*, Granite*, Masonry, Cast Iron, Plastic, Wood, Hardened Steel Percussion or rotary-only, the Groo-V tip bit makes holes in almost all materials! Engineered for drilling hard materials, these specialized Ram Tip Bits have a serrated carbide tip, which penetrates faster - up to 50% faster than standard masonry bits! (A drill press or supported drill motor is recommended for drilling hard metals.) *Because of the differing densities of these materials, the number of holes may vary. Slow drilling speeds are recommended, and in some cases, marble and granite may not be drillable with carbide tools DRILLS STRAIGHT SHANK MASONRY SETS STRAIGHT SHANK SET Joran 1.35.4 JRP-SET4 1.35. JRP-SET s 5/32 x3, 3/1 x3-1/2,1/4 x4-1/4, 1/4 x, 5/1 x4-3/4, 3/8 x4/1/2, 1/2 x-3/4 5/32 x, 3/1 x, 1/4 x4-1/4, 1/4 x, 5/1 x, 3/8 x, 1/2 x-3/4 1.35.4-1-15
1 Drills DRILLS MASONRY UNIVERSAL MULTI-PURPOSE MASONRY DRILL 1/8 2-1/2 1.331.18 5/32 3 1.331.532 3/1 3-1/2 1.331.31 1/4 4 1.331.14 5/1 5 1.331.51 3/8 5 1.331.38 1/2 1.331.12 5/8 1.331.58 For rotary drilling only Drills through steel, cast iron, marble, granite, ceramic, stone, brick and concrete Carbide tipped Ground body thermally treated for longer life SDS SHANK MASONRY DRILL BITS Over-All 3/1 4 1.32.314 3/1 1.32.31 3/1 8 1.32.318 3/1 12 1.32.3112 1/4 4 1.32.144 1/4 1.32.14 5/1 1.32.51 5/1 12 1.32.5112 3/8 1.32.38 3/8 12 1.32.3812 1/2 1.32.12 1/2 12 1.32.1212 5/8 1.32.58 5/8 12 1.32.5812 3/4 12 1.32.3412 7/8 12 1.32.7812 1 12 1.32.112 For use with industrial rotary hammer drills with SDS chucks Industrial grade carbide tips Made in Europe SDS-PLUS Drill 1/4 908.0.14. 1/2 12-1/4 908.0.12.12 1/2-1/4 908.0.12. 1/2 10 908.0.12.10 1/2 10-1/4 908.0.12.10 1/2 18 908.0.12.18 1/4 8-1/4 908.0.14.8 1/4 11 908.0.14.11 1/4 1 908.0.14.1 11/1 10 908.0.111.10 3/1 4-1/4 908.0.31.4 3/1-1/4 908.0.31. 3/1 8-1/4 908.0.31.8 3/1 10 908.0.31.10 3/8 8 908.0.38.8 3/8-1/4 908.0.38. 3/8 10-1/4 908.0.38.10 3/8 12-1/4 908.0.38.12 3/8 18 908.0.38.18 5/1-1/4 908.0.51. 5/1 12 908.0.51.12 5/32-1/4 908.0.532. 5/8 8 908.0.58.8 5/8 12 908.0.58.12 5/8 18 908.0.58.18 7/8 8 908.0.78.8 7/8 14 908.0.78.14 7/8 18 908.0.78.18 1 10 908.0.1.10 PREMIUM ROTO/PERCUSSION DRILL BITS Shank Joran. 1/8 1/8 3 JRP-1 1.35.183 5/32 5/32 JRP-2A 1.35.532 3/1 3/1 3-1/2 JRP-4 1.35.31312 3/1 3/1 JRP-5 1.35.31 1/4 1/4 4-1/4 JRP-9 1.35.14414 1/4 1/4 JRP-10 1.35.14 1/4 1/4 13 JRP-11 1.35.1413 5/1 5/1 4-3/4 JRP-18 1.35.51434 5/1 5/1 JRP-20 1.35.51 5/1 5/1 13 JRP-22 1.35.5113 3/8 3/8 4-1/2 JRP-29A 1.35.38412 3/8 3/8 JRP-30 1.35.38 3/8 3/8 13 JRP-32 1.35.3813 7/1 3/8-1/4 JRP-41 1.35.7114 1/2 3/8 JRP-4 1.35.1234 1/2 3/8 13 JRP-49 1.35.1213 5/8 3/8 JRP-3 1.35.58 3/4 3/8 JRP-72 1.35.34 7/8 1/2 JRP-80 1.35.78 A straight shank bit for professional use For drilling brick, concrete, cinder block, stone, etc. mond ground tungsten carbide tip is copper brazed Heat-resistant up to 1800 F CONCRETE SCREW DRILL BITS D L 5/32 3-1/2 929.0.532.312 5/32 4-1/2 929.0.532.412 5/32 5-1/2 929.0.532.512 3/1 3-1/2 929.0.31.312 3/1 4-1/2 929.0.31.412 3/1 5-1/2 929.0.31.512 3/1-1/2 929.0.31.12 3/1 7-1/2 929.0.31.712 For use with concrete screws ( Prefix 929) The drill bits are special size and tolerance for use with concrete screws ECONOMY STRAIGHT SHANK MASONRY DRILL BITS Over-All 1/8 3 1.33.183 3/1 4 1.33.314 1/4 4 1.33.144 5/1 4 1.33.514 3/8 4 1.33.384 7/1 1.33.71 1/2 1.33.12 9/1 1.33.91 5/8 1.33.58 3/4 1.33.34 1 1.33.1 For rotary and rotary hammer drills with straight shank chucks Industrial grade carbide tips Made in Europe TAPCON SDS HEX TYPE SCREW ANCHOR DRILL BITS Usable Over-All 5/32 2 3-1/2 1.32.312 5/32 4 7 1.1.32.5327 3/1 4 7 1.1.32.317 For use with industrial rotary hammer drills with SDS chucks Industrial grade carbide tips Made in Europe HEAVY-DUTY STRAIGHT SHANK Drill Usable 1/4 4 908.1.14. 3/8 11 13 908.1.38.13 1/2 11 13 908.1.12.13 5/8 11 13 908.1.58.13-1-1
Taps & Dies 2 TAPS TAP & DIE SETS 40 PIECE, STRAIGHT FLUTE TAPS & HEX DIES 1.24.5 Set contains: 1 each straight flute taps & hex dies sizes: 4-40, -32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/1-18, 5/1-24, 3/8-1, 3/8-24, 7/1-24, 7/1-20,1/2-13, 1/2-20 & 1/8-27. 1 each pipe tap size: 1/8-27. T-Handle tap wrenches: 0-1/4 & 3/1-1/2, straight handle tap wrench: #4-1/2, die stock, screw pitch gauge & screw driver. Supplied in sturdy red plastic case. 40 PIECE, SPIRAL POINT TAPS & HEX DIES 1.24.10 Set contains: 1 each spiral point taps & hex dies sizes: 4-40, -32, 8-32, 10-24, 10-32, 12-24, 1/4-20,1/4-28, 5/1-18, 5/1-24, 3/8-1, 3/8-24,7/1-24,7/1-20,1/2-13, 1/2-20 & 1/8-27. 1 each pipe tap size: 1/8-27. T-Handle tap wrenches:0-1/4 & 3/1-1/2, straight handle tap wrench: #4-1/2, die stock, screw pitch gauge & screwdriver. Supplied in sturdy red plastic case. 23-PIECE, METRIC SPIRAL POINT TAPS & HEX DIES 1.24.12 Set contains: 1 each spiral point taps & hex dies sizes: 3.0-0.50, 3.5-0.0, 4.0-0.70, 5.0-0.80,.0-1.00, 8.0-1.25, 10.0-1.50, 12.0-1.75. 1 each pipe tap and hex die size 1/8-27. T-handle tap wrenches: 0-1/4 and 3/1-1/2. Straight handle tap wrench: #4-1/2. Die stock, screw pitch gauge & screwdriver. Supplied in a sturdy red plastic case. REPLACEMENT TOOLS FOR ABOVE SETS Description T-handle tap wrench 0-1/4 1.24.15 Stght handle tap wrench #4-1/2 1.24.25 Replacement tap & die case 1.24.35 Die stock 1.24.50 Die stock screw driver 1.24.45 37 PIECE, METRIC PLUG TAPS & HEX DIES 1.24.05 Set contains: 1 each Plug taps & hex dies sizes: 3mm x 0.50, 3mm x 0.0, 4mm x 0.70, 4mm x 0.75, 5mm x 0.80, 5mm x 0.90, mm x 1.00, 7mm x 1.00, 8mm x 1.25, 9mm x 1.00, 9mm x 1.25, 10mm x 1.25, 10mm x 1.50, 11mm x 1.50, 12mm x 1.50, 12mm x 1.75, 1 each pipe tap & hex dies: 1/8-27. 1 each T-Handle tap wrenche: 0 to 1/4 1 each T-Handle tap wrenche: 3/1 to 1/2 1 each die stock CARBON STEEL 40 PIECE, STRAIGHT FLUTE TAPS & HEX DIES 1.24.51 Set contains: 1 each straight flute taps & hex dies sizes: 4-40, -32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/1-18, 5/1-24, 3/8-1, 3/8-24, 7/1-24, 7/1-20,1/2-13, 1/2-20 & 1/8-27. 1 each pipe tap size: 1/8-27. T-Handle tap wrenches: 0-1/4 & 3/1-1/2, straight handle tap wrench: #4-1/2, die stock, screw pitch gauge & screw driver. Supplied in sturdy red plastic case. RATCHETING TAP WRENCHES Description Tap Capacity Square Drive Extra Large Capacity 3/8-5/8 11/32-1/2 1.5 3-1/2 Long 1/1-1/4 5/4-13/4 1. 4-1/4 Long 1/4-1/2 3/1-5/1 1.7 10 Long 1/1-1/4 5/4-13/4 1.8 12 Long 1/4-1/2 3/1-5/1 1.9 Parallel-clamping steel jaws and knurled chuck provide a secure, firm grip on hex or square drives Adjustable T-Handle may be slipped from side to side for positioning convenience and added leverage in tight spaces. With a flick of the ratchet selection switch, it can be easily set for left or right-handed operation, or locked for non-ratcheting use. T-HANDLE TAP WRENCHES Tap Capacity #0 to 1/4 #2 1.2 #12 to 1/2 #4 1.4 For use with hand taps ADJUSTABLE TAP WRENCH For Tap s 4-40 - 1/2 7-3/4 1.24.25 1/4-3/4 13 1.24.2 For use with hand taps and reamers -2-1
2 Taps & Dies TAPS TAP & DRILL SETS TAP & DRILL SETS Description Set Contents Replacement Stand/Index 10 Piece ShopPro Tap & Drill Set Jobbers drill size: 31/4; S&D drill sizes: 17/32, 21/32, 49/4, 7/8; Straight flute tap sizes: 9/1-12, 5/8-11, 3/4-10, 7/8-9, 1-8. All tools supplied in a metal index. 1.14.0010 12 Piece ShopPro Tap & Drill Set Jobbers drill sizes: #3, 29, 25, 21, 7, F; Spiral point tap sizes: -32, 8-32, 10-24, 10-32, 1/4-20, 5/1-18. All tools supplied in a metal index. 1.14.0012 18 Piece ShopPro Tap & Drill Set UNC Jobbers drill sizes: #3, 29, 25, 21, 7, F, 5/1, U, 27/4; Spiral point tap sizes: -32, 8-32, 10-24, 10-32, 1/4-20, 5/1-18, 3/8-1, 7/1-14, 1/2-13. All tools supplied in a metal index. 1.14.0018 1.14.18 18 Piece ShopPro Tap & Drill Set UNF 18 Piece ShopPro Tap & Drill Set Metric Jobbers drill sizes: #33, 29, 25, 21, 3, 1, Q, 25/4, 29/4; Spiral pint tap sizes: -40, 8-3, 10-24, 10-32, 1/4-28, 5/1-24, 3/8-24, 7/1-20, 1/2-20. All tools supplied in a metal index. Jobbers drill sizes: (mm) 2.05, 2.50, 2.90, 3.30, 4.20, 5.00,.70, 8.50, 10.20; Spiral point tap sizes: (mm) 2.50-0.45, 3.00-0.50, 3.50-0.0, 4.00-0.70, 5.00-0.80,.00-1.00, 8.00-1.25, 10.0-1.25, 12.00-1.75. All tools supplied in a metal index. 1.14.0019 1.14.0025 43 Piece ShopPro Tap & Drill Assortment Jobber drill sizes: (mm) 2.5, 3.3, 4.2, 5,.7, 8.5, 10.2; Plug tap sizes: 3.00-0.50, 4.0-0.70, 5.0-0.80,.0-1.00, 8.00-1.25, 10.0-1.50, 12.0-1.75 1.14.02 1.14.002 All tools supplied in metal dispenser 40 Piece ShopPro Tap & Drill Assortment Jobber drill sizes: (mm) 2.05, 2.5, 3.3, 4.2, 5,.7, 8.5, 10.2; Spiral Point tap sizes: 2.5-.45, 3.0-.50, 3.5-., 4-.7, 5-.8, -1.0, 8-1.25, 10-1.5, 971.114 1.14.002 12-1.75, #2 T-Handle tap wrench, All tools supplied in metal dispenser Super premium taps and dies made from special Hi-Tungsten and Hi-Molybdenum tool sets Gold surface treated for maximum lubricity Precision ground tap threads for the ultimate in precision and accuracy TAP SETS Description Set Contents 10 Piece ShopPro Spiral Point Plug Tap Set Spiral point tap sizes: 1 ea. 1/4-20, 1/4-28, 5/1-18, 5/1-24, 3/8-1, 3/8-24, 7/1-14, 7/1-20, 1/2-13, 1/2-20. All tools supplied in a metal index. 1.14.1.10 10 Piece ShopPro Straight Flute Plug Tap Set Straight flute tap sizes: 1 ea. 1/4-20, 1/4-28, 5/1-18, 5/1-24, 3/8-1, 3/8-24, 7/1-14, 7/1-20, 1/2-13, 1/2-20. All tools supplied in a metal index. 1.14.1.11 Super premium taps made from special Hi-Tungsten and Hi-Molybdenum tool steel Gold surface treated for maximum lubricity Precision ground tap threads for the ultimate in precision and accuracy TAPS SUPER HIGH PERFORMANCE SUPER HIGH PERFORMANCE TAPS Number of Flutes -32 2 1.145.32 8-32 3 1.145.832 10-24 3 1.145.1024 10-32 3 1.145.1032 Number of Flutes 1/4-28 3 1.145.1428 5/1-18 3 1.145.5118 5/1-24 3 1.145.5124 3/8-1 3 1.145.381 1/4-20 3 1.145.1420 3/8-24 3 1.145.3824 Spiral point plug CNC style specifically designed for stainless steel and other hardened and exotic grades of steel Made from premium high speed steel for optimum tool life -2-2
Taps & Dies 2 TAPS PREMIUM QUALITY NITRO SERIES SPIRAL POINT TAPS Number of Flutes 2-5 2 1.140.25 3-48 2 1.140.348 4-40 2 1.140.440 4-48 2 1.140.448 5-40 2 1.140.540-32 2 1.140.32-40 2 1.140.40 8-32 2 1.140.832 8-3 2 1.140.83 10-24 2 1.140.1024 10-32 2 1.140.1032 12-24 2 1.140.1224 12-28 2 1.140.1228 1/4-20 2 1.140.1420 1/4-28 2 1.140.1428 5/1-18 2 1.140.5118 5/1-24 2 1.140.5124 Number of Flutes 3/8-1 3 1.140.381 3/8-24 3 1.140.3824 7/1-14 3 1.140.7114 7/1-20 3 1.140.7120 1/2-13 3 1.140.1213 1/2-20 3 1.140.1220 9/1-12 3 1.140.9112 9/1-18 3 1.140.9118 5/8-11 3 1.140.5811 5/8-18 3 1.140.5818 3/4-10 3 1.140.3410 3/4-1 3 1.140.341 1-14 3 1.140.114 Ideal for quick tapping of through holes Spiral point design drives chips ahead of the tap Excellent for use in stainless steel and other hard metals Made exclusively of super high speed steel, and heat treated to maximize the advanced heat resistance characteristics of tungsten and the wear resistance of vanadium Premium Quality Made in USA SPIRAL POINT TAPS Number of Flutes Number of Flutes 2-5 2 1.14.25 2-4 2 1.14.24 3-48 2 1.14.348 3-5 2 1.14.35 4-40 2 1.14.440 4-48 2 1.14.448 5-40 2 1.14.540 5-44 2 1.14.544-32 2 1.14.32-40 2 1.14.40 8-32 2 1.14.832 8-3 2 1.14.83 10-24 2 1.14.1024 10-32 2 1.14.1032 12-24 2 1.14.1224 12-28 2 1.14.1228 1/4-20 2 1.14.1420 1/4-28 2 1.14.1428 5/1-18 2 1.14.5118 5/1-24 2 1.14.5124 3/8-1 3 1.14.381 3/8-24 3 1.14.3824 7/1-14 3 1.14.7114 7/1-20 3 1.14.7120 1/2-13 3 1.14.1213 1/2-20 3 1.14.1220 5/8-11 3 1.14.5811 5/8-18 3 1.14.5818 3/4-10 3 1.14.3410 3/4-1 3 1.14.341 Metric Number of Flutes Metric Metric M 2.5 x.45 2 1.14.25 M 3.0 x.50 2 1.14.3 M 3.5 x. 2 1.14.35 M 4 x.7 2 1.14.4 M 5 x.8 2 1.14.5 M x 1 2 1.14. M 8 x 1.25 2 1.14.8 M 8 x 1.00 2 1.14.08 M 10 x 1.5 3 1.14.10 M 10 x 1.25 3 1.14.010 M 12 x 1.75 3 1.14.12 M 12 x 1.25 3 1.14.012 M 14 x 1.50 3 1.14.014 M 1 x 2 3 1.14.01 Ideal for quick tapping of through holes Spiral point design drives chips ahead of the tap Excellent for use in stainless steel and other hard metals Precision ground threads Gold surface treated Special high speed tungsten/molybdenum tool steel -2-3
2 Taps & Dies TAPS SHOP PRO PREMIUM QUALITY SUPER HIGH SPEED STEEL STRAIGHT FLUTE TAPS Tap Sets 3 Pcs. Sets Taps Taper Taps Plug Taps Bottoming 2-5 1.19.25 1.22.25 1.20.25 3-48 1.19.348 1.22.348 1.21.348 1.20.348 4-40 1.19.440 1.22.440 1.21.440 1.20.440 5-40 1.19.540 1.22.540 1.21.540 1.20.540-32 1.19.32 1.22.32 1.21.32 1.20.32-40 1.22.40 1.21.40 1.20.40 Taper Plug Bottoming 8-32 1.19.832 1.22.832 1.21.832 1.20.832 8-3 1.19.83 1.22.83 1.21.83 1.20.83 10-24 1.19.1024 1.22.1024 1.21.1024 1.20.1024 10-32 1.19.1032 1.22.1032 1.21.1032 1.20.1032 12-24 1.19.1224 1.22.1224 1.21.1224 1.20.1224 12-28 1.19.1228 1.22.1228 1.21.1228 1.20.1228 1/4-20 1.19.1420 1.22.1420 1.21.1420 1.20.1420 1/4-28 1.19.1428 1.22.1428 1.21.1428 1.20.1428 5/1-18 1.19.5118 1.22.5118 1.21.5118 1.20.5118 5/1-24 1.19.5124 1.22.5124 1.21.5124 1.20.5124 3/8-1 1.19.381 1.22.381 1.21.381 1.20.381 TAPER TAPS First 8 to 10 threads are chamfered for easy threading in most any material. PLUG TAPS First 3 to 5 threads are chamfered for intermediate use when tapping to the bottom of the hole is not required. BOTTOMING TAPS First 1-1/2 threads are chamfered for use after initial threads have been started and tapping all the way to the bottom of the hole is required. In blind holes tapped by hand to the very bottom, all three taps (i.e. taper, plug and bottoming) should be used in the order named. 3/8-24 1.19.3824 1.22.3824 1.21.3824 1.20.3824 7/1-14 1.19.7114 1.22.7114 1.21.7114 1.20.7114 7/1-20 1.19.7120 1.22.7120 1.21.7120 1.20.7120 1/2-13 1.19.1213 1.22.1213 1.21.1213 1.20.1213 1/2-20 1.19.1220 1.22.1220 1.21.1220 1.20.1220 9/1-12 1.19.9112 1.22.9112 1.21.9112 1.20.9112 9/1-18 1.19.9118 1.22.9118 1.21.9118 1.20.9118 5/8-11 1.19.5811 1.22.5811 1.21.5811 1.20.5811 5/8-18 1.19.5818 1.22.5818 1.21.5818 1.20.5818 3/4-10 1.19.3410 1.22.3410 1.21.3410 1.20.3410 3/4-1 1.19.341 1.22.341 1.21.341 1.20.341 7/8-9 1.19.789 1.22.789 1.21.789 1.20.789 7/8-14 1.19.7814 1.22.7814 1.21.7814 1.20.7814 1-8 1.19.18 1.22.18 1.21.18 1.20.18 1-12 1.19.112 1.22.112 1.21.112 1.20.112 1-14 1.19.114 1.22.114 1.21.114 1.20.114 1-1/8-7 1.19.1187 1.22.1187 1.21.1187 1.20.1187 1-1/8-12 1.19.11812 1.22.11812 1.21.11812 1.20.11812 1-1/4-7 1.19.1147 1.22.1147 1.21.1147 1.20.1147 1-1/4-12 1.22.11412 1-3/8-1.22.138 1.20.138 1-3/8-12 1.22.13812 1.20.13812 1-1/2-1.19.112 1.22.112 1.21.112 1.20.112 1-1/2-12 1.19.11212 1.22.11212 1.21.11212 1.20.11212 Special high-speed, Hi-Tungsten and Molybdenum tool steel Surface treatment for maximum lubricity Highly Accurate Ground Threads Made in U.S.A. Each tap set contains one each of the taper, plug and bottoming style taps -2-4
Taps & Dies 2 TAPS HIGH SPEED STEEL 52 SPIRAL FLUTE BOTTOM TAPS Number of Flutes -32 3 3.14.32 8-32 3 3.14.832 Number of Flutes 10-24 3 3.14.1024 3/8-1 3 3.14.381 Made from premium M-7 High Speed Steel Designed for precision tapping of modern, difficult to machine metals Fast spiral flutes efficiently removes chips and prevents broken taps due to clogged flutes particularly in ductile and stringy material LEFT HAND TAPS NUT Number of Flutes 1/4-20 2-1/2 4 4.15.1420 5/1-18 2-23/32 4 4.15.5118 Number of Flutes 1/2-13 3-3/8 4 4.15.1213 1/2-20 3-3/8 4 4.15.1220 Ground Thread-High Speed Steel TAPS METRIC HIGH SPEED STEEL HIGH SPEED STEEL TAPS METRIC Tap Drill Number of Flutes (Taper) (Plug) (Bottoming) M3-.50 40 3 5.1.03.50 5.03.50 5.2.03.50 M4-.70 1/8 4 5.1.04.70 5.04.70 5.2.04.70 M4.5-.75 1/8 4 5.04.75 5.2.04.75 M5-.80 11/4 4 5.1.05.80 5.05.80 5.2.05.80 M-1.00 10 4 5.1.0.1 5.0.1 5.2.0.1 M-1.25 10 4 55.0.25 M7-1.00 15/4 4 5.1.07.1 5.07.1 5.2.07.1 M8-1.00 F 4 5.1.08.1 5.08.1 5.2.08.1 M8-1.25 17/4 4 5.1.08.125 5.08.125 5.2.08.125 M10-1.00 23/4 4 5.010.1 M10-1.25 S 4 5.1.010.125 5.010.125 5.2.010.125 M10-1.50 11/32 4 5.1.010.150 5.010.150 5.2.010.150 M12-1.25 27/4 4 5.1.012.125 5.012.125 5.2.012.125 M12-1.75 27/4 4 5.1.012.175 5.012.175 5.2.012.175 M14-1.50 1/2 4 5.1.014.150 5.014.150 5.2.014.150 M14-2.00 15/32 4 5.1.014.2 5.014.200 5.2.014.200 M1-1.50 37/4 4 5.1.01.150 5.01.150 5.2.01.150 M1-2.00 35/4 3 5.1.01.2 5.01.200 5.2.01.200 M18-1.50 21/32 4 5.1.018.150 5.018.150 5.2.018.150 M18-2.00 5/8 4 5.018.200 5.2.018.200 M18-2.50 39/4 4 5.1.018.250 5.018.250 M20-1.50 47/4 4 5.1.020.150 5.020.150 5.2.020.150 M20-2.50 11/1 4 5.1.020.250 5.020.250 5.2.020.250 M22-1.50 13/1 4 5.022.150 M24-2.00 7/8 4 5.024.200 M24-3.00 27/32 4 5.024.300 5.2.024.300 M30-3.50 1-3/4 4 5.030.350 M3-4.00 1-1/4 4 5.2.03.400 Straight fluted taps with standard chamfers Recommended for tapping stainless steel, free machining steel, aluminum, ductile materials, zinc and magnesium Made of high speed steel -2-5
2 Taps & Dies TAPS CARBON STEEL MACHINE SCREW SIZES HI-CARBON STEEL TAPS U.S. SIZES Tap Sets 3 Pcs. Sets Taps Taper Taps Plug Taps Bottoming 4-40NC 3.20.440 5-40NC 3.21.540 3.20.540-32NC 3.21.32 3.22.32 3.20.32 8-32NC 3.19.832 3.21.832 3.22.832 3.20.832 8-3NF 3.22.83 8-40NF 3.22.840 10-24NC 3.19.1024 3.21.1024 3.22.1024 3.20.1024 10-32NF 3.19.1032 3.21.1032 3.22.1032 3.20.1032 12-24NC 3.19.1224 3.21.1224 3.22.1224 3.20.1224 These items are manufactured to U.S. industrial specifications. Made of super tough carbon steel, these taps are ideal for hand tapping applications. All taps have the size drill to use permanently marked on the tap. H Limit 3 FRACTIONAL SIZES Tap Sets Taps Taps Taps 3 Pcs. Sets Taper Plug Bottoming 1/4-20NC 4.19.1420 4.21.1420 4.22.1420 4.20.1420 1/4-28NF 4.19.1428 4.21.1428 4.22.1428 4.20.1428 5/1-18NC 4.19.5118 4.21.5118 4.22.5118 4.20.5118 5/1-24NF 4.19.5124 4.21.5124 4.22.5124 4.20.5124 3/8-1NC 4.19.381 4.21.381 4.22.381 4.20.381 3/8-24NF 4.19.3824 4.21.3824 4.22.3824 4.20.3824 7/1-14NC 4.19.7114 4.21.7114 4.22.7114 4.20.7114 7/1-20NF 4.21.7120 4.22.7120 1/2-13NC 4.19.1213 4.21.1213 4.22.1213 4.20.1213 1/2-20NF 4.19.1220 4.21.1220 4.22.1220 4.20.1220 9/1-12NC 4.19.9112 4.21.9112 4.22.9112 4.20.9112 9/1-18NF 4.19.9118 4.21.9118 4.22.9118 4.20.9118 5/8-11NC 4.19.5811 4.21.5811 4.22.5811 4.20.5811 5/8-18NF 4.19.5818 4.21.5818 4.22.5818 4.20.5818 3/4-10NC 4.19.3410 4.21.3410 4.22.3410 4.20.3410 3/4-1NF 4.19.341 4.21.341 4.22.341 4.20.341 7/8-9NC 4.19.789 4.21.789 4.22.789 4.20.789 7/8-14NF 4.19.7814 4.21.7814 4.22.7814 4.20.7814 1-8NC 4.19.18 4.21.18 4.22.18 1-12NF 4.19.112 4.22.112 4.20.112 These items are manufactured to U.S. industrial specifications. Made of super tough carbon steel, these taps are ideal for hand tapping applications. All taps have the size drill to use permanently marked on the tap. H Limit 3 Taper Plug Bottoming TAPER TAPS First 8 to 10 threads are chamfered for easy threading in most any material. PLUG TAPS First 3 to 5 threads are chamfered for intermediate use when tapping to the bottom of the hole is not required. BOTTOMING TAPS First 1-1/2 threads are chamfered for use after initial threads have been started and tapping all the way to the bottom of the hole is required. In blind holes tapped by hand to the very bottom, all three taps (i.e. taper, plug and bottoming) should be used in the order named. Taper Plug Bottoming TAPER TAPS First 8 to 10 threads are chamfered for easy threading in most any material. PLUG TAPS First 3 to 5 threads are chamfered for intermediate use when tapping to the bottom of the hole is not required. BOTTOMING TAPS First 1-1/2 threads are chamfered for use after initial threads have been started and tapping all the way to the bottom of the hole is required. In blind holes tapped by hand to the very bottom, all three taps (i.e. taper, plug and bottoming) should be used in the order named. HI-CARBON STEEL TAPS (PLUG) METRIC Tap Drill Number of Flutes M3-.50 40 3 5.3.50 M3-.0 3/32 3 5.3.0 M4-.70 1/8 4 5.4.70 M4-.75 1/8 4 5.4.75 M5-.80 11/4 4 5.5.80 M5-.90 20 4 5.5.90 M-1.00 13/4 4 5..1 M7-1.00 15/4 4 5.7.1 M8-1.00 F 4 5.8.1 M8-1.25 17/4 4 5.8.1.25 M9-1.00 5/1 4 5.9.1 M9-1.25 5/1 4 5.9.1.25 M10-1.00* 23/4 4 5.10.1 TAPS METRIC CARBON STEEL M10-1.25 S 4 5.10.1.25 All popular sizes offered for foreign car, motorcycle and machinery threading needs Made of tough carbon steel to exacting specifications Offered in plug style only and permanently marked with drill size to use. *Spark Plug s Tap Drill Number of Flutes M10-1.50 11/32 4 5.10.150 M11-1.50 3/8 4 5.11.1.50 M12-1.25 27/4 4 5.12.1.25 M12-1.50 13/32 4 5.12.1.50 M12-1.75 27/4 4 5.12.1.75 M14-1.25* 33/4 4 5.14.1.25 M14-1.50 1/2 4 5.14.1.50 M14-2.00 15/32 4 5.14.2.00 M1-1.50 37/4 4 5.1.1.50 M1-2.00 35/4 4 5.1.2.00 M18-1.50 21/32 4 5.18.1.50 M18-2.00 5/8 4 5.18.2.00 M18-2.50 39/4 4 5.18.2.50-2-
Taps & Dies 2 DIES HEX HEX DIES 4-40 1.23.440-32 1.23.32 8-32 1.23.832 10-24 1.23.1024 10-32 1.23.1032 12-24 1.23.1224 1/4-20 1.23.1420 1/4-28 1.23.1428 1/8-27 (NPT) 1.23.1827 1/4-18 (NPT) 1.23.1418 5/1-18 1.23.5118 3/8-1 1.23.381 3/8-24 1.23.3824 7/1-14 1.23.7114 7/1-20 1.23.7120 1/2-13 1.23.1213 1/2-20 1.23.1220 9/1-12 1.23.9112 9/1-18 1.23.9118 5/8-11 1.23.5811 5/8-18 1.23.5818 3/4-10 1.23.3410 5/1-24 1.23.5124 3/4-1 1.23.341 Special Hi-Molybdenum tool steel For threading rods, bolts, studs Hex configuration allows both wrench & die stock to be used HI-CARBON STEEL HEX DIES 10-24 1.230.1024 10-32 1.230.1032 1/8-27 (NPT) 1.230.1827 1/4-18 (NPT) 1.230.1418 1/4-20 1.230.1420 1/4-28 1.230.1428 5/1-18 1.230.5118 5/1-24 1.230.5124 3/8-1 1.230.381 3/8-24 1.230.3824 7/1-14 1.230.7114 1/2-13 1.230.1213 1/2-20 1.230.1220 9/1-12 1.230.9112 9/1-18 1.230.9118 5/8-11 1.230.5811 5/8-18 1.230.5818 3/4-10 1.230.3410 3/4-1 1.230.341 7/8-9 1.230.789 7/8-14 1.230.7814 1-8 1.230.18 7/1-20 1.230.7120 1-12 1.230.112 Made of high quality carbon tool steel Right hand thread Dies are clearly marked with size on the reverse of the starting side HEX DIES METRIC 3.0 x.50 1.023.30 3.5 x.0 1.023.35 4.0 x.70 1.023.40 5.0 x.80 1.023.50.0 x 1.0 1.023.0 8.0 x 1.25 1.023.80 10.0 x 1.50 1.023.10 12.0 x 1.75 1.023.12 14.0 x 1.50 1.023.14 TAPS PIPE TAPS & DIES PIPE TAPS 1/8-27 1.25.18 1/4-18 1.25.14 3/8-18 1.25.38 1/2-14 1.25.12 3/4-14 1.25.34 1-11-1/2 1.25.1 1-1/4-11-1/2 1.25.114 1-1/2-11-1/2 1.25.112 2-11-1/2 1.25.2 NPT threads High-speed Moly/ Tungsten steel Gold finish PIPE TAPS CARBON STEEL 1/8-27 1.50.18 1/4-18 1.50.14 3/8-18 1.50.38 1/2-14 1.50.12 3/4-14 1.50.34 1-11-1/2 1.50.1 1-1/4-11-1/2 1.50.114 1-1/2-11-1/2 1.50.112 NPT Threads High Quality Carbon Steel Manufactured in USA PIPE TAPS HIGH SPEED STEEL 1/1-27 1.39.11 1/8-27 1.39.118 1/4-18 1.39.14 3/8-18 1.39.38 1/2-14 1.39.12 3/4-14 1.39.34 1 1.39.1 1-1/4-11-1/2 1.39.114 1-1/2-11-1/2 1.39.112 NPT Threads High Speed Steel Manufactured in USA Drill s for Pipe Taps Taper Pipe NPT + NPTF Drill Decimal Equivalent 1/8-27 R.3390 1/4-18 7/1.4375 3/8-18 32/4.5781 1/2-14 45/4.7031 3/4-14 59/4.9219 1-11-1/2 1-5/32 1.152 1-1/4-11-1/2 1-1/2 1.5000 1-1/2-11-1/2 1-47/4 1.7344 2-11-1/2 2-7/32 2.2188 ADJUSTABLE PIPE DIES 1/8-27.01.18 1/4-18.01.14 3/8-18.01.38 1/2-14.01.12 NPT Threads High Quality Carbon Steel -2-7
2 Taps & Dies DIES ROUND ADJUSTABLE ROUND ADJUSTABLE DIES INCH Cutting O.D. 4-40 13/1.1.440 4-48 13/1.1.448 10-24 1.1.1024 10-32 1.1.1032 1/4-20 1.1.1420 1/4-28 1.1.1428 5/1-18 1.1.5118 5/1-24 1.1.5124 3/8-1 1.1.381 3/8-24 1.1.3824 7/1-14 1.1.7114 7/1-20 1.1.7120 1/2-13 1.1.1213 1/2-20 1.1.1220 1/4-28 1-1/2.15.1428 5/1-18 1-1/2.15.5118 5/1-24 1-1/2.15.5124 Cutting O.D. 3/8-1 1-1/2.15.381 3/8-24 1-1/2.15.3824 1/2-13 1-1/2.15.1213 1/2-20 1-1/2.15.1220 9/1-12 1-1/2.15.9112 9/1-18 1-1/2.15.9118 5/8-11 1-1/2.15.5811 5/8-18 1-1/2.15.5818 3/4-10 2.2.3410 3/4-1 2.2.341 7/8-9 2.2.789 7/8-14 2.2.7814 1-8 2.2.18 1-1/8-7 3.3.1187 1-1/8-12 3.3.11812 1-1/4-12 3.3.11412 1-3/8-12 3.3.13812 High Quality Carbon Steel Inch s ROUND ADJUSTABLE DIES METRIC Cutting O.D. M4.5 x.75 13/1.1.45 M5 x.8 13/1.1.5 M8 x 1.25 13/1.1.8 M10 x 1.50 13/1.1.10 M12 x 1.75 13/1.1.12 M14 x 2.0 1.1.14 M1 x 2.0 1.1.1 High Speed Steel Metric s HIGH SPEED STEEL Round Adjustable Dies Metric Cutting O.D. M7 x 1.00 1.10.7.0 M10 x 1.00 1.10.10 M10 x 1.25 1.10.010 M12 x 1.25 1-1/2.10.125 M12 x 1.50 1-1/2.10.012 M14 x 1.50 1-1/2.10.014 M18 x 1.50 1-1/2.10.18 M20 x 1.50 1-1/2.10.20 Special fine and extra-fine thread pitches -2-8
Taps & Dies 2 DIES ROUND ADJUSTABLE (continued) DIE STOCKS Round Die 1 1.024.50 1-1/2 1.024.55 2 1.024.0 2-1/2 1.024.5 3 1.024.70 High Quality 3 Screw Type For Round Dies PREMIUM DIE STOCK 1.24.50 Professional Quality 3-Jaw Self Centering Guide For 1 Round or Hex Dies HSS DIE/HANDLE INCH SIZES -32.9.32 8-32.9.832 10-32.9.1032 12-24.9.1224 1/4-20.9.1420 1/4-28.9.1428 5/1-18.9.5118 5/1-24.9.5124 3/8-24.9.3824 7/1-14.9.7114 7/1-20.9.7120 1/2-13.9.1213 1/2-20.9.1220 METRIC SIZES MX1.0.9. M8X1.25.9.8 M10X1.5.9.10 M12X1.75.9.12 SETS s included 1/4-28, 5/1-24, 3/8-24, 7/1-20, 1/2-20 -32, 8-32, 10-24, 10-32, 12-24 M3X.5, M4X.7, M5X.8, MX1.0, M8X1.25, M10X1.5, M12X1.75 Ready to use HSS die/die handle for quick repair and threading Built-in guide assures starting and no cross threading Convenient - one tool does it all! Ergonmically designed handle is comfortable to use.9.52.9.53.9.7 *** Sets include plastic box *** -2-9
2 Taps & Dies Your Single Source Supplier -2-10
Saw Blades & s 3 SAWS BAND SAW BLADES BAND SAW BLADE Width TPI 5 4-1/2 1/2 10-14 0.5451014 7 9 1/2 10-14 0.791014 7 9 3/4 10-14 0.79.341014 Bi-Metal Construction Cobalt Matrix II Type Alloy Cutting Edge Precision Milled Teeth Guaranteed Weld SAWS PORTABLE BAND SAW BLADES PORTABAND BLADES TPI 10/14 0.51014 14/18 0.51418 44-7/8 x 1/2 x.020 Premium Bi-Metal Blade with Matrix II cutting edge Variable pitch teeth reduce vibration Long lasting and fast cutting Cuts pipe, tubing, and solids made of any machinable metal Sold by the individual blade LENOX TPI Box of 3 Blades Box of 9 Blades Bulk Pack 30 Blades 10/14 0.5510 0.55100.1 0.5510.1 14/18 0.5514 0.55140.1 0.5514.1 18 0.5518 0.55180.1 0.5518.1 24 0.5524 0.55240.1 0.5524.1 Bi-Metal Construction Cobalt Matrix II Type Alloy Cutting Edge Precision Milled Teeth a RC--8 Tooth Hardness Guaranteed Weld All blades are 44-7/8 x 1/2 x.020 Three blades per box SAWS FOLDING JAB/UTILITY LENOX Blade Applications Plaster, Drywall and Medium Metals 0.3050 Folding Jab/Utility Saw has an ergonomic comfort grip handle and comes with (2) blades. Blades included are: 10/14 Vari-Tooth for use on: Plastic Nail embedded wood Medium metals Non-Ferrous TPI for use on: Plaster and Drywall You can also use any length or shorter blade with this handle SAWS JIG SAW BLADES LENOX TPI L x W x T (Inches) Applications Universal Shank Bosch Shank 4 x 3/8 x.050 wood, fast/rough cut 0.2525 0.2570 10 4 x 3/8 x.050 wood, nail embedded 0.2530 0.2575 10 4 x 5/1 x.050 *wood, very smooth clean cut 0.2535 0.2578 10 4 x 5/1 x.050 chip-free down cutting in formica, laminate and plastic 0.2580 Universal Shank Styles 20 3-5/8 x 3/1 x.050 *fine contour cutting in wood, veneer, laminate and plastic 0.2552 0.2592 24 3 x 3/8.037 thin metal, plastics, polys, paneling 0.2555 0.200 Medium Carbide Grit 3 x 5/1 x.032 ** ceramic tile, fiberglass, plastics, cast iron, marble, brick 0.255 0.210 Bi-Metal construction these blades are made by electron beam welding a flexible spring steel back to a Cobalt Alloy cutting edge. Virtually shatter proof Two shank styles available Universal and Bosch Three tooth styles available: Milled: For general purpose sawing and rough-in work with aggressive cutting action Ground: For cleaner, smoother cut finishes. Great for precision work Carbide Grit: Features tungsten carbide continuous edge grit particles bound to an alloy spring steel tempered backing. Great for cutting composites, fiberglass, cast iron, plastics, marble, ceramic tile and brick * Ground Tooth Blade ** Carbide Grit Blade All other blades are milled tooth blades Bosch -3-1
3 Saw Blades & s SAWS JIG SAW BLADES (continued) ALFA Shank TPI L x W x T (Inches) Applications 10 3-5/8 x 3/8 x.035 wood, plywood, hard board 0.03.35810 14 2-3/4 x 5/1 x.035 ALFA non-ferrous metals, fiberglass, hard rubber, nail-embedded wood 0.03.23414 18 2-3/4 x 5/1 x.035 metal 18 gauge & under 0.03.23418 24 2-3/4 x 5/1 x.035 metals & non-ferrous metal up to 1/8 0.03.23424 TPI L x W x T (Inches) Applications 14 3 x 5/1 x.035 Metals over 1/8, plastics, fiberboard 0.04.314 18 3 x 5/1 x.035 Metals over 18 gauge, tubing, conduit 0.04.318 24 3 x 5/1 x.035 Thin metals, plastic, fine cuts under 18 gauge 0.04.324 10 4 x 5/1 x.050 Smooth wood cuts, plastics 0.04.410 8 4 x 5/1 x.050 Wood, fiberglass 0.04.408 4 x 5/1 x.050 Fast wood cuts 0.04.40 Universal Shank Bosch Bi-Metal Construction Super hard Cobalt Matrix with flexible alloy back Tooth hardness of RC-5-7 enables a sharp long lasting cutting edge Shatter proof Handles the toughest cutting jobs SAWS RECIPROCATING BLADES RECIPROCATING BLADES TPI Decription Applications 18 3x5/1x.035 0.1000 14 4x3/4x.035 0.1001 18 4x3/4x.035 0.1002 24 4x3/4x.035 0.1003 14 x3/4x.035 0.1004 18 x3/4x.035 Machinable Metals up to a 1/4 0.1005 24 x3/4x.035 0.100 14 8x3/4x.035 0.1007 18 8x3/4x.035 0.1008 14 9x3/4x.035 0.1009 18 12x3/4x.035 0.1010 10 x3/4x.035 0.1011 Wood, Plastic, Ferrous 10/14 x3/4x.035 0.1012 & Non Ferrous Metals 10/14 8x3/4x.050 0.1013 9x7/8x.02 0.1014 10 9x7/8x.02 Rough-in cutting all types of wood, wood 0.1015 12x7/8x.02 composites, and nail embedded wood 0.101 10 12x7/8x.02 0.1017 14 x1x.042 0.1018 18 x1x.042 0.1019 14 9x1x.042 Machinable Metals, Wood, 0.1020 18 9x1x.042 Wood Composites, Plastic or Rubber 0.1021 14 12x1x.042 0.1022 18 12x1x.042 0.1023 10 x7/8x.02 0.1024 14 x7/8x.02 0.1025 10 9x7/8x.02 All Types of machinable metal encountered 0.102 14 9x7/8x.02 in vehicle extraction and demolition 0.1027 10 12x7/8x.02 0.1028 14 12x7/8x.02 0.1029 x3/4x.035 0.1030 x3/4x.050 0.1031 Wood, Wood Composites, 5/8 x3/4x.050 0.1032 and Nail-embedded wood 9x3/4x.035 0.1033 12x3/4x.050 0.1034 Straight tooth pitch gives a smooth cutting action Bi-metal construction for long cutting life and heat and wear resistant Shop Pro Bi-metal blades reduce breakage and last longer than conventional carbon and all high speed steel blades MADE IN THE USA -3-2
Saw Blades & s 3 SAWS RECIPROCATING BLADES (continued) ALFA TPI TPI 18 Tungsten Carbide Grit L x W x T (Inches) Applications Applications Heavy-duty for all woods & nail embedded woods Heavy-gauge metals 18 gauge to 1/8 thick, conduit pipe, channels, and tubing Cutting fiberglass, plaster, ceramics, laminates, marble, and hardened steel 14 4 x 3/4 x.035 Metal over 1/8 thick, barstock & angles 0.02.45814 18 4 x 3/4 x.035 Metal over 18 gauge, conduit, pipe, tubing 0.02.45818 24 4 x 3/4 x.035 Metal 18 gauge & under, galvanized pipe 0.02.45824 10 x 3/4 x.035 Wood, nail embedded wood, compositions, plastics, cast aluminum & 0.02.5810 non-ferrous metals 14 x 3/4 x.035 Metal over 1/8 thick, barstock & angles 0.02.5814 18 x 3/4 x.035 Metal over 18 gauge to 1/8 thick conduit, 0.02.5818 pipe, channels & tubing 24 x 3/4 x.035 Metal 18 gauge & under, galvanized pipe 0.02.5824 100 Blade Bulk Pack 10 8 x 3/4 x.035 Wood, nail embedded wood, composition materials, plastic, cast aluminum & 0.02.83410 0.02.83410.1 light metals 14 8 x 3/4 x.035 Large diameter pipe 0.02.93414 0.02.93414.1 x 3/4 x.050 Heavy duty for all woods & nail embedded woods 0.02.34 9 x 3/4 x.050 Heavy duty for all woods & nail embedded woods 0.02.934 12 x 3/4 x.050 Heavy duty for all woods & nail embedded woods 0.02.1234 x 3/4 x.035 TPI Blade Plastic with metal lath, sheet rock, plasterboard, plaster walls. Tooth design cuts both forward & on back stroke MORSE BI-METAL SAWZALL BLADE Applications 0.02.341 /8 Nail embedded wood, general roughing-in 0.3031 MORSE BI-METAL RECIPROCATING BLADES FIRE & RESCUE RECIPROCATING BLADES Qty per L x W x T Pkg x 3/4 x.035 5 0.310 9 x 3/4 x.035 5 0.3190 4 x 3/4 x.035 5 0.31418 x 3/4 x.035 5 0.3118 8 x 3/4 x.035 5 0.31818 4 x 3/4 x.04 1 0.02.584 x 3/4 x.042 1 0.3100 8 x 3/4 x.042 1 0.31800 TPI L x W x T (Inches) 10 x 7/8 x.02 0.3100 10 9 x 7/8 x.02 0.3101 10 12 x 7/8 x.02 0.3102 14 x 7/8 x.02 0.3103 14 9 x 7/8 x.02 0.3104 14 12 x 7/8 x.02 0.3105 Bi-Metal Construction Matrix HSS cutting edge with flexible alloy back resist tooth strippage Tooth hardness of RC--7 enables a sharp long lasting cutting edge Shatter proof Handles the toughest cutting jobs Very fast cutting, nail emedded wood, general roughing-in Professional quality, Bi-Metal Construction Shock resistant Matrix II cutting edge resists tooth strippage For use on all types of machinable metal, wood, nail imbedded wood, composites, rubber, plastics, etc. Morse Heavy-Duty Bi-Metal Construction Extra wide, extra thick for heavy feed and stability Preferred by professional firefighters For all types of machinable metal encountered in vehicle extraction and demolition Superior performance in sheet metal and vehicle frames LENOX TPI L x W x T Lenox# Applications X3/4X.050 5GR 0..1 9X3/4X.050 95GR Rough work in wood 0..2 12X3/4X.050 15GR 0..3 10 X3/4X.035 10GR 0..4 Wood, Plastic and Heavy gauge metal 10 8X3/4X.050 810GR 0..5 14 4X3/4X.035 414GR 0.. Heavy gauge metal and Medium gauge metal 14 X3/4X.035 14GR 0..7 18 4X3/4X.035 418GR 0..8 18 X3/4X.035 18GR Medium gauge metals and thin metals 0..9 18 8X3/4X.050 818GR 0..10 24 4X3/4X.035 424GR 0..11 24 X3/4X.035 24GR 0..12 X1X.02 0GR 0..13 Demolition work in wood and metal 9X1X.02 9GR 0..14 10 9X1X.02 90GR Fire and rescue and demolition work 0..15 14 X1X.042 114GR 0..1 14 9X1X.042 9114GR Thick gauge metals and medium gauge metals 0..17 14 12X1X.042 2114GR 0..18 18 X1X.042 118GR Medium gauge metals 0..19 T2 technology and precision applied titanium coating help dissipate heat making blades last longer Titanium coating makes teeth more wear resistant so they stay sharp for quicker cuts T2 technology s patented tooth design delivers longer blade life and enables faster cutting in the widest array of cutting applications -3-3
3 Saw Blades & s SAWS RECIPROCATING BLADES (continued) LENOX TPI 10 10 10 14 18 18 L x W x T (Inches) x 3/4 x.050 12 x 3/4 x.050 12 x 3/4 x.050 x 3/4 x.035 x 3/4 x.035 8 x 3/4 x.050 4 x 3/4 x.035 4 x 3/4 x.035 3 x 1/4 x.032 Lenox 5R 15R 110R 0R 10R 810R 414R 418R 318RC 14 x 3/4 x.035 14R 18 18 x 3/4 x.035 8 x 3/4 x.035 18R 818R 24 x 3/4 x.035 24R x 3/4 x.050 3RP medium carbide grit 10/14 10/14 14 10 14 18 14 8 x 3/4 x.042 800RG 8x3/4x.050 x 3/4 x.050 8 x 3/4 x.035 x 7/8 x.02 9 x 7/8 x.02 9 x 7/8 x.02 x 1 x.042 x 1 x.042 9 x 1 x.042 850R 50R 814R 0R 90R 9R 114R 118R 9114R Applications *rough work in wood *wood, compositions, plastic, cast aluminum and non-ferrous metals wood, compositions, plastics, cast aluminum and non-ferrous metals contour (scroll) cut heavy gauge metal, rubber and fiber heavy gauge metal, conduit and tubing metal and galvanized pipe 18 gauge and under 0.3005 0.300 0.3007 0.3011 0.3010 0.3015 0.301 0.3017 0.3027 0.3020 0.3025 0.302 0.3030 plaster board 0.3035 (wood in pocket saw) hard to cut abrasive materials, fiberglass, ceramic tiles, cast iron pipe, 0.3040 marble and brick Heavy duty for cutting pipe, 0.3041 structural steel and 0.3051** stainless steel. 0.21519 Fire and rescue. Demolition work in wood and metal. Fire and rescue. Heavy duty design for cutting steel rod and black pipe 0.3055** 0.305** 0.3057** 0.302 0.303 0.308 Bi-Metal Construction Cobalt Matrix II Type Alloy Cutting Edge Precision Milled Teeth RC -8 Tooth Hardness Carbide grit blade features tungsten carbide continuous edge particles (RA 90-93) bound to an alloy spring steel back All reciprocating saw blades come with a 1/2 tang * includes nail-embedded wood ** Demolition Blades AIR HACK SAW BLADES (PREMIUM) Teeth per Inch Package 0.01.8811 3-9/1 24 5 Blades in Plastic Pouch 0.01.8811 3-9/1 32 5 Blades in Plastic Pouch 0.01.8812 Bi-Metal Construction Designed for pneumatic machines (Chicago-Pneumatic) SAWS AIR HACK SAW BLADES LENOX AIR HACK SAW BLADES (PREMIUM) Teeth per Inch Package 0.01.8810 4 18 5 Blades in Plastic Pouch 0.01.8810 4 24 5 Blades in Plastic Pouch 0.01.8809 5/32 hole in shank Bi-Metal construction Designed for air saws ALFA AIR HACK SAW BLADES (HIGH QUALITY) Teeth per Inch Package 3 32 1 Blade 0.01.880 4 18 1 Blade 0.01.8808 4 32 1 Blade 0.01.8807 5/32 hole in shank Bi-Metal construction Designed for air saws SAWS HACK SAW BLADES HACK SAW BLADES TPI Single Blade 10 Blade Pack 18 0.12018 0.12018.1 0.12018.50 24 0.12024 0.12024.1 0.12024.50 50 Blade Pack 32 0.12032 0.12032.1 0.12032.50 Ultra Bi hard cobalt high speed steel construction Flexible body resists shattering for safety Raker set teeth avoids pinching, gives more chip clearance and ensures a large cutting width for smooth cutting action Addition of cobalt gives hardness and heat resistance to the teeth to retain their cutting edge even where temperatures can reach 1100 F Suitable for materials including Alloy and stainles steel 12 L x 1/2 W x.025 T CARBIDE GRIT HACK SAW BLADES 0.12. Carbide particles permanently bonded to alloy steel to form a superior cutting tool No teeth to dull or strip Outlasts conventional blades Works in many composite materials where conventional blades fail Fits standard 12 hand hack saw frame Cuts on both the forward & back strokes Great for cutting hydraulic hose & wire rope -3-4
Saw Blades & s 3 SAWS HACK SAW BLADES (continued) CARBIDE GRIT ROD SAW 0.12.3 Fits standard 12 hand hack saw frame Great for cutting contours Exellent for cutting glass, wire rope & ceramic tile TRIPLE TOOTH HACKSAW BLADE 0.1201 Bi-metal construction 3 teeth sizes on one blade: 32-24-18 TPI For quick starts and fast, smooth cutting 12 L x 1/2 W x.025 T Bulk pack of 10 blades available ( 0.1201.1 ) GENERAL PURPOSE HACK SAW BLADES TPI 18 0.11018 24 0.11024 32 0.11032 Single Blade Ultra Bi hard cobalt high speed steel construction Flexible body resists shattering for safety Raker set teeth avoids pinching, gives more chip clearance and ensures a large cutting width for smooth cutting action Addition of cobalt gives hardness and heat resistance to the teeth to retain their cutting edge even where temperatures can reach 1100 F Suitable for materials including Alloy and stainles steel 12 L x 1/2 W x.025 T HACK SAW BLADE 12 24TPI 748.43.021 10PK Milwaukee super-tough Bi-metal hack saw blades Outlast conventional blades up to 3 times, which requires fewer blade changes Ideal for cutting angle iron, pipe, brass, and small section steel Bi-metal for greater durability for cutting common materials 1/8-3/8 thick, Fits most 12 hack saw frames LENOX LIGHTWEIGHT HACKSAW FRAME 0.12001 Heavy-duty aluminum handle hacksaw frame Lightweight, all metal construction Comes with one hacksaw blade LENOX PVC/ABS PLASTIC PIPE HAND SAW Description SAWS HACK SAW FRAME 12 PVC/ABS Plastic Hand Saw Assy 0.1250 18 PVC/ABS Plastic Hand Saw Assy 0.1251 12 PVC/ABS Replacment Blade 0.1252 Hand saw assembly comes complete with a heavy-duty, lightweight aluminum handle and carbon steel blade Handle features a comfortable grip and a large opening for maximum clearance Wide carbon steel blade will cut through any diameter plastic pipe, wood, and nail-embedded wood SAWS HOLE SAWS LENOX HIGH TENSION HACKSAW FRAME 0.1200 A high quality frame that lets you get the most out of your blades Tensions blade to 28,000 PSI for faster and straighter cuts, without blade twisting Heavy-duty aluminum handle with steel crossbar Hardened blade holding pins permanently inserted into the frame Has flush cut, jag saw and compass saw capabilities Extra blades can be stored in crossbar Comes with one hacksaw blade LENOX Use with Inches mm Arbor No. 9/1 14 1L, 4L, 5L 0.4005 5/8 1 1L, 4L, 5L 0.4010 11/1 17 1L, 4L, 5L 0.4015 3/4 19 1L, 4L, 5L 0.4020 20 1L, 4L, 5L 0.4025 13/1 21 1L, 4L, 5L 0.4030 7/8 22 1L, 4L, 5L 0.4035 15/1 24 1L, 4L, 5L 0.4040 1 25 1L, 4L, 5L 0.4045 1-1/1 27 1L, 4L, 5L 0.4050 1-1/8 29 1L, 4L, 5L 0.4055 1-3/1 30 1L, 4L, 5L 0.400 1-1/4 32 2L or L 0.405 1-5/1 33 2L or L 0.4070 1-3/8 35 2L or L 0.4075 1-7/1 37 2L or L 0.4080 1-1/2 38 2L or L 0.4085 1-9/1 40 2L or L 0.4090 1-5/8 41 2L or L 0.4095 1-11/1 43 2L or L 0.4100 1-3/4 44 2L or L 0.4105 1-13/1 4 2L or L 0.4110 1-7/8 48 2L or L 0.4115 2 51 2L or L 0.4120 Use with MORSE Inches mm Arbor No. 2-1/1 52 2L or L 0.4125 2-1/8 54 2L or L 0.4130 2-1/4 57 2L or L 0.4135 2-3/8 0 2L or L 0.4140 2-1/2 4 2L or L 0.4145 2-9/1 5 2L or L 0.4150 2-5/8 7 2L or L 0.4155 2-3/4 70 2L or L 0.410 2-7/8 73 2L or L 0.415 3 7 2L or L 0.4170 3-1/8 79 2L or L 0.4175 3-1/4 83 2L or L 0.4180 3-3/8 8 2L or L 0.4185 3-1/2 90 2L or L 0.4190 3-5/8 92 2L or L 0.4195 3-3/4 95 2L or L 0.4200 4 102 2L or L 0.4205 4-1/8 105 2L or L 0.4210 4-1/4 108 2L or L 0.4215 4-1/2 115 2L or L 0.4220 4-3/4 121 2L or L 0.4225 5 127 2L or L 0.4230 5-1/2 140 2L or L 0.4235 152 2L or L 0.4240 Bi-Metal Construction Hi-speed steel cutting edge (RC-3-5) resists tooth strippage and stays sharp longer 4/ variable tooth pitch for faster smoother cuts with less noise and better chip clearance Positive rake teeth for aggressive cutting action Thick, Heavy-Duty Backing Plates Full 1-1/2 Cutting Depth -3-5
3 Saw Blades & s SAWS HOLE SAWS (continued) MK MORSE mete Inches mm 9/1" 14 0.01.91 5/8" 1 0.01.58 11/1" 17 0.01.11 3/4" 19 0.01.34 13/1" 21 0.01.31 7/8" 22 0.01.78 15/1" 24 0.01.151 1" 25 0.01.1 1-1/1" 27 0.01.111 1-1/8" 29 0.01.118 1-3/1" 30 0.01.131 1-1/4" 32 0.01.114 1-5/1" 33 0.01.51 1-3/8" 35 0.01.138 1-7/1" 37 0.01.171 1-1/2" 38 0.01.112 1-9/1" 40 0.01.191 mete Inches mm 1-11/1" 43 0.01.1111 1-3/4" 44 0.01.134 1-13/1" 4 0.01.1131 1-7/8" 48 0.01.178 2 51 0.01.2 2-1/1" 52 0.01.211 2-1/8" 54 0.01.218 2-1/4" 57 0.01.214 2-5/1" 59 0.01.251 2-3/8" 0 0.01.238 2-1/2" 4 0.01.213 2-9/1" 5 0.01.291 2-5/8" 7 0.01.258 2-3/4" 70 0.01.234 2-7/8" 73 0.01.278 3" 7 0.01.3 3-1/8" 79 0.01.318 mete Inches mm 3-3/8" 8 0.01.338 3-1/2" 89 0.01.312 3-5/8" 92 0.01.358 3-3/4" 95 0.01.334 3-7/8" 98 0.01.378 4" 102 0.01.4 4-1/8" 105 0.01.418 4-1/4" 108 0.01.414 4-3/8" 111 0.01.438 4-1/2" 114 0.01.412 4-3/4" 121 0.01.434 5" 127 0.01.5 5-1/4" 133 0.01.514 5-1/2" 140 0.01.512 5-3/4" 14 0.01.534 1-5/8" 41 0.01.158 3-1/4" 83 0.01.314 " 152 0.01. PATENT PENDING TOOTH SET DESIGN - Optimized to Remove Material Faster NEW CAP - Reduces Runout and Vibration PREMIUM M42 HIGH SPEED STEEL CUTTING EDGE, 8% COBALT - Over 2X the Life of Our AV Model CUTTING DEPTH - 1-15/1 (49,2 mm) HEAVY DUTY.050 SIDE WALL - For Greater Stability NEW SIDE SLOT - Increased Leverage for Faster, Easier Slug Removal NEW EXTERIOR RED COATING - Reduces Side Wall Friction for Efficient Cutting MADE IN USA MK MORSE ARBORS Model No. Previous Model No. Shank Thread Fits Saws PILOT DRILL MA24 M24K, M24 1/4" 1/2 20 9/1" - 1-3/1" 0.01.7 0.01.12 MA34 M34, M44, M44K 3/8" 1/2 20 9/1" - 1-3/1" 0.01.8 0.01.12 MA35 NEW 3/8" 5/8 18 1-1/4" - " 0.01.9 0.01.12 MA35PS M35PS 3/8"QC 5/8 18 1-1/4" - " 0.01.10 0.01.12 MA45PS M4K,M45,M45P, M4PS,M55P 7/1" QC 5/8 18 1-1/4" - " 0.01.11 0.01.12 SAWS HOLE SAW KITS MK MORSE 11 pc Maintenance Kit 0.01.132 One each holes saws: Contains (1 each): 3/4, 7/8, 1-1/8, 1-3/8, 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2 Includes arbors MA34 & MA45PS MK MORSE 8 pc Electrician Kit 0.01.008 One each holes saws: 7/8, 1-1/8,1-3/8, 1-3/4, 2, 2-1/2 Includes arbors MA34 & MA45PS -3-
fi fi CUTTING TOOLS Saw Blades & s 3 SAWS HOLE SAW KITS (continued) MK MORSE 7 pc Mechanic Kit 0.01.07 One each holes saws: 7/8, 1, 1-1/8, 1-1/4, 1-1/2, Arbor(1) MA34, Adaptor Nut (1) RM44N MK MORSE 8 pc Plumber Kit 0.01.08 One each holes saws: 3/4, 7/8, 1-1/8, 1-1/2, 1-3/4, 2-1/4 Includes arbors MA34 & MA45PS REAL MCCOY HOLE SAW ACCESSORIES 12 EXTENSION LENOX Complete Kit 0.4330 Twelve s-general Purpose One each holes saws: 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-3/4, 2, 2-1/2, 3, (1, 19, 22, 25, 29, 32, 35, 38, 44, 51, 4, 7mm). Also includes 2 arbor (1L, 2L), 3 spare pilot drills and plastic case. 0.10.121 PILOT DRILL 0.10.31 SAWS HOLE SAW ARBORS SNAP-BACK ARBORS IND No. Fits hole Saw Shank type Chuck 2L 1-1/4 - " Solid Hex 1/2 & Larger 0.42 5L 9/1-1-3/1" Solid Hex 3/8 & Larger 0.427 L 1-1/4 - " Solid Hex 3/8 & Larger 0.428 Quick Change Prevents threads from stripping No tools needed Arbors LENOX IND No. Fits Hole Saws Shank Type Chuck Inches mm 1L 9/1 1-3/ Hex 1/2 13 0.4245 2L 1-1/4 Hex 1/2 13 0.4250 4L 9/1 1-3/1 Round 1/4 0.4255 5L 9/1 1-3/1 Hex 3/8 10 0.420 L 1-1/4 Hex 3/8 10 0.425 1L 2L 4L 5L L -3-7
3 Saw Blades & s SAWS HOLE SAW ARBORS (continued) MORSE Description Shank Thread Fits Hole Saws Pilot Drill Chuck Replacement Pilot Drill Type A 1/4 Round 1/2-20 5/8-1-1/2 HSS 1/4 1/4 0.05.0114 0.4275 Type B 7/1 Hex 5/8-18 1-1/4 - HSS 1/4 1/2 0.4270 Heavy-Duty carbon steel arbors come complete with pilot drills. Adapt to any power drill used by professionals ACCESSORIES Description Chuck Fits Arbor Inches mm Number A Pilot Drill 1/4 x 4 1/4 1L, 2L, 4L 0.4270 B Pilot Drill 1/4 x 3 1/4 5L, L 0.4275 C Arbor Adapter 1L, 4L, 5L 0.4280 E 12 /300mm Extension 1/2 13 1L, 2L 0.4290 F 10 /250mm Extension 3/8 10 5L, L 0.4295 G 5-1/2 /140mm Extension 1/2 13 1L, 2L 0.4300 A B C D E F G SAWS CIRCULAR SAW BLADES CIRCULAR SAW BLADES CARBIDE TIPPED Blade No. of Arbor Kerf Teeth RPM 7-1/4 Combination 24 5/8.082 9000 0.551 7-1/4 Cross-Cut 40 5/8.082 9000 0.552 Use for sawing woods, non-ferrous metals, and rough materials such as compositions, flooring, and roofing Cuts smooth and fast Lasts up to 50 times longer than steel blades STEELMAX INDUSTRIAL METAL CUTTING SAW BLADES Description RPM Arbor 7-1/4 Mild Steel Blade 3T 3500 20mm 0.7143 7-1/4 Thin Steel Blade 8T 3500 20mm 0.7148 7-1/4 Stainless Steel Blade 48T 3500 20mm 0.71448 7-1/4 Aluminum Blade 54T 3500 20mm 0.754 9 Mild Steel Blade 48T 2700 1.0 0.948 9 Stainless Steel Blade 80T 2700 1.0 0.980 9 Thin Steel Blade 80T 2700 1.0 0.9801 9 Aluminum Blade 80T 2700 1.0 0.9802 14 Mild Steel Blade T 1450 1.0 0.14 14 Stainless Steel Blade 90T 1450 1.0 0.1490 14 Thin Steel Blade 90T 1450 1.0 0.1491 14 Aluminum Blade 100T 1450 1.0 0.14100 Increase Productivity- saves time and money. Less than secsonds to cleanly cut 4 x 5/1 mild steel. Cuts a Variety of Metals, Plastic and Wood - These blades are used when cutting mild steel, stainless steel and aluminum and cuts them as easy as it cuts plywood. Cool -to-the-touch - No waiting for your workpiece to cool down. Just cut it and handle it. Precise Cutting - No milling or de-burring with near-surgical dry-cut technology. -3-8
Saw Blades & s 3 CUTTING BLAIRCUTTERS 0.055 BLAIRCUTTER KIT (Blair No. 13218) comes in a handy plastic case and contains 1/4, 5/1, 3/8, 7/1, 1/2, 9/1, and 5/8 diameter cutters as well as a (Blair No. 1321) Arbor with Retractable Pilot and three extra Pilots. BLAIRCUTTERS SOLD SEPARATELY Economy and quality. Fast,accurate, burr-free holes for materials up to 3/1 thick in seven sizes for 1/4 and larger drill chucks. Spring loaded pilot pops the slug from the cutter. Blair 1/4 13200* 0.005 5/1 13202* 0.010 3/8 13204* 0.015 7/1 1320* 0.020 1/2 13208* 0.025 9/1 13210* 0.030 5/8 13212* 0.035 Description FOR SHEET METAL (FOR THINNER MATERIALS) Precision ground high speed steel Blaircutters, 1/4 thru 5/8 diameter Precision slug-ejector type alloy steel arbor fits 1/4, 3/8, and 1/2 chucks Screw adjustment of Ejector Pilot tension spring Long wearing replacement pilots Rugged teeth provide longer tool life Cuts holes faster and cleaner than twist drill Requires much lighter equipment with only a fraction of the power and effort needed for twist drilling and cuts without distorting inner panel Much lower cost-per-hole than for twist drills and less fixturing ARBOR AND PILOT FOR BLAIRCUTTERS & SPOTWELD CUTTERS 1/4 Arbor with retractable pilot for Blaircutters and Spotweld s Blair 1321 0.045 Retractable Pilot 13217* 0.050 * Noted Blair Number refers to a 3 piece package while part number refer to a 1 piece package. CUTTING SPOTWELD CUTTERS BLAIR DOUBLE-END SPOTWELD CUTTER ASSEMBLY Description Blair 0.00 Spotweld Assembly 13219 0.00 Double-End 13214* 0.040 Retractable Pilot 13217* 0.050 Adjustable stop rod (Retractable Pilot) lets you set depth of cut precisely, so only the outer panel is cut thru. Arbor w/ Pilot 1321 0.045 The Spotweld Assembly contains one Arbor, one retractable Pilot, and one 3/8 double-end Twice the tool life Unique 3/8 diameter hardened and precision ground cutting tool Makes removing spot welded body panels fast and easy Hollow design cuts around weld, thus hardness does not affect tool sharpness Adjustable depth rod sets the tool so only the outer panel is cut through Leaves the underlying panel undamaged When Double-End s become dull, simply unscrew the cutter from the arbor, and reassemble with the new teeth exposed Arbor can be used in any 1/4, 3/8, or 1/2 chucks * Noted Blair Nos. refer to a 3 pc. package while Winzer Part Nos. refer to a 1 pc. package. 0.040 0.045 0.050-3-9
3 Saw Blades & s CUTTING ROTABROCH ROTABROACH HOLE CUTTERS Description Blair Rotabroach Kit 11090 0.100 Rotabroach Arbor Assy 11122 0.101 Rotabroach Pilot 11121 0.102 Rotabroach 5/1 11104 0.112 Rotabroach 3/8 11108 0.114 Rotabroach 7/1 11112 0.118 Rotabroach 1/2 1111 0.120 Rotabroach 9/1 11120 0.122 Rotabroach 5/8 11124 0.123 Rotabroach 3/4 11132 0.12 For heavy duty use in sheet metal and other materials Cuts clean, burr-free round holes Patented tooth geometry prevents chip clogging when cutting steel, sheet metal, or plastics Arbor fits 3/8 and 1/2 drill chucks Rotabroach Kit includes: 5/1, 3/8, 7/1, 1/2, 9/1 5/8, and 3/4 cutters, Arbor Assembly, extra Pilot, Center Punch, Hex Wrench and Washers SAWS CARBIDE TIP HOLE SAWS CT7 APPLICATIONS: For cutting holes in steel plate, iron, aluminum, copper, cast iron, and stainless steel up to 1 thick. Perfect for drilling holes (5/8 to 2 diameter) in pipe, steel plates, metal studs, electrical appliances, auto and truck body repair and more. Produce overlapping and interrupted holes easily. TIME SAVING FEATURES: Built-in ejector spring and pilot drill provide quick, smooth discharge of metal slug for greater productivity. Less cutter resistance for up to three times longer drilling per battery charge. Three-flatted shank for faster loading and better concentricity Description Description 9/1" CT7 Carbide Tipped Hole Saw 0.25019 5/8 CT7 Carbide Tipped Hole Saw 0.25020 11/1 CT7 Carbide Tipped Hole Saw 0.25021 3/4 CT7 Carbide Tipped Hole Saw 0.25022 13/1 CT7 Carbide Tipped Hole Saw 0.25023 7/8 CT7 Carbide Tipped Hole Saw 0.25024 15/1 CT7 Carbide Tipped Hole Saw 0.25025 1 CT7 Carbide Tipped Hole Saw 0.2502 1-1/1 CT7 Carbide Tipped Hole Saw 0.25027 1-1/8 CT7 Carbide Tipped Hole Saw 0.25028 1-3/1" CT7 Carbide Tipped Hole Saw 0.25049 1-1/4 CT7 Carbide Tipped Hole Saw 0.25029 1-3/8 CT7 Carbide Tipped Hole Saw 0.25030 1-1/2 CT7 Carbide Tipped Hole Saw 0.25031 1-3/4 CT7 Carbide Tipped Hole Saw 0.25032 2 CT7 Carbide Tipped Hole Saw 0.25033 2-1/8 CT7 Carbide Tipped Hole Saw 0.25043 2-1/4 CT7 Carbide Tipped Hole Saw 0.25044 2-3/8" CT7 Carbide Tipped Hole Saw 0.250238 2-1/2 CT7 Carbide Tipped Hole Saw 0.25034 2-5/8" CT7 Carbide Tipped Hole Saw 0.25057 2-3/4" CT7 Carbide Tipped Hole Saw 0.25048 3 CT7 Carbide Tipped Hole Saw 0.25035 3-1/4" CT7 Carbide Tipped Hole Saw 0.25058 3-1/2" CT7 Carbide Tipped Hole Saw 0.2503 3-5/8" CT7 Carbide Tipped Hole Saw 0.25059 4" CT7 Carbide Tipped Hole Saw 0.25037 Replacement Pilot Drill CT7 0.25038 Replacement screw for CT7 0.25039 Replacement spring for CT7 0.25040 0.25038 0.25039 0.25040-3-10
Files 4 TOOLS FILES STANDARD TOOTH CUTS Three standard cuts are available on most American Pattern Files: B = (Bastard Cut) - Coarse teeth for rapid stock removal 2 = (Second Cut) - Medium teeth for moderate stock removal S = (Smooth Cut) - Fine teeth for smooth finishes Tang Heel Body Point fi WAVY TEETH This unique design features tooth spacing, coarse- to fine- to extra fine. This enables the file to remove material faster and smoother without Chattering. Because of this cutting feature the file will last longer than ordinary files. Comes standard on ALL Simonds double cut files (except rounds) at no extra cost. MULTI-KUT Also known as the world s most versatile file. Reduces inventory. Coarse teeth remove metal faster, while the double chip breaker generates a smoother finish. It does the job of several files! SPIRAL HALF ROUND This file features a twist and roll action built in. The half round side leaves a super smooth finish on concave surfaces. The flat side can come with a Multi-Kut for a wide range of applications. Best of all... its easy to use. BLACK MAXI-SHARP Specially treated with a black oxide coating to last LONGER than other files. It lasts longer because it resists loading, rust, and is designed with sharper teeth. Find out why more and more people are discovering the added benefits of Maxi-Sharp files. TOOLS BLACK MAXI-SHARP FILES BLACK MAXI-SHARP Our Premium line of files. These files are specially treated with a black oxide coating to last longer. They last longer because they resist loading, rust, and are designed with a sharper edge on the teeth. FLAT Cut B 2.01.5 S 2.01.10 8 B 2.01.15 8 S 2.01.20 10 B 2.01.25 10 S 2.01.30 12 B 2.01.35 12 S 2.01.40 14 B 2.01.45 Known as the Work Horse because it gets used so often. Used primarily by machinists, in factories or whenever rapid stock removal is desired. This double cut file features the exclusive Simonds Wavy Tooth design. It has cut edges and tapers toward the point for detail work HALF ROUND Cut B 2.01.50 S 2.01.55 8 B 2.01.0 8 S 2.01.5 10 B 2.01.70 10 S 2.01.75 12 B 2.01.80 14 B 2.01.85 Simonds exclusive Spiral design features a built in Twist and Roll action which is ideal for rounding out holes. It removes material rapidly yet leaves a smooth finish. The flat side is double cut and features Simonds exclusive Wavy Tooth design. KNIFE Cut B 2.01.90 8 B 2.01.95 Shaped like a knife blade as the name indicates. Commonly used on slots, keyways and acute angles. This file is double cut and features Simonds exclusive Wavy Tooth design. Sides are double cut but the back is safe (uncut). MULTI-KUT 10 2.01.110 Obtain almost any finish required by simply changing feed pressure. The exclusive Multi-Kut design features two sets of chip breakers which form a diamond pattern. Coarse teeth remove metal faster while the chip breakers leave a smooth finish. This file is very versatile. It also tapers toward the point for detail work. -4-1
4 Files TOOLS BLACK MAXI-SHARP FILES (continued) MULTI-KUT HALF ROUND 10 2.01.120 The same dynamic features on the flat PLUS the Spiral cut on the half-round side. This combination offers rapid stock removal and smooth finishes on either flat or concave surfaces. Two unique features on one file make this a really versatile tool to have. ROUND Cut B 2.01.130 S 2.01.135 8 B 2.01.140 8 S 2.01.145 10 B 2.01.150 12 B 2.01.155 Primarily used to enlarge and round out circular openings or concave surfaces. This file tapers toward the point making it adaptable on numerous size holes. THREE SQUARE Cut B 2.01.10 8 B 2.01.15 Used for angles more acute than 90 for cleaning corners, filing cutters and taps. The triangular shape (each side at 0 angles from one another) enables this file to get into corners the others cannot. Double cut with Simonds exclusive Wavy Tooth design, it tapers toward the point for detail work. MILL Cut B 2.01.170 2 2.01.175 S 2.01.180 8 B 2.01.185 10 B 2.01.205 10 S 2.01.220 12 B 2.01.225 12 S 2.01.230 B - Bastard Cut S - Smooth Cut 2 - Second Cut This is a very adaptable file that can be used for a multitude of applications such as: sharpening various types of saws and tools, draw filing, lathe work and general shop use. Comes with both edges cut or with one or two round edges cut. This single cut file tapers toward the point for detail work. 2 ROUND Made in 8, and 10 EDGES Bastard Cut Only 8, and 10 Mill Files with round edges do no taper in width. TAPERED SAW FILES Triangular in shape and tapered toward the point, these files are designed for filing various types of saws with 0 angle teeth. They have cut edges or corners to maintain saw gullets SLIM Cut SC 2.01.245 EXTRA SLIM Cut SC 2.01.250 DOUBLE EXTRA SLIM ALL-PURPOSE PADDLE HANDLE 10 2.01.270 A multi-purpose tool as the name implies. Very useful for a wide range of filing applications because it has a different cut on each side. On one side, the double cut Bastard is for hogging off material quickly. The other side has a single cut for smoother finishes. One safe (uncut) edge for shoulder filing with a builtin handle, provides maximum versatility. Cut SC 2.01.255 7 SC 2.01.20 SC = SINGLE CUT -4-2
Files 4 TOOLS FILES IMPORT HAND FILES Description Cut Slim Taper B 8 2.03.100 TOOLS FILES SPECIALTY ROUND CHAIN SAW Cut x1/8 SC 2.02.5 8x5/32 SC 2.02.10 8x3/1 SC 2.02.15 8x7x32 SC 2.02.20 8x1/4 SC 2.02.25 8x3/8 SC 2.02.35 Designed for sharpening all sizes of chain saw teeth. This file maintains the proper tooth shape throughout extensive use and leaves a smooth, clean cutting edge. Comes with single cut (SC) teeth. THREAD REPAIR FILE File No. 1 2 8 Thread 11, 12, 13, 14, 1, 18, 20, 24 TPI 9, 10, 12, 1, 20, 27, 28, 32 TPI 2.20.1 2.20.2 0.75, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, 3.0mm 2.20.8 Restore damaged external threads on studs, bolts, screws, plumbing pipe and pipe fittings Four different high carbon steel files available. Each file provides 4 to 8 different thread pitches Restores rusted or corroded fasteners Doubles as a screw pitch gage : 8-1/2 x 7/1 TOOLS FILE ACCESSORIES THREAD-ON FILE HANDLES FILE CARD/BRUSH 2.05.10 Sharp steel bristles remove filings from file grooves Brush removes finer filings and helps in cleaning up work area File 2.04.5 8 2.04.10 10 2.04.15 12 2.04.20 Case hardened threaded steel insert holds files tang firmly in handle Waxed White Birch Wood handles Heavy Gauge steel ferrules zinc plated -4-3
4 Files Your Single Source Supplier -4-4
Misc Cutting Tools 5 CUTTING COUNTERSINKS COUNTERSINKS CHATTERPROOF (SUPER PREMIUM) Shank. 1/4 x 2 3/8 1.2.14 5/1 x 2-3/1 3/8 1.2.5 3/8 x 2-5/8 1/2 1.2.38 7/1 x 2-3/4 1/2 1.2.71 1/2 x 2-13/1 1/2 1.2.12 82 Piloted Single Cutting Edge Easily Resharpened COUNTERSINKS 4 FLUTE Shank. 1/2 x 3-7/8 1/2 1.27.012 5/8 x 4 1/2 1.27.058 3/4 x 4-1/8 1/2 1.27.034 7/8 x 4-1/4 1/2 1.27.078 1 x 4-1/4 1/2 1.27.01 High speed steel 82 COUNTERSINKS SINGLE FLUTE Shank. 3/1 x 1-1/2 3/1 1.27.31 1/4 x 1-1/2 1/4 1.27.14 5/1 x 1-5/8 1/4 1.27.51 3/8 x 1-3/4 1/4 1.27.38 1/2 x 2 1/4 1.27.12 5/8 x 2-1/4 3/8 1.27.58 High speed steel 82 Shank. 3/4 x 2-5/8 1/2 1.27.34 7/8 x 2-7/8 1/2 1.27.78 1 x 2-3/4 1/2 1.27.1 1-1/4 x 2-3/4 3/4 1.27.114 1-1/2 x 2-7/8 3/4 1.27.112 REAMERS CHUCKING CHUCKING REAMER Flute No. of Flutes 1/8 7/8 3-1/2 1.015.18 3/1 1-1/8 4-1/2 1.015.31 1/4 1-1/2 1.015.14 3/8 1-3/4 7 1.015.38 1/2 2 8 1.015.12 9/1 2 8 1.015.91 5/8 2-1/4 9 1.015.58 3/4 2-1/2 9-1/2 1.015.34 Right hand helix right hand cut Straight shank High speed steel Use for general reaming of blind holes HEX SHANK SPIRAL FLUTE CONSTRUCTION REAMERS Point Minimum Starting Hole SPIRAL FLUTE CAR REAMER REAMERS HEX SHANK SPIRAL FLUTE Hex Shank Wrench 9/1.343 7/1 5-7/8 1-1/1 1.1.91 5/8.343 7/1-3/8 1-1/1 1.1.58 11/1.375 15/32-3/8 1-1/1 1.1.111 13/1.48 35/4-7/8 1-1/4 1.1.131 15/1.585 5/8-7/8 1-7/1 1.1.151 1-1/1.807 7/8-7/8 1-5/8 1.1.1111 1-3/1.719 1-7/8 1-13/1 1.1.1131 REAMERS SPIRAL FLUTE Hex shank reamers allow for tool to be used with sockets Specifically designed for reaming structural steel plates commonly found in truck frames, rail cars, bridges and large vessels. For use only to enlarge previously drilled holes. M7 steel Point Minimum Starting Hole Shank 3/8.250 5/1 4-5/8 3/8 1.15.38 1/2.281 3/8 5-7/8 1/2 1.15.12 9/1.343 7/1 5-7/8 1/2 1.15.91 5/8.343 7/1-3/8 1/2 1.15.58 3/4.40 1/2-7/8 1/2 1.15.34 1.594 7/8-7/8 1/2 1.15.1 Three flats on shanks Designed for enlarging existing holes in structural steel plate found in truck frames, rail cars, bridges and pressure vessels Left hand spiral with right hand cut eliminates hogging into holes and the need for stop collars Amber gold surface treatment aids lubricity 1.15.04-4pc Standard Flute Set Includes s: 3/8, 1/2, 5/8, 3/4 1.15.004-4pc Fast Spiral Set Includes s: 3/8, 1/2, 5/8, 3/4 1.15.040-4pc Fast Spiral Set Includes s: 5/1, 3/8, 7/1, 1/2 All sets come in a HIgh impact Plastic case: -5-1
5 Misc Cutting Tools REAMERS SPIRAL FLUTE (continued) HIGH SPIRAL FLUTE CAR REAMER HEAVY-DUTY Flute 3/8 2-3/4 4-5/8 1.18.38 1/2 4 5-7/8 1.18.12 9/1 4 5-7/8 1.18.91 5/8 4-1/2-3/8 1.18.58 3/4 5-7/8 1.18.34 7/8 5-7/8 1.18.78 1 5-7/8 1.18.1 Designed for heavy duty reaming of structural steel assemblies Tapered at the point for holes out at alignment 1/2 Shank with 3 flats REAMERS BRIDGE REAMERS HIGH SPEED STEEL BRIDGE REAMERS Flute 15/1 7-3/8 12 1.41.10 Straight Shank Commonly used on bridgework, ship construction and structural steel fabrication where extrem accuaracy of diameter is not important Reamers have pilot type points for alignment purposes and easy entry into small and off-center holes END MILLS DOUBLE-END, 4-FLUTE, CENTER CUT END MILLS DOUBLE END 4 FLUTE MILLS Mill Flute Shank 1/8 3/8 3/8 55.04.18 3/1 1/2 3/8 55.04.31 1/4 5/8 3/8 55.04.14 5/1 3/4 3/8 55.04.51 3/8 3/4 3/8 55.04.38 1/2 1 1/2 55.04.12 5/8 1-3/8 5/8 55.04.58 3/4 1-5/8 3/4 55.04.34 1 1-7/8 1 55.04.1 Double-End Center Cut End Mills are designed for economical profiling and milling of slots, pockets and where plunge cutting is desired. Multi-flute design produces a finer surface finish on work that has previously been roughed out. Made from high speed steel END MILLS DOUBLE-END, 2-FLUTE, CENTER CUT END MILLS DOUBLE END 2 FLUTE MILLS Mill Flute Shank 1/8 3/8 3/8 55.02.18 5/32 7/1 3/8 55.02.532 3/1 7/1 3/8 55.02.31 1/4 1/2 3/8 55.02.14 9/32 9/1 3/8 55.02.932 5/1 9/1 3/8 55.02.51 11/32 9/1 3/8 55.02.1132 3/8 9/1 3/8 55.02.38 13/32 13/1 1/2 55.02.1332 7/1 13/1 1/2 55.02.71 15/32 13/1 1/2 55.02.1532 1/2 13/1 1/2 55.02.12 9/1 1-1/8 5/8 55.02.91 5/8 1-1/8 5/8 55.02.58 11/1 1-5/1 3/4 55.02.111 3/4 1-5/1 3/4 55.02.34 7/8 1-9/1 7/8 55.02.78 1 1-5/8 1 55.02.1 Double-End Two-Flute End Mills are designed for economical general-purpose milling of keyways, slots and pockets. Two-Flute End Mills are sometimes called Slot Drills and are recommended for roughing out slots and deep pockets because their deep flutes are less prone to loading or clogging with chips. Two-Flute End Mills can be used to plunge cut or drill into the work piece. Made from high speed steel END MILLS ROUGHING END MILLS ROUGHING MILLS Mill Flute Shank No. of Flutes 1/4 5/8 3/8 3 2-7/1 55.05.14 5/1 3/4 3/8 3 2-1/2 55.05.51 1/2 1-1/4 1/2 4 3-1/4 55.05.12 5/8 1-5/8 5/8 4 3-3/4 55.05.58 3/4 1-5/8 3/4 4 3-7/8 55.05.34 High Speed Steel For extremely rapid stock removal -5-2
END MILLS SINGLE-END, 2-FLUTE, CENTER CUT END MILLS CUTTING TOOLS Misc Cutting Tools 5 (CENTER CUT) SINGLE END 2 FLUTE MILLS Mill Flute Shank 1/8 3/8 3/8 55.2.18 5/32 3/8 3/8 55.2.532 3/1 7/1 3/8 55.2.31 1/4 1/2 3/8 55.2.14 9/32 1/2 3/8 55.2.932 5/1 9/1 3/8 55.2.51 3/8 9/1 3/8 55.2.38 7/1 13/1 3/8 55.2.71 1/2 13/1 3/8 55.2.12 9/1 1-1/8 1/2 55.2.91 5/8 1-1/8 1/2 55.2.58 3/4 1-5/1 5/8 55.1.02.34 13/1 1-1/2 5/8 55.2.131 7/8 1-1/2 5/8 55.1.02.78 15/1 1-1/2 5/8 55.2.151 1 1-1/2 3/4 55.1.02.1 1-1/8 1-5/8 7/8 55.2.1118 Mill Flute Shank 1-1/4 1-5/8 7/8 55.2.114 M4 7/1 3/8 55.20.4 M5 7/1 3/8 55.20.5 M5.5 1/2 3/8 55.20.55 M 1/2 3/8 55.20. M7 9/1 3/8 55.20.7.0 M8 9/1 3/8 55.20.8 M9 9/1 3/8 55.20.9 M10 13/1 3/8 55.20.10 M11 13/1 3/8 55.20.11 M12.5 1 1/2 55.20.125 M13 1 1/2 55.20.13 M14 1-1/8 1/2 55.20.14 M1 1-5/1 5/8 55.20.1 M17 1-5/8 5/8 55.20.17 M19 1-5/8 3/4 55.20.19 High Speed Steel Designed for general purpose milling of keyways, slots and pockets Furnished with right-hand cut, right-hand helix END MILLS SINGLE-END, 4-FLUTE END MILLS SINGLE END 4 FLUTE MILLS Mill Flute Shank 1/8 3/8 3/8 55.4.18 3/1 1/2 3/8 55.4.31 7/32 9/1 3/8 55.4.732 9/32 11/1 3/8 55.4.932 5/1 3/4 3/8 55.4.51 11/32 3/4 3/8 55.4.1132 3/8 3/4 3/8 55.4.38 7/1 1 3/8 55.4.71 15/32 1-1/4 3/8 55.4.1532 1/2 1 3/8 55.4.12 9/1 1-3/8 1/2 55.4.91 Mill Flute Shank 11/1 1-5/8 1/2 55.4.111 13/1 1-7/8 5/8 55.4.131 M5 7/1 3/8 55.40.5 M 5/8 3/8 55.40. M8 3/4 3/8 55.40.8 M10 1 3/8 55.40.10 M14 1-3/8 1/2 55.40.14 M1 1-5/8 5/8 55.40.1 M20 1-7/8 5/8 55.40.20 M22 1-7/8 7/8 55.40.22 High Speed Steel For general purpose profiling and milling of slots and pockets Furnished with right-hand cut, right-hand helix END MILLS SINGLE-END, 4-FLUTE, CENTER CUT END MILLS (CENTER CUT) SINGLE END 4 FLUTE MILLS Mill Flute Shank 5/8 1-3/8 5/8 55.4.058 3/4 1-5/8 3/4 55.4.034 7/8 1-7/8 3/4 55.4.078 1 1-7/8 3/4 55.4.01 Center cutting High Speed Steel Designed for general purpose profiling and milling of slots and pockets Furnished with right-hand cut, right-hand helix END MILLS SOLID CARBIDE, SINGLE END, 2-FLUTE END MILLS Mill Flute Shank 1/4 1/32 1/8 55.22.14 1/1 3/1 1/8 55.22.11 7/4 3/8 1/8 55.22.74 9/4 5/8 3/1 55.22.94 5/32 1/2 3/1 55.22.532 11/4 5/8 3/1 55.22.114 13/4 5/8 1/4 55.22.134 7/32 5/8 1/4 55.22.732 3/8 7/8 3/8 55.22.38 7/1 1 7/1 55.22.71 5/8 1-1/4 5/8 55.22.58 3/4 1-1/2 3/4 55.22.34 1 1-1/2 1 55.22.1-5-3
5 Misc Cutting Tools END MILLS SOLID CARBIDE, SINGLE BALL END, 2-FLUTE END MILLS Mill Flute Shank 1/32 5/4 1/8 55.21.132 1/1 3/1 1/8 55.21.11 1/8 1/2 1/8 55.21.18 3/1 5/8 3/1 55.21.31 1/4 3/4 1/4 55.21.14 5/1 13/1 5/1 55.21.51 3/8 7/8 3/8 55.21.38 7/1 1 7/1 55.21.71 1/2 1 1/2 55.21.12 1 1-1/2 1 55.21.1 END MILLS SOLID CARBIDE, DOUBLE-END, 4-FLUTE END MILLS SOLID CARBIDE DOUBLE END 4 FLUTE MILLS Mill Flute Shank 1/8 1/4 1/8 55.01.18 3/1 3/8 3/1 55.01.31 1/4 1/2 1/4 55.01.14 5/1 1/2 5/1 55.01.51 3/8 1/2 3/8 55.01.38 7/1 9/1 7/1 55.01.71 1/2 5/8 1/2 55.01.12 Square End-Center Cutting CUTTING HIGH SPEED STEEL ANNULAR ANNULAR CUTTERS Cut Depth 7/1 1 55.41.1.71 1/2 1 55.41.1.12 9/1 1 55.41.1.91 5/8 1 55.41.1.58 11/1 1 55.41.1.111 3/4 1 55.41.1.34 13/1 1 55.41.1.131 7/8 1 55.41.1.78 1 1 55.41.1.1 1-1/1 1 55.41.1.1.111 7/1 2 55.41.2.71 1/2 2 55.41.2.12 9/1 2 55.41.2.91 Cut Depth 5/8 2 55.41.2.58 11/1 2 55.41.2.111 3/4 2 55.41.2.34 13/1 2 55.41.2.131 7/8 2 55.41.2.78 15/1 2 55.41.2.151 1 2 55.41.2.1 1-1/1 2 55.41.2.1.111 1-1/8 2 55.41.2.118 1-1/4 2 55.41.2.114 1-3/8 2 55.41.2.138 13/1 3 55.41.3.131 15/1 3 55.41.3.151 Quickly and effciently produces large diameter holes High Speed Steel 3/4 Shank Made in England CUTTING ANNULAR CUTTER PILOTS ANNULAR CUTTER PILOTS Pilot Drill For 1 Cut Depth 55.41.0.1 2 Cut Depth 55.41.0.2 3 Cut Depth 55.41.0.3 4 Cut Depth 55.41.0.4-5-4
Misc Cutting Tools 5 CUTTING CARBIDE TOOL BITS CARBIDE GRADE C2 - CAST IRON AND NON-FERROUS METALS C5/C - STEEL AND FERROUS METALS STRAIGHT TURNING TOOLS RIGHT HAND Tool Shank Carbide No. Grade AR 3/8 C2 1.030.2 AR 3/8 C 1.030. AR8 1/2 C2 1.030.82 AR8 1/2 C 1.030.8 Styles AR + AL Carbide tipped LEFT HAND Tool Shank Carbide No. Grade AL 3/8 C 1.031. AL8 1/2 C 1.031.8 SQUARE NOSE TOOLS Tool Shank Carbide No. Grade C4 1/4 C2 1.034.42 C5 5/1 C2 1.034.52 C 3/8 C5 1.034.5 C 3/8 C 1.034. C8 1/2 C 1.034.8 Style C Carbide tipped POINTED NOSE TOOLS 80 INCLUDED ANGLE Tool Shank Carbide No. Grade D 3/8 C2 1.035.2 D7 7/1 C5 1.035.75 Style D Carbide tipped BURS CARBIDE 1/4 SHANK CYLINDRICAL Bulk Pack Bulk Pack. Qty SA-1 1/4 1.01.1005 10 1.01.1005.1 SA-2 5/1 1.01.1008 SA-3 3/8 1.01.100 SA-4 7/1 1.01.1007 SA-5 1/2 1.01.1010 SA-9 1 1.01.1004 5 1.01.1004.1 SA-11 1/8 1.01.1003 SA-14 3/1 1.01.1009 Ground Double-Cut Fast stock removal without large chips CYLINDRICAL BALL NOSE Bulk Pack Bulk Pack. Qty SC-1 1/4 1.01.1014 10 1.01.1014.1 SC-2 5/1 1.01.101 SC-3 3/8 1.01.1015 SC-5 1/2 1.01.1020 POINTED TREE. SG-1 1/4 1.01.103 SG-3 3/8 1.01.1040 SG-5 1/2 1.01.1038 SG-15 3/4 1.01.1048 OVAL. SE-1 1/4 1.01.1028 SE-3 3/8 1.01.1027 14 INCLUDED ANGLE Bulk Pack Bulk Pack. Qty SL-1 1/4 1.01.1041 SL-3 3/8 1.01.1045 SL-4 1/2 1.01.1050 10 1.01.1050.1 CYLINDRICAL WITH END CUT Bulk Pack Bulk Pack. Qty SB-1 1/4 1.01.1011 SB-2 5/1 1.01.1012 SB-3 3/8 1.01.1013 SB-5 1/2 1.01.10133 10 1.01.10133.1 SB-5SC* 1/2 1.01.10134 SB-11 1/8 1.01.10131 SB-14 3/1 1.01.10132 * single cut BALL Bulk Pack Bulk Pack. Qty SD-12 1/8 1.01.1022 10 1.01.1022.1 SD-1 1/4 1.01.1021 10 1.01.1021.1 SD-3 3/8 1.01.1023 SD-5 1/2 1.01.1025 ROUND TREE. SF-1 1/4 1.01.1031 SF-3 3/8 1.01.1030 SF-4 7/1 1.01.1033 SF-5 1/2 1.01.1035 SF-14 3/4 1.01.1032 FLAME. SH-41 1/8 1.01.1043 SH-53 3/1 1.01.1044 SH-1 1/4 1.01.104 SH-2 5/1 1.01.1047 SH-5 1/2 1.01.1042 SH-7 3/4 1.01.1049 INVERTED CONE Head SN-4 1/2 1.01.1052 CONE Head SM-3 1/4 1.01.1051 SM-5 1/2 1.01.1053-5-5
5 Misc Cutting Tools BURS CARBIDE 1/4 SHANKBURR SETS & STANDS CARBIDE BUR SETS Description Set Contents Carbide Bur Set w/ Stand Carbide Bur Set w/ Index One each of the following: SA-1, SA-5, SC-3, SC-5, SD-5, SF-3, SF-5, SG-3, SL-3, SL-4 One each of the following: SA-5, SC-3, SC-5, SD-5, SE-3, SF-3, SF-5, SG-3, SG-5, SL-4 1.01.100 1.01.105 METAL STAND Description Stand 1.01.1001 Can be bench or wall mounted Holds up to 24 tools with 1/4 shanks BURS EXTRA LENGTH DOUBLE CUT CARBIDE SHANK Made in the USA Fast Stock Removal wihtout large chips Double cut extended shank For all ferrous applications CYLINDR NO END CUT IND No. SA-1L 1/4 1.17189 SA-3L 3/8 1.17239 SA-5L 1/2 1.17289 CYLINDER RADIUS END IND No. SC-1L 1/4 1.1779 SC-3L 3/8 1.17819 SC-5L 1/2 1.1789 BALL SHAPE IND No. SD-1L 1/4 1.18059 SD-3L 3/8 1.18099 SD-5L 1/2 1.18139 OVAL SHAPE IND No. SE-1L 1/4 1.18289 SE-3L 3/8 1.18309 SE-5L 1/2 1.18339 FLAME IND No. SH-2L 5/1 1.18909 SH-5L 1/2 1.18929 TREE SHAPE IND No. SF-1L 1/4 1.18489 SF-3L 3/8 1.18519 SF-5L 1/2 1.1859 TAPER SHAPE-14 INCLUDED ANGLE IND No. SL-1L 1/4 1.19199 SL-3L 3/8 1.19229 SL-4L 1/2 1.19259 POINTED TREE SHAPE IND No. SG-1L 1/4 1.18749 SG-3L 3/8 1.18779 SG-5L 1/2 1.18809 BURS CARBIDE 1/8 SHANK CYLINDRICAL SN-4 1/2 1.01.2005 CYLINDRICAL WITH END CUT SB-51 1/4 1.01.2010 CYLINDRICAL BALL NOSE SC-51 1/4 1.01.2015 BALL SD-51 1/4 1.01.2020 OVAL SE-53 3/1 1.01.2025 ROUND NOSE TREE SF-51 1/4 1.01.2030 POINTED CONE SM-51 1/4 1.01.2050 INVERTED CONE SN-51 1/4 1.01.2075 INVERTED CONE SN-53 3/1 1.01.207-5-
Misc Cutting Tools 5 BURS MINIATURE CARBIDE 1/8 SHANK FLAME SH-41 1/8 1.01.1043 SH-53 3/1 1.01.1044 CYLINDRICAL SA-41 1/1 1.01.2002 CYLINDRICAL SA-42 3/32 1.01.2003 BALL Bulk Pack Bulk Pack Qty. SD-41 3/32 1.01.2007 10 1.01.2007.1 CYLINDRICAL WITH END CUT SB-43 1/8 1.01.2008 CYLINDRICAL BALL NOSE SC-42 1/8 1.01.2012 OVAL SE-41 1/8 1.01.2021 ROUND TREE SF-42 1/8 1.01.2028 14 INCLUDED ANGLE SL-41 1/8 1.01.200 INVERTED CONE SN-41 3/32 1.01.2070 INVERTED CONE SN-42 1/8 1.01.2072 BURS ALUMINUM CUTTING CARBIDE 1/4 SHANK CYLINDRICAL. SA-1A 1/4 1.01.3001 SA-3A 3/8 1.01.3002 CYLINDRICAL BALL NOSE. SC-1A 1/4 1.01.3011 SC-3A 3/8 1.01.3012 BALL SHAPE. SD-1A 1/4 1.01.3021 SD-3A 3/8 1.01.3022 OVAL SHAPE. SE-1A 1/4 1.01.3031 SE-3A 3/8 1.01.3032 ROUND TREE SHAPE. SF-1A 1/4 1.01.3041 SF-3A 3/8 1.01.3042 High flute design for easy chip flow and fast stock removal Provides minimum loading when cutting soft, sticky metals 14 INCLUDED ANGLE. SL-1A 1/4 1.01.3051 SL-3A 3/8 1.01.3052 SCREW EXTRACTORS SQUARE TAPERED FLUTE DOUBLE-EDGE SCREW EXTRACTORS Description Drill. Screw Min Max Min Max Screw Extractor - 1 1/8 3/1 3/1 1/4 1.121.1 Screw Extractor - 2 3/1 9/32 5/1 3/8 1.121.2 Screw Extractor - 3 1/4 3/8 7/1 1/2 1.121.3 Screw Extractor - 4 11/32 1/2 1/2 9/1 1.121.4 Screw Extractor - 5 7/1 5/8 5/8 3/4 1.121.5 Screw Extractor - 9/1 3/4 7/8 1 1.121. Screw Extractor - 7 3/4 15/1 1 1-1/8 1.121.7 5-Pc Extractor Set (s 1-5-in Plastic Pouch) 1.121.8 Removes broken screws & bolts Patented double-edged screw extractors are made from hardened chrome vanadium steel with a burnished finish. The cutting edges are polished and dimensions are laser marked on the shank for easy identification -5-7
5 Misc Cutting Tools SQUARE EXTRACTORS Screw To Remove of Drill Extractor Screw Extractor No. of Screw Shank Point E 1* 3/1-9/32 3/1 1/8 1/8* 1.430.1 E 2* 9/32-11/32 1/4 11/4 3/1* 1.430.2 E 3* 11/32-1/2 5/1 7/32 1/4* 1.430.3 E 4* 1/2-3/4 3/8 9/32 5/1* 1.430.4 E 5 5/8-7/8 7/1 21/4 3/8 1.430.5 E 7/8-1 1/2 7/1 1/2 1.430. E 7 1-1-1/4 5/8 1/2 9/1 1.430.7.0 E 8 1-1/8-1-1/2 3/4 9/1 5/8 1.430.8 E 9 1-1/4-1-3/4 7/8 5/8 11/1 1.430.9 *These items are included in set #1.43.99 SPIRAL SCREW EXTRACTORS Screw Extractor No. To Remove of Screw SCREW EXTRACTORS SQUARE (continued) SCREW EXTRACTORS SPIRAL of Screw Extractor Shank Point Drill Four Piece Set in a Vinyl Pouch #2, 3, 4, 5 1.43.97 Extractors & Left Handed Drill Set in Metal Index (8 pc.) 5 Piece Spiral set in a Vinyl Pouch Set includes: EX1, EX2, EX3, EX4 & EX5 EX 1 3/32 to 5/32 1/8.00 5/4 1.42.1 EX 2 5/32 to 7/32 3/1.080 7/4 1.42.2 EX 3 7/32 to 9/32 1/4 1/8 5/32 1.42.3 1.42.99 EX 4 9/32 to 3/8 and 1/8 pipe 5/1 3/1 1/4 1.42.4 EX 5 3/8 to 5/8 and 1/4 pipe 7/1 1/4 17/4 1.42.5 1.42.98 EX 5/8 to 7/8 and 3/8 pipe 5/8 3/8 13/32 1.42. EX 7 7/8 to 1-1/8 and 1/2 pipe 7/8 15/32 17/32 1.42.7.0 EX 8 1-1/8 to 1-3/8 and 3/4 pipe 11/32 3/4 13/1 1.42.8 EX 9 1-3/8 up and 1 pipe 1-9/32 1 1-1/8 1.42.9 Extractors & Left Handed Drill Set in Metal Index 10 pc. Removes broken screws, bolts, threaded parts and pipe To remove a broken threaded part: Drill a hole in the end of the part with a left hand spiral drill (the left handed drill will not further tighten the part and will often remove the part itself), then insert the extractor and turn counter clockwise using a wrench SCREW EXTRACTORS POWER TYPE 1.43.99 Metal Index Replacement 1.43.98 DRILL OUT BROKEN BOLT & SCREW EXTRACTORS Regular Style Combines a left handed drill and a screw extractor into one tool Removes broken bolts, screws, and studs, 4 Piece Set Regular 1.12.04 including Gr. 8 and stainless steel cap screws Self-centering point allows you to drill on center of broken fastener easier 1.12.04 X-OUT SCREW EXTRACTORS X-out Screw No. 1 # #8 1.12.08 No. 2 #8 #10 1.12.0810 No. 3 #10 #14 1.12.01014 Set Set of all 3 in storage case 1.12.003 Damaged Screw Remover No Drilling Required Long Life - Reusable Designed for use in a variable speed hand drill, set for reverse and slow speed Removes all types of screws: Phillips, Slotted, Hex, Torx, Tri-wing, Pozidriv, Frearson, most tamper-proof screws and many more DRILL-OUT/X-OUT COMBO SET 1.12.05 10 Piece combo set packed in a handy plastic case Includes Drill-Out sizes: Flip style: #5/-3mm, #8-4mm, #10/12-5mm, 1/4 -mm Regular style: 5/1-8mm, 3/8-10mm, 1/2-12mm Includes X-Out sizes: #1, #2, #3 ARCH PUNCHES 1/4 90.50.14 3/8 90.50.38 1/2 90.50.12 5/8 90.50.58 3/4 90.50.34 For punching holes in leather, rubber, gasket material, and soft metals Inside taper for clearance H e at tr e ate d S h ef f i e l d fo r g e d s te e l -5-8