Quick Ship Square Bronze over Galvanized Straight Steel Pole - 4 Bolt Base Square Straight Steel - 4 Bolt Base Light Poles Optional Tenon Mounting (specify) "D" Top Diameter Arm Drilling Per Customer Specs. "B" Wall Carbon Steel With Bronze Powder Coated over Galvanized "A" WARNING: Do not install light pole without luminaire. "E" Sq. '-6" Grounding Provision Opposite Handhole Reinforced Handhole (3" x 5") With Steel Cover And Stainless Steel Screws (See Detail) "C" Butt Diameter ABS Plastic Base Cover (4) Anchor Bolts Per AASHTO M34-90, Grade 55, Top 0" Galvanized Per ASTM A53, With Galv. Stl. Hex. Nuts, Lockwashers & Flatwashers Bolt Circle "F" Dia. "G" Notes: ) All Material Shall Be Weldable-Grade, Hot-Rolled, Commercial Quality Carbon Steel Tubing. Base Plate and Handhole Material Shall Conform to ASTM A36. All Welds Shall Conform To AWS D. Using E70xx Electrodes. 2) Calculations Based Upon AASHTO Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals, 994 Edition, Using An Weight of 25 lbs Per Sq Ft of. Height Coefficients Based On Formula, (H/30)^(/7). 's Are Calculated At Top Of Shaft. All Welds Shall Conform To AWS D. Using E70xx Electrodes.
Quick Ship Square Bronze over Galvanized Straight Steel Pole - 4 Bolt Base Square Straight Steel - 4 Bolt Base Light Poles Catalog # Mt. height Wall thickness Shaft size Base size Bolt circle Bolt projection SSP0 4.2 0 ft. gauge 4x4 in. in. 8- in. 2.75 in. 3/4x7x3in. 76 lbs. 28 22.4 20 6.4 3.8.6 9.8 SSP2 4.2 2 ft. gauge 4x4 in. in. 8- in. 2.75 in. 3/4x7x3in. 88 lbs. 22.4 7.8 5.8 2.8 0.6 8.8 7.2 SSP4 4.2 4 ft. gauge 4x4 in. in. 8- in. 2.75 in. 3/4x7x3in. 0 lbs. 8.2 4.2 2.6 0 8.2 6.6 5.4 SSP5 4.2 5 ft. gauge 4x4 in. in. 8- in. 2.75 in. 3/4x7x3in. 07 lbs. 6. 2.5 0.9 8.5 6.9 5.4 4.4 SSP6 4.2 6 ft. gauge 4x4 in. in. 8- in. 2.75 in. 3/4x7x3in. 3 lbs. 5.6 0 7.8 6.2 4.8 3.8 SSP8 4.2 8 ft. gauge 4x4 in. in. 8- in. 2.75 in. 3/4x7x3in. 26 lbs. 2 9 7.8 6 4.4 3.4 2.4 SSP20 4.2 20 ft. gauge 4x4 in. in. 8- in. 2.75 in. 3/4x7x3in. 38 lbs. 9.6 7 6 4.4 3 2.2 Bolt size Pole weight 90 00 0 20 30 40 50 Calculations based on AASHTO 200 specifications Maximum Combined Design Weight Is 25 lbs. per sq. ft. of E.P.A. (i.e. - 4.4 sq. ft. E.P.A. x 25 lbs. = 0 lbs.) Available Finishes ** For a complete catalog number, add the 2-digit finish code to this product s catalog number in place of **. BZ Powder Coat, Dark Bronze over Galvanized Note: Specifications subject to change without notice
AREA LIGHT Applications: Auto dealerships, parking lots, walkways, roadways, campuses, facade lighting, grocery stores and other public areas. Features The one piece die-cast aluminum housing with UV resistant polycarbonate optical lens, outstanding corrosion protection. Voltage is 20-277V & 347/480V Suitable for mounting heights ranging from 8-36 in area lighting applications Lumen ouput from 9000-40000lm with efficacy up to 30lm/W. Round pole and square pole mounting, direct wall mounting, slipfitter mounting options available Long lasting with lifespan 50,000 hrs Fixtures are IP66 rated and suitable for use in ambients from -40 to 45 (-40 to 3). Various distribution patterns including Type and Type and Type UL Wet location listed and DLC qualified Small Size: 70W/05W Medium Size: 50W/200W Large Size: 250W/300W LED Product Partner Photocontrol Optional photocontrol allows for further energy saving. Housing Features a compact, one-piece die cast housing, saving costs versus models that are extruded or cast and require additional parts. The heat sink is included in the actual casting, further minimizing the need for additional parts. Standard Arm Mount The design features an integral arm, increasing strength and simplifying installation. PIR Sensor Optional PIR sensor allows for security and energy saving LED Light Engine IP66 rated LED light engine eliminates the need for a glass lens for maximum light output. Use of latest generation LEDs means more light from fewer LEDs, resulting in lower costs.
PERFORMANCE DATA 4000K(70CRI) 5000K(70CRI) SYSTEM WATTS DIST.TYPE LUMENS LPW B U G LUMENS LPW B U G 70W 05W 50W 200W 250W 300W 3 9000lm 29 lm/w 2 3 2 9000lm 29 lm/w 2 3 2 5 9500lm 36 lm/w 3 3 9500lm 36 lm/w 3 3 3 3400lm 28 lm/w 3 2 2 3400lm 28 lm/w 3 2 2 5 3400lm 28 lm/w 3 2 3400lm 28 lm/w 3 2 3 20000lm 33 lm/w 3 2 2 20000lm 33 lm/w 3 2 2 4 9000lm 26 lm/w 3 2 3 9000lm 26 lm/w 3 2 3 5 20500lm 37 lm/w 4 2 2 2000lm 40 lm/w 4 2 2 3 24500lm 23 lm/w 3 2 2 24500lm 23 lm/w 3 2 2 4 23500lm 8 lm/w 3 2 3 23500lm 8 lm/w 3 2 3 5 24500lm 23 lm/w 4 2 2 24500lm 23 lm/w 4 2 2 3 33000lm 32 lm/w 4 2 3 33000lm 32 lm/w 4 2 3 4 32000lm 28 lm/w 4 2 4 32000lm 28 lm/w 4 2 4 5 35000lm 40 lm/w 5 2 2 36500lm 46 lm/w 5 2 2 3 38000lm 27 lm/w 4 2 3 39000lm 30 lm/w 4 2 3 4 36000lm 20 lm/w 4 2 4 36000lm 20 lm/w 4 2 4 5 40000lm 33 lm/w 5 2 2 40000lm 33 lm/w 5 2 2 OF AREA LIGHT Item 2 @90 2 @20 2@80 3 @90 3 @20 4 @90 70W/05W 0.626 0.705 0.97 0.98 0.982 0.975 0.982 50W/200W 0.667 0.742.62.65.67.63.67 250W/300W 0.847 0.996.629.634.636.632.636 ELECTRIC DATA Number Of Drivers 2 Driver Current (Amps) 750 2600 3800 4900 6400 7700 Nominal Power (W) INPUT VOLTAGE (V) CURRENT (Amps) 70 20 0.58 70 208 0.34 70 240 0.29 70 277 0.25 75 347 0.22 75 480 0.6 05 20 0.88 05 208 0.50 05 240 0.44 05 277 0.38 0 347 0.32 0 480 0.23 50 20.25 50 208 0.72 50 240 0.63 50 277 0.54 50 347 0.43 50 480 0.3 200 20.67 200 208 0.96 200 240 0.83 200 277 0.72 200 347 0.58 200 480 0.42 250 20 2.08 250 208.20 250 240.04 250 277 0.90 250 347 0.72 250 480 0.52 300 20 2.50 300 208.44 300 240.25 300 277.08 300 347 0.86 300 480 0.63
MOUNTING Standard versatile mounting arm accommodates multiple drilling patterns as well as square and round poles Wall Mount available for direct wall mounting and J-box mounting Optional for cast aluminum slipfitter mounting adapter Compatible with more MESTER mounting adaptors such as Tenon, suits for various application Mounting Options Arm Mount 4" and 5" Square and Round poles) Slipfitter Mount Wall Mount Standard versatile mounting arm is simple to install and can be used with existing poles for retrofit installations. An optional cast aluminum mast arm adapter secures fixture head to nominal 2''(2-3/8''O.D. pipe size) horizontal steel tenon arm. Wall Mount is easy to install for direct wall mounting with /2' conduit wiring or standard J-box mounting Mounting Dimensions Drilling Template Square pole Luminaire Luminaire Ø 0.5 5in.26in 0.98in Round pole 5 0.D. Connecting piece 6.96in.26in 0.55in 3.46in DIMENSION unit: inch/mm 50W&200W ( Wall Mount ) 746.98mm(29.4in.) 70W&05W ( Pole Mount ) 50W&200W ( Pole Mount ) 285.9mm(.256in.) 203mm(7.99in.) 50W:8.2lb 200W:9.02lb 370.89mm(4.6in.) 76.98mm(6.97in.) 203mm(7.99in.) 70W:3.45lb 05W:3.84lb 457.5mm(8 in.) 76.98mm(6.97in.) 203mm(7.99in.) 70mm(2.76in.) 578.9mm(22.8in.) 250W:28.63lb 300W:29.36lb 250W&300W ( Pole Mount ) 46.66mm(6.4in.) 9.0mm(0.75in.) 35mm(2.402in.) 92.4mm(3.63in.) 207.9mm(8.9in.) 52mm(5.98in.) 46.66mm(6.4in.) 52mm(5.98in.) 35mm(2.4in.) 52mm(5.98in.) 250W&300W ( Wall Mount ) 540.48mm(2.28in.) 207.9mm(8.9in.) 285.9mm(.26in.) 82mm(3.23in.) 70W&05W ( Wall Mount ) 9mm(0.75in.) 553.48mm(2.79in.) 76.48mm(29.98in.) 578.9mm(22.8in.) 794.5mm(3.27in.) 82mm(3.23in.) 70mm(2.76in.) 70W:lb 05W:.40lb 370.89mm(4.6in.) 75mm(2.95in.) 46.66mm(6.4in.) 589.2mm(23.2in.) 250W:26.99lb 300W:27.72lb 250W&300W ( Slipfitter Mount ) 207.9mm(8.9in.) 285.9mm(.256in.) 50.2mm(9.732in.) 82mm(3.23in.) 76.98mm(29.98in.) 50W:6.47lb 200W:7.38lb 50W&200W ( Slipfitter Mount ) 70W&05W ( Slipfitter Mount ) 370.89mm(4.6in.) 70W:.8lb 05W:.98lb 468.5mm(8.445in.) 70mm(2.76in.) 77.5mm(6.988in.) 76.98mm(6.97in.) 50W:5.70lb 200W:6.60lb 250W:26.26lb 300W:26.96lb 578.9mm(22.8in.)
PHOTOMETRICS Mester offers a complete set of optical systems to meet every site lighting requirement. These systems provide remarkable flexibility in precisely matching light distribution patterns to specific site requirements. Type 3: Type 3 optics produce an asymmetrical pattern that directs the majority of the light forward and equally on both sides of the luminaire. In a back-to-back Type 4: Type 4 is suitable for applications where light is primarily required forward, and minimal backlight is Type 5: Type 5 optics produce a symmetrical square pattern that distributes light equally on all sides of the luminaire. Type 5 luminaires ORDERING GUIDE Example: 05W 27V XXK Y Y Y Y Y Y Fixture Type Wattage Voltage CCT Finish Photocell Sensor Mounting Photometry Surge Protection 05W 27V XXK Y Y Y Y Y Y Area Light 70 70W 75 75W 05 05W 27V 20-277V 48V 347/480V 40K 4000K 50K 5000K D Dark Bronze B Black W White P0 20-277V Photocell P3 347V Photocell P4 480V Photocell M With 20-277V Sensor M4 With 347-480V Sensor Blank Without Sensor SQ Square Pole Mount SP Slipfitter Mount WM Wall Mount T3 TYPE Photometry T5 TYPE Photometry S Surge protection (Blank) No Surge protection 0 0W SG Silver Gray Blank Without Photocell Example: 50W 27V XXK Y Y Y Y Y Fixture Type Wattage Voltage CCT Finish Photocell Sensor Mounting Photometry 50W 27V XXK Y Y Y Y Y Area Light 50 50W 200 200W 250 250W 27V 20-277V 48V 347-480V 40K 4000K 50K 5000K D Dark Bronze B Black W White P0 P3 P4 20-277V Photocell 347V Photocell 480V Photocell M With 20-277V Sensor M4 With 347-480V Sensor Blank Without Sensor SQ Square Pole Mount SP Slipfitter Mount WM Wall Mount T3 TYPE Photometry T4 TYPE Photometry T5 TYPE Photometry 300 300W SG Silver Gray Blank Without Photocell Note: The Watt is 70W when the voltage is 20-277V,while when it is 347/480V,the watt is 75W. The Watt is 05W when the voltage is 20-277V,while when it is 347/480V,the watt is 0W. ADDITION MOUNTING ACCESSORIES POLE BRACKET For mounting one fixture on an existing pole 76mm(3in.) 02±mm (4.in.) 83.6mm(7.228in.) 4" Square Pole Mount with 2-3/8" O.D. Tenon No. 4SQ-SP-D USE: For use with square, non-tapered steel and aluminum poles. Furnished with four 5/6" hex head stainless-steel bolts. Vertical tenon measures 2-3/8" O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. 06.68mm(4.2in.) 222.5mm(8.76in.) 4" Round Pole Mount with 2-3/8" O.D. Tenon NO. 4SQR-SP-D USE:For use with Round, non-tapered steel and aluminum poles. Furnished with three 3/8" hex head stainless-steel bolts. Vertical tenon measures 2-3/8" O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. 76mm(3in.) 27±mm (5 in.) 83.6mm(7.228in.) 5" Square Pole Mount with 2-3/8" O.D. Tenon No. 5SQ-SP-D USE: For use with square, non-tapered steel and aluminum poles. Furnished with four 5/6" hex head stainless-steel bolts. Vertical tenon measures 2-3/8" O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. 3.86mm(5.9in.) 222.5mm(8.76in.) 5" Round Pole Mount with 2-3/8" O.D. Tenon NO. 5SQR-SP-D USE:For use with Round, non-tapered steel and aluminum poles. Furnished with three 3/8" hex head stainless-steel bolts. Vertical tenon measures 2-3/8" O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. 54.5±mm(6.08 in.) 08.6mm(4.28in.) (4 in.) 02±mm Pole Bracket accessories-tenon & Yoke Adaptor NO. SP-TR-D USE: The 2-3/8 OD Tenon Mount Adaptor for Yoke Fixtures is designed to mount MESTER light fixtures that are equipped with a yoke mount onto a 2-3/8 OD tenon. It may be utilized with the Mester Flood Light Series of light fixtures. 63mm(2.48in.)
ADDITION MOUNTING ACCESSORIES WL BRACKET Attaches to any flat surface Provides wiring access Mid-Pole tenon Bracket 02±mm(4.in.) 60mm (2 3/8in.) 227.2mm(7.76 in.) 52.4mm(6in.) 90 Wall Mount Bracket with 2-3/8" O.D. Tenon NO. WM-SP-D USE: The 90 wall mount bracket with 2-3/8" tenon attaches an MESTER floodlight to almost any surface: wall, roof, or wood pole. Provides wiring access and abuilt-in 2-3/8" O.D. tenon to mount a fixture with our adjustable slipfitter. Suggested 3/8" diameter bolts for mounting. Mounting holes are spaced 3-/4" apart. 80mm(7.086 in.) 00mm(3.94 in.) 85mm(7.28in.) 2-3/8 OD Horizontal Tenon Mid-Pole Bracket NO. SQ-SP-D USE:2-3/8 OD Horizontal Tenon Mid-Pole Bracket is designed to mount light fixture that is equipped with a adjustable slipfitter onto a 2-3/8 OD horizontal tenon Round External Mount Horizontal Tenon To mount 2/3/4 fixtures on a existing pole 84mm(7.25in.) Double 90 Horizontal Tenon Adaptor NO. R60-SP2-90-D vertical tenon. Two fixtures can be mounted to the Round External 84mm(7.25in.) Triple 20 Horizontal Tenon Adaptor NO. R60-SP3-20-D vertical tenon. Three fixtures can be mounted to the Round External 84mm(7.25in.) Double 80 Horizontal Tenon Adaptor NO. R60-SP2-80-D vertical tenon. Two fixtures can be mounted to the Round External 84mm(7.25in.) Quad 90 Horizontal Tenon Adaptor NO. R60-SP4-90-D vertical tenon. Four fixtures can be mounted to the Round External 84mm(7.25in.) Triple 90 Horizontal Tenon Adaptor NO. R60-SP3-90-D vertical tenon. Three fixtures can be mounted to the Round External Specifications are subject to change without notice. Updated date: 207-2-0