ROTATIONAL TUBE CUTTER ROTUCUT High speed for more productivity
HIGH-PERFORMANCE CUTTER Optimal cutting results with shearing and sawing From raw tube to finished tube, the SMS group supplies everything from specific machinery to complete plant systems for the manufacture of tubes of copper and copper alloys worldwide. SPECIAL CHARACTERISTICS The usual cutting processes are: Shearing Sawing The SMS group has developed a high-performance cutter for the production of copper tubes with increased productivity. When using the above processes, the copper tubes are cut on the fly by a travelling carriage. Operators utilising a high-performance cutter integrated into their overall plant quickly see a return on their investment. The high-performance ROTUCUT cuts copper tubes using rotating knives. Operators profit from high speeds and improved cutting results combined with optimum length tolerances while increasing productivity. 5 6 Finish drawing line for pancakes Vmax = 150 m / min. 2
Carriage 1 3 2 4 1 2 3 4 5 6 Pay-off reel Pre-straightener Caterpillar-type drawing unit Straightening and testing unit ROTUCUT Pancake coiler 3
WORKING PRINCIPLE An investment that quickly pays off During the cutting process, the tube is clamped and a drawing force is applied. When the cutting knives reach a pre-defined cutting depth in the tube, it breaks off due to the applied drawing force. CUTTING QUALITY Operating the rotational tube cutter in the manner described leads to a straight and chip-free cut. PROFITABILITY Given the functional principle and operation of the rotational tube cutter, the investment in the equipment pays back very quickly. The graph on page 5 shows the savings over years for different tube diameters and lengths. This projection is based on standard operating condition of a copper tube mill. OPERATION The rotational tube cutter is operated from the central control panel of the copper tube drawing machine. The tube length is pre-selected. All other necessary parameters are stored in the machine control system. An additional control panel is installed directly on the cutter. MAINTENANCE The rotational tube cutter requires only minimum maintenance due to its mechanical design concept. Changing of knives and clamping jaws is quick and easy. Cutting knives 4 Tube clamping Tube cuts
ROTUCUT Rotational Tube Cutter c Savings in finishing costs per 1000 t/a tube production TEUR b 70 c 60 50 a 40 b 30 a 20 10 1 2 3 Year a b c ø 15 x 0.9 ø 22 x 1.0 ø 28 x 1.2 3 m tube length 5 m tube length Calculation of efficiency Ancillary conditions Production increases by two percent, because there is no need for any post-cutting. Taking into consideration possible recycling of cuttings, the curves shown in the graph result as a function of tube diameter and length. The graph s values are standardised to a tube production of 1000 t / y. Basis: copper price 5.65 EUR / kg 5
TECHNICAL DATA Flexible application MODELS The ROTUCUT rotational tube cutter is recoended for copper tube plants with a maximum throughput speed of 150 m/min. The aforementioned conditions are based on a minimum tube length of 3 m. Therefore, the cutter may also operate at a speed of 200 m/min from a tube length of 4 m. 6
REQUIRED SPACE AND WEIGHTS TECHNICAL DATA ROTUCUT ROTUCUT DH 900 Tube diameter (4) 6 to 28 H approx. 1150 Wall thickness (0.3) 0.5 to 1.5 (2) L approx. 4100 Max. speed m/min 150 (200) B1 approx. 1100 Min. tube length 3000 (4000) B2 approx. 1500 Max. cycle 1/min 50 tube lengths B3 approx. 1010 Power requirement kw 55 B4 approx. 540 Weight t approx. 2.2 Performance and quality specifications are not binding characteristics and strongly depend on the type, quality and dimensions of the raw materials used, the state of maintenance of the equipment etc. All specifications are in accordance with the technical state of the art at the time they were submitted for printing. Technical modifications and errors are reserved. 7
SMS GROUP GMBH Forging Plants Business Unit Copper Plants Ohlerkirchweg 66 41069 Mönchengladbach Phone: +49 2161 350-2321 Fax: +49 2161 350-2318 copperplants@sms-group.com www.sms-group.com The information provided in this brochure contains a general description of the performance characteristics of the products concerned. The actual products may not always have these characteristics as described and, in particular, these may change as a result of further developments of the products. The provision of this information is not intended to have and will not have legal effect. An obligation to deliver products having particular characteristics shall only exist if expressly agreed in the terms of the contract. F2202.01/16 en Printed in Germany Germany