catalogue 2017 catalogue 00 Cover_Mumme-Klein Catalog.indd 1

www.kleintools.com.au 2017 catalogue 2017 catalogue 2017 catalogue www.mummeproducts.com 00 Cover_Mumme-Klein Catalog.indd 1 2/14/17 5:03 PM

CUSTOM MANUFACTURING LOCALLY PRODUCED TOOL SOLUTIONS PREMIUM QUALITY PRODUCTS SMALL RUN CAPABILITY FORGING WELDING HEAT TREATING We ve been manufacturing in South Australia since 1936. Over the last 80 years we ve built our reputation for quality on custom manufacturing. We can create whatever tools you require for your job or your customer s unique requirements. Whether it s a one-off product or something to solve an industry-wide issue, we ll get the details right. Jump into our website or social media channels for further detail. 1

CONTENTS ALIGNING 3-6 BARS - DIGGING 7-9 BARS - LEVERING 10 BARS - MINING 11-12 BARS - WRECKING 13-14 BOLSTERS 15 CHISELS 16-17 COLD SET 18 DRILL SLEEVES 18 FENCING TOOLS 19 GRIPS 20 HAMMERS - STEEL 20-23 HAMMERS - NORMALISED 24-26 HAMMERS - BRASS 27 HAMMERS - COPPER 28 FILE HANDLES 29 PUNCHES 29-30 LADDERS AND TRESTLES 31 MASONRY 32 PICKS AND MATTOCKS 33-34 PEGS AND STAKES 35 RAKES 36 FLOOR SCRAPERS 37 SHOVELS 38-40 SOLDERING IRONS 41 BLACKSMITHS TONGS 42 WELDING HAMMERS 42 TYRE PRODUCTS 43-46 FOX WEDGES 47 JAMES WATT TOOLS 48 CHISELS 48 BRASS PUNCHES 49 CENTRE PUNCHES 50 INDUSTRIAL CENTRE PUNCHES 51 LONG PIN PUNCHES 53 EXTRA LONG PIN PUNCHES 54 STARTER DRIFTS 55 NAIL PUNCHES 56 PUNCH AND CHISEL SET 57 ROOFING PUNCHES 57 2

ALIGNING Barrel Drifts Used for aligning holes in construction. Also used for expanding holes in mild steel. Forged from tough alloy steel for a finer grain, giving greater tensile strength. Reduced likelihood of scoring, even when driven hard. Heat treated for toughness and durability. Product Code Length Diameter Weight 5BD12 160mm 12mm 0.12kg 5BD14 160mm 14mm 0.16kg 5BD16 160mm 16mm 0.17kg 5BD18 160mm 18mm 0.25kg 5BD19 160mm 19mm 0.28kg 5BD20 160mm 20mm 0.35kg 5BD22 180mm 22mm 0.50kg 5BD24 180mm 24mm 0.52kg 5BD25 180mm 25mm 0.54kg 5BD27 180mm 27mm 0.63kg 5BD30 200mm 30mm 0.80kg 5BD33 200mm 33mm 1.04kg Podger Bars Used for levering and aligning. Forged from tough carbon-manganese steel for maximum strength. Heel set to 40 for optimum levering, blade accurately ground to 30 for easy entry between surfaces. Hexagon profile bar used for greater control and to minimise bar roll. Product Code Dimensions Tip Size Weight 5POB37516 375mm x 16mm 6mm 0.55kg 5POB37520 375mm x 20mm 8mm 0.83kg 5POB45016 450mm x 16mm 7mm 0.68kg 5POB45020 450mm x 20mm 10mm 1.03kg 5POB60020 600mm x 20mm 9mm 1.43kg 5POB90020 900mm x 20mm 9mm 2.2kg 3

Podger Bars with Rubber Collared Grip ALIGNING Used for levering and aligning. Rubber safety collar fitted to help prevent product falling through mesh, decking, cracks etc. Forged from tough carbon-manganese steel for maximum strength. Heel set to 40 for optimum levering, blade accurately ground to 30 for easy entry between surfaces. Hexagon profile bar used for greater control and to minimise bar roll. Product Code Dimensions Tip Size Weight 5POBRG45016 450mm x 16mm 7mm 0.68kg 5POBRG45020 450mm x 20mm 10mm 1.03kg Podger Pins Pry Bar Used for aligning holes and expanding holes in mild steel. Forged from tough carbon manganese steel for maximum strength. Long tapered point for ease of aligning. For added safety forged head helps prevents pin being driven through hole. Product Code Length Diameter Weight 5POP16 375mm x 16mm 6mm 0.55kg 5POP19 375mm x 20mm 8mm 0.83kg 5POP22 450mm x 16mm 7mm 0.68kg 5POP25 450mm x 20mm 10mm 1.03kg 5POP30 600mm x 20mm 9mm 1.43kg Used for prying, separating flanges and aligning holes. Forged from tough carbon manganese steel for maximum strength. Finely ground curved chisel end for ease of entry between surfaces. Long tapered point for ease of aligning. Hexagon bar profile for greater control. Product Code Length Diameter Weight 5PRBP45016 450mm 16mm 0.76kg 4

ALIGNING Pry Bar with Rubber Collared Grip Used for prying, separating flanges and aligning holes. Rubber safety collar fitted to help prevent product falling through mesh, decking, cracks etc. Forged from tough carbon manganese steel for maximum strength. Finely ground curved chisel end for ease of entry between surfaces. Hexagon bar profile for greater control. Scaffold Hammer 5PRBPRG45016 450mm x 16mm 0.76kg Dual-purpose tool used for scaffold assembly. Forged and heat treated carbon manganese steel for maximum strength. Correctly balanced for comfort and ease of use. Forged with small flat on point to give better control in use. Hexagon profile for greater control. Product Code 5HSC Weight 1.08kg Spoon Bars Versatile bars used for levering, prying between surfaces, form work, moving pre-stressed concrete panels and aligning holes. Levers/prys with a rolling motion for better stability and reduced surface marking. Will lever right from the end of the taper as soon as pressure is applied. Finely ground blade end for ease of entry between surfaces. Long tapered point ideal for aligning. Full length heat treatment of shaft for toughness and durability. 5SB45016 450mm x 16mm 0.60kg 5SB60020 600mm x 20mm 1.23kg 5SB75022 750mm x 22mm 2.0kg 5SB115025 1150mm x 25mm 4.22kg 5SB135025 1350MM x 25mm 4.36 kg 5

Spoon Bars with Rubber Collared Grips ALIGNING Versatile bars used for levering, prying between surfaces, form work, moving prestressed concrete panels and aligning holes. Rubber safety collar fitted to help prevent product falling through mesh, decking, cracks etc. Levers/prys with a rolling motion for better stability and reduced surface marking. Will lever right from the end of the taper as soon as pressure is applied. Finely ground blade end for ease of entry between surfaces. Long tapered point ideal for aligning. Full length heat treatment of shaft for toughness and durability. 7SBRG45016 450mm x 16mm 0.60kg 7SBRG60020 600mm x 20mm 1.23kg 7SBRG75022 750mm x 22mm 2.00kg Starter Drifts Used for aligning work in heavy construction. Forged from tough carbon-manganese steel. Designed for driving with hammer. Taper is forged for finer grain, giving greater tensile strength. Hexagon profile for better control. All sizes available fitted with a rubber safety collar to help prevent product falling through mesh, decking, cracks etc. 5SDL30016 300mm x 16mm 0.44kg 5SDL45020 450mm x 20mm 1.03kg 5SDL45025 450mm x 25mm 1.58kg 5SDL45030 450mm x 30mm 2.16kg 7SDLRG30016 300mm x 16mm 0.44kg 7SDLRG45020 450mm x 20mm 1.03kg 7SDLRG45025 450mm x 25mm 1.58kg 7SDLRG45030 450mm x 30mm 2.16kg 6

BARS - DIGGING Crowbars - Hexagon Used for digging holes, breaking up rocks, clay and concrete. Forged from tough carbon manganese steel for maximum strength. Finely ground and sharpened chisel end. Accurately ground and sharpened diamond point end for easier digging, especially in abrasive soil like rocky ground which tends to self-sharpen the tool. Hexagon bar profile provides greater control. 1800mm x 30mm size available with welded steel safety collar fitted to help prevent product falling through mesh, decking, cracks etc. 5CB150025 1500mm x 25mm 6.12kg 5CB165025 1650mm x 25mm 6.70kg 5CB165030 1650mm x 30mm 9.50kg 5CB180025 1800mm x 25mm 7.35kg 5CB180030 1800mm x 30mm 10.45kg 5CBC180030 1800mm x 30mm with collar 10.45kg Used for digging holes, breaking up rocks, clay and Crowbars - Round concrete. Forged from tough carbon manganese steel for maximum strength. Finely ground and sharpened chisel end. Accurately ground and sharpened diamond point end for easier digging, especially in abrasive soil like rocky ground which tends to self-sharpen the tool. Round bar profile is easier on the hands for greater comfort. 1800mm x 27mm size available with welded steel safety collar fitted to help prevent product falling through mesh, decking, cracks etc. 5CBR180022 1800mm x 22mm 5.50kg 5CBR180025 1800mm x 27mm 7.75kg 5CBR180030 1800mm x 30mm 9.70kg 5CBRC180025 1800mm x 25mm with collar 7.75kg 7

Fence (Spud) Bars - Hexagon BARS - DIGGING Used for digging holes, breaking up rocks, clay and concrete. Forged from tough carbon manganese steel f or maximum strength. Finely ground and sharpened chisel end. Fence bar knobs are forged, not welded, and made to optimum size for tamping. Hexagon bar profile provides greater control. Some sizes available with welded steel safety collar fitted to help prevent product falling through mesh, decking, cracks etc. 5FB150025 1500mm x 25mm 6.50kg 5FB165025 1650mm x 25mm 7.01kg 5FB165030 1650mm x 30mm 10.15kg 5FB180025 1800mm x 25mm 7.77kg 5FB180030 1800mm x 30mm 11.05kg 5FBC180025 1800mm x 25mm with collar 7.77kg 5FBC180030 1800mm x 30mm with collar 11.05kg Fence (Spud) Bars - Round Used for digging holes, breaking up rocks, clay and concrete. Forged from tough carbon manganese steel for maximum strength. Finely ground and sharpened chisel end. Fence bar knobs are forged, not welded, and made to optimum size for tamping. Round bar profile is easier on the hands for greater comfort. 5FBR165025 1650mm x 27mm 7.55kg 5FBR180025 1800mm x 27mm 8.18kg 5FBR180030 1800mm x 30mm 10.25kg 8

Insulated Fence (Spud) Bar BARS - DIGGING Used for digging holes, breaking up rocks, clay and concrete. Forged from tough alloy steel. Finely ground and sharpened chisel end for digging holes. Non-conductive comfortable rubber coated grip bonded to the steel. Any damage to the insulation could result in a lowering of insulation abilities. 7IB1650 1650mm x 38mm OD 6.14kg Digging Tool Used for working in trenches, holes and pits where cables may be present. Blade end forged from tough alloy steel. Blade is welded for additional strength. This product is not recommended for levering. Fitted with tough hardwood handle. Heat treated for toughness and durability. Product Code Length Blade Width Weight 5DTWH 1570mm 70mm 3.85kg Pit Bars Blade end used for digging holes and trenches, removing tree roots and breaking up rocks. Knob end used for tamping soil down around posts. The blade is forged down to a fine edge with an 8 set, providing greater leverage no matter the depth of the hole. The deep welds holding the handle to the blade are stress relieved during forging to prevent it from breaking and the blade is heat treated for toughness and durability. Blade forged from spring alloy steel for the best strength and resilience. Product Code Dimensions Blade Width Weight 5PIB1800 1800mm x 22mm 65mm 7.12kg 5PIB1800HD 1800mm x 27mm 65mm 9.37kg 9

BARS - LEVERING Goose Neck Bar Used for levering and moving objects into place with a lift and swivel motion. Forged from tough carbon manganese steel. Diamond point and gooseneck ends for flexibility of use. Gooseneck set for improved leverage. Hexagon bar profile provides greater control. 5GNB180030 1800mm x 30mm 11.10kg Pinch Bars Used for levering and moving objects into place with a lift and swivel motion. Forged from tough carbon manganese steel. Heel offset to 40 for optimum lifting. Hexagon bar profile provides greater control. Heat treated blade for toughness and durability. 1800 x 25 available with welded steel safety collar fitted to help prevent product falling through mesh, decking, cracks etc. (Made to order) 5PB45016 450mm x 16mm 0.72kg 5PB60020 600mm x 20mm 1.53kg 5PB60025 600mm x 25mm 2.41kg 5PB75025 750mm x 25mm 3.04kg 5PB90025 900mm x 25mm 3.65kg 5PB150025 1500mm x 25mm 6.15kg 5PB150030 1500mm x 30mm 8.90kg 5PB165025 1650mm x 25mm 6.81kg 5PB165030 1650mm x 30mm 9.94kg 5PB180025 1800mm x 25mm 7.63kg 5PB180030 1800mm x 30mm 11.02kg 5PBC180025 1800mm x 25mm 7.63kg Heavy Duty Pry Bar Used for guiding and levering pre-cast concrete panels. Forged and heat treated spring steel blade for optimum strength. Lightweight 6kg bar for ease of use. Internally reinforced. Plastic cap inserted on the end to inhibit moisture and help prevent rust. 7PRBHD 1560mm x 80mm x 70mm 6.0kg 10

BARS - MINING Scaling Bars - Steel Used in the mining industry for prying overhanging rock. Forged from chrome alloy steel. Heat treated blades for toughness and durability. Hexagon bar profile provides greater control. Heel offset to 40 for optimum levering. Some sizes available with washer and end caps for added safety. Made to Order 7SC120019 1200mm x 20mm 3.12kg 7SC150019 1500mm x 20mm 3.91kg 7SC180019 1800mm x 20mm 4.68kg 7SC210019 2100mm x 20mm 5.45kg 7SC240019 2400mm x 20mm 6.24kg 7SC120022 1200mm x 22mm 2.97kg 7SC150022 1500mm x 22mm 3.41kg 7SC180022 1800mm x 22mm 3.84kg 7SC210022 2100mm x 22mm 4.26kg 7SC240022 2400mm x 22mm 4.70kg YSCW150019 1500mm x 19mm with washer and end caps 4.06kg YSCW210019 2100mm x 19mm with washer and end caps 5.60kg 11

Scaling Bars - Round Aluminium BARS - MINING Used in the mining industry for prying overhanging rock. Premium 6060 grade aluminium tube body for light weight and less user fatigue. Inserted steel ends forged from tough carbon manganese steel. Heel offset to 40 degrees for optimum levering. Round bar profile is easier on the hands for greater comfort. Product Code Length Weight 7SCT1800 1800mm 2.89kg 7SCT2400 2400mm 3.33kg 7SCT3050 3050mm 3.76kg 7SCT3660 3660mm 4.20kg 7SCT4320 4320mm 4.63kg Made to Order Scaling Bars - Hexagon Aluminium Used in the mining industry for prying overhanging rock. Premium 6060 grade aluminium tube body for light weight and less user fatigue. Inserted steel ends forged from tough carbon manganese steel. Heel offset to 40 degrees for optimum levering. Hexagon bar profile provides greater control. Product Code Length Weight 7SCTH1800 1800mm 2.97kg 7SCTH2400 2400mm 3.41kg 7SCTH3000 3000mm 3.84kg 7SCTH3600 3600mm 4.26kg 7SCTH4300 4300mm 4.70kg Made to Order 12

Traditional Wrecking Bars BARS - WRECKING Used for construction, demolition and wrecking work. Forged from tough carbon manganese steel. Unlike other wrecking bars on the market, the ends are finely ground for good lead in, making demolition work easier and quicker. The wide thin ends are less likely to damage timbers when removing them for restoration. The hexagon bar profile provides greater control. Open bend to get behind large timbers. Grooved claw for nail pulling. Utility Wrecking Bar 5WB45016 450mm x 16mm 0.97kg 5WB60020 600mm x 20mm 1.80kg 5WB75020 750mm x 20mm 2.23kg 5WB90020 900mm x 20mm 2.60kg Used for construction and carpentry work such as door fitting. Forged from tough spring steel. Finely ground wide ends reduce damage to timbers when removing for restoration work. Sharpened and heat treated claws easily grip nail shank so the nail head can be pulled through the timber. 5WBU 340mm x 30mm 0.60kg Multipurpose Wrecking Bar Used for construction and demolition work. Forged from tough spring steel. Open angle bend at one end for easy entry, opposite end is ideal for work in confined areas. Finely ground ends reduce damage to timbers when removing for restoration. Sharpened and heat treated claws easily grip nail shank so the nail head can be pulled through the timber. 5WBMP 300mm x 10mm 0.298kg 13

Gooseneck Wrecking Bars BARS - WRECKING Used for construction, demolition and wrecking work. Forged from tough spring steel. The ends are finely ground for good lead in, making demolition work easier and quicker. The wide thin ends are less likely to damage timbers when removing them for restoration. The hexagon bar profile provides greater control. Right angled bend for close work at perpendicular surfaces. Designed to be hit by a hammer for greater penetration of either end. The claws are sharpened inside the slot to grip the nail shank so the nail head can be pulled through the timber. Offset for greater leverage in confined spaces. 5WBG450 450mm x 16mm 0.85kg 5WBG600 600mm x 20mm 1.62kg 5WBG900 900mm x 20mm 2.24kg Right angled bend for close work at perpendicular surfaces. A gentle tap and the claw grips the nail shank easily. The sharpened claw grips the nail shank so the nail head is pulled right through the timber. Reno Bar Great for renovation or demolition work. Used for removing timber decking and floor boards with ease. Also used for removing and demolishing stud walls and dismantling pallets to recycle. The spring alloy steel blade has a finely ground edge to get into tight gaps making demolition work easier and quicker. The wide, thin ends are less likely to damage timbers when removing them for restoration. Ergonomic light weight tool set to the optimum angle for working on flooring, walls or ceilings. 5RENO 1350mm long with 210mm tines 140mm apart 3.0kg 14

BOLSTERS Brick Bolster Used for cutting bricks and concrete. Forged from one piece of tough carbon manganese steel. Heat treated blade for toughness and durability. Hardened blade will cut through bricks, concrete and even bolts with a sharp 60 cutting angle to give a neat cut. Finely ground with a straight cutting edge. Many inferior brands of bolster have a slight curve or bow to them, making it impossible to cut bricks without damaging them. Fitted with protective hand grip for safety. Product Code Blade Width Weight 5BBO 115mm 0.90kg Multipurpose Bolster A multipurpose tool for cutting, chiselling, tiling, chasing plaster and other renovation work. Forged from one piece of tough carbon manganese steel. Heat treated blade for toughness and durability. Hardened blade will cut through bricks, concrete and even bolts with a sharp 60 cutting angle to give a neat cut. Finely ground with a straight cutting edge. Many inferior brands of bolster have a slight curve or bow to them, making it impossible to cut bricks without damaging them. Fitted with protective hand grip for safety. Product Code Blade Width Weight 5EB 63mm 0.59kg Multipurpose Bolster - Long Handled A multipurpose tool for cutting, chiselling, tiling, chasing plaster and other renovation work. Forged from one piece of tough carbon manganese steel. Heat treated blade for toughness and durability. Hardened blade will cut through bricks, concrete and even bolts with a sharp 60 cutting angle to give a neat cut. Finely ground with a straight cutting edge. Many inferior brands of bolster have a slight curve or bow to them, making it impossible to cut bricks without damaging them. 450mm length handle to assist with hard to reach jobs. Product Code Blade Width Weight 5PB 63mm 1.18kg 15

CHISELS Alloy Cold Chisels Used for cutting high tensile steels and welds as well as most other metals, concrete and stone. Forged from chrome alloy steel for a harder blade with great resilience. Correctly hardened and tempered blade. Softer head is designed to mushroom, reducing the likelihood of high velocity chips. Accurately ground to the optimum 60 angle for cutting. Product Code Description Weight 5AC15013 150mm x 13mm 0.10kg 5AC17516 175mm x 16mm 0.20kg 5AC20020 200mm x 20mm 0.28kg 5AC23022 230mm x 22mm 0.50kg 5AC25025 250mm x 25mm 0.68kg 5ACSET5 Set 5-13mm, 16mm, 20mm, 22mm, 25mm 1.82kg 7ACPG25025 205mm x 25mm with protective grip. MTO. 0.70kg Alloy Engineers Chisels - Cross Cut (Cape) Used for removing oil seals, cutting in corners and in difficult or confined areas. Forged from chrome alloy steel for a harder blade with great resilience. Correctly hardened and tempered. Softer head is designed to mushroom, reducing the likelihood of high velocity chips. Accurately ground to the optimum angle for cutting. Made to Order 7CHC15013 150mm x 6.5mm 0.12kg 7CHC17516 175mm x 8mm 0.14kg 7CHC20020 200mm x 10mm 0.25kg 7CHC22522 225mm x 11mm 0.50kg 7CHC25025 250mm x 13mm 0.91kg Alloy Masonry Chisels Used for general cutting, masonry and renovation work. Forged from chrome alloy steel for a harder blade with great resilience. Correctly hardened and tempered blade. Softer head is designed to mushroom, reducing the likelihood of high velocity chips. Accurately ground to the optimum 60 angle for cutting. 5CM25025 250mm x 25mm 0.57kg 5CM25038 250mm x 38mm 0.59kg 5CM25050 250mm x 50mm 0.75kg 16

CHISELS Chisel Bars Used with a heavy hammer for masonry and demolition work. Forged from tough carbon manganese steel. Correctly hardened and tempered blade. Softer head is designed to mushroom, reducing the likelihood of high velocity chips. Ground and sharpened long tapered blade for better performance. 5CCB30025 300mm x 25mm 1.00kg 5CCB37525 375mm x 25mm 1.33kg 5CCB45025 450mm x 25mm 1.67kg Cold Chisels Used for general cutting including mild steel, bolts and concrete. Forged from tough carbon manganese steel. Correctly harderend and tempered blade. Softer head is designed to mushroom, reducing the likelihood of high velocity chips. Accurately ground to the optimum angle for cutting. 5CC15013 150mm x 13mm 0.14kg 5CC17516 175mm 16mm 0.20kg 5CC20020 200mm x 20mm 0.32kg 5CC23022 230mm x 22mm 0.57kg 5CC25025 250mm x 25mm 0.62kg Plugging Chisels Used for cutting mortar joints. Forged from tough carbon manganese steel. Reverse tapered blade to help avoid jamming. Accurately ground and sharpened cutting edge. 5PC 260mm x 16mm with 7mm blade 0.33kg 17

COLD SET Cold Set Used for striking with a sledge hammer to cut cold materials such as bolts, wire, concrete, flashing from die-casting. Forged from tough carbon manganese steel. Correctly hardened and tempered blade for durability. The head is softer and will mushroom to minimise the risk of chipping. 7SCSH225 225mm 1.75kg DRILL SLEEVES Morse Taper Drill Sleeves Used for adapting morse taper drills to fit larger machines. Precision turned from steel to exacting standards. Hardened and ground for long life. Heat treated for toughness and durability. Product Code Size Weight 5XD12 1 to 2 0.11kg 5XD23 2 to 3 0.18kg 5XD34 3 to 4 0.40kg 5XD45 4 to 5 1.04kg 5XD56 5 to 6 2.66kg 18

FENCING TOOLS Star Dropper Hammer Used for driving in star droppers, star pickets or fencing droppers, marker pegs, stakes and concreting stakes. Made from quality first grade materials. The heavy 8kg unit drives droppers very quickly and efficiently, with a comfortable solid hit and no bounce. Slides 710mm down the dropper. The solid steel handles and slug are welded together, not to the pipe, for greater strength. With a solid blow, our star dropper hammer is much quieter than others on the market, with no ringing sound. 5SDSH 870mm x 250mm x 85mm 8.68kg Star Dropper Remover Used for removing star droppers, star pickets or fencing droppers, selected pipes and steel pegs. The gripper is made from tough premium grade steel for durability and longevity. The gripper bites efficiently into the dropper for easy extraction without slipping. Easy to fit over droppers and will not bend them as they are removed. Long handle for excellent leverage. Compact design. Will remove star droppers from a minimum 600mm in length. 5SDR 920mm x 150mm x 1190mm 8.06kg 19

GRIPS Protective Grips Used to help prevent injury from mis-hits. Made from non-slip rubber compound. Gives comfortable grip on tools. Helps to absorb shock and vibration to minimise user fatigue. 5RPG16 To suit 17mm-18mm Diameter and 16mm AF Hex 0.08kg 5RPG20 To suit 19mm-22mm Diameter and 19-20mm AF Hex 0.09kg 5RPG27 To suit 26mm-27mm Diameter and 25mm AF Hex 0.09kg HAMMERS - STEEL Spiking Hammer - Fibreglass Handle Used in the rail industry for hammering rail road spikes. Used for breaking up rocks and concrete, and driving packing. Also known as a Spike Maul. Head is forged from carbon manganese steel and pinned through steel core fibreglass handle for added safety. Head is secured to the handle in accordance with Australian Standard 3797:1991. Comfortable thick rubber grip for better protection from shock and vibration - thicker at the base for a better grip. Lanyard hole in handle. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 5HSPSRH08 8 lb (3.62kg) 900mm 5.32kg 20

HAMMERS - STEEL Sledge Hammers - Fibreglass Handle Versatile and well-balanced sledge hammer for the construction industry. Head is forged from carbon manganese steel and pinned through steel core fibreglass handle for added safety. Head is secured to the handle in accordance with Australian Standard 3797:1991. Comfortable thick rubber grip for better protection from shock and vibration - thicker at the base for a better grip. Lanyard hole in handle. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 5HDFRH04400 4 lb (1.81kg) 400mm 2.36kg 5HSFRH04600 4 lb (1.81kg) 600mm 2.59kg 5HSFRH04 4 lb (1.81kg) 300mm 2.69kg 5HSFRH07 7 lb (3.17kg) 800mm 4.76kg 5HSFRH10 10 lb (4.53kg) 900mm 6.27kg 5HSFRH14 14 lb (6.35kg) 900mm 8.50kg 5HSFRH20 20 lb (9.07kg) 900mm 10.71kg 5HSFRH28 28lb (12.70kg) 900mm 14.13kg Sledge Hammers - Hardwood Handle A well balanced versatile sledge hammer for the building and construction industry. Forged from carbon manganese steel. Hardened and tempered faces for durability and longevity. Head is secured to the tough hardwood handle in accordance with Australian Standard 3797:1991. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 5HSH04 4 lb (1.81kg) 600mm 2.07kg 5HSH07 7 lb (3.17kg) 750mm 3.65kg 5HSH08 8 lb (3.62kg) 750mm 4.06kg 5HSH10 10 lb (4.53kg) 900mm 5.42kg 5HSH14 14 lb (6.35kg) 900mm 7.22kg 21

Club Hammer - Hardwood Handle HAMMERS - STEEL General purpose hammer. Head is forged from carbon manganese steel and secured to the tough hardwood handle in accordance with Australian Standard 3797:1991. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 5HCMH1.35 3 lb (1.35kg) 250mm 1.45kg Club Hammer - Fibreglass Handle General purpose hammer. Head is forged from carbon manganese steel and pinned through steel core fibreglass handle for added safety. Head is secured to the handle in accordance with Australian Standard 3797:1991. Comfortable thick rubber grip for better protection from shock and vibration - thicker at the base for a better grip. Lanyard hole in handle. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 5HCMFRH1.35 3 lb (1.35kg) 275mm 1.63kg 22

HAMMERS - STEEL English Club Hammer - Hardwood Handle General purpose hammer. Head is forged from carbon manganese steel and secured to the tough hardwood handle in accordance with Australian Standard 3797:1991. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 5HCEN 3 lb (1.35kg) 250mm 1.54kg Gympie (Drill) Hammer - Hardwood Handle Ideal for work in confined spaces Head is forged from carbon manganese steel. Head is secured to the tough hardwood handle in accordance with Australian Standard 3797:1991. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 5HDRH2.0 4.4 lb (2.0kg) 400mm 2.20kg Gympie (Drill) Hammer - Fibreglass Handle Ideal for work in confined spaces Head is forged from carbon manganese steel and pinned through steel core fibreglass handle for added safety. Head is secured to the handle in accordance with Australian Standard 3797:1991. Comfortable thick rubber grip for better protection from shock and vibration - thicker at the base for a better grip. Lanyard hole in handle. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 5HDRFRH2.0 4.4lbs (2.0kg) 275mm 2.44kg 23

HAMMERS - NORMALISED Normalised Sledge Hammers - Fibreglass Handle Head is forged from carbon manganese steel and pinned through steel core fibreglass handle for added safety. Head is normalised for a softer face (below 20HRC) that will mushroom, for applications where risk of chipping needs to be minimised. Head is secured to the handle in accordance with Australian Standard 3797:1991. Comfortable thick rubber grip for better protection from shock and vibration - thicker at the base for a better grip. Lanyard hole in handle. This product must be maintained in accordance with Australian Standard 3797:1991. Made to Order Product Code Head Weight Handle Length Overall Weight 5HSNFRH04 4 lb (1.81kg) 300mm 2.69kg 5HSNFRH07 7 lb (3.17kg) 800mm 4.76kg 5HSNFRH10 10 lb (4.53kg) 900mm 6.36kg 5HSNFRH14 14 lb (6.35kg) 900mm 8.21kg 7HSNFRH20 20 lb (9.07kg) 900mm 10.42kg 7HSNFRH28 28 lb (12.70kg) 900mm 14.10kg Normalised Sledge Hammers - Hardwood Handle Head is forged from carbon manganese steel. Head is normalised for a softer face (below 20HRC) that will mushroom, for applications where risk of chipping needs to be minimised. Head is secured to the tough hardwood handle in accordance with Australian Standard 3797:1991. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 5HSNH04 4 lb (1.81kg) 600mm 2.14kg 5HSNH07 7 lb (3.17kg) 750mm 3.74kg 5HSNH08 8lb (3.62kg) 750mm 4.06kg 5HSNH10 10 lb (4.53kg) 900mm 5.60kg 5HSNH14 14 lb (6.35kg) 900mm 7.40kg 24

HAMMERS - NORMALISED Normalised Club Hammer - Fibreglass Handle Head is forged from carbon manganese steel and pinned through steel core fibreglass handle for added safety. Head is normalised for a softer face (below 20HRC) that will mushroom, for applications where risk of chipping needs to be minimised. Head is secured to the handle in accordance with Australian Standard 3797:1991. Comfortable thick rubber grip for better protection from shock and vibration - thicker at the base for a better grip. Lanyard hole in handle. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 7HCMNFRH1.35 3 lb (1.35kg) 275mm 1.64kg Normalised Club Hammer - Hardwood Handle Head is forged from carbon manganese steel. Head is normalised for a softer face (below 20HRC) that will mushroom, for applications where risk of chipping needs to be minimised. Head is secured to the tough hardwood handle in accordance with Australian Standard 3797:1991. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 7HCMNH1.35 3 lb (1.35kg) 250mm 1.45kg Normalised Gympie (Drill) Hammer- Fibreglass Handle Ideal for work in confined spaces Head is forged from carbon manganese steel and pinned through steel core fibreglass handle for added safety. Head is normalised for a softer face (below 20HRC) that will mushroom, for applications where risk of chipping needs to be minimised. Head is secured to the handle in accordance with Australian Standard 3797:1991. Comfortable thick rubber grip for better protection from shock and vibration - thicker at the base for a better grip. Lanyard hole in handle. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 7HDRNFRH2.0 4.4 lb (2.0kg) 400mm 2.44kg 25

HAMMERS - NORMALISED Normalised Ball Pein Hammers - Hardwood Handle Head is forged from tough carbon manganese steel. Head is normalised for a softer face (below 20HRC) that will mushroom, for applications where risk of chipping needs to be minimised. Head is secured to the tough hardwood handle in accordance with Australian Standard 3797:1991. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 7HBPNH0.675 1.5 lb (0.675kg) 350mm 0.96kg 7HBPNH0.900 2 lb (0.900kg) 350mm 1.06kg 7HBPNH1.135 2.5lb (1.135kg) 400mm 1.38kg 7HBPNH1.360 3 lb (1.35kg) 400mm 1.54kg Normalised Ball Pein Hammers - Fibreglass Handle Head is forged from tough carbon manganese steel and pinned through steel core fibreglass handle for added safety. Head is normalised for a softer face (below 20HRC) that will mushroom, for applications where risk of chipping needs to be minimised. Head is secured to the handle in accordance with Australian Standard 3797:1991. Comfortable thick rubber grip for better protection from shock and vibration - thicker at the base for a better grip. Lanyard hole in handle. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 7HBPNFRH0.675 1.5 lb (0.675kg) 360mm 1.10kg 7HBPNFRH0.900 2 lb (0.900kg) 360mm 1.22kg 7HBPNFRH1.135 2.5lb (1.135kg) 400mm 1.60kg 7HBPNFRH1.360 3lb (1.35kg) 400mm 1.90kg Normalised Gympie (Drill) Hammer- Hardwood Handle Ideal for work in confined spaces Head is forged from carbon manganese steel and normalised for a softer face (below 20HRC) that will mushroom, for applications where risk of chipping needs to be minimised. Tough hardwood handle fitted in accordance with Australian Standard 3797:1991. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 7HDRNH2.0 4.4 lb (2.0kg) 400mm 2.20kg 26

HAMMERS - BRASS Brass Hammers - Fibreglass Handle Head is forged from pure brass and pinned through steel core fibreglass handle for added safety. Suitable for use in non-sparking environments and for applications where risk of chipping needs to be minimised. Head is secured to the handle in accordance with Australian Standard 3797:1991. Comfortable thick rubber grip for better protection from shock and vibration - thicker at the base for a better grip. Lanyard hole in handle. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 7HBRFRH04 4 lb (1.81kg) 400mm 2.22kg 7HBRFRH07 7 lb (3.17kg) 800mm 4.01kg 7HBRFRH10 10 lb (4.53kg) 900mm 5.55kg 7HBRFRH14 14 lb (6.35kg) 900mm 6.78kg Mumme Hammer Maintenance Hammer handles - when to replace a hammer with a loose handle. Mumme Fibreglass-handled hammers have a 20mm steel rod running the length of the handle and the head is secured with a roll pin through the steel rod. With overstrikes, this means the head is more likely to start to feel loose long before there is a risk of it coming off. As soon as there is movement of the head, the hammer must be removed from service and replaced with a new hammer. Checklist before using a hammer: 1. Is there excessive mushrooming? 2. Is there movement in the head? 3. Is there evidence of excessive overstriking? If there is evidence of any of the above, the hammer must be taken out of service and replaced with a new quality Mumme Products hammer. Mumme normalised, copper and brass hammers are all softer-faced and designed to mushroom and distort to reduce the likelihood of chipping. Once a hammer head has begun to distort it needs to be taken out of service and replaced with a new hammer. New normalised hammer 27

HAMMERS - COPPER Copper Hammers - Fibreglass Handle Suitable for use in non-sparking environments and for applications where risk of chipping needs to be minimised. Head is forged from pure electrolytic copper and pinned through steel core fibreglass handle for added safety. Head is secured to the handle in accordance with Australian Standard 3797:1991. Comfortable thick rubber grip for better protection from shock and vibration - thicker at the base for a better grip. Lanyard hole in handle. This product must be maintained in accordance with Australian Standard 3797:1991. Product Code Head Weight Handle Length Overall Weight 7HCFRH02 2 lb (0.90kg) 360mm 1.25kg 7HCFRH03 3 lb (1.35kg) 400mm 1.80kg 7HCFRH04 4 lb (1.81kg) 400mm 2.22kg 5HCFRH06900 6 lb (2.72kg) 900mm 3.74kg 5HCFRH07 7 lb (3.17kg) 800mm 4.09kg 5HCFRH10 10 lb (4.53kg) 900mm 5.77kg 5HCFRH14 14 lb (6.35kg) 900mm 7.57kg 5HCFRH28 28 lb (12.70kg) 900mm 13.27kg Copper Hammers - Hardwood Handle Suitable for use in non-sparking environmentsand for applications where risk of chipping needs to be minimised. Head is forged from pure electrolytic copper for a softer blow. Head is secured to the tough hardwood handle in accordance with Australian Standard 3797:1991. This product must be maintained in accordance with Australian Standard 3797:1991. Larger sizes are made to order. Product Code Head Weight Handle Length Overall Weight 5HCH01 1 lb (0.45kg) 300mm 0.50kg 5HCH02 2 lb (0.90kg) 350mm 1.14kg 5HCH03 3 lb (1.35kg) 400mm 1.68kg 5HCH04 4 lb (1.81kg) 400mm 2.13kg 5HCH07 7 lb (3.17kg) 750mm 3.74kg 5HCH14 14 lb (6.35kg) 900mm 7.40kg 28

FILE HANDLES File Handles Used to handle files and other suitable tools. Pre-drilled wooden handle with metal collar. Fits to handle by placing the tang of the file in the hole and tapping lightly on a bench until tight. Untreated softwood timber helps to absorb sweat and oil when using. Product Code Handle Length Weight 5FH075 75mm 0.02kg 5FH100 100mm 0.03kg 5FH125 125mm 0.04kg 5FH150 150mm 0.05kg Product Code Handle Length Weight 5FHPP075 75mm 0.04kg 5FHPP100 100mm 0.05kg 5FHPP125 125mm 0.07kg 5FHPP150 150mm 0.09kg PUNCHES Wire Rope Punches Used to safely drive out pins and keys in machinery. Made from 1045 grade carbon steel. Long two-handed rubber handle lessens shock from blows. Head attached with wire rope to reduce shock. Urethane ring around head to reduce likelihood of chipping from missed hits. Punch is heat treated for toughness and durability. Brass Punches Product Code Punch Dimensions Weight 7WRP13 13mm x 120mm 1.35kg 7WRP16 16mm x 120mm 1.45kg 7WRP19 19mm x 120mm 1.65kg 7WRP22 22mm x 120mm 2.00kg 7WRP25 25mm x 120mm 2.10kg 7WRP32 32mm x 120mm 2.40kg Used for driving where steel punch could cause damage, e.g. threads, shafts. Made from specially selected brass, correct composition for punch use. Knurled shaft for good grip. Product Code Punch Dimensions Weight 5BP29219 292mm x 19mm 0.7 kg 5BP29225 292mm x 25mm 1.75kg 5BP29232 292mm x 32mm 1.96kg 29

PUNCHES Roofing Punch Used for punching sheet metal prior to nailing or screwing. Also used as an awl for timber work. Forged from tough carbon manganese steel. Finely ground and sharpened point for accurate work. Hexagon profile for greater control. Product Code Length Weight 5RP 200mm 0.22kg Centre Punches For punching heavy duty materials. Forged from tough alloy steel. Large body makes for easier striking. Thick point gives larger centre dot to fit web of drill, to minimise drill run-off. Heat treated point for toughness and durability. 5CP13816 138mm x 16mm - 8mm point 0.18kg 5CP17520 175mm x 20mm - 10mm point 0.36kg Flooring Punches Used for driving nails below the surface of timber prior to sanding. Forged from tough carbon manganese steel. Accurately drilled 3mm cup for accurate punching. Taper forged for strength and soft head to mushroom for safety. Hexagon profile for greater control. 5NPH3 150mm x 16mm - 3mm cup 0.21kg 30

LADDERS AND TRESTLES Ladders Used in the building and construction industry. Where aluminium is not permitted (e.g. in underground mining), a steel ladder provides an option that is both lighter than a wooden ladder and is not a fire hazard. Fully welded all steel construction, with thick 1.6mm tubular steel for a longer life, unlike ladders made from thinner tubing which rust away quickly. Treaded step for better grip. Rated to 165kg, the unique design keeps centre of gravity inside base. Made to Australian Standard AS1892:1996. Product Code Height Weight Load Rating 5LI1800 1800mm 13.39kg 165kg 5LI2100 2100mm 15.23kg 165kg 5LI2400 2400mm 18.00kg 165kg Trestles Used in the building and construction industry. Where aluminium is not permitted (e.g. in underground mining), a steel ladder provides an option that is both lighter than a wooden ladder and is not a fire hazard. Fully welded all steel construction, with thick 1.6mm tubular steel for a longer life, unlike ladders made from thinner tubing which rust away quickly. Extremely rigid and stable. Extra heavy duty load rating of up to 250kg* Made to Australian Standard AS1892:1996. Product Code Height Weight *Load Rating 5TI900 900mm 9.72kg 250kg 5TI1200 1200mm 12.80kg 250kg 5TI1800 1800mm 17.22kg 200kg 5TI2400 2400mm 22.90kg 150kg 31

MASONRY Scutch Combs and Holders Used for cleaning, shaping and chasing masonry, including stone and plaster. Large head forged with sufficient material to support comb for superior strength. Machined slot for accurate blade fitting. Great for renovation, removing cement to replace tiles, cleaning bricks etc. This product must be maintained in accordance with Australian standard 3797:1991 Scutch Comb Holders Product Code Comb Width Weight 5SHWC25 25mm 0.54kg 5SHWC38 38mm 0.60kg 5SHWC50 50mm 0.70kg Scutch Hammer Scutch Combs Product Code Comb Width Weight 5SC25 25mm 0.01kg 5SC38 38mm 0.02kg 5SC50 50mm 0.03kg Used for cleaning, shaping and chasing masonry, including stone and plaster. Large head forged with sufficient material to support comb for added strength. Machined slot for accurate blade fitting. Great for renovation, removing cement to replace tiles, cleaning bricks etc. This product must be maintained in accordance with Australian standard 3797:1991 Available with hardwood or steel core fibreglass handle Made to Order Product Code Handle Slot Width Weight 5HSCH38 Hardwood 38mm 1.38kg 5HSCFRH38 Fibreglass 38mm 1.38kg Dutch Pins Plasterer s tool for clamping level boards. Can also be driven into timber posts for levelling. Forged from tough carbon manganese steel. 125mm long square shaft for better locking control. Point is heat treated for toughness and durability. Product Code 5DP Weight 0.17kg 32

PICKS AND MATTOCKS Mattock Cutter Used for digging, breaking up soil and clay, cutting roots etc. Wide blade for digging trenches and offset chopping blade for cutting through roots. Forged from tough carbon manganese steel. The blades are correctly curved and weighted for easier digging and less stress on your back. Unlike inferior versions on the market, our picks and mattocks have properly ground and sharpened cutting edges to minimise effort. The blades are correctly heat treated for toughness and durability. Product Code 5PPMC Weight 5 lb (2.26kg) Mattock Pick All Purpose pick for breaking up soil and clay, digging and cutting roots. Forged from tough carbon manganese steel. The blades are correctly curved and weighted for easier digging and less stress on your back. Unlike inferior versions on the market, our picks and mattocks have properly ground and sharpened cutting edges to minimise effort. The blades are correctly heat treated for toughness and durability. Product Code 5PPMP Weight 5 lb (2.26kg) Miners Pick Used for digging, breaking up soil and clay, cutting roots etc. Sharp pointed ends used for mineral exploration and gemstone fossicking. Forged from tough carbon manganese steel. Unlike inferior versions on the market, our picks and mattocks have properly ground and sharpened points and cutting edges to minimise effort. The ends are correctly heat treated for toughness and durability. Product Code 5PPMP1.125 Weight 1.125kg 33

PICKS AND MATTOCKS Plumbers Pick Used for digging, breaking up soil and clay, cutting roots etc. Double chisel-ended for trenching and digging in rocky ground. Forged from tough carbon manganese steel. The blades are correctly curved and weighted for easier digging and less stress on your back. Unlike inferior versions on the market, our picks and mattocks have properly ground and sharpened cutting edges to minimise effort. The blades are correctly heat treated for toughness and durability. Product Code Weight Pack Qty 5PP 6 lb (2.72kg) 2 Road Pick Chisel and pointed ends used for roadworks, digging, breaking up soil, clay, asphalt and other hard surfaces. Used for digging, breaking up soil and clay, cutting roots etc. Forged from tough carbon manganese steel. The blades are correctly curved and weighted for easier digging and less stress on your back. Unlike inferior versions on the market, our picks and mattocks have properly ground and sharpened cutting edges to minimise effort. The blades are correctly heat treated for toughness and durability. Product Code Weight Pack Qty 5PPRP 6 lb (2.72kg) 2 34

PEGS AND STAKES Marquee Pegs Used for pegging out marquees, tents etc. Forged from tough spring steel. Sharpened forged point. Forged head with knob. Produced from 22mm steel for use with 24mm plate holes YMP80022 800mm x 22mm 2.97kg Made to Order Concrete Stakes Used for pegging out concreting. Forged from tough spring steel. Chamfered head. Sharp forged point. Custom sizes available upon request. Made to Order 7CS60016 600mm x 16mm 0.94kg 7CS75016 750mm x 16mm 1.15kg 7CS90016 900mm x 16mm 1.40kg 7CS90022 900mm x 22mm 2.77kg 7CS120019 1200mm x 19mm 2.59kg YCS120016 1200mm x 16mm 1.87kg 35

RAKES Bitumen Rake Heavy duty rake used for spreading hot asphalt prior to rolling. Forged from tough carbon manganese steel. Long metal shank for extended life. Tough hardwood handle from sustainable timber source. Long 1950mm overall length to maintain safe distance from hot asphalt. Product Code Description Weight 5RB16 16 Tooth Hot Bitumen Rake 2.40kg Garden Rake General purpose rake used for everyday gardening and landscaping Forged from tough carbon manganese steel Tough hardwood handle from sustainable timber source. Long 1500mm handle. Fire / BMX Rake Product Code Description Weight 5RG16 16 Tooth Garden Rake 1.52kg Combination hoe and rake used to construct fire control lines, bush tracks and for clearing undergrowth and other surface debris from under bush and scrub. Spring Steel blade for racking of dirt, gravel and understory with a reverse hoe to dig into the soil. It can also be used to tamp down dirt, cut branches off and chop vegetation litter. Formed and sharpened for digging and clawing, and heat treated for toughness and durability. Extended ferrule giving greater strength and rigidity with a tough hardwood handle from sustainable timber sources. 5RF Length 1200mm 230mm Hoe 260mm Rake 90mm Tines 0.21kg 36

Floor Scrapers - T Handle FLOOR SCRAPERS Used for general cleaning and scraping, including cement boards. Blade made from 316 stainless steel which is suitable for use in marine, surgical or food preparation environments. Press fit blades are double-sided and easily reversed, so you get double the life from a single blade. With a T-handle for better control and ease of use. Replacement blades available separately. Floor Scraper Blades Product Code Blade Width Weight 5SF150 150mm 1.62kg 5SF200 200mm 1.75kg 5SF300 300mm 2.00 kg Used for general cleaning and scraping, including cement boards. Blade made from 316 stainless steel which is suitable for use in marine, surgical or food preparation environments. Press fit blades are double-sided and easily reversed, so you get double the life from a single blade. Product Code Blade Width Weight 5SFB150 150mm 0.15kg 5SFB200 200mm 0.23kg Bent Ship Scraper Universal scraping tool made from Spring Steel for toughness and durability. 5SB 250mm x 45mm TBA 37

SHOVELS Grain/Mulch Shovel Used for shovelling grain, bark and other light materials. Pressed from lightweight, strong aluminium alloy. Large capacity blade, ribbed for added strength. Ergonomically designed hardwood D handle for ease of use and comfort. Good handle length for excellent leverage and shovelling performance. Product Code 5SHGD Weight 1.75kg Plumbers Shovel Popular pointed shovel used for digging in gravelly and stony soil. Blades are forged from tough and wear-resistant chrome alloy steel, and heat treated for toughness and durability. Has a treaded top making digging easier and safer. Three types of handle available to suit all purposes: Solid core long fibreglass handle. Solid core D fibreglass handle. Long hardwood handle from sustainable timber source. Product Code Handle Type Weight 5SHPLFGD D Fibreglass 2.00kg 5SHPLFGL Long Fibreglass 2.45kg 5SHPL Hardwood 2.39kg 38

SHOVELS Post Hole Shovel Used for digging trenches and holes. Blades are forged from tough and wear-resistant chrome alloy steel, and heat treated for toughness and durability. Has a treaded top making digging easier and safer. Three types of handle available to suit all purposes: Solid core long fibreglass handle. Solid core D fibreglass handle. Long hardwood handle from sustainable timber source. Product Code Handle Type Weight 5SHPHFGD D Fibreglass 2.10kg 5SHPHFGL Long Fibreglass 2.44kg 5SHPH Long Wooden 2.44kg Square Mouth Shovel Versatile shovel for loading and unloading, mixing concrete etc. Blades are forged from tough and wear-resistant chrome alloy steel, and heat treated for toughness and durability. Three types of handle available to suit all purposes: Solid core long fibreglass handle. Solid core D fibreglass handle. Long hardwood handle from sustainable timber source. Product Code Handle Type Weight 5SHSMFGD D Fibreglass 2.10kg 5SHSMFGL Long Fibreglass 2.55kg 5SHSML Hardwood 2.32kg 39

SHOVELS Spade Straight bladed spade used for squaring the sides of trenches and beds. Blades are forged from tough and wear-resistant chrome alloy steel, and heat treated for toughness and durability. Has a treaded top making digging easier and safer. Three types of handle available to suit all purposes: Solid core long fibreglass handle. Solid core D fibreglass handle. Long hardwood handle from sustainable timber source. Product Code Handle Type Weight 5SPFGD D Fibreglass 2.00kg 5SPFGL Long Fibreglass 2.51kg 5SPL Hardwood 2.57kg THICK NYLON COATING TO PREVENT SPLINTERS cross-section of fibreglass handle SOLID FIBREGLASS CORE 40

SOLDERING IRONS Soldering Irons Used for soldering sheet metal and metal products. Forged from pure electrolytic copper. Ground points for easier tinning. Rod is impressed and copper head forged on it. Product Code Head Weight Overall Weight 7SIH08 8 oz (0.23kg) 0.29kg 7SIH12 12 oz (0.34kg) 0.40kg 7SIH16 16 oz (0.45kg) 0.56kg 7SIH20 20 oz (0.57kg) 0.65kg 7SIH24 24 oz (0.68kg) 0.70kg 7SIH32 32 oz (0.91kg) 0.98kg 7SIH40 40 oz (1.13kg) 1.20kg Made to Order SOLDERING IRONS: THE ORIGINAL MUMME PRODUCT The Mumme Products brand is celebrating 80 years of manufacturing hand tools in Australia. The Mumme Family have produced forged hand tools in South Australia for three generations and are Australia s leading forged hand tool manufacturer. The business started during the Depression of the 1930s when the late Bill Mumme, a tool smith was having difficulty finding work. He began forging copper soldering irons, for the Defence industry. Soldering irons remained the principal priority of the business during WWII as part of the war effort. 80 years later, we re still making them! 41

Blacksmiths Tongs - Flat Nose BLACKSMITHS TONGS Used for holding hot work, loading kilns etc. Designed for best use with flat material. Forged from tough carbon manganese steel. Reins will take heavy pressure when gripping without bending. Tapered beak for easier pick up. Product Code Length Weight 5BTF350 350mm 1.06kg 5BTF450 450mm 1.37kg 5BTF600 600mm 1.42kg WELDING HAMMERS Welding Hammers Used for chipping off slag and spatter around welds, especially in holes and difficult corners. Also suitable for peening welds of hard facing cast iron. The ends are heat treated for toughness and durability, and are sharp and finely pointed to access small areas and corners. Many welding hammers produced by cheap machining have thick ends that blunt easily and will not penetrate the small holes and corners where trapped slag can allow water to collect, causing corrosion of the metal and eventual weld failure. Our forged welding hammers are welded to the handle at the right point for proper balance, unlike inferior brands which are just welded in the centre, and are uncomfortable to work with. Welding is covered by a standard or code all over the world, and a Mumme Products welding hammer is the one that will effectively do the job to the standard. Available with a traditional Spring Grip to lessen shock, with a convenient loop for hanging. Available with a ribbed Rubber Grip handle for comfort and insulation from radiant heat whilst welding. Made from first grade high carbon spring steel. Product Code Grip Type Weight 5WHSP Spring 0.45kg 5WHRG Rubber 0.52kg 42

Bead Breaker Slide Hammers TYRE PRODUCTS STANDARD Used for breaking beads on car and truck tyres. Made from tough steel with hexagon shaft for excellent control. Well balanced heavy unit with the weight where it is needed most - in the striker. Hardened and tempered foot for toughness and durability. Good length to minimise back strain. Designed to stand up to the toughest conditions. They have been proved in the industrial and mining fields over and over again. HEAVY DUTY Handles for ease of use by one or two persons. The greater weight provides a heavier blow. Product Code 5BB122 7BB124 Weight 7.00kg 11.00kg Bead Breaker Hand Chisel Used for breaking tyre beads. Made from tough carbon manganese steel. Blade shaped for better penetration of bead. Ground end free of burrs to minimise tyre damage. 7BB130 350mm 2.07kg Cleat Bar Used for removing rims from hubs on large earthmoving vehicles. Forged from tough 4140 alloy steel. Heat treated for toughness and durability. Forged and ground ends for easier entry. Product Code Length Weight 7CL900 900mm 2.40kg 43

TYRE PRODUCTS Tyre Lever Used for removal and fitting of 4WD, car and truck tyres. Forged from tough chrome alloy steel. Heat treated for toughness and durability. Fine tapered and ground ends for easier use and to lessen likelihood of damage to tyres. Product Code Length Weight 5TL620 620mm 1.14kg Heavy Duty Tyre Lever Used for removal and fitting of 4WD, car and truck tyres. Forged from tough chrome alloy steel. Heat treated for toughness and durability. Fine tapered and ground ends for easier use and to lessen likelihood of damage to tyres. Product Code Length Weight 5TL600HD 600mm 1.50kg Tyre Lever - Flat - Straight Tyre Lever Flat - Straight, for Transport and similar Tyres. Forged from tough spring steel. Correctly hardened and tempered to be tough and resilient. Finely tapered and ground ends for easier use and to help prevent tyre damage. Product Code Length Weight 5MTL1F 800mm 1.83 kg 44

TYRE PRODUCTS Tyre Lever- Flat - Bent Tyre Lever Flat - Bent, for Transport and similar Tyres. Forged from tough spring steel. Correctly hardened and tempered to be tough and resilient. Finely tapered and ground ends for easier use and to help prevent tyre damage. Product Code Length Weight 5MTL2F 745mm 1.67 kg Tyre Lever - Rim Tool Tyre Lever, Rim Tool for Transport and Agriculture. Forged from tough spring steel. Correctly hardened and tempered for toughness and durability. Finely tapered and ground ends for easier use and to help prevent tyre damage. Product Code Length Weight 5TLR 600mm 1.50kg Tyre Lever - Swan Neck Tyre Lever for Earthmoving and Heavy Machinery. Forged from tough spring steel. Correctly hardened and tempered to be tough and resilient. Finely tapered and ground ends for easier use and to help prevent tyre damage. Product Code Length Weight 5TLSW 740mm 2.37kg 45

TYRE PRODUCTS Tyre Levers - Tubeless Truck Removal Straight Halte Bar. Used for removal of tubeless truck tyres. Forged from tough alloy steel. Fine tapered and ground ends to help eliminate damage to tyre. Good length for great leverage. Product Code 5MTL1 Weight 2.34kg Tyre Levers - Tubeless Truck Fitting Curved Face Bar. Used for fitting of tubeless truck tyres. Forged from tough alloy steel. Fine tapered and ground ends to help eliminate damage to tyre. Good length for great leverage. Product Code 5MTL2 Weight 2.34kg Tyre Lever - Long Long Tyre Lever for Transport and Agriculture. Forged from tough spring steel. Correctly hardened and tempered to be tough and resilient. Finely tapered and ground ends for easier use and to help prevent tyre damage. Product Code Length Weight 5TLWL 1030mm 3.05 kg 46

FOX WEDGES Fox Wedges Used for splitting crankcases, flanges and mating surfaces. Also used for packing machinery and structures level before fixing. Forged and ground blade with fine edge for easy entry. Heat treated for toughness and durability. Stainless Steel Also used in the marine environment because of its corrosion-resistant properties. Forged from 304 grade stainless steel for greater toughness and non-magnetic properties. 5FW07538 75mm x 38mm x 12mm 0.16kg Product 5FW10025 Code 100mm Dimensions x 25mm x 8mm Weight 0.10kg 5FW07538 5FW17550 175mm x 38mm 50mm x 12mm 0.16kg 0.46kg 5FW10025 5FW27050 270mm 100mm x 50mm 25mm x 25mm 8mm 0.10kg 1.83kg 5FW17550 5FWSS07538 175mm x 38mm 50mm x 12mm 0.46kg 0.16kg 5FW27050 5FWSS10025 270mm 100mm x 50mm 25mm x 25mm 8mm 1.83kg 0.10kg 5FWSS07538 5FWSS17550 175mm x 38mm 50mm x 12mm 0.16kg 0.46kg 5FWSS10025 100mm x 25mm x 8mm 0.10kg 5FWSS17550 175mm x 50mm x 12mm 0.46kg Bursting Chisel (Wedge) - Stainless Steel Used for splitting crankcases, flanges and mating surfaces. Can be used in conjunction with Fox Wedges for safer splitting. Also used for packing machinery and structures level before fixing. Used for working with stainless steel to avoid contamination. Ideal for use in marine applications where corrosion is possible. Forged from 316 grade stainless steel. Long finely tapered and ground blade. Head is normalised, designed to mushroom, not chip, for safety. 7BCSS25 100 mm x 25mm x 19 mm 0.57kg 47

JAMES WATT TOOLS Chisels Used for cutting materials such as heavy duty bolts and for splitting welds. Made from tough chrome alloy steel for heavy duty use. Cutting edge is precision ground to optimum angle. Correctly heat treated for best performance. Alloy Cold Chisels 4CA12 12mm 0.09kg 4CA16 16mm 0.14kg 4CA19 19mm 0.24kg 4CA22 22mm 0.33kg 4CA25 25mm 0.40kg Alloy Cold Chisels Pre - Packed 4CA10PP 10mm 0.07kg 4CA12PP 12mm 0.10kg 4CA16PP 16mm 0.15kg 4CA19PP 19mm 0.25kg 4CA22PP 22mm 0.34kg 4CA25PP 25mm 0.41kg 4CASET5 5 Piece Set 1.30kg 4CASET3 3 Piece Set 0.81kg 48

JAMES WATT TOOLS Brass Punches Used for driving out bolts and shafts where damage to threads and surfaces could occur with steel. Industrial Quality. Knurled handle for a better grip. Select brass, correct composition for punch use. Brass Punches 4BP10 10mm 0.10kg 4BP12 12mm 0.14kg 4BP16 16mm 0.30kg 4BP19 19mm 0.48kg 4BP25 25mm 0.85kg Brass Punches Pre - Packed 4BP10PP 10mm 0.11kg 4BP12PP 12mm 0.15kg 4BP16PP 16mm 0.31kg 4BP19PP 19mm 0.49kg 4BP25PP 25mm 0.86kg 4BPSET5 5 Piece Set 1.99kg 49

JAMES WATT TOOLS Centre Punches Used to mark the centre of a hole when drilling, to help prevent drill wander. Tough carbon manganese steel. Industrial Quality. Knurled handle for a better grip. Hardened and tempered for maximum toughness. Manufactured to comply with USA Standard ASME B107.410-2008 Centre Punches 4CP02 2mm 0.05kg 4CP02.5 2.5mm 0.05kg 4CP03 3mm 0.05kg 4CP04 4mm 0.05kg 4CP05 5mm 0.05kg Centre Punches Pre - Packed 4CP02PP 2mm 0.05kg 4CP02.5PP 2.5mm 0.05kg 4CP03PP 3mm 0.05kg 4CP04PP 4mm 0.05kg 4CP05PP 5mm 0.05kg 4CPSET5 5 Piece Set 0.25kg 50

JAMES WATT TOOLS Industrial Centre Punches Used with harder steels to mark the centre of a hole when drilling, to help prevent drill wander. Super tough spring alloy shaft for punching stainless steel and high tensile spring steel plate. Industrial Quality. Knurled handle for a better grip. Hardened and tempered for maximum toughness. Precision ground point. Heavy Duty Centre Punches 4CPHD04 4mm 0.06kg 4CPHD05 5mm 0.09kg 4CPHD06.5 6.5mm 0.10kg 4CPHD08 8mm 0.14kg 4CPHD10 10mm 0.20kg Heavy Duty Centre Punches Pre - Packed 4CPHD04PP 4mm HD 0.07kg 4CPHD05PP 5mm HD 0.10kg 4CPHD06.5PP 6.5mm HD 0.11kg 4CPHD08PP 8mm HD 0.15kg 4CPHD10PP 10mm HD 0.21kg 4CPHDSET5 5 Piece Set 0.63kg 51

JAMES WATT TOOLS Pin Punches Used to drive out pins. Tough and resilient shaft made from high quality tool steel. For maximum strength the shaft is pressed into the handle with an interference fit. Industrial Quality. Knurled handle for a better grip. Hardened and tempered for maximum toughness. Manufactured to comply with USA Standard B107.410-2008. Short Pin Punches 4PPS02 2mm 0.05kg 4PPS02.5 2.5mm 0.05kg 4PPS03 3mm 0.05kg 4PPS04 4mm 0.05kg 4PPS05 5mm 0.05kg 4PPS06 6mm 0.05kg 4PPS06.5 6.5mm 0.05kg Short Pin Punches Pre - Packed 4PPS02PP 2mm 0.05kg 4PPS02.5PP 2.5mm 0.05kg 4PPS03PP 3mm 0.05kg 4PPS04PP 4mm 0.06kg 4PPS05PP 5mm 0.06kg 4PPS06PP 6mm 0.06kg 4PPS06.5PP 6.5mm 0.06kg 4PPSSET7 7 Pice Set 0.38kg 52

JAMES WATT TOOLS Long Pin Punches Used to drive out pins. Tough and resilient shaft made from high quality tool steel. For maximum strength the shaft is pressed into the handle with an interference fit. Industrial Quality. Knurled handle for a better grip. Hardened and tempered for maximum toughness. Manufactured to comply with USA Standard B107.410-2008. Long Pin Punches 4PPL02.5 2.5mm 0.06kg 4PPL03 3mm 0.06kg 4PPL04 4mm 0.06kg 4PPL05 5mm 0.07kg 4PPL06 6mm 0.07kg 4PPL06.5 6.5mm 0.08kg 4PPL08 8mm 0.11kg 44PPL10 10mm 0.16kg Long Pin Punches Pre - Packed 4PPL02.5PP 2.5mm 0.07kg 4PPL03PP 3mm 0.07kg 4PPL04PP 4mm 0.07kg 4PPL05PP 5mm 0.08kg 4PPL06PP 6mm 0.08kg 4PPL06.5PP 6.5mm 0.09kg 4PPL08PP 8mm 0.12kg 44PPL10PP 10mm 0.17kg 4PPLSET8 8 Pice Set 0.72kg 53

JAMES WATT TOOLS Extra Long Pin Punches Used to drive out pins where additional length and larger sizes are required. Tough and resilient shaft made from high quality tool steel. For maximum strength the shaft is pressed into the handle with an interference fit. Industrial Quality. Knurled handle for a better grip. Hardened and tempered for maximum toughness. Manufactured to comply with USA Standard B107.410-2008. Extra Long Pin Punches 4PPXL06 6mm 0.13kg 4PPXL09 9mm 0.20kg 4PPXL12 12mm 0.30kg 4PPXL15 15mm 0.46kg 44PPXL19 19mm 0.63kg Extra Long Pin Punches Pre - Packed 4PPXL06PP 6mm 0.15kg 4PPXL09PP 9mm 0.22kg 4PPXL12PP 12mm 0.32kg 4PPXL15PP 15mm 0.48kg 44PPXL19PP 19mm 0.68kg 4PPXLSET3 3 Pice Set 1.04kg 4PPXLSET5 5 Pice Set 1.81kg 54

JAMES WATT TOOLS Starter Drifts Used to start the removal of very tight pins. Also used to expand and align holes and remove drill hole burrs. Made from tough carbon manganese steel. Industrial Quality. Knurled handle for a better grip. Hardened and tempered for maximum toughness. Starter Drifts 4SD02 2mm 0.06kg 4SD03 3mm 0.06kg 4SD05 5mm 0.14kg 4SD06.5 6.5mm 0.14kg 4SD08 8mm 0.20kg 4SD10 10mm 0.21kg Starter Drifts Pre - Packed 4SD02PP 2mm 0.07kg 4SD03PP 3mm 0.07kg 4SD05PP 5mm 0.15kg 4SD06.5PP 6.5mm 0.15kg 4SD08PP 8mm 0.21kg 4SD10PP 10mm 0.22kg 4SDSET6 6 Piece Set 0.86kg 55

JAMES WATT TOOLS Nail Punches Used to drive nail heads below the surface. Made from tough carbon manganese steel. Industrial Quality. Knurled handle for a better grip. Hardened and tempered for maximum toughness. Nail Punches 4NP02 2mm 0.05kg 4NP02.5 2.5mm 0.05kg 4NP03 3mm 0.05kg 4NP04 4mm 0.05kg 4NP05 5mm 0.05kg 4FP05 5mm Flooring Punch 0.12kg Nail Punches Pre - Packed 4NP02PP 2mm 0.05kg 4NP02.5PP 2.5mm 0.05kg 4NP03PP 3mm 0.05kg 4NP04PP 4mm 0.05kg 4NP05PP 5mm 0.05kg 4FP05PP 5mm Flooring Punch Pre Packed 0.12kg 4NPSET5 Nail Punch 5 Piece Set 0.86kg 56

Made from tough carbon manganese steel. Industrial Quality. Knurled handle for a better grip. Hardened and tempered for maximum toughness. JAMES WATT TOOLS Roofing Punches Product Code Description Weight 4RPR Roofing Punch Round 0.16kg 4RPRPP Roofing Punch Round Pre Packed 0.17kg Punch and Chisel Set 6 piece combination punch and chisel set Contains: 4mm & 6mm Long Pin Punches, 6.5mm and 8mm Starter Drifts and 12mm & 19mm Chisels. Ideal apprentice or workshop starter kit. Industrial Quality. Hardened and tempered for maximum toughness. Product Code Description Weight 4PCSET6 6 Piece Set 0.82kg 57

For Your Professional Hand Tool Needs, Flip the Book Around 58