Couplers with Connectors (H Type)

Couplers with Connectors (H Type) Nov. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. HDH Series HDH-83GHD HDH-3GH(4) HDH-93GHD(4) Product Specifications Ratings Frequency range (Note) Characteristic impedance Maximum Input Power (Note) Note : The frequency range and the maximum input power will differ depending on the products. The test method conforms to MIL-STD-..5 to 14.5GHz 5ø to 5 W Features 1.High Performance The high frequency characteristics feature extremely low loss, a high degree of matching, and high isolation..power Uniform Distribution and 9 Phase Difference Type This is a one input, two output (or two input, one output) power uniform distribution type having a 9 phase difference between the two outputs (or two inputs). 3.Miniature and Lightweight Corrosion-resistant aluminum is used for the case and the Hirose Electric original pattern design, which uses a stripline triplate method, enables the couplers to be miniature and lightweight. 4.Couplers with SMA Connectors Use of SMA connectors (Hirose Electric HRM Series) which feature stainless steel for the exterior cladding make these couplers durable. Operating temperature range Operating relative humidity -1ç to +65ç 95% Max. Item Standard Conditions 1.Vibration Frequency of 1 to Hz, overall amplitude of 1.5mm, No electrical discontinuity of 1μs or more acceleration of 98m/s for hours in each of 3 directions.shock No damage, cracks, or parts dislocation Acceleration of 49m/s, sine half-wave waveform, 3 cycles in each of the 3 axis 3.Temperature cycle HDH-3GHD HDH-33GHD HDH-183CHD No damage, cracks, or parts dislocation Temperature : _55ç +ç to +35ç +85ç +ç to +35ç Time : 3 max. 3 max. (Minutes) 5 cycles Materials / Finish Part Material Finish Connector Body Stainless steel Passivated Connector female contacts Beryllium copper Gold plating Connector Insulator PTFE --------- Case Aluminum Coating Board Dielectric Gold plating 14

HDH Series Couplers with Connectors (H Type) Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. HD H - 8 3 G H D 1 3 4 5 6 7 8 1 Series Name : HD (Directional Couplers) 4 Coupling 3 : 3dB Type of Connector H : Indicates the HRM (SMA) Series 5 Frequency Relative Bandwidth B : From 5% to below 1% Nov. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. 3 Center Frequency 8 :.75GHz : 1.5GHz 17 : 1.7GHz :.GHz 3 : 3.GHz 4 : 4.GHz 9 : 9.GHz 18 : 1.8GHz Specifications Part Number HDH-83GHD HDH-3GH(4) HDH-3GHD HDH-173CH(4) HDH-173CHD Frequency Range (GHz).5 1. 1.. 1.. 1.5 1.9 1.5 1.9 Coupling (db) 3 +. 3 +. 3 +. 3 +. 3 +. C : From 1% to below % D : From % to below % G : From 3% to below 35% 6 Form H : H Type 7 D : With Termination 8, (4) : RoHS Compliant Frequency Sensitivity ±.5 ±.5 ±.5 ±.3 ±.3 Directivity (db Min) Primary Line V.S.W.R. (Max) Secondary Line V.S.W.R. (Max) Weight (g) 49 Power (W) 5 5 HDH-3DHD(4) 1.7.3 3 +. ±.3 HDH-33GHD. 4. 3 +. ±.5 5 HDH-43BH(4) 3.7 4. 3 +. ±.3 3 5 HDH-93GHD(4) 8. 11. 3 +.3 ±.5 1.3 1.3 31 HDH-183CHD 1.5 14.5 3 +.6 ±.5 1 1.4 1.4 31 Directivity have had the coupling (nominal value of 3 db) subtracted. There is a phase difference of 9 between the output and the coupling.

Couplers with Connectors (I Type) Nov. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. 1.Vibration.Shock HDH Series Product Specifications Ratings HDH-81GID HDH-3GID HDH-186CID Frequency range (Note) Characteristic impedance Maximum Input Power (Note) Note : The frequency range and the maximum input power will differ depending on the products. Features 1.High Performance The high frequency characteristics feature. Extremely high degree of matching, and high isolation..miniature and Lightweight Corrosion-resistant aluminum is used for the case and the Hirose Electric original pattern design, which uses a stripline triplate method, enables the couplers to be miniature and lightweight. 3.Couplers with SMA Connectors Use of SMA connectors (Hirose Electric HRM Series) which feature stainless steel for the exterior cladding make these couplers durable. 4.Full Coupling Variations Full variations of coupling over 6 db are available. Frequency of 1 to Hz, overall amplitude of 1.5mm, acceleration of 98m/s for hours in each of 3 directions Acceleration of 98m/s, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature : _55ç +ç to +35ç +85ç +ç to +35ç 3.Temperature cycle No damage, cracks, or parts dislocation Time : 3 max. 3 max. (Minutes) 5 cycles The test method conforms to MIL-STD-. HDH-1GID HDH-91GID.5 to 14.5GHz 5ø 4 to 5 W Operating temperature range Operating relative humidity Item Standard Conditions No electrical discontinuity of 1μs or more No damage, cracks, or parts dislocation -1ç to +65ç 95% Max. Materials / Finish Part Material Finish Connector Body Stainless steel Passivated Connector female contacts Beryllium copper Gold plating Connector Insulator PTFE --------- Case Aluminum Coating Board Dielectric Gold plating

HDH Series Couplers with Connectors (I Type) Nov. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. HD H - 8 1 G I D 1 3 4 5 6 7 8 1 Series Name : HD (Directional Couplers) Type of Connector H : Indicates the HRM (SMA) Series 3 Center Frequency 8 :.8GHz 9 :.9GHz : 1.5GHz 17 : 1.7GHz 3 : 3.GHz 9 : 9.GHz 18 : 1.8GHz Specifications Part Number HDH-81GID HDH-8GID HDH-1GID HDH-GID HDH-176CID(4) HDH-171CID(4) HDH-17CID(4) HDH-173CID(4) HDH-31GID HDH-3GID HDH-91GID Frequency Range (GHz).5~1..5~1. 1.~. 1.~. 1.5~1.9 1.5~1.9 1.5~1.9 1.5~1.9.~4..~4. 8.~11. Coupling (db) 1±1. ±1. 1±1. ±1. 6±1. 1±1. ±1. 3±1.5 1±1. ±1. 1±1. 4 Coupling 6 : 6dB 1 : 1dB : db 3 : 3dB 37 : 37dB 49 : 49dB 5 Frequency Relative Bandwidth C : From 1% to below % G : From 3% to below 35% 6 Form I : I Type, H : H Type 7 D : With Termination Isolation port with termination is designated as D at the end of each part No. 8, (4) : RoHS Compliant Frequency Sensitivity (db) ±.75 ±.75 ±.75 ±.75 ±.3 ±.3 ±.4 ±.4 ±.75 ±.75 ±.75 Insertion Loss (db MAX).3.3.4.4.4.4.4.4.5.5.5 Directivity (db MIN) Primary Line V.S.W.R. (MAX) 1.3 Secondary Line V.S.W.R. (MAX) 1.3 Weight (g) 49 5 5 5 4 Power (W) 1 5 1 5 5 1 5 5 1 5 1 HDH-9GID 8.~11. ±. ±.75.5 13 1.3 1.3 4 1 HDH-186CID 1.5~14.5 6±1. ±.5.1 π 1.3 1.35 8 4 HDH-181CID(4) 1.5~14.5 1±1.5 ±.5 1.1 π 1.3 1.35 8 1 HDH-18CID 1.5~14.5 ±1.5 ±.5.6 1.3 1.35 The coupling loss component is not included in the insertion loss (unless the item is marked with an π symbol) 8 5 19