S L 1 16 8 7 8 9 M e n u 4 5 6 1 2 3 E n te r 0 Transmitter: Flow range: 0 ~ ±40ft/s (0 ~ ±12m/s) Accuracy: ±1.0% Repeatability: 0.3% Outputs: OCT, 0-9999 KHz
Sl 1168 Ultrasonic Flowmeter Brochure Series1168 Ultrasonic Flowmeter uses the latest digital technology and low-voltage broadband pulse transmission. The instrument is tolerant of liquids with small amounts of air bubbles suspended solids found in most industrial environments. With distinctive features such as high accuracy, high reliability, the MPU in the instrument provides unique digital signal processing and a relevant test programs. This flowmeter provides long-term no-drift measurements and sts the operating software to adjust parameters accding to changing conditions. Simple operation Designed to be user friendly & easy to operate Very simple and convenient
Features Compact design, easy to install. Using weather-proof robust housing materials: crosion-resistant, rust-resistant, freeze resistant. Designed to be user friendly, easy to operate. Users can finish installations within just 20 min. Suitable f measurement in many different wking conditions. Transducers SL1168 is equipped clamp-on transducers made with SiteLab patented technology, which is suitable f metal, PVC and other pipe materials, lined pipe. The transducers use robust material with the high perfmance piezoelectric crystals, which will high accuracy and good perfmance during measurement. At the same time, it's easy and convenient to install. Users only need to fix it on the pipe with the pipe strips, and setup the transducer spacing accding to the prompt of the meter. It only takes minutes to complete.
SL1168 Ultrasonic Flowmeter SL 1168 Ultrasonic Flowmeter uses advanced framewk configuration with compact design. It consists of five main parts: enclosure, LCD display, power supply board, PCB mainboard and operating panel. This configuration increases the reliability of the product and decreases the cost and maintenance as well. The convenient digital menu operation can easily be used to setup the pipe size, pipe material, pipe thickness, fluid type, output signal and other parameters. Flow transmitter Clamp-on transducers Installation Locking Collar Grease coupling compound Pipe strips
Application SL1168 Ultrasonic Flowmeter is aim at irrigation application. Compact fm design, easy to operate High dynamic response measurement with economical price, also, the intelligent control makes the products carrying fault alarm alerts and self checking function, which highly increase the wking efficiency. Garden Grapery Cropland Cropland
Quick start setup Windows operating software is used f setup within 5minutes and f easy debugging and installation of the flowmeter. F example, with a pipe diameter of DN200, water, pipe material carbon steel, pipe wall thickness 6mm, no pipe inside liner, the SL1168 can be programmed as follows! Pipe outside diameter: Pi pe Ou t e r Di a me t er 200 mm Pipe Wall Thickness 6 mm Menu 1 1 keys to enter Window M11, and enter the pipe outside diameter, and then press the 6mm, and press the Pipe material: key. 1 2 keys to enter Window M12, pipe wall thickness: key. Pi pe Ma t e r i a l [ 14 0. Ca r b on St eel move the 1 4 key to enter Window M14, press the key to select pipe material: carbon steel. key, L i nner Ma t e r i a l [ 16 0. No n e, No L i n er Liner material parameters: Press 1 6 keys to enter Window M16, and press the key, move the key to select liner material: No Liner F lu i d T y p e [ 20 0. Wa t er Fluid type 2 0 keys to enter Window M20, press the key, move the key to select fluid type, Display the measuring result Menu 0 1 keys to enter Window M01 f the flow rate. T r a n s duc e r T y pe [23 0. St and a rd F lo w 0.112 9 m3 /h *R Vel 1.0415 m/s Tr a n s duc e r Mount i ng 0. V Transducer Spacing 159.86 mm Transducer type 2 3 keys to enter Window M23, press the key, move the key to select Transducer type Transducer mounting methods 2 4 keys to enter Window M24, press the key, move the key to select Transducer mounting methods. Adjust Transducer spacing 2 5 keys to enter Window M25, accurately install the transducer accding to the displayed transducer mounting spacing.
Transducer installation steps The installation of the ultrasonic flowmeter is the simplest one in all the flowmeters. Users only need to select an appropriate measurement point, input the parameters f the measurement point pipe to the flowmeter, and install the transducer to measure. 1. Select measurement point 2. Mark a hizontal line 8. Apply the second one with the same way 3. Select a second point on the hizontal line using the transduce r spacing displayed by the meter 7. Transducer installation is done Transducers installed 4 Apply the coupling compound to the bottom of the transducers. 6. Fix the transducers with pipe straps. 5. Place the transducers on the selected measurement points.
Specifications Perfmance specifications Flow range: 0 "40 ft /s (0 "12 m/s) Accuracy: "1.0% Repeatability: 0.3% Pipe size: 1 in to 16 in (25mm ~ 400mm) Functional specifications Output: 0#9999Hz, OCT Power supply: 10 ~ 36 VDC$200mA(MAX) Keypad: 16 (4X4) touch key-press Display: 20X2 alphanumeric, backlit LCD Temperature range: Transmitter: -10 C ~ 50 C Transducer: -40 C ~ 80 C (Standard) Humidity: Up to 99% RH, non-condensing Physical specifications Transmitter: NEMA 4X(IP65) Transducer: Encapsulated design Weight: Transmitter: approximately 1.5 lb (0.7kg) Transducer:approximately 1.8lb (0.8kg) Agent: Agent: