Lecturer Department of Mechanical Engineering BITS Pilani, KK Birla Goa Campus Zuarinagar, Goa 403 726 Phone (0832) 2580416, Mob.-09011091126 E-mail: kiranm@goa.bits-pilani.ac.in malikirand@gmail.com Kiran D. Mali ------------------------------------------------------------------------ Educational Qualification Master of Engineering in Design engineering, M.E. (Mech) Design Engg.- From R. I.T., Shivaji University Kolhapur with distinction in june 2006 Bachelor of Engineering (Mechanical Engg.) From Shivaji University, Kolhapur with First Class in July 2002. Ph. D. Pursuing (Pre submission seminar over) Approved Title of the Thesis Vibration Analysis of Rectangular Plates with Rectangular Penetration Circular Holes for Different Perforation Size and Ligament Efficiencies '. Patterns of Teaching Experience Worked as lecturer in Mech. Engg. Dept. R.I.T. Rajaramnagar from Aug. 2004. to May 2007. Visiting Faculty for B. Tech. (YCMOU): Design Engineering in 2005. Lecturer in Mech. Engg. Dept., BITS Pilani, K.K. Birla Goa Campus from May 2007 to till today.
Courses Taught / Handling Mechanics of solids Dynamics of machines and vibrations Advanced mechanics of solids and Kinematics Mechanical Equipment design Design of Machine Elements Experimental stress analysis Energy Engineering Mechanical Technology Automobile Engineering Workshop practice Transport Phenomena II Internal combustion engines Engineering Graphics Area (s) of Specialization / Research Machine Design and Mechanical Equipment Design Experimental stress analysis Vibration Analysis ACADEMIC PROJECT AT B.E. Optimization & Performance Testing Of Solar Dryer Involves mainly the optimization & performance testing of solar dryer, which can be used for drying of agricultural products such as Grapes, Potato chips, Banana chips etc. ACADEMIC PROJECT AT M.E. Theoretical and Experimental Vibration Analysis of Annular Disc With Inner Edge Clamped and Outer Edge Free With FFT Analyzer Involves vibration Analysis of annular disc structure for different aspect ratios
Workshops /Conferences/Seminars Attended S.No. Category Level Title Year Organized at 1 Conference National National conference on Emerging trends in Mechanical Engineering. 2006 B.M.S. College of Engineering, Bangalore 2 Conference Internationl International conference on Advances in machine Design and Industry Automation 2007 College of Engineering Pune 3 Conference Internationl International conference on Materials, Processing and Characterization(ICMPC 2012) 2012 GRIET Hyderabad, Andra Pradesh. 4 Conference Internationl 57th congress of the Indian Society of Theoretical and Applied Mechanics (An international meet), 2012 Defence Institute of Advance Technology, Pune. 5 Conference National National Conference on Recent Developments In Mech. Engineering,YANTRA-2005 2005 College of engineering Pandharpur 6 Workshop National Recent Trends in Condition monitoring 2005 IIT Delhi 7 Workshop National Energy saving in steam systems 2005 BITS-Pilani, Pilani 8 Workshop National TEQIP sponsored two day workshop on Micro and Precision Engineering 2005 RIT, Rajaramnagar, Maharashtra 9 Workshop Shivaji University TEQIP sponsored one day workshop on Teaching Methodologies for Mechatronics 2005 RIT, Rajaramnagar, Maharashtra 10 Workshop Shivaji University Shivaji University sponsored one day workshop on curriculum Development of B.E. (Mech.) of Revised structure 2006 RIT, Rajaramnagar, Maharashtra 11 Workshop National Two Days Training Programme On Intellectual Property Rights And Patenting India And Abroad 2006 Organized at R.I.T. Rajaramnagar jointly with GCOE Pune and GCOE Aurangabad
Publications in International Journals [1] Kiran D. Mali, Pravin M. Singru (2012). An analytical model to determine fundamental frequency of free vibration of perforated plate by using unit step functions to express non homogeneity. Journal of Vibroengineering 14(3):1292-1298. [2] Kiran D. Mali, Pravin M. Singru (2013). An analytical model to determine fundamental frequency of free vibration of perforated plate by using greatest integer functions to express non homogeneity. Advanced Materials Research, 622-623:600-604. [3] Kiran D. Mali, Pravin M. Singru, (2012). Determination of the fundamental frequency of perforated plate with rectangular perforation pattern of circular holes by negative mass approach for the perforation. International Journal of Advanced Materials Manufacturing and Characterization 1(1):105-109, ISSN-2277-3886. [4] Kiran D. Mali, Pravin M., Singru (2013). An analytical model to determine fundamental frequency of rectangular plate having rectangular array of circular perforations. Journal of Vibroengineering 15(2):588-596. [5] Kiran D. Mali, Pravin M. Singru (2013). Determination of the fundamental Frequency of perforated rectangular plates: Concentrated negative mass approach for the perforation. Advances in Acoustics and Vibration, 2013. [6] Kiran D. Mali, Pravin M. Singru Determination of modal constant for fundamental frequency of perforated plate by Rayleigh's method using experimental values of natural frequency. International journal of Acoustics and Vibration.(Under review)
[7] Kiran D. Mali, Pravin M. Singru, Effect of Ligament Efficiency and Perforation Diameter on Dynamic Performance of Rectangular Perforated Plate with Rectangular Perforation Pattern. Measurement.(Under review) Papers Published/ Presented at International Conferences [8] Kiran D. Mali,N.K. Chhapkhane, S. B. Kumbhar Dynamic Performance analysis of annular disc for different aspect ratio, at International conference on Advances in machine Design and Industry Automation at college of Engineering Pune, January 10-12,2007. [9] D.C. Patil, S.S. Gawade, Kiran D. Mali Dynamic response analysis of rectangular Perforated plates with varying sizes of circular Perforation holes Proceedings of 14th international congress on sound and vibration, Cairns Australia, 9-12 July 2007. [10] Kiran D. Mali,N.K. Chhapkhane, S. B. Kumbhar Vibration Analysis of Annular Disc at National conference on Recent developments in Mechanical Engineering organized by college of engineering Pandharpur during 23rd and 24th Dec2005. [11] Kiran D. Mali,N.K. Chhapkhane, S. B. Kumbhar Vibration Analysis of Annular Disc with FEM software at National conference on Emerging trends in Mechanical Engineering organized by B.M.S. college of engineering Bangalore, 11th and 12th Feb. 2006. [12] Kiran D. Mali, P.M. Singru Vibration analysis of Circular plate with Cut-out using FEM. Proceedings of Recent Advances in Materials, Processing and Characterization (RAM-2008), Siddharatha Engineering College, Vijayawada, Andra Pradesh, July 3-4,2008 [13] Kiran D. Mali, P.M. Singru Determination of The Fundamental Frequency Of Perforated Plate With Rectangular Perforation pattern Of Circular Holes By
Negative Mass Approach For The Perforation presented at International conference on Materials, Processing and Characterization(ICMPC 2012), GRIET Hyderabad, Andra Pradesh,March 8-10, 2012. [14] Kiran D. Mali, P. S. Joshi, P.M. Singru Free vibration analysis of simply supported rectangular plates with rectangular perforation pattern of square holes. Proceedings of the 57th congress of the Indian Society of Theoretical and Applied Mechanics (An international meet), held at Defence Institute of Advance Technology, Pune, on Dec. 17-20, 2012. [15] S. Habbu, P. Mulaye, Kiran D. Mali*, P. M. Singru "Free vibration of rectangular plate with bidirectional parabolic thickness variation" Proceedings of International conference on advances in Mechanical engineering,29-31 may 2013,COEP, Pune, Maharashtra,India. Chapters in Books Kiran D. Mali, Pravin M. Singru. An analytical model to determine fundamental frequency of free vibration of perforated plate by using greatest integer functions to express non homogeneity:- in Manufacturing Science and Technology III, Edited by R. Sivakumar, Trans Tech. Publications, Kreuzstrasse 10, 8635 Durnten-Zurich, Switzerland, December, 2012., ISBN-13: 978-3-03785-563-8 Membership of Professional Organisations Life member of Indian Society For Technical Education ISTE, New Delhi National Certification Exam. Qualified National Certification Examination for Energy Managers and Auditors (Certified Energy Auditor, EA-2975).