Rackham Bookshelf L3908

Transcription

1 Thank you for shopping with GLT, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone s favourite way to spend their time, so we ve tried to make assembling this item as quick and painless as possible. Rackham ookshelf L3908 Hopefully our efforts will have been worthwhile and you ll sail through the whole process. ut if it all feels a bit too much like hard work, then we do have an assembly company we can recommend: the Flatpack onstruction ompany offers a nationwide service and can be contacted on or Good luck! few important pointers before you start: It might be worth checking on our website that there are no updates or revisions to these instructions (if we have had helpful feedback from other customers we pass it on via the product web page). Simply check the date and version number on the front of this leaflet against that of any site updates. Please read the instructions right through before you start, and check that all the components have been included in the pack; we find separating all the hardware into piles makes it easier to be sure that everything is present and correct. Make sure you have the right tools. llen keys are provided if required, but screw drivers and other tools are not. You ll find details of the tools you need at the beginning of the instructions. ssembly ifficulty easy - medium - hard one-person job V2 19/07/2017 It s a good idea to build the unit in the room where you are going to be using it, to avoid the need to move it after it s been assembled. o not throw away any packing materials until assembly is complete, just in case you accidentally discard smaller parts or hardware. 1

2 Safety Warnings: dult assembly required. Unassembled product contains small parts which may present a choking hazard. hildren should be kept away from the product during assembly to avoid any possible risk of injury. ssemble and use on a flat and level surface. To avoid possible injury from tipping - o not allow children to climb on this or multiple stacked units. Maximum weight load 12kg. o not overload. Serious or fatal crushing injuries can occur from furniture tipping over. nsure you secure this furniture product to the wall before you use it using the kit provided. If you have not received an anti-tip kit with your product please contact ustomer Services. heck all fixtures and fittings regularly and tighten as necessary. Please retain these instructions for future reference. ustomer Service: If you find that any components are missing or damaged, please do not begin assembly and do not use the item. Please contact GLT ustomer Services on immediately. We do stock spare hardware packs at our warehouse, so we should be able to send you a replacement pack immediately if required. Product are: Wipe clean using a soft damp cloth followed by a dry cloth. o NOT use cleaning products which contain ammonia, solvents or abrasive material. o NOT expose the item to extremes of heat and humidity. ould we do better? If there is anything you think could be improved in these instructions or in the assembly of this product we d be grateful if you could let us know; we ll pass any helpful hints and tips on to other customers via our website and update the instructions. ll you need to do is drop us a line at instructions@gltc.co.uk Thank you 2

3 omponent heck List Hardware for Step 1: 2x 35mmL cam dowels 1x ase Panel 1 x Top Panel 1 x ack Panel 1 x Right Side Panel STP 1: Using the screwdriver, insert 2x cam dowels () into the base panel (). 1 x Left Side Panel Hardware for Step 2: 2x 35mmL cam dowels 14x am owels 35mmL 14x am Locks 14mm dia You will need (not supplied) 12x owels 20mmL Phillips Head Screwdriver STP 2: Using the screwdriver, insert 2 x cam dowels () into the top panel (). 3

4 Hardware for Step 3: Hardware for Step 5: 2x cam locks 5x 35mmL cam dowels STP 3: Line up back panel () with base panel () and insert the cam dowels using 2x cam locks (). STP 5: Insert 5 x cam dowels () into right side panel (). Hardware for Step 4: Hardware for Step 6: 2x cam locks 5x 35mmL cam dowels STP 4: Line up top panel () with back panel () and insert the cam dowels using 2 x cam locks (). STP 6: Insert 5x cam dowels () into left side panel (). 4

5 Hardware for Step 7: 5x cam locks 6x dowels STP 9: Please be aware that we advise that safety straps are used to secure this to the wall. The 2x pilot holes indicated on the unit are to attach the anti tip straps included separately with this item. For details on securing the unit to the wall see the anti-tip kit guidance. STP 7: Turn the assembled panels (, & ) vertically. lign Right Side Panel () so it is resting on top of panels (, & ). Insert 5x cam locks () into Panels (, & ) and tighten with screwdriver. Please note that we advise that if stacked, only the top unit is required to be tethered to the wall. You may receive multiple anti-tip kits if multiple stacking units are purchased. Hardware for Step 8: 5x cam locks 6x dowels STP 8: Repeat the step above for left side panel. 5 opyright 2016 G.L.T.. Ltd. ll rights reserved. Great Little Trading ompany and GLT are registered trade marks of G.L.T.. Limited.