TOP IR LED High Performance Infrared TOP IR LED consists of an AlGaAs LED mounted on the lead frame as TOP LED package and is mw typical of output power. It emits a spectral band of radiation at 88nm. Outer Dimension (Unit:mm) <Specifications> 1. Product Name: TOP IR LED. Type Number:. Chip: - Chip Material: AlGaAs(DDH) - Dimension: 0.mm x 0.mm - Peak Wavelength: 88nm.Package - Lead Frame Die: Silver Plated - Package Resin: PPA Resin - Lens: Epoxy Resin Absolute Maximum Ratings [Tc= ] Item Symbol Value Unit Power Dissipation PD 10 mw Forward Current IF ma Pulse Forward Current* IFP 0 ma Reverse Voltage VR V Thermal Resistance Rthja 80 K/W Junction Temperature Tj Operating Temperature TOPR -0 ~ + Storage Temperature TSTG -0 ~ + Soldering Temperature** TSOL 0 * Duty=1% and Pulse Width=us. **Soldering condition must be completed within seconds at 0. Electro-Optical Characteristics[Tc= ] Item Symbol Condition Min Typ Max Unit VF IF=0mA 1. 1. Forward Voltage V VFP IPF=1A. IF=0mA Total Radiated Power* PO mw IPF=1A 70 Radiant Intensity** IE IF=0mA IPF=1A 0 mw/sr Peak Wavelength λp IF=0mA 87 89 nm Half Width λ IF=0mA 7 nm Viewing Half Angle θ1/ IF=0mA ± deg Rise Time tr IF=0mA ns Fall Time tf IF=0mA 1 ns * Measured by S8-08. ** Measured by CIE17-007 Condition B. Marubeni America Corporation 9 Freedom Circle, Suite 0, Santa Clara, CA90 Email: sales@tech-led.com URL: www.tech-led.com
Typical Characteristic Curves Forward Current - Forward Voltage (ta= C, tw=µs, Duty=1%) Relative Radiant Intensity - Forward Current (ta= C, tw=µs, Duty=1%) Forward Current (ma) 1 1 0mA Standard 0 0.8 1. 1..0..8. Forward Voltage (V). 0.01 1 8 8 8 0 Forward Current (ma) Forward Current Ifp [ma] 1 Forward Current - Pulse Duration khz 0 1 Duration tw [µs] 1kHz Hz Hz Allowable Forward Current(mA) 1 90 80 70 0 0 0 0 0 Allowable Forward Current - Ambient Temperature Rthja=80K/W 0 0 0 0 0 80 Marubeni America Corporation 9 Freedom Circle, Suite 0, Santa Clara, CA90 Tel: 08-0-00 Fax: 08-0-0 Email: sales@tech-led.com
Forward Voltage (V).0 1.9 1.8 1.7 1. 1. 1. 1. 1. 1.1 Forward Voltage - Ambient Temperture If=0mA 9 8 7 1 9 8 7 Relative Radiant Intensity - Ambient Temperature If=0mA 1.0 0 0 0 0 80 0 0 0 0 80 90 90 Peak Wavelength - Ambient Temperature If=0mA Peak Wavelength (nm) 9 900 890 880 870 80 80 80 80 0 0 0 0 80 Marubeni America Corporation 9 Freedom Circle, Suite 0, Santa Clara, CA90 Tel: 08-0-00 Fax: 08-0-0 Email: sales@tech-led.com
Relative Spectral Emission Radiation Characteristics 1.0 1.0 0.9 0.8 0.7 0. 0. 0. 0. 0. (ta= C) 0.9 0.8 0.7 0. 0. 0. 0. 0. ± 0.0 800 80 900 Wavelength (nm) 90-90 -0-0 0 0 0 90 Angle (deg.) Radiation Characteristics A0 A0 A0 A 0 0 0 0 ± Angle (deg.) A70 A0 A0 0 0 70 A80 80 A90 1 0.9 0.8 0.7 0. 0. 0. 0. 0. 0 0. 0. 0. 0. 0. 0.7 0.8 0.9 1 90 Marubeni America Corporation 9 Freedom Circle, Suite 0, Santa Clara, CA90 Tel: 08-0-00 Fax: 08-0-0 Email: sales@tech-led.com
Wrapping Moisture barrier bag aluminum laminated film with a desiccant to keep out the moisture absorption during the transportation and storage. SMD LED storage and handling precautions Storage Conditions before Opening a Moisture-Barrier Aluminum Bag Before opening a moisture-barrier aluminum bag, please store it at <0ºC, <0%RH. Please note that the maximum shelf life is 1 months under these conditions. Storage Conditions after Opening a Moisture-Barrier Aluminum Bag After opening a moisture-barrier aluminum bag, store the aluminum bag and silica gel in a desiccator. After opening the bag, please solder the LEDs within 7 hours in a room with - 0ºC, <0%RH. Please put any unused, remaining LEDs and silica gel back in the same aluminum bag and then vacuum-seal the bag. It is recommended to keep the re-sealed bag in a desiccator at <0%RH. The 7-hour- long floor life does not include the time while LEDs are stored in the moisture-barrier aluminum bag. However, we strongly recommend to solder the LEDs as soon as possible after opening the aluminum bag Notes about Re-sealing a Moisture-Barrier Aluminum Bag When vacuum-sealing an opened aluminum bag, if you find the moisture-indicator of the silica gel has changed to pink from blue (indicating a relative humidity of 0 % or more), please do not use the unused LEDs, the aluminum bag, or the silica gel. Notes about Opening a Re-sealed Moisture-Barrier Aluminum Bag When opening a vacuumed and re-sealed aluminum bag in order to use the remaining LEDs stored in the bag, if you find that the moisture-indicator of the silica has changed to pink, please do not use the LEDs. Marubeni America Corporation 9 Freedom Circle, Suite 0, Santa Clara, CA90 Tel: 08-0-00 Fax: 08-0-0 Email: sales@tech-led.com
Disclaimer Product specifications and data shown in this product catalog are subject to change without notice for the purposes of improving product performance, reliability, design, or otherwise. Product data and parameters in this catalog are typical values based on reasonably up-to-date measurements. Product data and parameters may vary by user application and over time. Products shown in this catalog are intended to be used for general electronic equipment. Products are not guaranteed for applications where product malfunction or failure may cause personal injury or death, including but not limited to life-supporting / saving devices, medical devices, safety devices, airplanes, aerospace equipment, automobiles, traffic control systems, and nuclear reactor control systems. 017.1 Marubeni America Corporation 9 Freedom Circle, Suite 0, Santa Clara, CA90 Tel: 08-0-00 Fax: 08-0-0 Email: sales@tech-led.com