Reduced Voltage Starters ontrolled starting for low in-rush and smooth operation Sprecher + Schuh reduced voltage starters are designed for starting squirrel cage induction motors where the starting current of a motor is likely to exceed local power company restrictions, interfere with plant operations or where the load may be damaged by high starting torques. Starting with the best All Sprecher + Schuh reduced voltage starters feature our AT7 and AT9 line of motor starters. These compact starters offer intermediate sizes to better match specific motor requirements. This equates to generous wiring space and less wasted horsepower capacity. Our advanced EP7 solid state overload relays are used with starters. See Section B in this catalog for a full description of these excellent motor protection relays. hoosing the right reduced voltage method Autotransformer Starter At starting, three autotransformers (one for each phase) are automatically connected in series with the motor. The voltage at the motor is reduced to either 50%, 65% or 80% depending on which voltage tap was selected. After a timed interval, a contactor connects the motor across-the-line and shorts out the autotransformers. Factory standard autotransformers are rated for medium duty as defined by NEA. Part Winding Starter This type of starting requires that the motor winding be in two equal parts, and that at least six terminal leads be provided on the motor. At starting, the controller is arranged to connect one section of the winding to the supply lines. After a timed interval, a second contactor connects the other section of the motor winding to the supply lines, in parallel with the first. Wye-elta Starter This type of starting requires a special wye-delta motor. Both ends of the motor s three windings are brought out so they are accessible for reconnecting from wye to delta. At starting, the controller connects the motor in the wye configuration. After a timed interval, a second contactor connects the motor in a delta configuration. The reference chart below compares all three reduced voltage starting methods and contrasts them with across-theline starting. Reduced Voltage omparison Table Type of Starter Starting haracteristics Line urrent Voltage @ otor Starting Torque Across-The-Line 100% 100% 100% Autotransformer 80% 65% 50% 64% 42% 25% 64% 42% 25% Part Winding 100% 65% 42% Advantages l Least expensive. l Simple to maintain. l Highest starting torque. l Readily available. l Lowest installation cost. l Provides highest torque per ampere of line current. l Three different taps on transformer permit adjustment of starting voltage. l Suitable for long starting periods. l losed transition starting. l Uses standard motor.. l Least expensive of all reduced voltage starters. l losed transition starting. l Small physical size. l ost dual voltage motors can be used. l Simple design. l Low installation cost. isadvantages l High starting inrush may exceed limits of local utility or electrical system. l Starting torque may be too high for the application. l Limited to smaller horsepower motors. l n lower horsepower, is the most expensive design. l Low power factor. l Large physical size. l High installation cost. l Poor torque efficiency l Unsuited for high inertia, long starting loads. l otor may not accelerate during start period. l Requires special motor design for voltages higher than 230 volts. Wye-elta 100% 33% 33% l Suitable for high inertia, long acceleration loads. l High torque efficiency. l deal for especially stringent inrush restrictions. l deal for frequent starts. l Requires special motor design. l Low starting torque. l Open transition (closed available). l omplex design. 87
Autotransformer - Series AAT Autotransformer 10 HP to 125 HP (losed Transition - Type 1 General Purpose Enclosure) ➍ aximum H.P. 10 15 20 25 30 40 50 60 75 100 125 3 Ø Volts out Short ircuit Protection B Thermal agnetic ircuit Breaker (B) Fuse lip Fusible isconnect ➋➎ atalog No. Price ➊ atalog No. Price ➊ ➌ atalog No. Price ➊ AAT AAT AAT 200 BA7-37- - -G0 7,468.78 F 50 BA7-37- - -TB50G0 9,603.73 S 60 BA7-37- - -JF62G0 8,835.19 S 230 BB7-37- - -G0 7,468.78 F 50 BB7-37- - -TB50G0 9,603.73 S 60 BB7-37- - -JF62G0 8,835.19 S 200 A7-60- - -G0 9,302.24 F 100 A7-60- - -TB100G0 11,433.11 S 100 A7-60- - -JF63G0 9,537.30 S 230 B7-43- - -G0 7,783.55 F 80 B7-43- - -TB80G0 9,918.51 S 100 B7-43- - -JF63G0 9,185.74 S 200 A7-72- - -G0 9,563.88 F 125 A7-72- - -TB125G0 11,695.77 S 100 A7-72- - -JF63G0 9,799.96 S 230 B7-60- - -G0 9,302.24 F 100 B7-60- - -TB100G0 11,433.11 S 100 B7-60- - -JF63G0 9,537.30 S 200 EA7-85- - -G0 9,901.14 F 125 EA7-85- - -TB125G0 12,034.05 S 200 EA7-85- - -JF64G0 10,137.22 S 230 EB7-72- - -G0 9,563.88 F 125 EB7-72- - -TB125G0 11,695.77 S 100 EB7-72- - -JF63G0 9,799.96 S 460 E7-37- - -G0 7,468.78 F 50 E7-37- - -TB50G0 9,603.73 S 60 E7-37- - -JF62G0 8,835.19 S 200 FA7-97- - -G0 10,646.17 F 175 FA7-97- - -TB175G0 ➏ 12,840.41 S 200 FA7-97- - -JF64G0 13,319.73 230 FB7-85- - -G0 9,901.14 F 125 FB7-85- - -TB125G0 12,034.05 S 200 FB7-85- - -JF64G0 10,137.22 S 460 F7-43- - -G0 7,783.55 F 70 F7-43- - -TB70G0 9,918.51 S 60 F7-43- - -JF62G0 9,185.74 S 575 F7-37- - -G0 7,468.78 F 50 F7-37- - -TBH50G0 9,751.92 S 60 F7-37- - -JF62G0 8,835.19 S 200 GA9-146- - -G0 ➐ 15,829.76 H 225 GA9-146- - -TB225G0 ➐ 21,036.85 J 200 GA9-146- - -JF64G0 ➐ 24,475.88 J 230 GB9-116- - -G0 ➐ 13,646.77 H 200 GB9-116- - -TB200G0 ➐ 18,135.39 J 200 GB9-116- - -JF64G0 ➐ 21,100.21 J 460 G7-60- - -G0 9,302.24 F 100 G7-60- - -TB100G0 11,433.11 S 100 G7-60- - -JF63G0 9,537.30 S 575 G7-60- - -G0 9,302.24 F 80 G7-60- - -TBH80G0 11,581.30 S 60 G7-60- - -JF62G0 9,537.30 S 200 HA9-190- - -G0 ➐ 21,173.80 300 HA9-190- - -TB300G0 ➐ 26,365.56 J 400 HA9-190- - -JF65G0 ➐ 27,030.88 K3 230 HB9-146- - -G0 ➐ 15,829.76 250 HB9-146- - -TB250G0 ➐ 21,036.85 J 200 HB9-146- - -JF64G0 ➐ 24,475.88 J 460 H7-72- - -G0 9,563.88 F 125 H7-72- - -TB125G0 11,695.77 S 100 H7-72- - -JF63G0 9,799.96 S 575 H7-60- - -G0 9,302.24 F 100 H7-60- - -TBH100G0 11,581.30 S 100 H7-60- - -JF63G0 9,537.30 S 200 JA9-205- - -G0 ➐ 3,3824.11 J 350 JA9-205- - -TB350G0 ➐ 44,179.02 J 400 JA9-205- - -JF65G0 ➐ 40,981.18 K3 230 JB9-190- - -G0 ➐ 21,173.80 300 JB9-190- - -TB300G0 ➐ 26,365.56 J 400 JB9-190- - -JF65G0 ➐ 27,030.88 K3 460 J7-85- - -G0 9,901.14 F 125 J7-85- - -TB125G0 12,034.05 S 200 J7-85- - -JF64G0 10,137.22 S 575 J7-72- - -G0 9,563.88 F 125 J7-72- - -TBH125G0 11,843.96 S 100 J7-72- - -JF63G0 9799.96 S 200 KA9-265- - -G0 ➐ 34,244.15 J 400 KA9-265- - -TB400G0 ➐ 44,066.6 K2 400 KA9-265- - -JF65G0 ➐ 40,310.75 K2 230 KB9-205- - -G0 ➐ 33,824.11 J 350 KB9-205- - -TB350G0 ➐ 44,179.02 K2 400 KB9-205- - -JF65G0 ➐ 40,981.18 K2 460 K7-97- - -G0 10,646.17 F 175 K7-97- - -TB175G0 ➏ 12,840.41 S 200 K7-97- - -JF64G0 13,319.73 575 K7-97- - -G0 10,646.17 F 150 K7-97- - -TBH150G0 ➏ 12,840.41 S 200 K7-97- - -JF64G0 13,319.73 200 LA9-305- - -G0 ➐ 37,797.65 J2 500 LA9-305- - -TB500G0 ➐ 48,607.34 K2 600 LA9-305- - -JF66G0 ➐ 52,912.01 K2 230 LB9-265- - -G0 ➐ 34,244.15 J 450 LB9-265- - -TB450G0 ➐ 44,649.14 K2 400 LB9-265- - -JF65G0 ➐ 40,310.75 K2 460 L9-146- - -G0 ➐ 15,829.76 225 L9-146- - -TBH225G0 ➐ 20,503.36 J 200 L9-146- - -JF64G0 ➐ 24,475.88 J 575 L9-116- - -G0 ➐ 13,646.77 H 200 L9-116- - -TBH200G0 ➐ 17,675.49 J 200 L9-116- - -JF64G0 ➐ 21,100.21 J 200 A9-370- - -G0 ➐ 43,467.70 J2 700 A9-370- - -TB700G0 ➐ 55,898.29 K2 600 A9-370- - -JF66G0 ➐ 60,848.86 K2 230 B9-305- - -G0 ➐ 37,797.65 J2 600 B9-305- - -TB600G0 ➐ 48,607.34 K2 600 B9-305- - -JF66G0 ➐ 52,912.01 K2 460 9-190- - -G0 ➐ 21,173.80 300 9-190- - -TB300G0 ➐ 26,365.56 J 400 9-190- - -JF65G0 ➐ 27,030.88 K3 575 9-146- - -G0 ➐ 15,829.76 225 9-146- - -TBH225G0 ➐ 20,503.36 J 200 9-146- - -JF64G0 ➐ 24,475.88 J Larger Horsepower ontinued On Next Page NOTE: atalog numbers and enclosure dimensions reflect contactors with A coils. For coils, select oil ode from the oil ode table on page 104 and follow the instructions for modifying catalog numbers. Ordering nstructions Specify atalog Number Replace ( ) with oil ode Factory odifications available See page 104 See pages 105-106 See pages 107-111 ➊ imensional information starts on page 122. ➋ For Non-fusible isconnect applications, replace the "JF" characters with "JU". Example: AATH7-72- - -JF63G0 becomes AATH7-72- - -JU63G0. ➌ Fuse clips sized for use with J -type fuses. ➍ Other enclosures available. ontact your Sprecher + Schuh Representative. ➎ A Red and Yellow Handle may be selected instead of the standard Gray and Black handle. hange JF to LF in catalog number. ➏ The short circuit and ka is relegated to the contactor s 10kA. ontact your Sprecher + Schuh representative for a higher ka. ➐ AT9-116 AT9-370 starters are available with E option for PL interface. hange catalog number to include -E. For example: AATGB9-116- - -G0 becomes AATGB9-116-E- - -G0. See page 104 for price adder. 88 iscount Schedule B7
Autotransformer - Series AAT Autotransformer 150 HP to 1000 HP (losed Transition - Type 1 General Purpose Enclosure) ➍ aximum H.P. 150 200 250 300 350 400 450 500 600 3 Ø Volts out Short ircuit Protection B Thermal agnetic ircuit Breaker (B) Fuse lip Fusible isconnect ➋➎ atalog No. Price ➊ atalog No. Price ➊ ➌ atalog No. Price ➊ AAT AAT AAT 200 NA9-460-E- - -G0 46,685.98 J2 800 NA9-460-E- - -TB800G0 62,212.21 R/F 800 NA9-460-E- - -JF67G0 62,611.81 ~ 230 NB9-370- - -G0 ➏ 43,467.70 J2 700 NB9-370- - -TB700G0 ➏ 55,898.29 K2 600 NB9-370- - -JF66G0 ➏ 60,848.86 K2 460 N9-205- - -G0 ➏ 33,824.11 350 N9-205- - -TB350G0 ➏ 44,179.02 J 400 N9-205- - -JF65G0 ➏ 40,981.18 K3 575 N9-190- - -G0 ➏ 21,173.8 300 N9-190- - -TB300G0 ➏ 26,365.56 J 400 N9-190- - -JF65G0 ➏ 27,030.88 K3 230 OB9-460-E- - -G0 46,685.98 ~ 1000 OB9-460-E- - -TB1000G0 62,212.21 ~ 800 OB9-460-E- - -JF67G0 62,611.81 ~ 460 O9-265- - -G0 ➏ 34,244.15 J 450 O9-265- - -TB450G0 ➏ 44,649.14 K2 400 O9-265- - -JF65G0 ➏ 40,310.75 K2 575 O9-205- - -G0 ➏ 33,824.11 J 350 O9-205- - -TB450G0 ➏ 44,179.02 K2 400 O9-205- - -JF65G0 ➏ 40,981.18 K3 230 PB9-580-E- - -G0 ~ Refer to Factory ~ Refer to Factory ~ 460 P9-305- - -G0 ➏ 37,797.65 J2 600 P9-305- - -TB600G0 ➏ 48,607.34 K2 600 P9-305- - -JF66G0 ➏ 52,912.01 K2 575 P9-265- - -G0 ➏ 34,244.15 J 450 P9-265- - -TB450G0 ➏ 44,649.14 K2 400 P9-265- - -JF65G0 ➏ 40,310.75 K2 230 QB9-750-E- - -G0 ~ Refer to Factory ~ Refer to Factory ~ 460 Q9-370- - -G0 ➏ 43,467.7 J2 700 Q9-370- - -TB700G0 ➏ 55,898.29 K2 600 Q9-370- - -JF66G0 ➏ 60,848.86 K2 575 Q9-305- - -G0 ➏ 37,797.65 J2 600 Q9-305- - -TB600G0 ➏ 48,607.34 K2 600 Q9-305- - -JF66G0 ➏ 52,912.01 K2 230 Refer to Factory ~ Refer to Factory ~ Refer to Factory ~ 460 R9-400-E- - -G0 38,583.57 J2 800 R9-400-E- - -TB800G0 51,414.78 RF 800 R9-400-E- - -JF67G0 51,744.88 ~ 575 R9-370- - -G0 ➏ 43,467.7 J2 600 R9-370- - -TB600G0 ➏ 55,898.29 K2 600 R9-370- - -JF66G0 ➏ 60,848.86 K2 230 Refer to Factory ~ Refer to Factory ~ Refer to Factory ~ 460 S9-460-E- - -G0 46,685.98 ~ 1000 S9-460-E- - -TB1000G0 62,212.21 ~ 800 S9-460-E- - -JF67G0 62,611.81 ~ 575 S9-400-E- - -G0 38,583.57 J2 700 S9-400-E- - -TB700G0 51,414.78 K2 600 S9-400-E- - -JF66G0 51,744.88 ~ 230 Refer to Factory ~ Refer to Factory ~ 460 T9-580-E- - -G0 60,692.49 ~ Refer to Factory ~ 575 T9-460-E- - -G0 46,685.98 ~ 800 T9-460-E- - -TB800G0 62,212.21 ~ 460 U9-580-E- - -G0 60,692.49 ~ Refer to Factory ~ 575 U9-460-E- - -G0 46,685.98 ~ 900 Refer to Factory ~ 460 U9-750-E- - -G0 79,507.51 ~ 575 U9-580-E- - -G0 60,692.49 ~ Refer to Factory ~ Refer to Factory Larger sizes available. ontact your Sprecher + Schuh representative. NOTE: atalog numbers and enclosure dimensions reflect contactors with A coils. For coils, select oil ode from the oil ode table on page 104 and follow the instructions for modifying catalog numbers. Ordering nstructions Specify atalog Number Replace ( ) with oil ode Factory odifications available See page 104 See pages 105-106 See pages 107-111 ➊ imensional information starts on page 122. ➋ For Non-fusible isconnect applications, replace the "JF" characters with "JU". Example: AATN9-205-E- - -JF65G0 becomes AATN9-205-E- - -JU65G0. ➌ Fuse clips sized for use with J -type fuses up to 600A. Power fuses not supplied. ➍ Other enclosures available. ontact your Sprecher + Schuh Representative. ➎ A Red and Yellow Handle may be selected instead of the standard Gray and Black handle. hange JF to LF in catalog number. ➏ AT9-116 AT9-370 starters are available with E option for PL interface. hange catalog number to include -E. For example: AATN9-190- - -G0 becomes AATN9-190-E- - -G0. See page 104 for price adder. iscount Schedule B7 89
Part Winding - Series APWT Part Winding (Two Step) aximum Horsepower Three Phase Type 1 General Purpose Type 12 [Type 3R ➋] ndustrial usttight Type 4 Type 4X orrosion Resist Non-metallic 200V 230V 460V 575V atalog No. Price ➊ atalog No. Price ➊ atalog No. Price ➊ atalog No. Price ➊ APWT APWT APWT APWT 10 15 30 30 7-30- - -G0 1,569.79 7-30- - -O 1,652.57 7-30- - -WO 2,024.58 7-30- - -O 2,024.58 U1 15 ~ 40 40 7-37- - -G0 1,818.14 7-37- - -O 1,899.90 7-37- - -WO 2,603.03 7-37- - -O 2,603.03 U1 20 20 50 50 7-43- - -G0 2,106.34 7-43- - -O 2,190.15 7-43- - -WO 2,975.04 7-43- - -O 2,975.04 U1 25 25 60 60 7-55- - -G0 2,179.93 7-55- - -O 2,262.71 7-55- - -WO 3,047.60 7-55- - -O 3,047.60 U1 25 30 60 75 7-60- - -G0 2,395.57 7-60- - -O 2,478.35 O 7-60- - -WO 3,296.97 O 7-60- - -O 3,296.97 V1 30 40 75 100 7-72- - -G0 2,561.13 7-72- - -O 2,643.91 O 7-72- - -WO 3,552.47 O 7-72- - -O 3,552.47 V1 40 50 100 125 7-85- - -G0 3,305.15 7-85- - -O 3,386.91 O 7-85- - -WO 4,288.31 O 7-85- - -O 4,288.31 V1 50 50 100 150 7-97- - -G0 3,482.98 7-97- - -O 3,565.76 O 7-97- - -WO 4,467.16 O 7-97- - -O 4,467.16 V1 60 60 100 150 9-116- - -G0 ➍ 5,546.39 E2 9-116- - -0 ➍ 7,253.13 R2 9-116- - -W0 ➍ 8,516.33 R2 9-116- - -0 ➍ 8,516.33 W2 60 75 150 200 9-146- - -G0 ➍ 6,433.49 G 9-146- - -0 ➍ 8,414.13 T 9-146- - -W0 ➍ 9,878.65 T 9-146- - -0 ➍ 9,878.65 A2 75 75 200 200 9-190- - -G0 ➍ 8,354.85 H 9-190- - -0 ➍ 9,114.20 H 9-190- - -W0 ➍ 12,143.40 H 9-190- - -0 ➍ 12,143.40 Y1 75 100 200 300 9-205- - -G0 ➍ 13,906.35 H 9-205- - -0 ➍ 14,734.17 H 9-205- - -W0 ➍ 17,383.20 H 9-205- - -0 ➍ 17,383.20 Y1 100 150 300 350 9-265- - -G0 ➍ 14,917.11 J 9-265- - -0 ➍ 15,702.01 J 9-265- - -W0 ➍ 17,664.25 J 9-265- - -0 ➍ 17,664.25 Z1 150 200 350 450 9-305- - -G0 ➍ 18,253.94 J 9-305- - -0 ➍ 19,104.25 J 9-305- - -W0 ➍ 19,364.86 J 9-305- - -0 ➍ 19,364.86 Z1 Larger sizes available. ontact your Sprecher + Schuh representative. NOTE: atalog numbers and enclosure dimensions reflect contactors with A coils. For coils, select oil ode from the oil ode table on page 104 and follow the instructions for modifying catalog numbers. ombination Part Winding Starter Options hart ➌ ircuit Breaker or isconnect Switch Thermal agnetic ircuit Breaker Non Fusible isconnect Fusible isconnect - 30 Amp Fusible isconnect - 60 Amp Fusible isconnect - 100 Amp Fusible isconnect - 200 Amp Fusible isconnect - 400 Amp Fusible isconnect - 600 Amp Price (Add to base Part Winding starter list price) 7-60 Enclosure 7-37 7-72 9-190(-E) 7-43 7-85 9-116 (-E) 9-205(-E) Type 7-30 7-55 7-97 9-146 (-E) 9-265(-E) Type 1 1177.34 1280.57 2341.40 4554.03 6703.30 Type 12/3R/4/4X 1232.53 1376.63 3163.09 5211.18 7217.36 Type 1 821.69 1040.40 1437.95 2574.42 5909.20 Type 12/3R/4/4X 876.88 1136.46 2314.83 2848.31 6423.27 Type 1 931.04 ~ ~ ~ ~ Type 12/3R/4/4X 1019.96 ~ ~ ~ ~ Type 1 1075.14 1123.18 ~ ~ ~ Type 12/3R/4/4X 1219.25 1219.25 ~ ~ ~ Type 1 ~ 1430.80 1739.44 ~ ~ Type 12/3R/4/4X ~ 1889.68 2561.13 ~ ~ Type 1 ~ ~ 2478.35 2820.72 ~ Type 12/3R/4/4X ~ ~ 2670.49 3094.62 ~ Type 1 ~ ~ ~ 3786.51 6634.82 Type 12/3R/4/4X ~ ~ ~ 4060.41 7148.89 Type 1 ~ ~ ~ ~ 7415.63 Type 12/3R/4/4X ~ ~ ~ ~ 8442.74 9-305(-E) ontact factory for pricing. Ordering nstructions Specify atalog Number Replace ( ) with oil ode ultiply otor FLA by 50%, Factory odifications available See page 104 See pages 105-106 See pages 107-111 ➊ imensional information starts on page 122. ➋ For Type 3R outdoor applications, replace "" in catalog number with an "R". Price remains the same, dimensions may change. Example: APWT7-30- - -0 becomes APWT7-30- - -R0. ➌ Refer to pages 4-5 for information on modifying standard Part Winding catalog number to combination type or contact Sprecher + Schuh Technical Support. ➍ AT9-116 AT9-370 starters are available with E option for PL interface. hange catalog number to include -E. For example: AATN9-190- - -G0 becomes AATN9-190-E- - -G0. See page 104 for price adder. 90 iscount Schedule B7
Wye elta - Series AYT Wye elta (Open Transition, 3-ontactor ➍) aximum Horsepower Three Phase Type 1 General Purpose Type 12 [Type 3R ➋] ndustrial usttight Type 4 Type 4X orrosion Resistant Non-metallic 200V 230V 460V 575V atalog No. Price ➊ atalog No. Price ➊ atalog No. Price ➊ atalog No. Price ➊ AYT AYT AYT AYT 10 15 30 30 7-30- - -G0 1,487.01 7-30- - -O 1,528.91 O 7-30- - -WO 1,982.68 O 7-30- - -O 1,982.68 V1 15 20 40 40 7-37- - -G0 2,190.15 7-37- - -O 2,230.00 O 7-37- - -WO 2,685.82 O 7-37- - -O 2,643.91 V1 20 25 50 50 7-43- - -G0 2,395.57 7-43- - -O 2,437.47 O 7-43- - -WO 2,891.24 O 7-43- - -O 2,891.24 V1 25 30 60 60 7-55- - -G0 2,505.94 7-55- - -O 2,546.82 O 7-55- - -WO 3,001.61 O 7-55- - -O 3,001.61 V1 30 40 75 75 7-60- - -G0 2,817.65 7-60- - -O 3,155.94 Q 7-60- - -WO 3,609.70 Q 7-60- - -O 3,155.94 W1 40 50 100 100 7-72- - -G0 3,320.48 F 7-72- - -O 4,064.49 T 7-72- - -WO 4,560.16 T 7-72- - -O 5,799.85 X1 50 60 125 125 7-85- - -G0 3,651.61 F 7-85- - -O 4394.60 T 7-85- - -WO 4,973.05 T 7-85- - -O 6,129.96 X1 60 60 150 150 9-116- - -G0 4,693.02 G 9-116- - -0 5,290.89 T 9-116- - -W0 5,463.61 T 9-116- - -0 9650.75 A2 75 75 150 200 9-146- - -G0 5,444.19 G 9-146- - -0 6,137.11 T 9-146- - -W0 7,522.94 T 9-146- - -0 11,194.99 A2 75 100 200 250 9-190- - -G0 8,354.85 H 9-190- - -0 8,810.66 H 9-190- - -W0 10,329.35 H 9-190- - -0 12,266.04 Y1 100 125 250 300 9-205- - -G0 13,492.44 9-205- - -0 13,658.01 9-205- - -W0 14,552.26 J 9-205- - -0 16,737.29 Z1 150 150 350 450 9-265- - -G0 14,523.64 J 9-265- - -0 14,681.03 J 9-265- - -W0 14,917.11 J 9-265- - -0 16,627.94 Z1 150 200 450 500 9-305- - -G0 15,792.97 J 9-305- - -0 15,951.38 J 9-305- - -W0 17,351.52 J 9-305- - -0 17,856.38 Z1 200 250 500 600 9-370- - -G0 18,161.96 J 9-370- - -0 18,343.88 J 9-370- - -W0 19,954.55 J 9-370- - -0 20,535.05 Z1 250 250 600 700 9-400-E- - -G0 18,662.74 ~ 9-400-E- - -0 18,801.73 ~ 9-400-E- - -W0 22,215.21 ~ 9-400-E- - -0 20,640.31 ~ 300 350 700 800 9-460-E- - -G0 22,582.11 ~ 9-460-E- - -0 22,749.72 ~ 9-460-E- - -W0 26,880.64 ~ 9-460-E- - -0 24,974.61 ~ 350 450 800 1000 9-580-E- - -G0 29,356.95 ~ 9-580-E- - -0 29,574.64 ~ 9-580-E- - -W0 34,945.25 ~ 9-580-E- - -0 32,466.9 ~ 450 500 1000 1250 9-750-E- - -G0 38,457.86 ~ 9-750-E- - -0 38,743.00 ~ 9-750-E- - -W0 45,777.42 ~ 9-750-E- - -0 42,531.55 ~ 600 700 1250 1750 9-860-E- - -G0 51,918.62 ~ 9-860-E- - -0 52,302.89 ~ 9-860-E- - -W0 61,800.34 ~ 9-860-E- - -0 57,418.00 ~ 600 700 1500 1750 9-1060-E- - -G0 58,148.73 ~ 9-1060-E- - -0 58,579.00 ~ 9-1060-E- - -W0 69,215.97 ~ 9-1060-E- - -0 64,307.31 ~ Larger sizes available. ontact your Sprecher + Schuh representative. ombination Wye elta Starter Options hart ➌ ircuit Breaker or isconnect Switch Thermal agnetic ircuit Breaker Non Fusible isconnect Fusible isconnect - 30 Amp Fusible isconnect - 60 Amp Fusible isconnect - 100 Amp Fusible isconnect - 200 Amp Fusible isconnect - 400 Amp Fusible isconnect - 600 Amp Price (Add to base Part Winding starter list price) 9-305(-E) 7-37 7-60 9-190(-E) 9-370(-E) Enclosure 7-43 7-72 9-116 (-E) 9-205(-E) 9-400-E Type 7-30 7-55 7-85 9-146 (-E) 9-265(-E) 9-460-E Type 1 1177.34 1280.57 2341.40 4554.03 6703.30 9202.02 Type 12/3R/4/4X 1232.53 1376.63 3163.09 5211.18 7217.36 9805.07 Type 1 821.69 1040.40 1437.95 2574.42 5909.20 6251.57 Type 12/3R/4/4X 876.88 1136.46 2314.83 2848.31 6423.27 6765.64 Type 1 876.88 ~ ~ ~ ~ ~ Type 12/3R/4/4X 931.04 ~ ~ ~ ~ ~ Type 1 1123.18 1123.18 ~ ~ ~ ~ Type 12/3R/4/4X 1219.25 1219.25 ~ ~ ~ ~ Type 1 ~ 1739.44 1739.44 ~ ~ ~ Type 12/3R/4/4X ~ 2561.13 2561.13 ~ ~ ~ Type 1 ~ ~ 2820.72 2820.72 ~ ~ Type 12/3R/4/4X ~ ~ 3094.62 3094.62 ~ ~ Type 1 ~ ~ ~ 6634.82 6634.82 ~ Type 12/3R/4/4X ~ ~ ~ 7148.89 7148.89 ~ Type 1 ~ ~ ~ ~ 6977.19 6977.19 Type 12/3R/4/4X ~ ~ ~ ~ 7319.56 7319.56 9-580-E 9-750-E 9-860-E 9-1060-E ontact factory for pricing. Ordering nstructions Specify atalog Number Replace ( ) with oil ode ultiply otor FLA by 58%, Factory odifications available See page 104 See pages 105-106 See pages 107-111 ➊ imensional information starts on page 122. ➋ For Type 3R outdoor applications, replace "" in catalog number with an "R". imensions may change. For example number AYT7-30- - -0 becomes AYT7-30- - -R0. Price remains the same. ➌ Refer to pages 4-5 for information on modifying standard Wye elta catalog number to combination type or contact Sprecher + Schuh Technical Support. ➍ For closed transition Wye elta applications, please contact factory. iscount Schedule B7 91