BAR64V-5W R PIN Diodes - Dual, Common Cathode in SOT-323 DESIGN SUPPORT TOOLS click logo to get started Models Available DESCRIPTION Characterized by low reverse capacitance the PIN diodes BAR64V-5W was designed for R signal switching and tuning. As a function of the forward bias current the forward resistance (R) can be adjusted over a wide range. A long carrier life time offers low signal distortion for signals over 1 MHz up to 3 GHz. Typical applications for these PIN diodes are switches and attenuators in wireless, mobile, and TV-systems. 3 1 2 EATURES High voltage current controlled R resistor Small diode capacitance Low series inductance Low forward resistance Improved performance due to two separate dice Base P/N-E3 - RoHS-compliant, commercial grade Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS or frequencies up to 3 GHz R-signal tuning Signal attenuator and switches Mobile, wireless, and TV-applications MECHANICAL DATA Case: SOT-323 Weight: approx. 5.7 mg Packaging codes/options: 18/1K per 13" reel (8 mm tape), 1K/box 8/3K per 7" reel (8 mm tape), 15K/box PARTS TABLE PART ORDERING CODE TYPE MARKING CIRCUIT CONIGURATION REMARKS BAR64V-5W BAR64V-5W-E3-8 or BAR64V-5W-E3-18 DW5 Common cathode Tape and reel ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) PART TEST CONDITION SYMBOL VALUE UNIT Reverse voltage V R 1 V orward continuous current 1 ma THERMAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Junction temperature T j 15 C Storage temperature range T stg -55 to +15 C Operating temperature range T op -55 to +125 C Rev. 1.6, 27-Apr-17 1 Document Number: 81836 or technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com ARE SUBJECT TO SPECIIC DISCLAIMERS, SET ORTH AT www.vishay.com/doc?91
f www.vishay.com BAR64V-5W ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT orward voltage = 5 ma V 1.1 V Reverse voltage = 1 μa V R 1 V Reverse current V R = 5 V I R.5 μa Diode capacitance f = 1 MHz, V R = V C D.5 p f = 1 MHz, V R = 1 V C D.37.5 p f = 1 MHz, V R = 2 V C D.23.35 p f = 1 MHz, = 1 ma r f 1 2 Differential forward resistance f = 1 MHz, = 1 ma r f 2 3.8 f = 1 MHz, = 1 ma r f.8 1.35 Charge carrier lifetime = 1 ma, I R = 6 ma, i R = 3 ma t rr 1.8 μs Series inductance L S 1 nh TYPICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) 1. 1. r - orward Resistance (Ω) 1. 1. f = 1 MHz.1.1 1 1 1 18342 I - orward Current (ma) ig. 1 - orward Resistance vs. orward Current I - orward Current (ma) 18326 1. 1..1.1.5.6.7.8.9 1. V - orward Voltage (V) ig. 3 - orward Current vs. orward Voltage C - Diode Capacitance (p) D.5.45.4.35.3.25.2.15.1.5. 4 8 f = 1 MHz 12 18334 V - Reverse Voltage (V) R 16 2 24 28 ig. 2 - Diode Capacitance vs. Reverse Voltage I - orward Current (ma) 12 1 8 6 4 2-2 - 4-6 = 1 ma I R = 6 ma i R = 3 ma - 8-5 5 15 25 35 18338 t rr - Reverse Recovery Time (ns) ig. 4 - Typical Charge Recovery Curve Rev. 1.6, 27-Apr-17 2 Document Number: 81836 or technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com ARE SUBJECT TO SPECIIC DISCLAIMERS, SET ORTH AT www.vishay.com/doc?91
BAR64V-5W S 21 ² - Insertion Loss (db) -.5-1 - 1.5-2 - 2.5 = 3mA = 1 ma =.5 ma = 1 ma = 1 ma - 3 2127.5 1 1.5 2 2.5 3 3.5 f - requency (GHz) ig. 5 - Insertion Loss of One Diode Inserted in Series with 5 Strip Line S 12 ² - Isolation (db) S 21 ² = - 5-1 - 15-2 V R =, diode zero-biased - 25.5 1 1.5 2 2.5 3 3.5 2128 f - requency ( GHz ) ig. 6 - Isolation of One Diode Inserted in Series with 5 Strip Line I P2 - Second Order Intercept Point (dbm) 15 1 5 2129 f = 1.8 GHz f =.9 GHz.1 1 1 - orward Current (ma) ig. 7 - Second Order Intercept Point for One Diode Inserted in 5 Strip Line Rev. 1.6, 27-Apr-17 3 Document Number: 81836 or technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com ARE SUBJECT TO SPECIIC DISCLAIMERS, SET ORTH AT www.vishay.com/doc?91
BAR64V-5W PACKAGE DIMENSIONS in millimeters (inches): SOT-323 1. (.39).8 (.31) 2.2 (.87) 2. (.79).1 (.4). (.) foot print recommendation:.6 (.24).8 (.31).15 (.6).8 (.3) 1.1 (.43).8 (.31).46 (.18).26 (.1) 8.4 (.16).2 (.8).525 (.21) ref. 2.45 (.96) 2.15 (.85).65 (.26) typ 1.35 (.53) 1.15 (.45) 1.4 (.55) 1.2 (.47) Document no.: 6.541-54.2-4 Rev. 1 - Date: 6. April 21.65 (.26) 1.8 (.71) 21113 1.3 (.51) Rev. 1.6, 27-Apr-17 4 Document Number: 81836 or technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com ARE SUBJECT TO SPECIIC DISCLAIMERS, SET ORTH AT www.vishay.com/doc?91
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, UNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 217 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 8-eb-17 1 Document Number: 91