Vied Technologies. Residential Survey Drafting Services. Quality Guaranteed. Benefits Why Choose Us?

Similar documents
SECTION SITE SURVEYS

Date Requested, 200_ Work Order No. Funding source Name of project Project limits: Purpose of the project

SITE PLAN, SUBDIVISION & EXTERIOR DESIGN REVIEW PROCESS

1. Land survey Work. 2. Civil and Structural engineering services.

CITY OF EL MIRAGE DEVELOPMENT APPLICATION PROCESS

CITY OF EL MIRAGE DEVELOPMENT APPLICATION PROCESS

DEPARTMENT OF COMMUNITY DEVELOPMENT SITE PLAN INFORMATION

WILTON MANORS, Island City 2020 WILTON DRIVE, WILTON MANORS, FLORIDA 33305

Recommended Changes to the Public Hearing Draft Zoning Ordinance

Section E NSPS MODEL STANDARDS FOR TOPOGRAPHIC SURVEYS Approved 3/12/02

Oakland County Michigan Register of Deeds Plat Engineering, GIS, & Remonumentation Dept. Ph: (248) Fax (248)

SUMMIT COUNTY PLANNING AND ENGINEERING DEPARTMENT

Alabama Standards of Practice for Surveying

SITE PLAN Application Packet (Required For All Non-Residential Development Projects)

Site Plans. City of Hopkins Inspections Division st Street South, Hopkins, MN Fax

Town of Mount Pleasant PRELIMINARY Design Review Submittal Check List June 1, 2014

b. Building Areas or Building Pads having an average grade steeper than 5% (some elevation information may be required to verify grade).

APPENDIX K DEPARTMENT OF PLANNING AND CODE ENFORCEMENT SUBDIVISION APPLICATION CENTER SUBMITTAL CHECKLIST

SUBDIVISION PLAT APPLICATION

CHECKLIST PRELIMINARY SUBDIVISION AND PRELIMINARY SITE PLAN

North Carolina No-Rise Guidance Document

Chemionix Solutions. Outsourcing. Engineering. Drafting


NEW SINGLE FAMILY HOMES

Minor Site Plan Application and Checklist Land Disturbing Activities

MINOR SUBDIVISION. [ ] [ ] [ ] [ ] B. Dimensions, bearings and curve data for all property lines and easements.

Attachment A HERON RIDGE ESTATES RESIDENTIAL NEIGHBORHOODS PROCEDURE FOR OBTAINING DESIGN COMMITTEE APPROVAL

LOWNDES COUNTY ENGINEERING PLAN REVIEW CHECKLIST. Design Professional: Phone: Developer: Phone: 2 nd Submittal (No Fee)

Porter County Plan Commission

Survey Requirements. Design Guidelines and Standards. June Office of the University Architect

SITE PLAN APPLICATION

Example Plans: Business Signs (Not For Construction)

Applying for a Site Development Review

The Bluffs at Eagle. Design Review Application. Date Bluffs Lot Number Street Address. Address. and/or fax. Address. Owner (if different) Phone

CHECKLIST THE FOLLOWING INFORMATION AND DOCUMENTATION MUST BE SUBMITTED TO DEVELOPMENT SERVICES BEFORE YOUR APPLICATION CAN BE PROCESSED.

PRELIMINARY PLAT CHECK LIST

12 STEPS TO SHOWING IMPROVEMENTS ON A PLAT

Checklist for Minor Plan Modification

B.2 MAJOR SUBDIVISION PRELIMINARY PLAN CHECKLIST

Legal Description & Site Plan Requirements and Layouts

City of Lompoc Building & Safety Services Section 100 Civic Center Plaza Lompoc, CA Phone: Fax:

CITY OF DES MOINES, IA PERMIT AND DEVELOPMENT CENTER 602 Robert D Ray Drive Des Moines, IA Phone:

DEVELOPMENT REVIEW COMMENTS LAND DISTURBANCE PERMIT (LDP) CLEARING CLEARING & GRUBBING GRADING. Date Reviewed by. Project Name

Community & Economic Development Department Planning Division Frederick Street PO Box 8805 Moreno Valley, CA SUBMITAL REQUIREMENTS

VARIANCE APPLICATION (NO SITE PLAN OR SUBDIVISION)

Traffic and Roadway Improvements - Rte 123 (Belmont Street) Brockton, MA Client: BETA Group, Inc.

Checklist for Tentative Subdivision Map

APPLICATION FOR SITE PLAN REVIEW

TOWN OF DOUGLAS EARTH REMOVAL SPECIAL PERMIT APPLICATION FORM Pursuant to Section 6.1 of the Douglas Zoning Bylaw

Create styles that control the display of Civil 3D objects. Copy styles from one drawing to another drawing.

Surveying & Measurement. Detail Survey Topographic Surveying

TOWN OF NORTH BRANFORD

CHAPTER 11 PRELIMINARY SITE PLAN APPROVAL PROCESS

Site Plan/Building Permit Review

MINIMUM DRAWING REQUIREMENTS FOR WATER AND SEWER LINE PROJECTS

City of Palmetto Florida

SUBMITTAL REQUIREMENTS RCV D REJECT PENDING

CITY OF LOMPOC DEVELOPMENT ASSISTANCE BROCHURE ENCROACHMENT PERMITS AND PUBLIC IMPROVEMENT PLANS

OVER-HEIGHT FENCE/RETAINING WALL CERTIFICATION APPLICATION

DESIGN REVIEW PROCESS AND APPLICATION

Architectural Design Process

NEW DELHI KS Design Broucher for print1.indd 1 3/29/ :15:14 AM

Design Technology Architectural Design 2 The second in a sequence of courses that prepares individuals with knowledge of residential architectural

Planning Permit Application LAND USE PRELIMINARY APPLICATION (LUP)

ARCHITECTURAL DESIGN II (544)

P.L. 1999, CHAPTER 258, approved October 15, 1999 Assembly, No (First Reprint)

INTENT An Administrative Site Plan is required for the following situations, excluding single-family detached development:

Conceptual, Preliminary and Final Site Plan Review in Holladay City

MULTIPLE-FAMILY DESIGN REVIEW SUBMITTAL CHECKLIST

AREA MEASUREMENT REPORT (RICS Code of Measuring Practice) 1 BERRY PLACE LONDON EC1V

Washington County Road Engineering Plan Submittal/Review Checklist

Article 4 PROCEDURES for PLOT PLAN and SITE PLAN REVIEW

Last Name: First Name: M.I:

Houston Community College System

Addenco ENERGY & COMMODITIES LAW FIRM. AddVANTE. ABOUT ADDENCO Who we are What we do Our clients Our group OUR SERVICES

TLC ENGINE. Our complete Digital Change Management platform. Training. Testing. Certification. Compliance. Communication

ARCHITECTURAL REVIEW COMMITTEE HOMESITE CONSTRUCTION SUBMITTAL FORM AND APPLICATION

CHAPTER 11. Plan Standards

BUILDING PLANS. BUILDING INSPECTIONS DEPARTMENT

RESIDENTIAL DEMOLITION PERMIT APPLICANT CHECKLIST

COUNTY OF CLEVELAND, NORTH CAROLINA AGENDA FOR THE PLANNING BOARD MEETING. July 31, :00 PM. Commissioners Chamber

Town of Apex, North Carolina

King And Queen County, VA P.O. Box 177 King and Queen Courthouse, VA (804) (804) (fax)

Company Profile. Introduction. Contents. Orbitcad.com since 2009 Providing AutoCAD & Revit Support to Clients Globally

Integrating Survey, CAD and GIS into a Single Solution

Research about Technological Innovation with Deep Civil-Military Integration

DEVELOPMENT SERVICES SITE PLAN SUBMITTAL 2.2.3

OAK RUN BUILDING PERMIT

Testing, Expertise, Innovation

Preparing for a Career in Architecture

COURSE SYLLABUS SURVEYING I

SECTION 35 ANTENNAS AND TOWERS

City of Beaumont. Public Works Engineering. Street Improvement Plan Checklist REV 4/18/16

Minor Site Plan Review Process

Taking a broader view

FIT-OUT PERMIT REQUEST (GENERAL WORKS)

Rezoning Application for Planning Commission

CITY OF MERCER ISLAND DEVELOPMENT SERVICES GROUP 9611 SE 36 th Street, Mercer Island, WA (206)

The CAD Technician s Role in Office Practice and Procedure

City of Hamilton INFORMATION FOR CONDITIONAL USE PERMIT

Transcription:

Let experience be your guide Vied Technologies Residential Survey Drafting Services Need CAD support for your Residential Survey Drafting? Viedtech offers highest quality CAD drafting services at affordable prices. Hire our expert CAD services to complete your survey drafting. Boundary Survey Title Survey Survey CAD Drafting Topo Graphic Survey Platting Survey About Vied Technologies ISO 9001: 2008 Certified Quality Guaranteed Lot Staking Form Survey Plot Plans Final Survey Our Resources Your Results About Compliance Vied Technologies Benefits Why Choose Us? Incorporated in 2006, Headquartered in Chantilly, VA. We are a CAD Outsourcing Company, Offering reliable and affordable CAD outsourcing services with an unmatched level of flexibility Our mission is our client's success, by providing CAD Drafting Services of highest standards to companies across the globe while maintaining high levels of customer satisfaction and profitability We are a young team of passionate Civil Engineers with experience working on US-based civil engineering drafting projects Top Professionals at work, we always employ the best draftsmen and CAD engineers in the region after thoroughly screening them for their skills Using state of the art technologies and software tools to produce detailed and high quality outputs Our in-house Quality Assurance procedures ensure all drawing packages are competently checked prior to delivery. Time is valuable to us, we always meet the deadline and even beat it on several occasions Our pricing is very competitive and in sync with the prevalent rates in the global market

Residential Survey CAD Drafting Sample Work Boundary survey is a process carried out to determine property lines and define true property corners of a parcel of land described in a deed A boundary survey indicates the extent of any easements or encroachments and may show the limitations imposed on the property. Kindly refer our sample work on Boundary Survey A Topographic survey is a survey that configures the Natural and artificial features (trees, fences, building foot prints, roads, fences) and elevations of the land. A topographic survey shows the location, size, and height of the feature as well as gradual changes or contours in elevation. Kindly refer our sample work on Topographic Survey

A Lot Survey provides all corners and property lines of the subject property. It gives assurance of the property represented by the seller to the lender and buyer Kindly refer our Sample work on Lot Survey A Plot Plan shows the buildings, position of roads, utility runs and other constructions of an existing or proposed project site at a defined scale. Plot plan provides the lot dimensions to put the improvements on the lot, the setback lines and easements. Kindly refer our Sample work on Plot Plan

A Mortgage survey is the most widely used survey that would be required on a piece of property which is required for purchase. A physical inspection generally focuses on the condition of the building; a mortgage survey investigates the property itself. Most of the financing companies would require a valid mortgage survey for purchase of the property by the buyer. The cost of survey may be covered by most Kindly refer our Sample work on Plot Plan Final Survey - A survey performed upon completion of a new construction or extension to show and verify the improvements on a property. A final survey is a required item for: Department of Buildings in the process of getting a Certificate of Occupancy Kindly refer our Sample work on Final Survey

How outsourced survey drafting services can make a significant difference to land surveying firms? We are a reliable and affordable CAD DRAFTING SERVICES company and look forward to partnering with you to INCREASE EFFICIENCY & PROFITABILITY of your business. So, thinking of lowering your operating costs and improving your bottom line, get associated with us and experience the difference...! Contact Us Email: ven.behara@viedtech.com Phone : +1 (703) 337 0806 Vied Technologies Inc. 3931 Avion Park Court, Suite C116-223 Chantilly, VA 20151