Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Burnishing machine TRINOXFLEX Set BSE 4-3 00 Set 433.438 Power input 400 watt Power output 880 watt Max. tool Ø 25 Tool width 00 Tool fixture 9 No load speed 000-3500 rpm Cable length 4,0 m Weight 2,9 kg Standard equipment Burnishing machine TRINOXFLEX Set + Microprocessor control: speed selection, tachogenerator constant speed control, soft start, restart protection after power failure, overload protection and temperature monitoring + Unique tool attachment with quick-action coupling for tool-free changing of the system attachments for burnishing and pipe belt sanding + Variably adjustable burnishing attachment, allows working close up to the edge, also suitable for narrow rollers, incl. edge guide + Tool-free grinding tool change via a patented quick-change system + Completely cast electronic components prevents damage due to metal dust. The 3-fold winding protection reduces motor wear, increases service life + Adjustable guard: for sanding tools up to Ø 25 + Single-pole switch + Spindle lock + For optimum finishing of various materials, for burnishing, texturing, polishing, brushing, smoothing, de-rusting and deburring steel and stainless steel surfaces sanding attachment for burnishing BS 00 433.462 rubber air roller 433.896 air pump 256.284 fleece A 280/fine 256.975 sanding-polishing sleeve, S 600 436.429 sanding-polishing sleeve, S 500 436.437 MESHFLEX sanding sleeve 434.62 A 400 3 ZIRCOFLEX sanding sleeves P 80 3 pieces of 434.55 3 ZIRCOFLEX sanding sleeves P 20 3 pieces of 434.523 3 CERAFLEX sanding sleeves K 20 3 pieces of 434.566 3 CORUFLEX sanding sleeves P 80 3 pieces of 434.574 carrying case L-BOXX 238 44.093 case insert 433.98
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 433.470 Sanding attachment, pipe belt Sanding attachment for pipe belt sanding. For the TRINOXFLEX. Tool-free fitting via the quick-change system. Variably adjustable attachment. 46.547 Dust extraction guard Extraction hood for the BSE 4-3 00 with extraction connection (D32 clip) for rollers and brushes with max. Ø 0. 433.896 Rubber air roller For sensitive contour sanding. 00 Ø x 00
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 433.926 Expansion roller 00 Ø x 00 For using sanding/polishing sleeves. These are simply pushed over the rubber holder and held securely in place by centrifugal force. 256.284 Air pump For pumping up rubber air rollers. 303.054 Drive roller 62 Ø x 70 With stainless steel guide discs. Needed is the distance ring set (Order no. 250.522).
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 257.375 Poli-clean 00 Ø x 00 extra coarse Hard-structured fleece wheel. For cleaning welds and intensive, pore-deep removal of rust and oxidation layers. Flap wheel sanding 00 Ø x 50 P 40 250.496 00 Ø x 50 P 60 250.498 00 Ø x 50 P 80 250.499 00 Ø x 50 P 20 250.50 00 Ø x 50 P 80 250.504 00 Ø x 50 P 240 250.505 00 Ø x 00 P 40 358.827 00 Ø x 00 P 60 358.835 00 Ø x 00 P 80 358.843 00 Ø x 00 P 20 358.85 00 Ø x 00 P 80 358.878 00 Ø x 00 P 240 358.886 Flexible sanding wheel with individual flexible flap-type sanding lamellae and keyway. 2 wheels are required. For paint removal, sanding and strong graining applications. Removes scratches, rust, old paint, scale and burrs. The 40 grit employed enables the removal of even deep scratches on stainless steel.
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Sanding fleece top 00 Ø x 00 A 80 (coarse) 377.90 00 Ø x 00 A 80 (medium) 377.929 00 Ø x 00 A 280 (fine) 377.937 Flexible fleece roller with heavy-duty fleece. Maximum service life and high grinding power shorten the grinding time. For stainless steel, steel, copper, brass and aluminium. For cleaning, burnishing and smoothing. Sanding fleece 00 Ø x 50 A 80 (coarse) 250.509 00 Ø x 50 A 60 (medium) 250.50 00 Ø x 50 A 280 (fine) 250.52 00 Ø x 50 A 400 (very fine) 250.53 00 Ø x 00 A 80 (coarse) 256.973 00 Ø x 00 A 60 (medium) 256.974 00 Ø x 00 A 280 (fine) 256.975 00 Ø x 00 A 400 (very fine) 256.976 Flexible polishing wheel made of sanding grit-impregnated nylon web with a keyway. Two wheels are required (for 50 wide fleece only). Achieves effective surface finishes on stainless steel, copper, aluminum, brass, etc. Also ideal for cleaning oxidized coatings and smoothing plastic and wood.
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Sanding fleece flap 00 Ø x 50 P 80/A 60 250.55 00 Ø x 50 P 50/A 280 250.56 00 Ø x 50 P 240/A 280 358.894 00 Ø x 00 P 80/A 60 256.977 00 Ø x 00 P 50/A 280 256.978 00 Ø x 00 P 240/A 280 358.908 Flexible combination of sanding flap and sanding fleece. Two wheels are required (for 50 wide). Suitable for dulling and finishing. Removes small scratches on metal, hard plastics and wood. Grinding fleece, folded 00 Ø x 00 A 00 347.272 00 Ø x 00 A 80 347.280 00 Ø x 00 A 280 347.299 Flexible polishing wheel with multiple-folded grinding fleece for practically ridge-free grinding stainless steel, copper, aluminium, brass, etc.
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Fine polishing roller 00 Ø x 50 K 60 250.525 00 Ø x 50 K 80 250.526 Soft rubber polishing wheel made of grit-impregnated rubber web. 2 rollers are required. For particularly bright longitudinal structures. Best effects are achieved on stainless steel. 25.624 Nylon brushes 00 Ø x 70 S 80 Impregnated with sanding grits. Flexible, interspersed plastic brushes. For deburring, cleaning, roughing and smoothing. (Also suitable for wood, brushing applications and removing fibres.) Needed is one piece plus distance ring set (order no. 250.522).
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 25.625 Stainless steel wire brush 00 Ø x 70 Flexible stainless steel wire brush. Rust removal, deburring, roughing and paint removal. Needed is one piece plus distance ring set (Order no. 250.522). 25.626 Stranded wire brushes 00 Ø x 70 Made of strong, twisted, gold-colored steel wire. Extremely tough and rigid. For rust removal, deburring, removing dirt and old paint. Brings up the grain structure in wood. Needed is one piece plus distance ring set (order no. 250.522).
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 257.374 Polishing felt 00 Ø x 50 Soft, flexible felt polishing wheel. Two wheels are required. For high-gloss polishing when using polishing pastes and creams. 37.950 Cotton buffing wheel 00 Ø x 0 8 Polishing ring made of impregnated cotton cloth. Achieves a high-gloss polished finish on aluminum, brass and stainless steel. Needed are 8 pieces plus distance ring set (order no. 250.522).
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Sanding-polishing sleeve 00 Ø x 00 S 600 436.429 00 Ø x 00 S 500 436.437 For high-gloss polishing without polishing agents in two steps. Sanding sleeve ZIRCOFLEX 00 Ø x 00 P 60 5 434.507 00 Ø x 00 P 80 5 434.55 00 Ø x 00 P 20 5 434.523 Sanding sleeve with high-quality, self-sharpening zirconium corundum for a longer service life. High abrasion performance in coarse and intermediate sanding on steel and stainless steel surfaces.
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Sanding sleeve CERAFLEX 00 Ø x 00 60 5 434.53 00 Ø x 00 80 5 434.558 00 Ø x 00 20 5 434.566 Flexible high-performance sanding sleeve for optimum sanding performance, with high abrasion performance and an extremely long service life thanks to self-sharpening, micro-crystalline ceramic grit for preliminary and intermediate sanding on stainless steel surfaces. Cool sanding thanks to additional multi-bonding. Sanding sleeve CORUFLEX 00 Ø x 00 P 80 5 434.574 00 Ø x 00 P 240 5 434.582 Highly flexible sanding sleeve with annealed corundum grit and active-sanding agents for finishing stainless steel. Particularly suitable for finish sanding.
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 434.590 Sanding sleeve MESHFLEX 00 Ø x 00 A 00 For removing minor damage, scratches, tarnish, flash rust, scale and dirt. Removing tarnish at welds without heat distortion at thin plates. For grinding, cleaning and finishing stainless steel, steel, titanium alloys, light metals, non-ferrous metals and plastics. 434.604 Sanding sleeve MESHFLEX 00 Ø x 00 A 240 For removing minor damage, scratches, tarnish, flash rust, scale and dirt. Removing tarnish at welds without heat distortion at thin plates. For grinding, cleaning and finishing stainless steel, steel, titanium alloys, light metals, non-ferrous metals and plastics.
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 434.62 Sanding sleeve MESHFLEX 00 Ø x 00 A 400 For removing minor damage, scratches, tarnish, flash rust, scale and dirt. Removing tarnish at welds without heat distortion at thin plates. For grinding, cleaning and finishing stainless steel, steel, titanium alloys, light metals, non-ferrous metals and plastics. 284.78 Velcro sanding belt 600 x 40 P 60 0 For polishing pipes and pipe fittings. The drive roller RA 62x70 INOX 303.054 is needed.
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 284.726 Velcro sanding belt 600 x 40 P 20 0 For polishing pipes and pipe fittings. The drive roller RA 62x70 INOX 303.054 is needed. 28.069 Velcro fleece 600 x 40 A 00 2 For polishing pipes and pipe fittings. The drive roller RA 62x70 INOX 303.054 is needed. 28.077 Velcro fleece 600 x 40 A 80 2 For polishing pipes and pipe fittings. The drive roller RA 62x70 INOX 303.054 is needed.
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 28.085 Velcro fleece 600 x 40 S 400 2 For polishing pipes and pipe fittings. The drive roller RA 62x70 INOX 303.054 is needed. 38.736 Superfinishing band 600 x 40 S 500 2 For high-gloss polishing of stainless steel. The drive roller RA 62x70 INOX 303.054 is needed. 28.050 Velcro drive belt, blue 700 x 30 2 For closing and releasing the different belts. Simple application - tensile resistance up to 00 kg. The drive roller RA 62x70 INOX 303.054 is
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 needed. 25.838 Adhesive tape for sanding belt 40 x 5000 For sealing open sanding belts. The drive roller RA 62x70 INOX 303.054 is needed. 433.98 Case insert Matching insert for BSE/BRE/BSE INOX 4-3 for carry case L-BOXX 238.
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 44.093 Carrying case L-BOXX External dimensions L x W x H 442 x 357 x 253 Internal dimensions L x W x H 378 x 306 x 209 Weight 2,8 kg The robust storage and transport system L-BOXX made of impact-resistant plastic conveys tools, accessories and consumables easily and comfortably to the place of use. Elaborate inserts provide order and clarity, ergonomically shaped handles and additional moulded recesses for flexible and comfortable handling. The unbeatably simple connection and disconnection of the different L-BOXXes optimises combined transportation. Fits the TÜV-tested in-vehicle equipment system from Sortimo perfectly and without adapters. Load capacity per L-BOXX up to 25 kg, combined transportation up to 40 kg, the cover can be loaded up to 00 kg. Splash-proof. Without insert. 250.522 Distance ring set 6 Required for nylon brushes, stainless steel wire brushes, stranded wire brushes, cotton buffing wheels. Also necessary for sanding flaps, sanding fleeces, sanding fleece flaps, fine sanding rollers and sanding wheels less than 00 wide if only one sanding wheel is to be mounted. Powered by TCPDF (www.tcpdf.org)