Side-view white LED Surface mount lead frame package with two pins Wide viewing angles Product Photo Here The is ideal for backlighting LCD screens and for coupling with light guides. This design combines high optical efficiency with wide viewing angles ( = 120, y = 110 ) and low power consumption. Applications LCD backlight Hand-held appliances Indicators Switch and message illumination Part Number Material Emitted Color Intensity Typ. mcd Lens Color GaN White Water Clear 2000 3 DIMENSIONS ARE IN: [MILLIMETERS] INCHES RoHS Moisture DO NOT LOOK DIRECTLY GENERAL TOLERANCE: ± 0.1 AT LED WITH UNSHIELDED PACKAGE: HEAT RESISTANT POLYMER EYES OR DAMAGE TO LEAD FRAME: Cu ALLOY AND Ag PLATING RETINA MAY OCCUR. Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleled@optekinc.com www.optekinc.com Page 1 of 8
Absolute Maimum Ratings T A = 25 o C (on metal core PCB) unless otherwise noted Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Forward Current Reduction Peak Forward Current (10% Duty Cycle, Pulse Width 10msec) Power Dissipation ESD Threshold (HBM) -40 ~ +100 C -30 ~ +85 C 5 V 30 ma -0.50 ma/ C 80 ma 120 mw 2000V Electrical Characteristics T A = 25 o C (on metal core PCB) unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS I V Luminous Intensity 1860 2000 2210 mcd I F = 20 ma V F Forward Voltage 3.0 3.2 3.4 V I F = 20 ma I R Reverse Current ---- ---- 2.0 µa V R = 5 V 2 ½ 50% Power Angle ---- =120 y=110 ---- deg I F = 20 ma Ranking Table Applies ---- I F = 20 ma y (see Pages 3 and 5) ---- I F = 20 ma Radiation Pattern X Y Relative Luminous Intensity Relative Luminous Intensity Page 2 of 10 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleled@optekinc.com www.optekinc.com
Standard Bins (I F = 20 ma) Lamps are sorted to luminous intensity (I V ) and chromaticity coordinates (, y) bins shown. Orders for OVSWAC1R6 may be filled with any or all bins contained as below. Luminous Intensity 2210 2140 2070 2000 1930 1860 3 2 1 W V CIE Diagram 0.28 0.27 Y 0.26 0.25 0.24 L2 L3 M2 M3 N2 L4 N3 L5 M4 M5 N4 L6 N5 M6 L7 L8 M7 N6 N7 M8 N8 0.23 0.22 0.26 0.27 0.28 0.29 Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Pb content <1000 PPM. 3. Luminous intensity measurement allowance ± 5%. 4. coordinates measurement allowance ± 0.005. 5. To designate luminous intensity ranks or chromaticity bins, please contact OPTEK. X Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleled@optekinc.com www.optekinc.com Page 3 of 8
Standard Bins (I F = 20 ma) Lamps are sorted to luminous intensity (I V ) and chromaticity coordinates (, y) bins shown. Orders for OVSWAC1R6 may be filled with any or all bins contained as below. Rank L2 L3 L4 0.2692 0.2713 0.2739 0.2718 0.2718 0.2739 0.2765 0.2744 0.2744 0.2765 0.2791 0.2770 y 0.2361 0.2350 0.2397 0.2408 0.2408 0.2397 0.2444 0.2455 0.2455 0.2444 0.2491 0.2502 Rank L5 L6 L7 0.2770 0.2791 0.2817 0.2796 0.2796 0.2817 0.2843 0.2822 0.2822 0.2843 0.2869 0.2848 y 0.2502 0.2491 0.2538 0.2550 0.2550 0.2538 0.2586 0.2597 0.2597 0.2586 0.2633 0.2644 Rank L8 0.2848 0.2869 0.2895 0.2874 y 0.2644 0.2633 0.2680 0.2691 Rank M2 M3 M4 0.2713 0.2736 0.2761 0.2739 0.2739 0.2761 0.2787 0.2766 0.2765 0.2787 0.2813 0.2791 y 0.2350 0.2338 0.2385 0.2397 0.2397 0.2385 0.2433 0.2444 0.2444 0.2433 0.2480 0.2491 Rank M5 M6 M7 0.2791 0.2813 0.2838 0.2817 0.2817 0.2838 0.2864 0.2843 0.2843 0.2864 0.2889 0.2869 y 0.2491 0.2480 0.2527 0.2538 0.2538 0.2527 0.2575 0.2586 0.2586 0.2575 0.2622 0.2633 Rank M8 0.2869 0.2889 0.2915 0.2895 y 0.2633 0.2622 0.2670 0.2680 Rank N2 N3 N4 0.2736 0.2757 0.2782 0.2761 0.2761 0.2782 0.2807 0.2787 0.2787 0.2807 0.2833 0.2813 y 0.2338 0.2327 0.2374 0.2385 0.2385 0.2374 0.2422 0.2433 0.2433 0.2422 0.2470 0.2480 Rank N5 N6 N7 0.2813 0.2833 0.2858 0.2838 0.2838 0.2858 0.2883 0.2864 0.2864 0.2883 0.2908 0.2889 y 0.2480 0.2470 0.2517 0.2527 0.2527 0.2517 0.2565 0.2575 0.2575 0.2565 0.2612 0.2622 Rank N8 0.2889 0.2908 0.2933 0.2915 y 0.2622 0.2612 0.2660 0.2670 Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Pb content <1000 PPM. 3. Luminous intensity measurement allowance ± 5%. 4. coordinates measurement allowance ± 0.005. 5. To designate luminous intensity ranks or chromaticity bins, please contact OPTEK. Page 4 of 10 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleled@optekinc.com www.optekinc.com
Series Typical Electro-Optical Characteristics Curves 100 1000 50 30 500 300 10 % 100 ma 5 3 50 30 1 1000 2.5 3.0 3.5 4.0 4.5 V Forward Current vs Forward Voltage 10 1 3 5 10 30 50 100 ma Relative Luminous Intensity vs Forward Current 0.35 500 300 0.30 100 y 0.25 50 30 0.20 10-40 -20 0 20 40 60 80 100 C Relative Luminous Intensity vs Ambient Temperature 100 0.15 0.15 0.20 0.25 0.30 0.35 vs Forward Current 80 % 60 40 20 0 350 400 450 500 550 600 650 700 750 800 nm Relative Emission Intensity Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleled@optekinc.com www.optekinc.com Page 5 of 8
Packing Information: 7-inch reel Carrier Tape Dimensions: Loaded quantity 3000 pieces per reel Page 6 of 10 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleled@optekinc.com www.optekinc.com
Moisture Resistant Reel Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label Recommended Soldering Pattern (Unit: mm) 1.4 1.0 1.4 0.9 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleled@optekinc.com www.optekinc.com Page 7 of 8
Page 8 of 10 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleled@optekinc.com www.optekinc.com