VINTNER UFFET HRDWRE 16 - wood dowels 26 - back 16 - bolts 4 - pull bolts Thank you for purchasing the Vintner uffet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. s you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. 16 - flat washers 16 - spring washers Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED phillips head screwdriver allen wrench (included) 16-4 - shelf pins (We recommend the use of hand tools instead of power tools) COMPONENTS 4 - pulls 2 - side s 1 - fixed shelf 1 - bottom 4 - feet 1 - partition 1 - top 3 - back s 2 - doors 1 - adjustable shelf (1 top, 1 middle, 1 bottom) 2 - sides 2 - backs 2 - bottoms 2 - fronts Made in China - r04 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 1 of 5
VINTNER UFFET left and right side s right side fixed shelf partition left side 1 ) Insert 4 wood dowels into left and right side s as shown. ) Insert 2 wood dowels into partition as shown. 2 Fit dowels of left and right side s into corresponding holes of fixed shelf as shown. Secure each side with 2 bolts, 2 spring washers and 2 flat washers, using an allen wrench. Do not over tighten the bolts. bottom 3 Fit dowels of assembled unit into corresponding holes of bottom as shown. Secure bottom with 4 bolts, 4 spring washers and 4 flat washers, using an allen wrench. 4 ttach 4 feet to bottom of assembled unit as shown. Turn each foot clockwise to secure. Made in China - r04 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 2 of 5
VINTNER UFFET partition top top 5 With the assistance of another adult, carefully position unit upright. Fit dowels of partition into corresponding holes of assembled unit as shown. Secure partition with 2 bolts, 2 spring washers, 2 flat washers as shown. 6 ) Insert 6 wood dowels into top as shown. ) Fit dowels of top into corresponding holes of assembled unit. Secure top wtih 6 bolts, 6 spring washers, 6 flat washers as shown. NOTE: Do not over tigthen the door hinge right back hinge left back middle back 7 ttach left/middle/right back s to back of assembled unit with 26 back. Secure, but do not over tighten with a phillips head screwdriver. 8 ) Fit hinges of left/right doors into corresponding hinges of left/right side s of assembled unit as shown. Make sure each door hinge is securely engaged into each hinge. ) ttach 1 pull to each door with 1 pull bolt, using a screwdriver. Made in China - r04 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 3 of 5
VINTNER UFFET left right back adjustable shelf NOTE: Make sure wheels of right/left are towards the back as shown 9 ) Insert 4 shelf pins at desired heights as shown. ) Place adjustable shelf into assembled unit. Make sure shelf is securely supported by each shelf pin. 10 ttach left and right to back with 2 as shown, using a screwdriver. bottom front 11 Slide bottom into grooves of assembly as shown. 12 ttach front to assembly with 4 as shown. Made in China - r04 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 4 of 5
VINTNER UFFET assembly pull 13 ttach 1 pull to each front with 1 pull bolt as shown. Repeat steps 10-13 for remaining assembly. 14 Fit glides of assemblies into corresponding glides of assembled unit as shown. ssembly is now complete. CLENING & CRE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer. It is recommended to use coasters to protect surface from heat and water. Made in China - r04 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 5 of 5
VINTNER HUTCH SSEMLY HRDWRE 30 - small 12 - hook 8 - large 12 -allen bolts 2 - pull bolts 12 - spring washers 12 - flat washers 12 - wood dowels 3 - connecting brackets 6 - connecting 6 - hooks 2 - pulls WLL MOUNTING HRDWRE Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Vintner Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. s you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. 2 - mounting 1 - wall brackets strap TOOLS REQUIRED 1 - plastic anchor 1 - mounting screw 1 - pan head screw allen wrench (included) phillips head screwdriver (We recommend the use of hand tools instead of power tools) COMPONENTS 1 - top 1 - bottom 2 - side s 1 - top fixed shelf 1 - top back 1 - middle back 1 - bottom back 2 - doors 2 - storage racks (1 front, 1 back) 2 - storage rack sides Made in China - r08 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 1 of 5
VINTNER HUTCH NOTE: Do not over tighten the top bottom fixed left and right side s 1 Insert 4 wood dowels into left/right side s and top as shown. 2 ttach 6 hooks with 2 hook per hook to bottom fixed as shown. Secure, but do not over tighten, using a phillips head screwdriver. right side bottom fixed shelf top fixed shelf left side NOTE: Do not over tighten the bolts 3 Fit dowels of left side into corresponding holes of top and bottom fixed shelves as shown. Secure with 4 allen bolts, 4 spring washers and 4 flat washers using an allen wrench. Do not over tighten the bolts. 4 Fit dowels of right side into corresponding holes of assembled unit. Secure with 4 allen bolts, 4 spring wahsers and 4 flat washers. Made in China - r08 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 2 of 5
VINTNER HUTCH top pull right door left door 5 ) With the assistance of another adult, carefully position unit upright. ttach left and right doors to assembled unit by fitting hinge of doors into corresponding hinge of left and right side s as shown. ) ttach 1 pull to each door with 1 phillips bolt, using a screwdriver. 6 Fit dowels of top into corresponding holes of assembled unit. Secure with 4 allen bolts, 4 spring washers and 4 flat washers using an allen wrench. top back NOTE: Make sure curved edges of right and left storage shelf face each other during assembly right storage rack shelf middle back bottom back left storage rack shelf storage rack front/back 7 ttach bottom/middle/top back s to back of assembled unit as shown. Secure back s with 30 small using a screwdriver. 8 ttach left and right storage rack sides to 2 storage rack front and back with 8 large as shown using a screwdriver. Made in China - r08 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 3 of 5
VINTNER HUTCH Make sure curved edges of storage rack assembly are in front as shown 9 Fit shelf assembly into unit. storage rack assembly 10 With the assistance of another adult, place hutch onto buffet as shown. ttach 3 connecting brackets to buffet (sold separately) and hutch assembly with 2 connecting per bracket as shown, using a screwdriver. ssembly is now complete CLENING ND CRE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. Made in China - r08 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 4 of 5
VINTNER HUTCH WLL MOUNTING SSEMLY WLL hutch C plastic anchor mounting bracket pan head screw mounting bracket D mounting screw buffet (sold separately) NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store. For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. ) ttach 1 mounting bracket to top of unit as shown, using 1 pan head screw. ) Determine the final location of unit. Mark position on the wall, approximately 2" below the bracket mounted to the back of the hutch. C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall. D) ttach the mounting bracket to the wall by inserting 1 mounting screw through the wall fitting and into each plastic anchor in the wall. E) Place the unit so the wall fitting on the back edge is aligned with the wall fitting on wall. F) Lace one end of the wall strap through both fittings, and into the other end of the strap. G) Pull the strap tightly until secure. Repeat steps for remaining fitting and wall strap. Wall mounting assembly is now complete. Made in China - r08 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 5 of 5