LIGHT EMITTING DIODE SPECIFICATION DESCRIPTION: XT1-5630BXRY-DN REVISION: V1.0 ISSUE DATE: 2014/03/26 1 / 17
Revision Note Date Revision Page Vision 2014/03/26 Initiate Document 1~17 V1.0 2 / 17
Lighting LED Specification XT1-5630BXRY-DN White LED Specification Features Feature of the device: Small package with high efficiency Typical view angle: 120 Soldering methods: SMT Grouping parameter: Brightness, Forward Voltage and Chromaticity. The product itself will remain within RoHS compliant version. Applications LED Bulb application Plate lighting source Panel Light luminaire Indicator & in-direct lighting Retrofit applications Materials Items Description Housing Encapsulating Resin Electrodes Die attach Chip Heat resistant polymer Silicone resin Ag plating copper alloy Thermal conductive paste InGaN 3 / 17
Dimensions 1. Dimensions are in millimeters. 2. Tolerances for fixed dimensions are ± 0.2mm. 4 / 17
Product Nomenclature XT1-5630 BXRY-DN 1 2 3 4 Where: Group 1(XT1): Group 2(5630): LumenMax PLCC 1 Chip Type Package size 5.7mm x 3.0mm Group 3(B XR Y): CR-Cool white /CRI 80 UP NR-Natural white /CRI 80 UP WR-Warm white /CRI 80 UP Group 4(DN): Operating current 150mA, no zener chip 5 / 17
Absolute Maximum Ratings (T A =25 ) Parameter Symbol Rating Unit DC Forward Current (1) I FD 180 ma Pulse Forward Current (tp 10ms,Duty cycle=1/10) I FP 450 ma Reverse Voltage V R 5 V Reverse Current I R 10 ua ESD Sensitivity (HBM) VB 2,000 V LED Junction Temperature T j 125 Operation Temperature T opr -40~80 Storage Temperature T stg -40~80 Thermal resistance R th 20 /W 1. The solder pad temperature must be lower 80 C. (Ts<80 C) 6 / 17
Electrical-Optical Characteristics For Individual LED (T A =25 ) Parameter Symbol Color Bin Min Max Unit Condition 45 45 50 50 50 55 Cool White 55 55 60 60 60 65 65 65 70 70 70 75 45 45 50 50 50 55 Brightness (1) Ф v Natural white 55 55 60 60 60 65 lm I F =150mA 65 65 70 70 70 75 45 45 50 50 50 55 Warm white 55 55 60 60 60 65 65 65 70 Color rendering Index (2) CRI ALL R 80 -- % 1. Luminous intensity is measured with the accuracy of ± 10%. 2. CRI measurement tolerance is ± 3,for porduct nomenclature group 3. Parameter Symbol Bin Min Max Unit Condition VA1 2.8 2.9 VB1 2.9 3.0 Forward Voltage (1) V F VC1 3.0 3.1 VA2 3.1 3.2 V I F =150mA VB2 3.2 3.3 VC2 3.3 3.4 1. Forward Voltage measurement tolerance is ± 0.1V. 7 / 17
Relative Luminous Intensity Typical Electro-Optical Characteristics Curves Relative Spectrum Distribution IF=150mA, T Ambient =25 Forward Voltage vs Forward Current T Ambient =25 Luminous Relatie Intensity vs Forward Current, T Ambient =25 Typical Representative Spatial Radiation Pattern 1.0 0.9 0.8 0.7 0.6 0.5 1. 2θ 1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value. 2. View angle tolerance is ± 5 0.4 0.3 0.2 0.1 0.0-80 -60-40 -20 0 20 40 60 80 Degree (2 ) 8 / 17
Chromaticity Coordinate Groups Cool White Item 653 573 503 Central CIE(X,Y) (0.3123,0.3282) (0.3287,0.3417) (0.3447,0.3553) g11 861420.06 685517.43 568565.16 g12-403541.97-313869.29-255223.95 g22 447703.09 349209.02 282817.63 1. 653 573 503 Macadam ellipse 3step,tolerance: ± 0.5 step. 2. 65/STUV 57/STUV 50/STUV Macadam ellipse 5step,tolerance: ± 0.5 step. 9 / 17
Cool White 7050K 0.2962 0.3220 0.2984 0.3133 0.2984 0.3133 0.3037 0.2937 70Y 0.2937 0.3312 0.2962 0.3220 0.3048 0.3207 0.3009 0.3042 70C 70D 70Z 0.3005 0.3415 0.3028 0.3304 0.3068 0.3113 0.3068 0.3113 0.3028 0.3304 0.3048 0.3207 0.3009 0.3042 0.3093 0.2993 6500K 0.3005 0.3415 0.3115 0.3391 0.3130 0.3290 0.3068 0.3113 65X 0.3099 0.3509 0.3028 0.3304 0.3048 0.3207 0.3144 0.3186 65B 65A 65W 0.3115 0.3391 0.3048 0.3207 0.3068 0.3113 0.3161 0.3059 0.3028 0.3304 0.3130 0.3290 0.3144 0.3186 0.3093 0.2993 0.3099 0.3509 0.3205 0.3481 0.3213 0.3373 0.3144 0.3186 65Y 0.3196 0.3602 0.3115 0.3391 0.3130 0.3290 0.3221 0.3261 65C 65D 65Z 0.3205 0.3481 0.3130 0.3290 0.3144 0.3186 0.3231 0.3120 0.3115 0.3391 0.3213 0.3373 0.3221 0.3261 0.3161 0.3059 5700K 0.3196 0.3602 0.3290 0.3538 0.3290 0.3417 0.3222 0.3243 57X 0.3290 0.3690 0.3207 0.3462 0.3215 0.3350 0.3290 0.3300 57B 57A 57W 0.3290 0.3538 0.3215 0.3350 0.3222 0.3243 0.3290 0.3180 0.3207 0.3462 0.3290 0.3417 0.3290 0.3300 0.3231 0.3120 0.3290 0.3690 0.3376 0.3616 0.3371 0.3490 0.3290 0.3300 57Y 0.3381 0.3762 0.3290 0.3538 0.3290 0.3417 0.3366 0.3369 57C 57D 57Z 0.3376 0.3616 0.3290 0.3417 0.3290 0.3300 0.3361 0.3245 0.3290 0.3538 0.3371 0.3490 0.3366 0.3369 0.3290 0.3180 10 / 17
5000K 50X 50Y 0.3381 0.3762 0.3463 0.3687 0.3451 0.3554 0.3366 0.3369 0.3480 0.3840 0.3376 0.3616 0.3371 0.3490 0.3440 0.3427 50B 50A 50W 0.3463 0.3687 0.3371 0.3490 0.3366 0.3369 0.3429 0.3307 0.3376 0.3616 0.3451 0.3554 0.3440 0.3427 0.3361 0.3245 0.3480 0.3840 0.3551 0.3760 0.3533 0.3620 0.3440 0.3427 0.3571 0.3907 0.3463 0.3687 0.3451 0.3554 0.3515 0.3487 50C 50D 50Z 0.3551 0.3760 0.3451 0.3554 0.3440 0.3427 0.3495 0.3339 0.3463 0.3687 0.3533 0.3620 0.3515 0.3487 0.3429 0.3307 1. CIE-X Y measure tolerance: ± 0.01 11 / 17
Neutral White Item 403 Central CIE(X,Y) (0.3818,0.3797) g11 397654.92 g12-216967.62 g22 261335.09 1. 403 Macadam ellipse 3step,tolerance: ± 0.5 step 2. 40/STUV Macadam ellipse 5step,tolerance: ± 0.5 step 12 / 17
Neutral White 4500K 0.3571 0.3907 0.3642 0.3805 0.3617 0.3663 0.3512 0.3465 45X 0.3668 0.3957 0.3548 0.3736 0.353 0.3601 0.359 0.3521 45B 45A 45W 0.3641 0.3804 0.353 0.3601 0.3512 0.3465 0.3567 0.3389 0.3548 0.3736 0.3617 0.3663 0.3591 0.3522 0.3495 0.3339 0.3668 0.3957 0.3736 0.3874 0.3703 0.3726 0.359 0.3521 45Y 0.3771 0.4034 0.3642 0.3805 0.3617 0.3663 0.367 0.3578 45C 45D 45Z 0.3736 0.3874 0.3617 0.3663 0.3591 0.3522 0.364 0.344 0.3641 0.3804 0.3703 0.3726 0.367 0.3578 0.3567 0.3389 4000K 0.3771 0.4034 0.3871 0.3959 0.3828 0.3803 0.367 0.3578 40X 0.3736 0.3874 0.3736 0.3874 0.3702 0.3722 0.364 0.344 40B 40A 40W 0.3871 0.3959 0.3702 0.3722 0.367 0.3578 0.374 0.3491 0.3914 0.4115 0.3828 0.3803 0.3784 0.3647 0.3784 0.3647 0.3914 0.4115 0.4006 0.4044 0.395 0.3875 0.3784 0.3647 40Y 0.3871 0.3959 0.3871 0.3959 0.3828 0.3803 0.374 0.3491 40C 40D 40Z 0.4006 0.4044 0.3828 0.3803 0.3784 0.3647 0.3844 0.3552 0.406 0.4208 0.395 0.3875 0.3898 0.3716 0.3898 0.3716 1. CIE-X Y measure tolerance: ± 0.01 13 / 17
Warm White Item 353 303 273 Central CIE(X,Y) (0.4073,0.3917) (0.4338,0.4030) (0.4578,0.4101) g11 379866.58 393221.38 379464.72 g12-199896.34-197225.33-177980.07 g22 249966.07 276828.94 267913.57 1. 353 303 273 Macadam ellipse 3step,tolerance: ± 0.5 step 2. 35/STUV 30/STUV 27/STUV Macadam ellipse 5step,tolerance: ± 0.5 step 14 / 17
Warm White 3500K 0.4083 0.3921 0.4148 0.409 0.4299 0.4165 0.4223 0.399 35A 0.3941 0.3848 0.3996 0.4015 0.4148 0.409 0.4083 0.3921 35B 35C 35D 0.3889 0.369 0.3941 0.3848 0.4083 0.3921 0.4018 0.3752 0.4018 0.3752 0.4083 0.3921 0.4223 0.399 0.4147 0.3814 3000K 0.4345 0.4033 0.4431 0.4213 0.4562 0.426 0.4468 0.4077 30A 0.4223 0.399 0.4299 0.4165 0.4431 0.4213 0.4345 0.4033 30B 30C 30D 0.4147 0.3814 0.4223 0.399 0.4345 0.4033 0.426 0.3854 0.426 0.3854 0.4345 0.4033 0.4468 0.4077 0.4373 0.3893 2700K 0.4578 0.4101 0.4687 0.4289 0.4813 0.4319 0.4703 0.4132 27A 0.4468 0.4077 0.4562 0.426 0.4687 0.4289 0.4578 0.4101 27B 27C 27D 0.4373 0.3893 0.4468 0.4077 0.4578 0.4101 0.4483 0.3919 0.4483 0.3919 0.4578 0.4101 0.4703 0.4132 0.4593 0.3944 1. CIE-X Y measure tolerance: ± 0.01 15 / 17
Carrier Tape Dimensions: Standard loaded quantity 3000pcs per reel Reel Specification 16 / 17
Reflow Soldering Recommend tin glue specifications: Melting temperature: 150~260 Contains: Sn96.5%,Ag3.0%,Cu 0.5% JIS Z 3282 TEST Never take next process until the component is cooled down to room temperature after reflow The recommended reflow soldering profile (measuring on the surface of the LED resin) is following Cleaning The conditions of cleaning after soldering: An alcohol-based solvent such as Isopropyl Alcohol (IPA) is recommended. Temperature Time :< 50 30sec, or <30 3min Ultra sonic cleaning :< 15W/bath volume: 1 liter max Curing: 100 max,<3min Cautions of Pick and Place It should be avoided to load stress on the resin during high temperature. Avoid rubbing or scraping the resin by any object. Electric-static may cause damage to the component. Please confirm that the equipment is grounding well. Using an ionizer fan is recommended. Cautions of Design and Applications It should be done to connect with a current-limiting serial resistor. Avoid to drive reverse voltage over the specifications on LED when ON/OFF Any application should refer to the specifications of absolute maximum ratings. The dimensions of the recommended soldering pattern may not meet every user. Please confirm and study first before designing the soldering pattern in order to obtain the best performance of soldering. Do not contact with any component on the assembly board. 17 / 17