TONGFENG FLEXIBLE CONDUIT TONGFENG FLEXIBLE CONDUIT

Similar documents
Page 1 of 5 Application Engineering Note Proc. 001 Interlock Armor and Corrugated Steel Tape Cables Pulling Grip Installation Procedure Rev.

Mineral-insulated resistance thermometers to EN

Cu 0.37 Brass Cu 0.37 Brass

FT-KV1SERIES FD-WL48

Times Microwave Systems Hermetically Sealed Assemblies

Thin Film Deposition

Light Guide Overview

International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS

MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz

STANDARD RTD's INDEX

Liquid Tight Conduit Connector With Internal Threads, Female Liquid Tight Conduit Fittings ( YCM )

Delikon Stainless Steel Liquidtight Connectors offer corrosion resistance and the strength of stainless steel for the highest levels of endurance.

Precision Thermistor Sensors

CONDUIT, FITTINGS & SADDLES

Techline Flat Cross Splice. Techline Yoke Clamps* Techline Gang Clamps* TECHLINE. *Yoke Clamps Are Available To Fit Any Width.

A Reference Guide. Continuous Hinge, Inventory and Service Worldwide Est End Play Design Engineering with Standard Continuous Hinges

CONTENTS CABLE MANAGEMENT AND

14 AWG 2 AWG: 600 Volt

EACON. Field mountable microwave cable. INEXIM Sp. z o.o. Edition Bezpośredni importer i dystrybutor

Optical Ground Wires (OPGW)

Thin Film Deposition

Precision glassware made by SCHOTT

ECOFLEX 10 Characteristics Diameter 10,2 mm. ECOFLEX 15 Characteristics Diameter 14,6 mm. AIRCOM PLUS Characteristics Diameter 10,3 mm

TECHNICAL DATA SHEET FOR Single Mode Optical Fibre Cable Direct Burial Application

Fiber Splice Box (FSB-D) Installation Instructions

Technical Manual. ETP-CLASSIC incl type R. Content

Golden Century Technology Co., Ltd

INTERMEDIATE METAL CONDUIT

Labs. Introduction. Specialty Family

CommScope Tool-less IDC Instruction Sheet Connector Block Issue 3, February 2004 Material ID

Special Thumb Screw Order Form

Heat Exchanger & Boiler Tube Inspection Techniques

RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].

Hyperboloid Contacts for High Performance Connectors

Low Voltage AIRGUARD. A proven, rugged product for harsh environments

CONTENTS. Introduction Characteristics Product range Pages

ORDER CODES 1-2(A) 1-3 R5T185L Single Platinum RTD Elements 1-2 Available Sheath Diameters 316SS 1-4 Length CODE TEMPERATURE

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter

Configure-to-Order probes

Installation Guidelines, 10Gig SFP+ Direct Attach Copper Cable Assembly PN533A

SECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)

Field Instrument Cable. Electrical Noise

CIR (Crush & Impact Resistant) VFD Power Cable

ORP100 Sensor. Edition 1.0. User Manual

Ground Clamps Cable Tray

AMPLIMITE Cable Connectors and Shielding Hardware Kits

.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71.

05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A75 RACO Floor Boxes

PO Box 1879, 515 Tucker Ave. Friday Harbor, WA Phone: (360) Fax: (360)

LV AIRGUARD. P r o ble m. ife? No S. a proven, rugged product for harsh environments

TECHNICAL DATA SHEET FOR Uni-tube Single Mode Optical Fibre Cable ARMORED. (SM 2~24 Fibers)

C-L-X ARMOR REMOVAL PROCEDURES

TIMES QUALIFIED MILTECH CABLE ASSEMBLIES

Fibre-optic units SOE4

Stainless Steel Flexible Water Connectors. Dependable. Durable. Professional.

Metallic Bearings. Oiles 500SP1 P.181 Oiles 500SP5 P.206. Oiles 500SPR P.207 Oiles 500HP P.209 Oiles 500B P.213

Y O U R W A Y ENGINEERING PRODUCTS. adritec.com

19. SHIELDED WINDOWS.

N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Annular, 1/2 inch Flexible, PE-1/2FAC. Cable Attachment Method (Shield/Contact)

MADE IN GERMANY INDUSTRIAL ENAMELLING DIES

MB-105 BENDER INSTRUCTION SET PRO-TOOLS 7616 INDUSTRIAL LANE TAMPA, FLORIDA PHONE FAX

kwiqmate Connectors Product Catalog Johnson

Cable Glands, Metal, for shielded EMC Cables CG.EM.*.*.*

Your Global Sales Partner

Order/Technical Support Tel: (800) / FAX: (800) /

NEER Zinc Cable and Conduit Connectors For Flexible Metal Conduit

How to make tailwheel shock rubber donuts and aluminum shims with formed flange

MI: (Secure this number someplace, for possible future need) SPECIFICATIONS:

(2) 12mm x 40mm Bolt Plate (long) pictured w/plastic retainer. (6) 12mm x 40mm Bolt Plate (short) Support Bracket Driver/left Front

isd dunaferr Product catalogue

SAC-3P- 5,0-PUR/M12FR SH

Cryogenic Coaxial Cables

PIPE/CONDUIT SUPPORTS

Better by Design. PVC Coated Conduit System. Technical Services Tel: Canada Tel: Fax:

Illustrated Catalog & Technical Manual

Essex County College - West Essex Campus Addition And Renovations dlb # / SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING

Tru products are now under the Tru-Win brand from Winchester Interconnect.

Clamp Pair. Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum

SHIELDED WINDOWS. General Description. Orientation. Shielding Test Data. Tolerances. 32 BOMBERG & CO. ApS Tlf Fax

Clamps. Preformed Clamping Systems. Clamps. Band-It. Band-It

TERMINATION & SPLICING OF SHIELDED PRODUCTS

Conduct-o-Seal Oriented Wire in Silicone Gasket Material

CABLES FOR MOTION CONTINUOUS-BENDING HI-FLEX ELECTRICAL CABLES TOTALTRAX TURN-KEY SYSTEMS PRE-ASSEMBLED CABLES STRAIN RELIEF DEVICES

Polished head, handles black atramentised. Polished head, dip-coated handles. Length mm

Cable Ties and Accessories

Product Art.no. Ø Wall thickness Meter per mm mm bundle

Torch Consumables. - air cooled torch systems - Power Joint Power Joint Lite Frontpull 8i Power Clutch Frontpull 7 Wire Select

Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5GHz

Ordering Guide - Shaft Assemblies -

HES HACILAR ELEKTRİK SANAYİ VE TİC.A.Ş.

CERAMICS PROCESSING. SURFACE ENGINEERING THROUGH DIAMOND EXPERTISE Grinding, Lapping and Honing

Instructions for Preparing AFL OPTICAL GROUND WIRE CABLE (ALUMACORE CABLE DESIGNS) FOR BPA

Simplex Baseboard System Baseboard System

GPPO Interconnect Series Product Information

Knitted Wire Mesh. Overview

LIERS P

SAC-5P- 1,5-PUR/M12FS SH

Gold plating, 140 Gases compressed, 393 liquid,393 Grounding, safety, 403

Rotary Encoder System Compact Model Range

INNOVATIONS. KNIPEX Siphon and Connector Pliers. Exclusively distributed by MADE IN GERMANY

Transcription:

TONGFENG FLEXIBLE CONDUIT TONGFENG FLEXIBLE CONDUIT 1

COMPANY BREIF INDRODUCTION TONGFENG Products --- Your Professional Electrical Wiring Protection Solutions. As an industrial leader, the company offers flexible stainless steel conduits for electrical wiring protections. (squarelocked or interlocked), very flexible *Corrosion Resistant *EMI Shielding *Most suitable for instrument wiring protection. We appreciate your business and hope that you find our website informative and efficient. (1)Flexible stainless steel conduit,for protection of instrument wirings (2)Small Bore Hose,Instrumentation hose,flexible stainless steel conduit (3)Small diameter Optical Fiber And Sensors Wirings Protection Flexible Metal Conduit (4)Flexible metal conduit, Optical Fiber Protection Flexible electrical conduit (5)small diameter flexible metal conduit,optical Fiber Wirings Protection Flexible electrical conduit (6) Flexible metal conduit,flexible stainless steel conduit (7)Flexible electrical conduit flexible stainless steel conduit 2

The Interlocked Tube's metal strip is fully interlocked. This offers superior tensile strenght and crush resistance while allowing full extension and compression without binding. The Interlocked Tube is designed to maintain a particular shape or bending condition which makes this tube ideal for application such as light guides or bundling optical fibers in medical equipment. Applications: - Optical fiber protection - Medical equipment - Light guides - Security cable armor Features: - Shape retaining - Great bending radius - High tensile strength and crush resistance Fully Inter locked conduit Inter locked conduit metal strip and the edges of the strip are completely interlocked with each other. This offers increase crush protection and higher axial strength. Trade Size Inner Diameter Outer Diameter Weight Bend Radius Part Nunber 5/32" 0.156" 0.235" 4mm 4.2mm 6.2mm 3/16" 0.1888" 0.266" 5mm 4.8mm 6.8mm 7/32" 0.218" 0.303" 5.5mm 5.5mm 7.7mm 1/4" 0.250" 0.329" 6mm 6.4mm 8.4mm 9/32" 0.282 0.375 7mm 7.2mm 9.0mm 3/8" 0.389 0.500 10mm 9.9mm 12.7mm 7/16" 0.432 0.547 11mm 11mm 13.9mm 1/2" 0.500" 0.610" 12.7mm 12.7mm 15.5mm 45g/m 50mm FI-SS-0025 80g/m 50mm FI-SS-003 110g/m 55mm FI-SS-0035 120g/m 55mm FI-SS-004 130g/m 45mm FI-SS-005 160g/m 50mm FI-SS-006 180g/m 50mm FI-SS-007 200g/m 65mm FI-SS-008 Marks: OD tolerance is +/- 0.008 inches (0.2mm) ID tolerance is +/- 0.015 inches (0.4mm) material: stainless steel 304 (standard),wall thickness: 0.20-0.25mm" Website: www.hose-china.com E-mail: TFconduit@gmail.com 3 3

Squar locked conduit The Square-Locked tube/ conduit is produced from a continues metal strip which is locked into position by one overlapping joint. The highly flexible tube provides excellent mechanical protection and will fully extend or compress without binding. This light-weight tube is non-kinking and can be bent to any angle with hardly any slack. Applications: - Communication equipment - Optical fiber and sensor cable - Medical equipment - Endoscopes / Boroscopes - Robotic systems - Fiber Scopes & light guides Features: - Light weight - High tensile strength - High crush resistance - Excellent bending Squar locked conduit is produced from a continues metal strip and is help in position by locking one leg of one profile over the leg of the adjacent profile Trade Size Inner Diameter Outer Diameter Weight Bend Radius Part Nunber 5/32" 0.156" 0.235" 4mm" 4.0mm 6.0mm 3/16" 0.1888" 0.266" 5mm 4.8mm 6.8mm 7/32" 0.218" "0.303" 5.5mm 5.6mm 7.7mm 1/4" 0.250" 0.329" 6mm 6.4mm 8.4mm 9/32" 0.282" 0.375" 7mm 7.2mm 9.3mm 5/16" 0.313 0.410" 8mm 8.0mm 10.5mm 3/8" 0.375" 0.500" 9.5mm 9.5mm 12.7mm 1/2" 0.500" 0.625" 12.7mm 12.7mm 15.9mm 3/4" 0.75" 0.91" 20mm 20mm 23mm 1" 9.843" 11.81" 25mm 25mm 30mm 45g/m 19mm SL-SS-0025 49g/m 24mm SL-SS-003 59g/m 25mm SL-SS-0035 61g/m 27mm SL-SS-004 72g/m 30mm SL-SS-0045 82g/m 31mm SL-SS-005 131g/m 32mm SL-SS-006 157g/m 31mm SL-SS-007 260g/m 70mm SL-SS-008 400g/m 80mm SL-SS-009 Marks: OD tolerance is +/- 0.008 inches (0.2mm) ID tolerance is +/- 0.015 inches (0.4mm) material: stainless steel 304 (standard),wall thickness: 0.20-0.25mm" 4 4 Website: www.hose-china.com E-mail: TFconduit@gmail.com

Materials: - Stainless steel (standard) - Copper - Aluminum Different color PVC sheathing is available standard quality Chemical polishing Offer tubes with Chemical polish, Extra shine for optical application. chemical polish Website: www.hose-china.com E-mail: TFconduit@gmail.com 5 5

optional connectors are available 6 Website: www.hose-china.com E-mail: TFconduit@gmail.com 6

Adhesion type connector Adhere on the tube to secure. Can be used for Interlock and square locked Features - For Terminal treatment. - Prevent damaging to Optical Fiber and cable - Outer diameter of the cap is small - Vibration resistance - Cost saving. Applications As sensors and cables protection in: - Measurement device - Sensor instruments - Robots - Parts in amusement equipments Material Nickel plated or brass or plastic Website: www.hose-china.com E-mail: TFconduit@gmail.com 7 7

CIXI TONGFENG FLEXIBLE CONDUIT CO., LTD Tel: 0086-574-6326 7415 Fax: 0086-574-6326 5982 Cell Phone: 0138 0582 2845 / 0139 6829 5227 Website: www.hose-china.com E-mail: TFconduit@gmail.com 8