Data Sheet: CLD-CT1183. Cree PLCC6 3-in-1 SMD LED CLP6C-RKW/AKW Data Sheet These SMD LEDs are packaged in an industry-standard PLCC6 package. These high-reliability and high-brightness LEDs are designed to work in a wide range of environmental conditions and are ideally suited for use in illumination applications. Their wide viewing angle makes these LEDs ideally suited for channel-letter or general-backlighting and illumination applications. The flat-top emitting surface makes it easy for these LEDs to mate with light pipes. FEATURES Size (mm): 6. x 5. Color and Typical Dominant Wavelength (nm):»» (618-63)»» Amber (584-596) APPLICATIONS Light Strip Channel Letter Backlight Luminous Intensity (mcd):»» CLP6C-RKW (355-71)»» CLP6C-AKW (355-9) Viewing Angle: 12 degrees Lead-Free RoHS-Compliant Subject to change without notice. 1
Absolute Maximum Ratings (T A = 25 C) Items Symbol Absolute Maximum Rating Unit /Amber Forward Current 3 x 8 ma Peak Forward Current Note P 3 x 2 ma Reverse Voltage V R 5 V Power Dissipation P D 3 x 24 mw Operation Temperature T opr -4 ~ +1 C Storage Temperature T stg -4 ~ +1 C Junction Temperature T J 11 C Junction/Ambient R THJA 3 x 25 C/W Junction/Solder Point R THJS 3 x 15 C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD Class 2 Note: 1. Pulse width.1 msec, duty 1/1. Typical Electrical & Optical Characteristics (T A = 25 C) Characteristics Color Symbol Condition Unit Minimum Typical Maximum Forward Voltage /Amber V F = 5 ma V 2.4 3. Reverse Current /Amber I R V R = 5 V μa 1 Dominant Wavelength λ D = 3 x 5 ma nm 618 624 63 Amber λ D = 3 x 5 ma nm 584 591 596 Luminous Intensity I V = 3 x 5 ma mcd 355 48 Amber I V =3 x 5 ma mcd 355 5 5% Power Angle /Amber 2θ½ = 3 x 5 ma deg 12 Copyright 29 All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of 2 CLD-CT1183.
Intensity Bin Limit ( = 3 x 5 ma) (CLP6C-RKW) Bin Code Min. (mcd) Max. (mcd) Yb 355 45 Z 45 56 A 56 71 Amber (CLP6C-AKW) Bin Code Min. (mcd) Max. (mcd) Yb 355 45 Z 45 56 A 56 71 B 71 9 Tolerance of measurement of luminous intensity is ±1%. Color Bin Limit ( = 3 x 5 ma) Bin Code Min. (nm) Max. (nm) RA 618 63 Amber Bin Code Min. (nm) Max. (nm) AA 584 596 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright 29 All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of 3 CLD-CT1183.
Order Code Table* Color Kit Number Viewing Angle Luminous Intensity (mcd) Min. Dominant Wavelength CLP6C-RKW-CYbAAA3 12 355 71 RA 618 RA 63 CLP6C-RKW-CZAAA3 12 45 71 RA 618 RA 63 Max. Color Bin Min. (nm) Color Bin Max. (nm) Amber Color Kit Number Viewing Angle Luminous Intensity (mcd) Min. Dominant Wavelength Amber CLP6C-AKW-CYbBAA3 12 355 9 AA 584 AA 596 Amber CLP6C-AKW-CZBAA3 12 45 9 AA 584 AA 596 Max. Color Bin Min. (nm) Color Bin Max. (nm) Notes: The above kit numbers represent order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin codes and single colorbin codes will not be orderable. Please refer to the Cree LED Lamp Reliability Test Standards document for reliability test conditions. Please refer to the Cree LED Lamp Soldering & Handling document for information about how to use this LED product safely. Copyright 29 All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of 4 CLD-CT1183.
Graphs 1. 8. IF (ma) 2.5 2. (RELATIVE LUMINOUS INTENSITY) 6. 4. Yellow 1.5 1. Yellow 2..5. VF(V) 1.8 2. 2.2 2.4 2.6 2.8 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. -5 Vr(V) FIG.3 1 8-4 -3-2 VS. REVERSE VOLTAGE. -1-1 -2-3 -4-5 Ir(uA) RED &YELLOW REVERSE CURRENT IF(mA) Rth j-s=15 C/W. IF(mA) 2 4 6 8 1 FIG.2 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT 1% 8% 6% 4% 2% (RELATIVE LUMINOUS INTENSITY) Amber WAVELENGTH. 5% Power Angle : 12 (RELATIVE LUMINOUS INTENSITY) 1. % WL(nm) 3 4 5 6 7 8 9 FIG.4 RELATIVE LUMINOUS INTENSITY VS. 6 4 2 Rth j-a=25 C/W.5 Ta( C) 2 4 6 8 1 FIG.5 RED &YELLOW MAXIMUM FORWARD DCCURRENT VS AMBIENT TEMPERATURE (Tjmax=11 C) -9-6 -3 FIG.6 FAR FIELD PATTERN Angle 3 6 9 The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright 29 All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of 5 CLD-CT1183.
Mechanical Dimensions All dimensions are in mm. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 22/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 26. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright 29 All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of 6 CLD-CT1183.
Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the Cree LED Lamp Packaging Standard document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright 29 All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of 7 CLD-CT1183.
DESICCANT Packaging The boxes are not water-resistant, and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 9 pcs per reel. 1% 2% 3% 4% DANGEROUS DO NOT EAT 防潮珠 不可食 Copyright 29 All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of 8 CLD-CT1183.