VS-6CPQ5PbF, VS-6CPQ5-N3 Schottky Rectifier, x 3 TO-47C PRODUCT SUMMRY Package TO-47C I F(V) x 3 V R 5 V V F at I F.67 V I RM max. 5 m at 5 C T J max. 75 C Diode variation Common cathode E S 3 node Base common cathode 3 Common cathode.5 mj node FETURES 75 C T J operation Low forward voltage drop High frequency operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Guard ring for enhanced ruggedness and long vailable term reliability Designed and qualified according to JEDEC-JESD47 Material categorization: For definitions of compliance please see www.vishay.com/doc?999 DESCRIPTION The VS-6CPQ5... center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 75 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MJOR RTINGS ND CHRCTERISTICS SYMBOL CHRCTERISTICS VLUES UNITS I F(V) Rectangular waveform 6 V RRM 5 V I FSM t p = 5 μs sine 3 V F 3 pk, T J = 5 C (per leg).67 V T J Range - 55 to 75 C VOLTGE RTINGS PRMETER SYMBOL VS-6CPQ5PbF VS-6CPQ5-N3 UNITS Maximum DC reverse voltage V R Maximum working peak reverse voltage V RWM 5 5 V BSOLUTE MXIMUM RTINGS PRMETER SYMBOL TEST CONDITIONS VLUES UNITS Maximum average per leg 3 forward current I F(V) 5 % duty cycle at T C = 5 C, rectangular waveform See fig. 5 per device 6 Maximum peak one cycle non-repetitive 5 µs sine or 3 µs rect. pulse Following any rated load 3 surge current per leg I FSM condition and with rated See fig. 7 ms sine or 6 ms rect. pulse V RRM applied 5 Non-repetitive avalanche energy per leg E S T J = 5 C, I S =, L = mh.5 mj Current decaying linearly to zero in μs Repetitive avalanche current per leg I R Frequency limited by T J maximum V =.5 x V R typical Revision: 7-Jul-3 Document Number: 9438 RE SUBJECT TO SPECIFIC DISCLIMERS, SET FORTH T www.vishay.com/doc?9
VS-6CPQ5PbF, VS-6CPQ5-N3 ELECTRICL SPECIFICTIONS PRMETER SYMBOL TEST CONDITIONS TYP. MX. UNITS Maximum forward voltage drop per leg See fig. Note () Pulse width < 3 μs, duty cycle < % V FM () 3.8.83 T J = 5 C 6.93.99 3.64.67 T J = 5 C 6.74.77 Maximum reverse leakage current per leg T J = 5 C μ I RM V R = Rated V R See fig. T J = 5 C 5 m Typical junction capacitance per leg C T V R = 5 V DC (test signal range khz to MHz) 5 C - 8 pf Typical series inductance per leg L S Measured lead to lead 5 mm from package body - 7.5 nh Maximum voltage rate of change dv/dt Rated V R - V/μs V THERML - MECHNICL SPECIFICTIONS PRMETER SYMBOL TEST CONDITIONS VLUES UNITS Maximum junction and storage temperature range T J, T Stg - 55 to 75 C Maximum thermal resistance, junction to case per leg Maximum thermal resistance, junction to case per package Typical thermal resistance, case to heatsink pproximate weight R thjc DC operation See fig. 4 DC operation.4 R thcs Mounting surface, smooth and greased.5.8 C/W 6 g. oz. minimum 6 (5) kgf cm Mounting torque maximum () (lbf in) Marking device Case style TO-47C (JEDEC) 6CPQ5 Revision: 7-Jul-3 Document Number: 9438 RE SUBJECT TO SPECIFIC DISCLIMERS, SET FORTH T www.vishay.com/doc?9
VS-6CPQ5PbF, VS-6CPQ5-N3 I F - Instantaneous Forward Current () T J = 75 C T J = 5 C T J = 5 C I R - Reverse Current (m)... T J = 75 C T J = 5 C T J = 5 C T J = C T J = 75 C T J = 5 C T J = 5 C.5..5..5 V FM - Forward Voltage Drop (V) Fig. - Maximum Forward Voltage Drop Characteristics (Per Leg). 4 6 8 4 6 V R - Reverse Voltage (V) Fig. - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) C T - Junction Capacitance (pf) T J = 5 C 4 6 8 4 6 V R - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) Z thjc - Thermal Impedance ( C/W). Single pulse (thermal resistance) D =.75 D =.5 D =.33 D =.5 D =....... t - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance Z thjc Characteristics (Per Leg) P DM Notes:. Duty factor D = t /t. Peak T J = P DM x Z thjc + T C t t Revision: 7-Jul-3 3 Document Number: 9438 RE SUBJECT TO SPECIFIC DISCLIMERS, SET FORTH T www.vishay.com/doc?9
VS-6CPQ5PbF, VS-6CPQ5-N3 llowable Case Temperature ( C) 8 7 6 5 4 3 Square wave (D =.5) 8 % rated V R applied See note () DC 5 5 5 3 35 4 45 verage Power Loss (W) 3 5 5 5 D =. D =.5 D =.33 D =.5 D =.75 DC RMS limit 5 5 5 3 35 4 45 I F(V) - verage Forward Current () I F(V) - verage Forward Current () Fig. 5 - Maximum llowable Case Temperature vs. verage Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) I FSM - Non-Repetitive Surge Current () t any rated load condition and with rated V RRM applied following surge t p - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L D.U.T. IRFP46 High-speed switch Current monitor R g = 5 Ω Freewheel diode 4HFL4S + V d = 5 V Fig. 8 - Unclamped Inductive Test Circuit Note () Formula used: T C = T J - (Pd + Pd REV ) x R thjc ; Pd = Forward power loss = I F(V) x V FM at (I F(V) /D) (see fig. 6); Pd REV = Inverse power loss = V R x I R ( - D); I R at V R = 8 % rated V R Revision: 7-Jul-3 4 Document Number: 9438 RE SUBJECT TO SPECIFIC DISCLIMERS, SET FORTH T www.vishay.com/doc?9
VS-6CPQ5PbF, VS-6CPQ5-N3 ORDERING INFORMTION TBLE Device code VS- 6 C P Q 5 PbF 3 4 5 6 7 3 4 5 6 7 - product - Current rating (6 = 6 ) - Circuit configuration: C = Common cathode - Package: P = TO-47 - Schottky Q series - Voltage code (5 = 5 V) - Environmental digit PbF = Lead (Pb)-free and RoHS compliant -N3 = Halogen-free, RoHS compliant, and totally lead (Pb)-free ORDERING INFORMTION (Example) PREFERRED P/N QUNTITY PER T/R MINIMUM ORDER QUNTITY PCKGING DESCRIPTION VS-6CPQ5PbF 5 5 ntistatic plastic tube VS-6CPQ5-N3 5 5 ntistatic plastic tube Dimensions Part marking information LINKS TO RELTED DOCUMENTS TO-47C PbF TO-47C -N3 www.vishay.com/doc?9554 www.vishay.com/doc?956 www.vishay.com/doc?957 Revision: 7-Jul-3 5 Document Number: 9438 RE SUBJECT TO SPECIFIC DISCLIMERS, SET FORTH T www.vishay.com/doc?9
TO-47C - 5 mils L/F Outline Dimensions DIMENSIONS in millimeters and inches B () R/ Q (3) E S Ø K M D B M (6) Φ P (Datum B) D Φ P x R () D D (4) 3 D Thermal pad 4 (5) L C L See view B (4) E. M D B M x b 3 x b. M C M b4 x e C View - Plating (b, b3, b5) Base metal DDE E (c) c C C (b, b, b4) (4) Section C - C, D - D, E - E View B SYMBOL MILLIMETERS INCHES MILLIMETERS INCHES NOTES SYMBOL MIN. MX. MIN. MX. MIN. MX. MIN. MX. NOTES 4.65 5.3.83.9 D.5.35..53..59.87. E 5.9 5.87.6.65 3.7.37.46.54 E 3.46 -.53 - b.99.4.39.55 e 5.46 BSC.5 BSC b.99.35.39.53 Ø K.54. b.65.39.65.94 L 4. 6..559.634 b3.65.34.65.9 L 3.7 4.9.46.69 b4.59 3.43..35 Ø P 3.56 3.66.4.44 b5.59 3.38..33 Ø P - 7.39 -.9 c.38.89.5.35 Q 5.3 5.69.9.4 c.38.84.5.33 R 4.5 5.49.78.6 D 9.7.7.776.85 3 S 5.5 BSC.7 BSC D 3.8 -.55-4 Notes () Dimensioning and tolerancing per SME Y4.5M-994 () Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed.7 mm (.5") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D and E (5) Lead finish uncontrolled in L (6) Ø P to have a maximum draft angle of.5 to the top of the part with a maximum hole diameter of 3.9 mm (.54") (7) Outline conforms to JEDEC outline TO-47 with exception of dimension c and Q Revision: -pr-7 Document Number: 9554 RE SUBJECT TO SPECIFIC DISCLIMERS, SET FORTH T www.vishay.com/doc?9
Legal Disclaimer Notice Vishay Disclaimer LL PRODUCT, PRODUCT SPECIFICTIONS ND DT RE SUBJECT TO CHNGE WITHOUT NOTICE TO IMPROVE RELIBILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. ll operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 7 VISHY INTERTECHNOLOGY, INC. LL RIGHTS RESERVED Revision: 8-Feb-7 Document Number: 9
Mouser Electronics uthorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: 6CPQ5 VS-6CPQ5PBF VS-6CPQ5-N3