Datasheet ACT0M Signal Isolation and Conversion NEW High quality signal isolation and conversion in a slim wide housing format is now available with Weidmuller s ACT0M range. Featuring worldwide approvals for both standard and hazardous area installations, this series of eight single- and dual-channel models extends Weidmuller s signal conditioning portfolio with a package of solutions for industrial process measurement and control applications. ACT0M is designed to reduce the time and cost of building control panels. DIN-rail mounted in Weidmuller s new -pole housing, module power can be distributed through the rail for minimized power wiring and reduced installation costs. This Power Rail provides the flexibility to add or remove individual modules quickly and easily without affecting the wiring or operation of other components on the rail. The ACT0M range offers two-channel loop-powered isolation, signal splitting with power provided for the transmitter, or universal input conversion in a wide module without compromising performance. In addition, configuration is simple because the ACT0M modules require no calibration. Models with selectable voltage and current ranges feature DIP switches. For the Universal input model, Weidmuller provides vendor-independent, FDT-based configuration software available for download from the Weidmuller website. Features: Very high density analog signal isolation and conversion Easy installation with Power Rail cross-connect option DIP switches for calibration-free re-ranging Universal input model uses FDT configuration software (and CBX00 interface) CE, culus, cfmus Class Div. and Class Zone ATEX, IECEx Zone, DNV, GL approvals Ambient temperature range typically - F to F (- C to 0 C) Weidmuller, Canada 0 Spy Court Markham, Ontario LR H Telephone: (00) -00 Facsimile: () 00- Email: info@weidmuller.ca Website: www.weidmuller.ca Weidmuller, Mexico Blvd. Hermanos Serdán 9 Col. San Rafael Oriente Puebla, Puebla, Mexico C.P. 09 Telephone: 0 Facsimile: 0 9 Email: clientes@weidmuller.com.mx Website: www.weidmuller.com.mx Weidmuller, United States Southlake Blvd. Richmond, Virginia Telephone: (00) 9-9 Facsimile: (0) 9-9 Email: info@weidmuller.com Website: www.weidmuller.com
Signal Isolation and Conversion ACT0M Universal input converter ACT0M-UI-AO-S Isolating and converting of temperature signals and DC signals Configuration using FDT/DTM software Optional power supply via the DIN-rail-bus way isolation, R IN OUT Sensor Potentiometer/Resistance current voltage Sensor supply voltage voltage Thermocouples: B, E, J, K, L, LR, N, R, S, T, U, W, W RTD: PT00, PT000, Ni0, Ni00, Ni000 // conductor 0 Ω 0 k Ω 0/...0 ma 0/...0 V < Ω > 00 k Ω > V DC at 0 ma 0/ 0 ma 0/ 0 V < 00 Ω > 0 k Ω V DC ± 0 % 0. W ( V supply / Passive input / 0 ma input & output / 00 Ω load) - C +0 C -0 C + C < 0. % span (DC, RTD) < 0. % + CJ error (TC) < 0.0 % /K. kv 00 V culus 00-, cfmus Div., ATEX zone, IECEx Zone, DNV, GL Clamping range (nominal / min. / max.). x. x.. / 0. /. ACT0M-UI-AO-S 00000 USB interface MF /. MC NEUTRAL 0000 CBX00 USB 90000
Signal splitter Isolating, converting and splitting DC signals Configured using DIP switch Optional power supply via the DIN-rail bus way isolation ACT0M-CI-CO-S ACT0M-AI-AO-S I IN I OUT IN OUT I OUT OUT current voltage Sensor supply voltage voltage Cut-off-frequency 0/ 0 ma < Ω 0/ 0 ma < 00 Ω / channel V DC ± 0 % 0. W ( V supply / Passive input / 0 ma input & output / 00 Ω load) - C +0 C -0 C + C < 0.0 % of measurement range < 0.0 % /K 00 Hz. kv 00 V culus 00-, cfmus Div., ATEX zone, IECEx Zone, DNV, GL 0/ 0 ma 0/ 0 V 0/ V < Ω > 00 k Ω > V DC at 0 ma 0/ 0 ma 0/ 0 V 0/ V < 00 Ω / channel > 0k Ω / channel V DC ± 0 % 0.W ( V supply / Passive input / 0 ma input & output / 00 Ω load) - C +0 C -0 C + C < 0.0 % of measurement range < 0.0 % /K 00 Hz. kv 00 V culus 00-, cfmus Div., ATEX zone, IECEx Zone, DNV, GL Clamping range (nominal / min. / max.). x. x.. / 0. /.. x. x.. / 0. /. ACT0M-CI-CO-S 990000 ACT0M-AI-AO-S 00000 MF /. MC NEUTRAL 0000 MF /. MC NEUTRAL 0000
Signal Isolation and Conversion ACT0M Converters for DC ma and Volts Isolating and converting DC signals DIP switch for range changes without re-calibration Optional power supply via the DIN-rail-bus way isolation Choice of active or passive ma input ( E model is passive only) ACT0M-AI-AO-S ACT0M-AI-AO-E-S IN OUT IN OUT current voltage Sensor supply voltage voltage Cut-off-frequency 0/ 0 ma 0/ 0 V 0/ V < Ω > 00 k Ω > V DC at 0 ma 0/ 0 ma 0/ 0 V 0/ V < 00 Ω > 0 k Ω V DC ± 0 % 0. W ( V supply / Passive input / 0 ma input & output / 00 Ω load) - C +0 C -0 C + C < 0.0 % of measurement range < 0.0 % /K 00 Hz. kv 00 V culus 00-, cfmus Div., ATEX zone, IECEx Zone, DNV, GL 0/ 0 ma 0/ 0 V 0/ V < Ω > 00 k Ω 0/ 0 ma 0/ 0 V 0/ V < 00 Ω > 0 k Ω V DC ± 0 % 0. W ( V supply / Passive input / 0 ma input & output / 00 Ω load) 0 C +0 C -0 C + C < 0. % of measurement range < 0.0 % /K 00 Hz. kv 00 V culus 00-, DNV, GL Clamping range (nominal / min. / max.). x. x.. / 0. /. ACT0M-AI-AO-S 000000. x. x.. / 0. /. ACT0M-AI-AO-E-S 00000 MF /. MC NEUTRAL 0000 MF /. MC NEUTRAL 0000
ACT0M Signal Isolation and Conversion ILP and OLP isolators Isolation of DC ma signals Takes power from the input loop (ILP) or output loop (OLP) Available as either single-channel or double-channel version way isolation ACT0M-CI-CO-ILP-S ACT0M-CI-CO-OLP-S I IN I OUT I IN I OUT I IN I OUT I IN I OUT current Voltage drop Cut-off-frequency 0/ 0 ma. V 0/ 0 ma < 00 Ω 0 mw per channel - from input loop - C +0 C -0 C + C < 0. % of measurement range < 0.0 % /K 00 Hz. kv 00 V culus 00-, cfmus Div., ATEX zone, IECEx Zone, DNV, GL 0/ 0 ma < Ω - 0 ma < 00 Ω mw per channel - from output loop - C +0 C -0 C + C < 0. % of measurement range < 0.0 % /K 00 Hz. kv 00 V culus 00-, cfmus Div., ATEX zone, IECEx Zone, DNV, GL Clamping range (nominal / min. / max.). x. x.. / 0. /.. x. x.. / 0. /. Single-channel version ACT0M CI-CO-ILP-S 00000 ACT0M- CI-CO-OLP-S 00000 Double-channel version ACT0M CI-CO-ILP-S 00000 ACT0M-CI-CO-OLP-S 00000 MF /. MC NEUTRAL 0000 MF /. MC NEUTRAL 0000
Signal Isolation and Conversion ACT0M DC isolator ACT0M-CI-CO-S Isolating DC signals Optional power supply via the DIN-rail-bus way isolation I IN I OUT current voltage Cut-off-frequency 0/ 0 ma < Ω 0/ 0 ma < 00 Ω V DC ± 0 % 0. W ( V supply / Passive input / 0 ma input & output / 00 Ω load) - C +0 C -0 C + C < 0.0 % of measurement range < 0.0 % span/k 00 Hz. kv 00 V culus 00-, cfmus Div., ATEX zone, IECEx Zone, DNV, GL Clamping range (nominal / min. / max.). x. x.. / 0. /. ² ACT0M-CI-CO-S 90000 MF /. MC NEUTRAL 0000
ACT0M Signal Isolation and Conversion Rail bus accessories Preliminary product data! CH0M BUS-PROFIL TSx./000 Support section for bus PCB CH0M BUS-PROFIL TSx/000 Support section for bus PCB CH0M BUS.0/0 AU/000 Bus PCB Support section for TS x. Length: 0, 00 or 0 Support section for TS x Length: 0, 00 or 0 Bus PCB for use on TS x. and TS x Length: 0, 00 or 0 Five conductor paths, gold plated Electrical rating: V AC, A/conductor path CH0M BUS-PROFIL TSx./0 0 0000 CH0M BUS-PROFIL TSx./00 0 0000 CH0M BUS-PROFIL TSx./0 0000 CH0M BUS-PROFIL TSx/0 0000 CH0M BUS-PROFIL TSx/00 90000 CH0M BUS-PROFIL TSx/0 0000 CH0M BUS.0/0 AU/0 0 0000 CH0M BUS.0/0 AU/00 0 0000 CH0M BUS.0/0 AU/0 0000 CH0M BUS-ADP TS/000 Cover plate CH0M BUS-AP LI TSx. & End plate CH0M BUS-AP RE TSx. & End plate Cover plate for rail bus Length: 0, 00 or 0 End plate for rail bus Fits on TS x. and TS x Left End plate for rail bus Fits on TS x. and TS x Right CH0M BUS-ADP TS/0 0 0000 CH0M BUS-ADP TS/00 0 0000 CH0M BUS-ADP TS/0 0000 CH0M BUS-AP LI TSx. & 0 90000 CH0M BUS-AP RE TSx. & 0 90000
Signal Isolation and Conversion ACT0M ACT0 power feed module Distributes the voltage supply on the busbar Compatible with Weidmuller s CH0 rail bus Optional backup supply connection Approved for installation in Ex Zone /Div. Monitors the supply voltage Alarm alerts via the status relay ACT0-Feed-In-PRO-S ACT0-FEED-IN-BASIC-S Alarm Power supply, 0 V Power supply, + V Backup, + V Backup, 0 V Status relay, N.C. Status relay, shared Status relay, N.O. Power supply, + V Power supply, 0 V 0 V + V Status 0 V + V Power supply Max. input current Backup power supply Trigger level for the power supply, power supply voltage power, status relay in safe zone Max. voltage Max. current Max. AC power Efficiency degree Ambient temperature Protection degree Weight Humidity... V DC A... V DC Fault < V DC voltage -0. V DC @ A max. 9 W max. A 0 AC / 0 V DC A AC / A DC 00 VA / 0 W > 9.9 % -0...+0 C -0...+ C < W IP0 0 g < 9 %, no condensation culus, culus EX, ATEX, IECEx Zone, DNV*, GOST*, CE... V DC.A = U input = P input = I input 00 % -...+0 C -0...+ C < W IP0 0 g < 9 %, no condensation culus, ATEX, IECEx Zone, GL, DNV, CE Clamping range (nominal / min. / max.) Screw connection. / 0. /. 9. /. /. * applied for Screw connection. / 0. /.. /. /. ACT0-Feed-In-PRO-S 900000 ACT0-FEED-IN-BASIC-S 900000 Subject to technical changes 0/-LITE