LV-1800 LASER DOPPLER VIBROMETER INSTRUCTION MANUAL ONO SOKKI CO., LTD.
Warranty 1. This product is covered by a warranty for a period of one year from the date of purchase. 2. This warranty covers free-of-charge repair for defects judged to be the responsibility of the manufacturer, i.e., defects occurred while the product is used under normal operating conditions according to descriptions in this manual and notices on the unit label. 3. For free-of-charge repair, contact either your sales representative or our sales office nearby. 4. The following failures will be handled on a fee basis even during the warranty period. (a) Failures occurring through misuse, mis-operation, or modification (b) Failures occurring through mishandling (dropping) or transportation (c) Failures occurring through natural calamities (fires, earthquakes, flooding, and lightening), environmental disruption, or abnormal voltage. * For repairs after the warranty period expired, contact your sales representative or our sales office nearby. 1. This document may not be reproduced, in whole or part, in any form or by any means without the prior written permission of the publisher. 2. The contents of this document are subject to change without notice. 3. This document has been produced based on a series of strict verifications and inspections. Should a failure occur nonetheless, please inform our sales representative or sales office. 4. Ono Sokki shall have no liability for any effect resulting from any operation, whether or not the effect is attributable to a defect in the documentation. Copyright ONO SOKKI CO., LTD. 2012 All rights reserved.
LASER RADIATION DO NOT STARE INTO BEAM 1mW MAX. CW He-Ne 633nm CLASS 2 LASER PRODUCT IEC 60825-1:2007 CAUTION-LASER RADIATION WHEN OPEN CAUTION-LASER RADIATION WHEN OPEN
ON OFF
ON OFF
V
100~110 mm 250±60 mm 450±60 mm 650±60 mm 100 110 250 450 650
ON OFF
m
COARSE FINE 4 56 3 2 4 56 3 2 7 8 9 AB 1 0 1 0 C D E F 7 8 9 AB C D E F REMO MANU POWER MLEK-A080W1LR
COARSE 7 8 9 AB 4 56 C 3 D 2 E 1 0 F FINE 7 8 9 AB 4 56 C 3 D 2 E 1 0 F REMO MANU POWER MLEK-A080W1LR OUT MAINS supply EXT
MLEK-A080W1LR COARSE 7 8 9 AB FINE 4 56 3 2 4 56 3 2 1 1 0 0 F C D E 7 8 9 AB F C D E MAINS supply POWER REMO MANU OUT EXT MLEK-A080W1LR
COARSE FINE POWER 3 2 1 0 3 2 1 0 REMO F E C D C D E F MANU MLEK-A080W1LR 7 8 9 AB 4 56 7 8 9 AB 4 56
10 26 50 (4) 135.8 (24.4) 81.3 100 335.8 100
LASER RADIATION DO NOT STARE INTO BEAM 1mW MAX. CW He-Ne 633nm CLASS 2 LASER PRODUCT IEC 60825-1:2007 100~110 mm 250±60 mm 450±60 mm 650±60 mm 100 110 250 450 650
m
0.1 1 10 100 1000 10000 100000 1000000 10000000 0.1 1 10 100 1000 10000 100000 1000000 10000000
CLASS 2 LASER PRODUCT Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No.50 dated june 24 2007. ONO SOKKI CO., LTD. 1-16-1, Hakusan, Midori-ku, Yokohama, 226-8507, Japan Manufactured April 2012 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class A digital apparatus complies with Canada ICES-003. Cet appareil unmerique de la class A est comform a la nome NMB-003 du Canada.
*Outer appearance and specifications are subject to change without prior notice. HOME PAGE: http://www.onosokki.co.jp/english/english.htm WORLDWIDE ONO SOKKI CO., LTD. 1-16-1 Hakusan, Midori-ku, Yokohama 226-8507, Japan Phone : +81-45-935-3918 Fax : +81-45-930-1808 E-mail : overseas@onosokki.co.jp B00002335/IM12101901(2.0) 12X(MS)00X