CPC14N 1V Normally-Open Single-Pole 4-Pin SOP OptoMOS Relay Parameter Rating Units Blocking Voltage 1 V P Load Current 3 ma DC On-Resistance (max) 4 Features Operating Temperature Range: -4ºC to +11ºC 1V rms Input/Output Isolation Small 4-Pin SOP Package Low Drive Power Requirements High Reliability Arc-Free With No Snubbing Circuits No EMI/RFI Generation Tape & Reel Version Available Flammability Rating UL 94 V- Description CPC14N is a miniature, low-voltage, low on-resistance, normally-open (1-Form-A) DC solid state relay in a 4-pin SOP package. The relay uses optically coupled MOSFET technology to provide 1V rms of input to output isolation. The efficient MOSFET switch and photovoltaic die use IXYS Integrated Circuits' patented OptoMOS architecture while the optically coupled output is controlled by a highly efficient infrared LED. The CPC14N uses IXYS Integrated Circuits' state of the art double-molded vertical construction packaging to produce one of the world s smallest relays. The CPC14N is ideal for replacing larger, less-reliable reed and electromechanical relays. Applications Instrumentation Multiplexers Data Acquisition Electronic Switching I/O Subsystems Meters (Watt-Hour, Water, Gas) Medical Equipment Patient/Equipment Isolation Security Systems Aerospace Industrial Controls Reed Relay Replacement Approvals UL Recognized Component: File E7627 CSA Certified Component: Certificate 11727 EN/IEC 69-1 Certified Component: Certificate available on our website Ordering Information Part # CPC14N CPC14NTR Pin Configuration Description 4-Pin SOP (1/tube) 4-Pin SOP (2/reel) 1 + Control 4 DC + 2 3 Control DC - Switching Characteristics of Normally-Open Devices Form-A 9% 1% I LOAD t on t off DS-CPC14N-R9 www.ixysic.com 1
CPC14N Absolute Maximum Ratings @ 2ºC Parameter Ratings Units Blocking Voltage 1 V P Reverse Input Voltage V Input Control Current Peak (1ms) ma 1 A Input Power Dissipation 1 7 mw Total Power Dissipation 2 4 mw Capacitance Input to Output 1 pf Isolation Voltage, Input to Output 1 V rms Operational Temperature -4 to +11 C Storage Temperature -4 to +12 C 1 Derate linearly 1.33 mw / ºC Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Typical values are characteristic of the device at +2 C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements. 2 Derate linearly 3.33 mw / ºC Electrical Characteristics @ 2 C (Unless Otherwise Specified) Parameter Conditions Symbol Min Typ Max Units Output Characteristics Load Current Continuous 1 - - - 3 I Continuous T=11 C, I L F =1mA - - 1 ma DC Peak t=1ms I LPK - - On-Resistance 2 I L =3mA R ON - - 4 Off-State Leakage Current V L =1V P I LEAK - - 1 µa Switching Speeds Turn-On t =ma, V L =1V on - - 3 Turn-Off t off - - 1 ms Output Capacitance =ma, V L =V, f=1mhz C OUT - 2 - pf Input Characteristics Input Control Current to Activate I L =3mA -.9 2 ma Input Control Current to Deactivate -.3.8 - ma Input Voltage Drop =ma V F.9 1.2 1. V Reverse Input Current V R =V I R - - 1 µa 1 Load current derates linearly from 3mA @ 2 o C to 1mA @ 11 o C. 2 Measurement taken within 1 second of on-time. 2 www.ixysic.com R9
CPC14N PERFORMANCE DATA* 3 Typical LED Forward Voltage Drop (N=, =ma) 2 Typical for Switch Operation (N=, I L =3mA) 2 Typical for Switch Dropout (N=, I L =3mA) 3 2 2 1 1 2 1 1 2 1 1 1.17 1.19 1.21 1.23 1.2 LED Forward Voltage Drop (V).7.7.8.8.9.9 1..7.8.8.9.9 1. 1. 3 Typical On-Resistance Distribution (N=, =2mA, I L =3mA) 2 Typical Turn-On Time (N=, =ma, I L =3mA) 2 Typical Turn-Off Time (N=, =ma, I L =2mA) 3 2 2 1 1 2 1 1 2 1 1 2.9 3. 3.1 3.2 3.3 3.4 3. On-Resistance ( ).2.3.3.4.4.. Turn-On Time (ms).21.22.23.24.2.26.27 Turn-Off Time (ms) 3 3 Typical Blocking Voltage Distribution (N=) 2 2 1 1 16 19 112 11 118 121 124 Blocking Voltage (V P ) 1.8 Typical LED Forward Voltage Drop 3. Typical for Switch Operation =1mA) 3. Typical for Switch Dropout =1mA) LED Forward Voltage Drop (V) 1.6 1.4 1.2 1. =ma =1mA =ma.8-4 -2 2 4 6 8 1 12 2. 2. 1. 1.. -4-2 2 4 6 8 1 2. 2. 1. 1.. -4-2 2 4 6 8 1 *Unless otherwise noted, data presented in these graphs is typical of device operation at 2ºC. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. R9 www.ixysic.com 3
CPC14N PERFORMANCE DATA* Load Current (ma) 3 2 1-1 -2 Typical Load Current vs. Load Voltage ( =ma) -3-1. -1. -.. 1. 1. Load Voltage (V) Turn-On Time (ms) Turn-On Time vs. LED Forward Current =1mA) 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 1 1 2 2 3 3 4 4 LED Forward Current (ma) Turn-Off Time (ms) Turn-Off Time vs. LED Forward Current =1mA).7.6..4.3.2.1 1 1 2 2 3 3 4 4 LED Forward Current (ma) On-Resistance ( ) Typical On-Resistance =3mA) 12 1 = ma 8 6 = 1mA 4 2-4 -2 2 4 6 8 1 11 Turn-On Time (ms). 4. 4. 3. 3. 2. 2. 1. 1.. -4 Typical Turn-On Time =2mA) =ma =1mA -2 2 4 6 8 1 Turn-Off Time (ms) 1..9.8.7.6..4.3.2.1-4 Typical Turn-Off Time =3mA) =1mA =ma -2 2 4 6 8 1 Load Current (ma) Typical Maximum Load Current 4 4 3 3 2 2 1 1 F =1mA -4-2 2 4 6 8 1 12 I =ma Blocking Voltage (V P ) 122 121 12 119 118 117 116 11-4 Typical Blocking Voltage -2 2 4 6 8 1 Leakage ( A).16.14.12.1.8.6.4.2-4 Typical Leakage Measured Across Pins 3 & 4 (V L =1V) -2 2 4 6 8 1 Load Current (A) Energy Rating Curve 1..9.8.7.6..4.3.2.1 1μs 1μs 1ms 1ms 1ms 1s 1s 1s Time *Unless otherwise noted, data presented in these graphs is typical of device operation at 2ºC. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. 4 www.ixysic.com R9
CPC14N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-2, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-33. Device Moisture Sensitivity Level (MSL) Classification CPC14N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-62. Soldering Profile Provided in the table below is the Classification Temperature (T C ) of this product and the maximum dwell time the body temperature of this device may be (T C - )ºC or greater. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other processes, the guidelines of J-STD-2 must be observed. Board Wash Device Classification Temperature (T c ) Dwell Time (t p ) Max Reflow Cycles CPC14N 26ºC 3 seconds 3 IXYS Integrated Circuits recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based. R9 www.ixysic.com
CPC14N MECHANICAL DIMENSIONS CPC14N 4.89 ±.2 (.161 ±.1).23 ±.2 (.8 ±.1) Recommended PCB Land Pattern.6 (.24) 3.81 ±.2 (.1 ±.1) Pin 1 2.4 Typ (.1 Typ) 2.3±.2 (.8±.1).481 (.19) -.1 (-.4) 6.96 ±.12 (.24 ±.4) Package standoff:.64 ±.4 (.2 ±.1).381 ±.2 (.1 ±.1).91 ±.2 (.36 ±.1).9 ±.127 (.22 ±.) Dimensions mm (inches) 1.4 (.61) 2.4 (.1) 3.8 (.12) Note: 1. Lead dimensions do not include plating: 1 microinches max. CPC14NTR Tape & Reel 33.2 Dia (13. Dia) Top Cover Tape Thickness.12 Max (.4 Max) B =4.7 (.18) W=12. (.472) K =2.7 (.16) K 1 =2.3 (.91) A =6. (.26) P1=8. (.31) User Direction of Feed Embossed Carrier Dimensions mm (inches) Embossment NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits' Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC14N-R9 Copyright 218, IXYS Integrated Circuits OptoMOS is a registered trademark of IXYS Integrated Circuits All rights reserved. Printed in USA. 6/1/218